Due to LTO being backported to android's 5.10 branches first, the
backport of ba64beb174 dropped this. Now
that we have backports for checking AS_IS_LLVM, use that so that we
don't accidentally prevent LTO from being selectable.
Bug: 1938905
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Change-Id: I93fe13dba285bbb9fa1ae0e111bd2955c0b87c12
LLVM_IAS=1 controls enabling clang's integrated assembler via
-integrated-as. This was an explicit opt in until we could enable
assembler support in Clang for more architecures. Now we have support
and CI coverage of LLVM_IAS=1 for all architecures except a few more
bugs affecting s390 and powerpc.
This commit flips the default from opt in via LLVM_IAS=1 to opt out via
LLVM_IAS=0. CI systems or developers that were previously doing builds
with CC=clang or LLVM=1 without explicitly setting LLVM_IAS must now
explicitly opt out via LLVM_IAS=0, otherwise they will be implicitly
opted-in.
This finally shortens the command line invocation when cross compiling
with LLVM to simply:
$ make ARCH=arm64 LLVM=1
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Bug: 209655537
[nd: conflict in Documentation/kbuild/llvm.rst]
(cherry picked from commit f12b034afe)
Change-Id: I026d42aa40c83eb149c8e39fe91a0b0164ff71b0
We get constant feedback that the command line invocation of make is too
long when compiling with LLVM. CROSS_COMPILE is helpful when a toolchain
has a prefix of the target triple, or is an absolute path outside of
$PATH.
Since a Clang binary is generally multi-targeted, we can infer a given
target from SRCARCH/ARCH. If CROSS_COMPILE is not set, simply set
--target= for CLANG_FLAGS, KBUILD_CFLAGS, and KBUILD_AFLAGS based on
$SRCARCH.
Previously, we'd cross compile via:
$ ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make LLVM=1 LLVM_IAS=1
Now:
$ ARCH=arm64 make LLVM=1 LLVM_IAS=1
For native builds (not involving cross compilation) we now explicitly
specify a target triple rather than rely on the implicit host triple.
Link: https://github.com/ClangBuiltLinux/linux/issues/1399
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Arnd Bergmann <arnd@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Bug: 209655537
(cherry picked from commit 231ad7f409)
Change-Id: I6f61a4937e6af22deda66eeaac6c667c889dc683
With some of the changes we'd like to make to CROSS_COMPILE, the initial
block of clang flag handling which controls things like the target triple,
whether or not to use the integrated assembler and how to find GAS,
and erroring on unknown warnings is becoming unwieldy. Move it into its
own file under scripts/.
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Bug: 209655537
[nd: conflict in MAINTAINERS]
(cherry picked from commit 6f5b41a2f5)
Change-Id: I350ba8aaf924f7b373d25ef67260e6373a405d12
It is always safe to use the same compiler for the kernel and external
modules, but in reality, some distributions such as Fedora release a
different version of GCC from the one used for building the kernel.
There was a long discussion about mixing different compilers [1].
I do not repeat it here, but at least, showing a heads up in that
case is better than nothing.
Linus suggested [2]:
And a warning might be more palatable even if different compiler
version work fine together. Just a heads up on "it looks like you
might be mixing compiler versions" is a valid note, and isn't
necessarily wrong. Even when they work well together, maybe you want
to have people at least _aware_ of it.
This commit shows a warning unless the compiler is exactly the same.
warning: the compiler differs from the one used to build the kernel
The kernel was built by: gcc (GCC) 11.1.1 20210531 (Red Hat 11.1.1-3)
You are using: gcc (GCC) 11.2.1 20210728 (Red Hat 11.2.1-1)
Check the difference, and if it is OK with you, please proceed at your
risk.
To avoid the locale issue as in commit bcbcf50f52 ("kbuild: fix
ld-version.sh to not be affected by locale"), pass LC_ALL=C to
"$(CC) --version".
