[ Upstream commit 998127cdb4 ]
request sockets are lockless, __tcp_oow_rate_limited() could be called
on the same object from different cpus. This is harmless.
Add READ_ONCE()/WRITE_ONCE() annotations to avoid a KCSAN report.
Fixes: 4ce7e93cb3 ("tcp: rate limit ACK sent by SYN_RECV request sockets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ca3c005d0 ]
According to the synchronization rules for .ndo_get_stats() as seen in
Documentation/networking/netdevices.rst, acquiring a plain spin_lock()
should not be illegal, but the bridge driver implementation makes it so.
After running these commands, I am being faced with the following
lockdep splat:
$ ip link add link swp0 name macsec0 type macsec encrypt on && ip link set swp0 up
$ ip link add dev br0 type bridge vlan_filtering 1 && ip link set br0 up
$ ip link set macsec0 master br0 && ip link set macsec0 up
========================================================
WARNING: possible irq lock inversion dependency detected
6.4.0-04295-g31b577b4bd4a #603 Not tainted
--------------------------------------------------------
swapper/1/0 just changed the state of lock:
ffff6bd348724cd8 (&br->lock){+.-.}-{3:3}, at: br_forward_delay_timer_expired+0x34/0x198
but this lock took another, SOFTIRQ-unsafe lock in the past:
(&ocelot->stats_lock){+.+.}-{3:3}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Chain exists of:
&br->lock --> &br->hash_lock --> &ocelot->stats_lock
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ocelot->stats_lock);
local_irq_disable();
lock(&br->lock);
lock(&br->hash_lock);
<Interrupt>
lock(&br->lock);
*** DEADLOCK ***
(details about the 3 locks skipped)
swp0 is instantiated by drivers/net/dsa/ocelot/felix.c, and this
only matters to the extent that its .ndo_get_stats64() method calls
spin_lock(&ocelot->stats_lock).
Documentation/locking/lockdep-design.rst says:
| A lock is irq-safe means it was ever used in an irq context, while a lock
| is irq-unsafe means it was ever acquired with irq enabled.
(...)
| Furthermore, the following usage based lock dependencies are not allowed
| between any two lock-classes::
|
| <hardirq-safe> -> <hardirq-unsafe>
| <softirq-safe> -> <softirq-unsafe>
Lockdep marks br->hash_lock as softirq-safe, because it is sometimes
taken in softirq context (for example br_fdb_update() which runs in
NET_RX softirq), and when it's not in softirq context it blocks softirqs
by using spin_lock_bh().
Lockdep marks ocelot->stats_lock as softirq-unsafe, because it never
blocks softirqs from running, and it is never taken from softirq
context. So it can always be interrupted by softirqs.
There is a call path through which a function that holds br->hash_lock:
fdb_add_hw_addr() will call a function that acquires ocelot->stats_lock:
ocelot_port_get_stats64(). This can be seen below:
ocelot_port_get_stats64+0x3c/0x1e0
felix_get_stats64+0x20/0x38
dsa_slave_get_stats64+0x3c/0x60
dev_get_stats+0x74/0x2c8
rtnl_fill_stats+0x4c/0x150
rtnl_fill_ifinfo+0x5cc/0x7b8
rtmsg_ifinfo_build_skb+0xe4/0x150
rtmsg_ifinfo+0x5c/0xb0
__dev_notify_flags+0x58/0x200
__dev_set_promiscuity+0xa0/0x1f8
dev_set_promiscuity+0x30/0x70
macsec_dev_change_rx_flags+0x68/0x88
__dev_set_promiscuity+0x1a8/0x1f8
__dev_set_rx_mode+0x74/0xa8
dev_uc_add+0x74/0xa0
fdb_add_hw_addr+0x68/0xd8
fdb_add_local+0xc4/0x110
br_fdb_add_local+0x54/0x88
br_add_if+0x338/0x4a0
br_add_slave+0x20/0x38
do_setlink+0x3a4/0xcb8
rtnl_newlink+0x758/0x9d0
rtnetlink_rcv_msg+0x2f0/0x550
netlink_rcv_skb+0x128/0x148
rtnetlink_rcv+0x24/0x38
the plain English explanation for it is:
The macsec0 bridge port is created without p->flags & BR_PROMISC,
because it is what br_manage_promisc() decides for a VLAN filtering
bridge with a single auto port.
As part of the br_add_if() procedure, br_fdb_add_local() is called for
the MAC address of the device, and this results in a call to
dev_uc_add() for macsec0 while the softirq-safe br->hash_lock is taken.
Because macsec0 does not have IFF_UNICAST_FLT, dev_uc_add() ends up
calling __dev_set_promiscuity() for macsec0, which is propagated by its
implementation, macsec_dev_change_rx_flags(), to the lower device: swp0.
This triggers the call path:
dev_set_promiscuity(swp0)
-> rtmsg_ifinfo()
-> dev_get_stats()
-> ocelot_port_get_stats64()
with a calling context that lockdep doesn't like (br->hash_lock held).
Normally we don't see this, because even though many drivers that can be
bridge ports don't support IFF_UNICAST_FLT, we need a driver that
(a) doesn't support IFF_UNICAST_FLT, *and*
(b) it forwards the IFF_PROMISC flag to another driver, and
(c) *that* driver implements ndo_get_stats64() using a softirq-unsafe
spinlock.
Condition (b) is necessary because the first __dev_set_rx_mode() calls
__dev_set_promiscuity() with "bool notify=false", and thus, the
rtmsg_ifinfo() code path won't be entered.
The same criteria also hold true for DSA switches which don't report
IFF_UNICAST_FLT. When the DSA master uses a spin_lock() in its
ndo_get_stats64() method, the same lockdep splat can be seen.
I think the deadlock possibility is real, even though I didn't reproduce
it, and I'm thinking of the following situation to support that claim:
fdb_add_hw_addr() runs on a CPU A, in a context with softirqs locally
disabled and br->hash_lock held, and may end up attempting to acquire
ocelot->stats_lock.
In parallel, ocelot->stats_lock is currently held by a thread B (say,
ocelot_check_stats_work()), which is interrupted while holding it by a
softirq which attempts to lock br->hash_lock.
Thread B cannot make progress because br->hash_lock is held by A. Whereas
thread A cannot make progress because ocelot->stats_lock is held by B.
When taking the issue at face value, the bridge can avoid that problem
by simply making the ports promiscuous from a code path with a saner
calling context (br->hash_lock not held). A bridge port without
IFF_UNICAST_FLT is going to become promiscuous as soon as we call
dev_uc_add() on it (which we do unconditionally), so why not be
preemptive and make it promiscuous right from the beginning, so as to
not be taken by surprise.
With this, we've broken the links between code that holds br->hash_lock
or br->lock and code that calls into the ndo_change_rx_flags() or
ndo_get_stats64() ops of the bridge port.
Fixes: 2796d0c648 ("bridge: Automatically manage port promiscuous mode.")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0135c482fa ]
If truncate_node() fails in truncate_dnode(), it missed to call
f2fs_put_page(), fix it.
Fixes: 7735730d39 ("f2fs: fix to propagate error from __get_meta_page()")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b712f18c4 ]
Sec proxy/message manager data buffer is 60 bytes with the last of the
registers indicating transmission completion. This however poses a bit
of a challenge.
The backing memory for sec_proxy / message manager is regular memory,
and all sec proxy does is to trigger a burst of all 60 bytes of data
over to the target thread backing ring accelerator. It doesn't do a
memory scrub when it moves data out in the burst. When we transmit
multiple messages, remnants of previous message is also transmitted
which results in some random data being set in TISCI fields of
messages that have been expanded forward.