[1] https://lore.kernel.org/linux-hardening/efe6b039a544da8215d5e54aa7c4b6d1986fc2b0.1611607264.git.jpoimboe@redhat.com/
[2] https://lore.kernel.org/lkml/CAHk-=wgjwhDy-y4mQh34L+2aF=n6BjzHdqAW2=8wri5x7O04pA@mail.gmail.com/
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
(cherry picked from commit 6072b2c49d)
Bug: 209655537
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Change-Id: Ibbeeca6c7139f1d03621a8ba2137bafa32c14474
scripts/Kbuild.include is included everywhere, but macros such as
cc-option are needed by build targets only.
For example, when 'make clean' traverses the tree, it does not need
to evaluate $(call cc-option,).
Split cc-option, ld-option, etc. to scripts/Makefile.compiler, which
is only included from the top Makefile and scripts/Makefile.build.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Bug: 209655537
(cherry picked from commit 57fd251c78)
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Change-Id: I7cef781922a192a9bcd21152a74ff2cec0527ab0
VPATH is used in Kbuild to make pattern rules search for prerequisites
in both $(objtree) and $(srctree). Some of *.c, *.S files are not real
sources, but generated by tools such as flex, bison, perl.
In contrast, I doubt the benefit of --include-dir=$(abs_srctree) because
it is always clear which Makefiles are real sources, and which are not.
So, my hope is to add $(srctree)/ prefix to all check-in Makefiles,
then remove --include-dir=$(abs_srctree) flag in the future.
I am touching only some Kbuild core parts for now. Treewide fixes will
be needed to achieve this goal.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
(cherry picked from commit 3204a7fb98)
[nd: conflict in scripts/Makefile.modpost due to d7a956441f, which is
itself a backport of 850ded46c6]
Bug: 189327973
Bug: 209655537
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Change-Id: I691d266b68d769ec0fabcc98ed515cfb1cad5ccf
For simple text replacement, it is better to use a built-in function
instead of sed if possible. You can save one process forking.
I do not mean to replace all sed invocations because GNU Make itself
does not support regular expression (unless you use guile).
I just replaced simple ones.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
(cherry picked from commit 6e0839fda3)
Bug: 209655537
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Change-Id: I92c893dfb17055db0b8a8ca2f39ddfa5f31a118d
When building with LLVM_IAS=1, there is no point to specifying
'--prefix=' because that flag is only used to find GNU cross tools,
which will not be used indirectly when using the integrated assembler.
All of the tools are invoked directly from PATH or a full path specified
via the command line, which does not depend on the value of '--prefix='.
Sharing commands to reproduce issues becomes a little bit easier without
a '--prefix=' value because that '--prefix=' value is specific to a
user's machine due to it being an absolute path.
Some further notes from Fangrui Song:
clang can spawn GNU as (if -f?no-integrated-as is specified) and GNU
objcopy (-f?no-integrated-as and -gsplit-dwarf and -g[123]).
objcopy is only used for GNU as assembled object files.
With integrated assembler, the object file streamer creates .o and
.dwo simultaneously.
With GNU as, two objcopy commands are needed to extract .debug*.dwo to
.dwo files && another command to remove .debug*.dwo sections.
A small consequence of this change (to keep things simple) is that
'--prefix=' will always be specified now, even with a native build, when
it was not before. This should not be an issue due to the way that the
Makefile searches for the prefix (based on elfedit's location). This
ends up improving the experience for host builds because PATH is better
respected and matches GCC's behavior more closely. See the below thread
for more details:
https://lore.kernel.org/r/20210205213651.GA16907@Ryzen-5-4500U.localdomain/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
(cherry picked from commit eec08090bc)
Bug: 209655537
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Change-Id: I90f232a1551afb9118176a61ac5de38384a171fd
This flag was originally added to allow clang to find the GNU cross
tools in commit 785f11aa59 ("kbuild: Add better clang cross build
support"). This flag was not enough to find the tools at times so
'--prefix' was added to the list in commit ef8c4ed9db ("kbuild: allow
to use GCC toolchain not in Clang search path") and improved upon in
commit ca9b31f6bb ("Makefile: Fix GCC_TOOLCHAIN_DIR prefix for Clang
cross compilation"). Now that '--prefix' specifies a full path and
prefix, '--gcc-toolchain' serves no purpose because the kernel builds
with '-nostdinc' and '-nostdlib'.