The entire concept of backward compatibility hinges on the fact that
the unused message fields remain 0x0 allowing for 0x0 value to be
specially considered when backward compatibility of message extension
is done.
So, instead of just writing the completion register, we continue
to fill the message buffer up with 0x0 (note: for partial message
involving completion, we already do this).
This allows us to scale and introduce ABI changes back also work with
other boot stages that may have left data in the internal memory.
While at this, be consistent and explicit with the data_reg pointer
increment.
Fixes: aace66b170 ("mailbox: Introduce TI message manager driver")
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c1f23ad34 ]
If neither a "hif_mspi" nor "mspi" resource is present, the driver will
just early exit in probe but still return success. Apart from not doing
anything meaningful, this would then also lead to a null pointer access
on removal, as platform_get_drvdata() would return NULL, which it would
then try to dereference when trying to unregister the spi master.
Fix this by unconditionally calling devm_ioremap_resource(), as it can
handle a NULL res and will then return a viable ERR_PTR() if we get one.
The "return 0;" was previously a "goto qspi_resource_err;" where then
ret was returned, but since ret was still initialized to 0 at this place
this was a valid conversion in 63c5395bb7 ("spi: bcm-qspi: Fix
use-after-free on unbind"). The issue was not introduced by this commit,
only made more obvious.
Fixes: fa236a7ef2 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Kamal Dasu <kamal.dasu@broadcom.com>
Link: https://lore.kernel.org/r/20230629134306.95823-1-jonas.gorski@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6feb37b3b0 ]
As &net->sctp.addr_wq_lock is also acquired by the timer
sctp_addr_wq_timeout_handler() in protocal.c, the same lock acquisition
at sctp_auto_asconf_init() seems should disable irq since it is called
from sctp_accept() under process context.
Possible deadlock scenario:
sctp_accept()
-> sctp_sock_migrate()
-> sctp_auto_asconf_init()
-> spin_lock(&net->sctp.addr_wq_lock)
<timer interrupt>
-> sctp_addr_wq_timeout_handler()
-> spin_lock_bh(&net->sctp.addr_wq_lock); (deadlock here)
This flaw was found using an experimental static analysis tool we are
developing for irq-related deadlock.
The tentative patch fix the potential deadlock by spin_lock_bh().
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Fixes: 34e5b01186 ("sctp: delay auto_asconf init until binding the first addr")
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230627120340.19432-1-dg573847474@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38ba835986 ]
If the PWM is exported but not enabled, do not call pwm_class_apply_state().
First of all, in this case, period may still be unconfigured and this would
make pwm_class_apply_state() return -EINVAL, and then suspend would fail.
Second, it makes little sense to apply state onto PWM that is not enabled
before suspend.
Failing case:
"
$ echo 1 > /sys/class/pwm/pwmchip4/export
$ echo mem > /sys/power/state
...
pwm pwmchip4: PM: dpm_run_callback(): pwm_class_suspend+0x1/0xa8 returns -22
pwm pwmchip4: PM: failed to suspend: error -22
PM: Some devices failed to suspend, or early wake event detected
"
Working case:
"
$ echo 1 > /sys/class/pwm/pwmchip4/export
$ echo 100 > /sys/class/pwm/pwmchip4/pwm1/period
$ echo 10 > /sys/class/pwm/pwmchip4/pwm1/duty_cycle
$ echo mem > /sys/power/state
...
"
Do not call pwm_class_apply_state() in case the PWM is disabled
to fix this issue.
Fixes: 7fd4edc57b ("pwm: sysfs: Add suspend/resume support")
Signed-off-by: Marek Vasut <marex@denx.de>
Fixes: ef2bf4997f ("pwm: Improve args checking in pwm_apply_state()")
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 661dfb7f46 ]
During suspend, all the tpm registers will lose values.
So the 'real_period' value of struct 'imx_tpm_pwm_chip'
should be forced to be zero to force the period update
code can be executed after system resume back.