This has been verified with self compiled LLVM 10.0.1 and LLVM 13.0.0 as
well as a distribution version of LLVM 11.1.0 without binutils in the
LLVM toolchain locations.
Link: https://reviews.llvm.org/D97902
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
(cherry picked from commit c91d4e47e1)
Bug: 209655537
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Change-Id: Ie1f64ed8562964ceba21e402a3d97850f6471508
There is no direct user of ld-version; you can use CONFIG_LD_VERSION
if needed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Bug: 209655537
(cherry picked from commit 05f6bbf2d7)
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Change-Id: If7f82474beea2822340ee8503de5087336766223
As Documentation/kbuild/llvm.rst notes, LLVM=1 switches the default of
tools, but you can still override CC, LD, etc. individually. This LLVM=1
check is unneeded because each tool is already checked separately.
"make CC=clang LD=ld.lld NM=llvm-nm AR=llvm-ar LLVM_IAS=1 menuconfig"
should be able to enable Clang LTO.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Bug: 209655537
(cherry picked from commit 4c273d23c4)
Change-Id: Ieb1f4bbf98521b929c42253260a9a5aec25e73e2
When using AMD's Optimizing C/C++ Compiler (AOCC), the build fails due
to a # character in the version string, which is interpreted as a
comment:
$ make CC=clang defconfig init/main.o
include/config/auto.conf.cmd:1374: *** invalid syntax in conditional. Stop.
$ sed -n 1374p include/config/auto.conf.cmd
ifneq "$(CC_VERSION_TEXT)" "AMD clang version 11.0.0 (CLANG: AOCC_2.3.0-Build#85 2020_11_10) (based on LLVM Mirror.Version.11.0.0)"
Remove all # characters in the version string so that the build does not
fail unexpectedly.
Link: https://github.com/ClangBuiltLinux/linux/issues/1298
Reported-by: Michael Fuckner <michael@fuckner.net>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
(cherry picked from commit c75173a269)
Bug: 209655537
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Change-Id: Ie2ba7041325f13865b59b43517111674519ce386
I noticed we're invoking $(CC) via $(shell) more than once to check the
version. Let's reuse the first string captured in $CC_VERSION_TEXT.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
[masahiro.yamada:
CC_VERSION_TEXT is assigned by = instead of :=, so this $(shell ) is
evaluated multiple times anyway. The number of $(CC) invocations will
be still the same. Replacing 'grep' with the built-in $(findstring )
will give real performance benefit.]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
(cherry picked from commit db07562aea)
Bug: 209655537
Change-Id: Ib8745c014472a9d63e51e98f9474cced778d57df
Reason for revert: Fails init on devices with no DICE DT nodes
Reverted Changes:
I035ad0998:ANDROID: GKI: update virtual device symbol list
I0b2ec380d:ANDROID: arm64: Enable CONFIG_OPEN_DICE=m
Signed-off-by: David Brazdil <dbrazdil@google.com>
Change-Id: Ieca199d3fa4ad5f574558f55d49a61be2f0a36ff
Arm Neoverse-N2 (#2067961) and Cortex-A710 (#2054223) suffers
from errata, where a TSB (trace synchronization barrier)
fails to flush the trace data completely, when executed from
a trace prohibited region. In Linux we always execute it
after we have moved the PE to trace prohibited region. So,
we can apply the workaround every time a TSB is executed.
The work around is to issue two TSB consecutively.