Signed-off-by: Fancy Fang <chen.fang@nxp.com>
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 738a1cfec2 ("pwm: Add i.MX TPM PWM driver support")
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20a41a6261 ]
We should not rely on autosuspend timeout for system suspend. Instead,
let's use force_suspend and force_resume functions. Otherwise the serial
port controller device may not be idled on suspend.
As we are doing a register write on suspend to configure the serial port,
we still need to runtime PM resume the port on suspend.
While at it, let's switch to pm_runtime_resume_and_get() and check for
errors returned. And let's add the missing line break before return to the
suspend function while at it.
Fixes: 09d8b2bdbc ("serial: 8250: omap: Provide ability to enable/disable UART as wakeup source")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Message-ID: <20230614045922.4798-1-tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 285cff4c04 ]
The KVM_S390_GET_CMMA_BITS ioctl may return incorrect values when userspace
specifies a start_gfn outside of memslots.
This can occur when a VM has multiple memslots with a hole in between:
+-----+----------+--------+--------+
| ... | Slot N-1 | <hole> | Slot N |
+-----+----------+--------+--------+
^ ^ ^ ^
| | | |
GFN A A+B | |
A+B+C |
A+B+C+D
When userspace specifies a GFN in [A+B, A+B+C), it would expect to get the
CMMA values of the first dirty page in Slot N. However, userspace may get a
start_gfn of A+B+C+D with a count of 0, hence completely skipping over any
dirty pages in slot N.
The error is in kvm_s390_next_dirty_cmma(), which assumes
gfn_to_memslot_approx() will return the memslot _below_ the specified GFN
when the specified GFN lies outside a memslot. In reality it may return
either the memslot below or above the specified GFN.
When a memslot above the specified GFN is returned this happens:
- ofs is calculated, but since the memslot's base_gfn is larger than the
specified cur_gfn, ofs will underflow to a huge number.
- ofs is passed to find_next_bit(). Since ofs will exceed the memslot's
number of pages, the number of pages in the memslot is returned,
completely skipping over all bits in the memslot userspace would be
interested in.
Fix this by resetting ofs to zero when a memslot _above_ cur_gfn is
returned (cur_gfn < ms->base_gfn).
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: afdad61615 ("KVM: s390: Fix storage attributes migration with memory slots")
Message-Id: <20230324145424.293889-2-nrb@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e6bd945e6 ]
The declaration is in an #ifdef, which causes warnings when building
with 'make W=1' and without CONFIG_PM:
drivers/usb/core/devio.c:742:6: error: no previous prototype for 'usbfs_notify_suspend'
drivers/usb/core/devio.c:747:6: error: no previous prototype for 'usbfs_notify_resume'
Use the same #ifdef check around the function definitions to avoid
the warnings and slightly shrink the USB core.
Fixes: 7794f486ed ("usbfs: Add ioctls for runtime power management")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230516202103.558301-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73346b9965 ]
Kernel documentation has to be synchronized with a code, otherwise
the validator is not happy:
Function parameter or member 'usb_bits' not described in 'extcon_cable'
Function parameter or member 'chg_bits' not described in 'extcon_cable'
Function parameter or member 'jack_bits' not described in 'extcon_cable'
Function parameter or member 'disp_bits' not described in 'extcon_cable'
Describe the fields added in the past.
Fixes: ceaa98f442 ("extcon: Add the support for the capability of each property")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e77e0b7a9 ]
Kernel documentation has to be synchronized with a code, otherwise
the validator is not happy:
Function parameter or member 'usb_propval' not described in 'extcon_cable'
Function parameter or member 'chg_propval' not described in 'extcon_cable'
Function parameter or member 'jack_propval' not described in 'extcon_cable'
Function parameter or member 'disp_propval' not described in 'extcon_cable'
Describe the fields added in the past.