NOTE: This errata is defined as LOCAL_CPU_ERRATUM, implying
that a late CPU could be blocked from booting if it is the
first CPU that requires the workaround. This is because we
do not allow setting a cpu_hwcaps after the SMP boot. The
other alternative is to use "this_cpu_has_cap()" instead
of the faster system wide check, which may be a bit of an
overhead, given we may have to do this in nvhe KVM host
before a guest entry.
Bug: 213931796
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20211019163153.3692640-4-suzuki.poulose@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
(cherry picked from commit fa82d0b4b8)
[Fix conflict due to another workaround that is not backported
(TRBE_OVERWRITE). Also manually update cpucaps.h which is autogenerated
in upstream from arch/arm64/tools/cpucaps which we ignored as part of
the conflict resolution]
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Change-Id: I37403e5a51de2b7015ee6e3e94ee690e66010890
The Trace Filtering support (FEAT_TRF) ensures that the ETM
can be prohibited from generating any trace for a given EL.
This is much stricter knob, than the TRCVICTLR exception level
masks, which doesn't prevent the ETM from generating Context
packets for an "excluded" EL. At the moment, we do a onetime
enable trace at user and kernel and leave it untouched for the
kernel life time. This implies that the ETM could potentially
generate trace packets containing the kernel addresses, and
thus leaking the kernel virtual address in the trace.
This patch makes the switch dynamic, by honoring the filters
set by the user and enforcing them in the TRFCR controls.
We also rename the cpu_enable_tracing() appropriately to
cpu_detect_trace_filtering() and the drvdata member
trfc => trfcr to indicate the "value" of the TRFCR_EL1.
Bug: 213931796
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Al Grant <al.grant@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20210914102641.1852544-3-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
(cherry picked from commit 5f6fd1aa8c)
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Change-Id: I20432aa7cfd4375e1cdb9d256a2adc9df548d68e
The AUX bounce buffer is allocated with API dma_alloc_coherent(), in the
low level's architecture code, e.g. for Arm64, it maps the memory with
the attribution "Normal non-cacheable"; this can be concluded from the
definition for pgprot_dmacoherent() in arch/arm64/include/asm/pgtable.h.
Later when access the AUX bounce buffer, since the memory mapping is
non-cacheable, it's low efficiency due to every load instruction must
reach out DRAM.
This patch changes to allocate pages with dma_alloc_noncoherent(), the
driver can access the memory via cacheable mapping; therefore, load
instructions can fetch data from cache lines rather than always read
data from DRAM, the driver can boost memory performance. After using
the cacheable mapping, the driver uses dma_sync_single_for_cpu() to
invalidate cacheline prior to read bounce buffer so can avoid read stale
trace data.
By measurement the duration for function tmc_update_etr_buffer() with
ftrace function_graph tracer, it shows the performance significant
improvement for copying 4MiB data from bounce buffer:
# echo tmc_etr_get_data_flat_buf > set_graph_notrace // avoid noise
# echo tmc_update_etr_buffer > set_graph_function
# echo function_graph > current_tracer
before:
# CPU DURATION FUNCTION CALLS
# | | | | | | |
2) | tmc_update_etr_buffer() {
...
2) # 8148.320 us | }
after:
# CPU DURATION FUNCTION CALLS
# | | | | | | |
2) | tmc_update_etr_buffer() {
...
2) # 2525.420 us | }
Bug: 213931796
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210905032144.966766-1-leo.yan@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
(cherry picked from commit 0abd076217)
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Change-Id: I271f3882e1bdafb8053aecdb0948584a287b499f
Injecting an exception into a guest with non-VHE is risky business.
Instead of writing in the shadow register for the switch code to
restore it, we override the CPU register instead. Which gets
overriden a few instructions later by said restore code.
The result is that although the guest correctly gets the exception,
it will return to the original context in some random state,
depending on what was there the first place... Boo.
Fix the issue by writing to the shadow register. The original code
is absolutely fine on VHE, as the state is already loaded, and writing
to the shadow register in that case would actually be a bug.
Fixes: bb666c472c ("KVM: arm64: Inject AArch64 exceptions from HYP")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20220121184207.423426-1-maz@kernel.org
(cherry picked from commit 278583055a
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm.git fixes)
Bug: 209777660
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: Ifc1504c4be69e36a0a70033b36ee148c337ac7b5
Contrary to what df652bcf11 ("KVM: arm64: vgic-v3: Work around GICv3
locally generated SErrors") was asserting, there is at least one other
system out there (Cavium ThunderX2) implementing SEIS, and not in
an obviously broken way.
So instead of imposing the M1 workaround on an innocent bystander,
let's limit it to the two known broken Apple implementations.
Fixes: df652bcf11 ("KVM: arm64: vgic-v3: Work around GICv3 locally generated SErrors")
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220122103912.795026-1-maz@kernel.org
(cherry picked from commit d11a327ed9
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm.git fixes)
Bug: 209777660
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I4c1b8faab30744f81b012e03b31cdd8254614f87
CMOs issued from EL2 cannot directly use the kernel helpers,
as EL2 doesn't have a mapping of the guest pages. Oops.
Instead, use the mm_ops indirection to use helpers that will
perform a mapping at EL2 and allow the CMO to be effective.
Fixes: 25aa28691b ("KVM: arm64: Move guest CMOs to the fault handlers")
Reviewed-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220114125038.1336965-1-maz@kernel.org
(cherry picked from commit 094d00f8ca
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm.git fixes)
Bug: 209777660
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: Id020c5adb0ce0d02bc6cd344e7d01859539b9f4f
This reverts commit 9ad5e201c7.
The corresponding patch has been queued in the kvmarm tree as a fix for
5.17, so revert our FROMLIST version in preparation for pulling in the
upstream queue instead.
Bug: 209777660
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I7f65941b2b13125c6c6397590abbc3e18cb54496
The implementor will be used to condition the FIQ support quirk.
The specific CPU types are not used at the moment, but let's add them
for documentation purposes.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
(cherry picked from commit 11ecdad722)
Bug: 209777660
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: If84141e50dfb52258c9ecfca9979f2d77e9a5197
If a vcpu exits for a data abort with an invalid syndrome, the
expectations are that userspace has a chance to save the day if
it has requested to see such exits.
However, this is completely futile in the case of a protected VM,
as none of the state is available. In this particular case, inject
a data abort directly into the vcpu, consistent with what userspace
could do.
This also helps with pKVM, which discards all syndrome information when
forwarding data aborts that are not known to be MMIO.
Finally, hide the RETURN_NISV_IO_ABORT_TO_USER cap from userspace on
protected VMs, and document this tweak to the API.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Bug: 209580772
[willdeacon@: Drop KVM_CAP_SET_GUEST_DEBUG2 from context]
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I4090c7c266b27776089cac69efd489264ed003cf
Commit 3f6536412f ("ANDROID: KVM: arm64: refactor vcpu_read_sys_reg
and vcpu_write_sys_reg for hyp use") predicated direct access to the
live vCPU registers on an is_vhe_hyp_code() check, neglecting the fact
that these functions are also used by the VHE *kernel* code.
Restore the old behaviour by changing the check so that only the nVHE
hyp code unconditionally uses the 'ctxt_sys_reg' table.
Reported-by: Marc Zyngier <mzyngier@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Bug: 209580772
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I17d4c12ffdbbd95e8e8d1820ebb6438b138361aa
Typically, TLB invalidation of guest stage-2 mappings using nVHE is
performed by a hypercall originating from the host. For the invalidation
instruction to be effective, therefore, __tlb_switch_to_{guest,host}()
swizzle the active stage-2 context around the TLBI instruction.
With guest-to-host memory sharing and unsharing hypercalls originating
from the guest under pKVM, there is now a need to support both guest
and host VMID invalidations issued from guest context.
Replace the __tlb_switch_to_{guest,host}() functions with a more general
{enter,exit}_vmid_context() implementation which supports being invoked
from guest context and acts as a no-op if the target context matches the
running context.