Fixes: 067c1652e7 ("extcon: Add the support for extcon property according to extcon type")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f489a966f ]
The previous commit ebad8e731c ("media: usb: siano: Fix use after
free bugs caused by do_submit_urb") adds cancel_work_sync() in
smsusb_stop_streaming(). But smsusb_stop_streaming() may be called,
even if the work_struct surb->wq has not been initialized. As a result,
the warning will occur. One of the processes that could lead to warning
is shown below:
smsusb_probe()
smsusb_init_device()
if (!dev->in_ep || !dev->out_ep || align < 0) {
smsusb_term_device(intf);
smsusb_stop_streaming()
cancel_work_sync(&dev->surbs[i].wq);
__cancel_work_timer()
__flush_work()
if (WARN_ON(!work->func)) // work->func is null
The log reported by syzbot is shown below:
WARNING: CPU: 0 PID: 897 at kernel/workqueue.c:3066 __flush_work+0x798/0xa80 kernel/workqueue.c:3063
Modules linked in:
CPU: 0 PID: 897 Comm: kworker/0:2 Not tainted 6.2.0-rc1-syzkaller #0
RIP: 0010:__flush_work+0x798/0xa80 kernel/workqueue.c:3066
...
RSP: 0018:ffffc9000464ebf8 EFLAGS: 00010246
RAX: 1ffff11002dbb420 RBX: 0000000000000021 RCX: 1ffffffff204fa4e
RDX: dffffc0000000000 RSI: 0000000000000001 RDI: ffff888016dda0e8
RBP: ffffc9000464ed98 R08: 0000000000000001 R09: ffffffff90253b2f
R10: 0000000000000001 R11: 0000000000000000 R12: ffff888016dda0e8
R13: ffff888016dda0e8 R14: ffff888016dda100 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffd4331efe8 CR3: 000000000b48e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__cancel_work_timer+0x315/0x460 kernel/workqueue.c:3160
smsusb_stop_streaming drivers/media/usb/siano/smsusb.c:182 [inline]
smsusb_term_device+0xda/0x2d0 drivers/media/usb/siano/smsusb.c:344
smsusb_init_device+0x400/0x9ce drivers/media/usb/siano/smsusb.c:419
smsusb_probe+0xbbd/0xc55 drivers/media/usb/siano/smsusb.c:567
...
This patch adds check before cancel_work_sync(). If surb->wq has not
been initialized, the cancel_work_sync() will not be executed.
Reported-by: syzbot+27b0b464864741b18b99@syzkaller.appspotmail.com
Fixes: ebad8e731c ("media: usb: siano: Fix use after free bugs caused by do_submit_urb")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26ae58f65e ]
VIDIOC_ENUMINPUT documentation describes the tuner field of
struct v4l2_input as index:
Documentation/userspace-api/media/v4l/vidioc-enuminput.rst
"
* - __u32
- ``tuner``
- Capture devices can have zero or more tuners (RF demodulators).
When the ``type`` is set to ``V4L2_INPUT_TYPE_TUNER`` this is an
RF connector and this field identifies the tuner. It corresponds
to struct :c:type:`v4l2_tuner` field ``index``. For
details on tuners see :ref:`tuner`.
"
Drivers I could find also use the 'tuner' field as an index, e.g.:
drivers/media/pci/bt8xx/bttv-driver.c bttv_enum_input()
drivers/media/usb/go7007/go7007-v4l2.c vidioc_enum_input()
However, the UAPI comment claims this field is 'enum v4l2_tuner_type':
include/uapi/linux/videodev2.h
This field being 'enum v4l2_tuner_type' is unlikely as it seems to be
never used that way in drivers, and documentation confirms it. It seem
this comment got in accidentally in the commit which this patch fixes.
Fix the UAPI comment to stop confusion.
This was pointed out by Dmitry while reviewing VIDIOC_ENUMINPUT
support for strace.