Bug: 209580772
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I259b1acd11f25143080af2deaab820746090436d
We should only apply the mask ourselves if we're not
using POSIX acls
Bug: 215212818
Test: com.android.cts.externalstorageapp.CommonExternalStorageTest
#testAllPackageDirsWritable, verify files and cache permissions
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Change-Id: If105afe62a60b93cbce1ca5ab5caf11f008aa7db
The upstream change to make f2fs use iomap for direct I/O was backported
to this kernel branch, which broke the out-of-tree support for fscrypt
direct I/O because f2fs_iomap_begin() isn't aware of encryption. Make
the needed change to f2fs_iomap_begin(), matching what I've proposed
upstream at
https://lore.kernel.org/r/20220120071215.123274-5-ebiggers@kernel.org.
Also drop the fscrypt support from fs/direct-io.c, which is no longer
used since both ext4 and f2fs now use iomap for direct I/O.
Bug: 162255927
Bug: 215554521
Fixes: 6d54ce0108 ("Merge remote-tracking branch 'aosp/upstream-f2fs-stable-linux-5.10.y' into android13-5.10")
Change-Id: I6b99b623ad3b8a86099c260787b2086b415a0e12
Signed-off-by: Eric Biggers <ebiggers@google.com>
Changes in 5.10.93
kbuild: Add $(KBUILD_HOSTLDFLAGS) to 'has_libelf' test
devtmpfs regression fix: reconfigure on each mount
orangefs: Fix the size of a memory allocation in orangefs_bufmap_alloc()
remoteproc: qcom: pil_info: Don't memcpy_toio more than is provided
vfs: fs_context: fix up param length parsing in legacy_parse_param
perf: Protect perf_guest_cbs with RCU
KVM: x86: Register Processor Trace interrupt hook iff PT enabled in guest
KVM: s390: Clarify SIGP orders versus STOP/RESTART
9p: only copy valid iattrs in 9P2000.L setattr implementation
video: vga16fb: Only probe for EGA and VGA 16 color graphic cards
media: uvcvideo: fix division by zero at stream start
rtlwifi: rtl8192cu: Fix WARNING when calling local_irq_restore() with interrupts enabled
firmware: qemu_fw_cfg: fix sysfs information leak
firmware: qemu_fw_cfg: fix NULL-pointer deref on duplicate entries
firmware: qemu_fw_cfg: fix kobject leak in probe error path
KVM: x86: remove PMU FIXED_CTR3 from msrs_to_save_all
ALSA: hda/realtek: Add speaker fixup for some Yoga 15ITL5 devices
ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master after reboot from Windows
ALSA: hda: ALC287: Add Lenovo IdeaPad Slim 9i 14ITL5 speaker quirk
ALSA: hda/realtek: Add quirk for Legion Y9000X 2020
ALSA: hda/realtek: Re-order quirk entries for Lenovo
powerpc/pseries: Get entry and uaccess flush required bits from H_GET_CPU_CHARACTERISTICS
mtd: fixup CFI on ixp4xx
Linux 5.10.93
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I068bb827060f65df5c11bdffcd93090f2ab21148
commit 2aac550da3 upstream.
The recent few quirk entries for Lenovo haven't been put in the right
order. Let's arrange the table again.
Fixes: ad7cc2d41b ("ALSA: hda/realtek: Quirks to enable speaker output...")
Fixes: 6dc8697622 ("ALSA: hda/realtek: Add speaker fixup for some Yoga 15ITL5 devices")
Fixes: 8f4c90427a ("ALSA: hda/realtek: Add quirk for Legion Y9000X 2020")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c193300867 upstream.
This patch addresses an issue where after rebooting from Windows into Linux
there would be no audio output.
It turns out that the Realtek Audio driver on Windows changes some coeffs
which are not being reset/reinitialized when rebooting the machine. As a
result, there is no audio output until these coeffs are being reset to
their initial state. This patch takes care of that by setting known-good
(initial) values to the coeffs.
We initially relied upon alc1220_fixup_clevo_p950() to fix some pins in the
connection list. However, it also sets coef 0x7 which does not need to be
touched. Furthermore, to prevent mixing device-specific quirks I introduced
a new alc1220_fixup_gb_x570() which is heavily based on
alc1220_fixup_clevo_p950() but does not set coeff 0x7 and fixes the coeffs
that are actually needed instead.
This new alc1220_fixup_gb_x570() is believed to also work for other boards,
like the Gigabyte X570 Aorus Extreme and the newer Gigabyte Aorus X570S
Master. However, as there is no way for me to test these I initially only
enable this new behaviour for the mainboard I have which is the Gigabyte
X570(non-S) Aorus Master.
I tested this patch on the 5.15 branch as well as on master and it is
working well for me.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Fixes: 0d45e86d22 ("ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220103140517.30273-2-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9fb12fe5b9 upstream.
The fixed counter 3 is used for the Topdown metrics, which hasn't been
enabled for KVM guests. Userspace accessing to it will fail as it's not
included in get_fixed_pmc(). This breaks KVM selftests on ICX+ machines,
which have this counter.
To reproduce it on ICX+ machines, ./state_test reports:
==== Test Assertion Failure ====
lib/x86_64/processor.c:1078: r == nmsrs
pid=4564 tid=4564 - Argument list too long
1 0x000000000040b1b9: vcpu_save_state at processor.c:1077
2 0x0000000000402478: main at state_test.c:209 (discriminator 6)
3 0x00007fbe21ed5f92: ?? ??:0
4 0x000000000040264d: _start at ??:?
Unexpected result from KVM_GET_MSRS, r: 17 (failed MSR was 0x30c)
With this patch, it works well.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Message-Id: <20211217124934.32893-1-wei.w.wang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: e2ada66ec4 ("kvm: x86: Add Intel PMU MSRs to msrs_to_save[]")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47a1db8e79 upstream.
An initialised kobject must be freed using kobject_put() to avoid
leaking associated resources (e.g. the object name).
Commit fe3c606843 ("firmware: Fix a reference count leak.") "fixed"
the leak in the first error path of the file registration helper but
left the second one unchanged. This "fix" would however result in a NULL
pointer dereference due to the release function also removing the never
added entry from the fw_cfg_entry_cache list. This has now been
addressed.
Fix the remaining kobject leak by restoring the common error path and
adding the missing kobject_put().
Fixes: 75f3e8e47f ("firmware: introduce sysfs driver for QEMU's fw_cfg device")
Cc: stable@vger.kernel.org # 4.6
Cc: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211201132528.30025-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b144dedb9 upstream.
Syzbot reports the following WARNING:
[200~raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 1 PID: 1206 at kernel/locking/irqflag-debug.c:10
warn_bogus_irq_restore+0x1d/0x20 kernel/locking/irqflag-debug.c:10
Hardware initialization for the rtl8188cu can run for as long as 350 ms,
and the routine may be called with interrupts disabled. To avoid locking
the machine for this long, the current routine saves the interrupt flags
and enables local interrupts. The problem is that it restores the flags
at the end without disabling local interrupts first.
This patch fixes commit a53268be0c ("rtlwifi: rtl8192cu: Fix too long
disable of IRQs").
Reported-by: syzbot+cce1ee31614c171f5595@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Fixes: a53268be0c ("rtlwifi: rtl8192cu: Fix too long disable of IRQs")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211215171105.20623-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8aa637bf6d upstream.
Add the missing bulk-endpoint max-packet sanity check to
uvc_video_start_transfer() to avoid division by zero in
uvc_alloc_urb_buffers() in case a malicious device has broken
descriptors (or when doing descriptor fuzz testing).
Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4f ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).
Fixes: c0efd23292 ("V4L/DVB (8145a): USB Video Class driver")
Cc: stable@vger.kernel.org # 2.6.26
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