Fixes: 6016af82ea ("[media] v4l2: use __u32 rather than enums in ioctl() structs")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdaca63186 ]
If az6007_read() returns error, there is no sence to continue.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 3af2f4f15a ("[media] az6007: Change the az6007 read/write routine parameter")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83f3fcf96f ]
The __w1_remove_master_device() function calls:
list_del(&dev->w1_master_entry);
So presumably this can cause an endless loop.
Fixes: 7785925dd8 ("[PATCH] w1: cleanups.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 95a55437dc upstream.
The Amiga partition parser module uses signed int for partition sector
address and count, which will overflow for disks larger than 1 TB.
Use u64 as type for sector address and size to allow using disks up to
2 TB without LBD support, and disks larger than 2 TB with LBD. The RBD
format allows to specify disk sizes up to 2^128 bytes (though native
OS limitations reduce this somewhat, to max 2^68 bytes), so check for
u64 overflow carefully to protect against overflowing sector_t.
This bug was reported originally in 2012, and the fix was created by
the RDB author, Joanne Dow <jdow@earthlink.net>. A patch had been
discussed and reviewed on linux-m68k at that time but never officially
submitted (now resubmitted as patch 1 of this series).
Patch 3 (this series) adds additional error checking and warning
messages. One of the error checks now makes use of the previously
unused rdb_CylBlocks field, which causes a 'sparse' warning
(cast to restricted __be32).
Annotate all 32 bit fields in affs_hardblocks.h as __be32, as the
on-disk format of RDB and partition blocks is always big endian.
Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=43511
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Message-ID: <201206192146.09327.Martin@lichtvoll.de>
Cc: <stable@vger.kernel.org> # 5.2
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230620201725.7020-3-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0aabed9ca upstream.
In scenarios where pullup relies on resume (get sync) to initialize
the controller and set the run stop bit, then core_init is followed by
gadget_resume which will eventually set run stop bit.
But in cases where the core_init fails, the return value is not sent
back to udc appropriately. So according to UDC the controller has
started but in reality we never set the run stop bit.
On systems like Android, there are uevents sent to HAL depending on
whether the configfs_bind / configfs_disconnect were invoked. In the
above mentioned scnenario, if the core init fails, the run stop won't
be set and the cable plug-out won't result in generation of any
disconnect event and userspace would never get any uevent regarding
cable plug out and we never call pullup(0) again. Furthermore none of
the next Plug-In/Plug-Out's would be known to configfs.
Return back the appropriate result to UDC to let the userspace/
configfs know that the pullup failed so they can take appropriate
action.
Fixes: 77adb8bdf4 ("usb: dwc3: gadget: Allow runtime suspend if UDC unbinded")
Cc: stable <stable@kernel.org>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Message-ID: <20230618120949.14868-1-quic_kriskura@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ffa5f7a3bf upstream.
The new LARA-R6 product variant identified by the "01B" string can be
configured (by AT interface) in three different USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial
interface and 1 CDC-ECM virtual network interface
The first 4 interfaces of all the 3 USB configurations (default, RmNet,
CDC-ECM) are the same.
In default mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
In RmNet mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
If 4: RMNET interface
In CDC-ECM mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
If 4: CDC-ECM interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Link: https://lore.kernel.org/r/20230622092921.12651-1-davide.tronchin.94@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 501e197a02 ]
The st-rng driver uses devres to register itself with the hwrng core,
the driver will be unregistered from hwrng when its device goes out of
scope. This happens after the driver's remove function is called.
However, st-rng's clock is disabled in the remove function. There's a
short timeframe where st-rng is still registered with the hwrng core
although its clock is disabled. I suppose the clock must be active to
access the hardware and serve requests from the hwrng core.
Switch to devm_clk_get_enabled and let devres disable the clock and
unregister the hwrng. This avoids the race condition.
Fixes: 3e75241be8 ("hwrng: drivers - Use device-managed registration API")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad23756271 ]
This patch fixes an unused variable warning when this driver is
built-in with CONFIG_OF=n.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: 501e197a02 ("hwrng: st - keep clock enabled while hwrng is registered")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c907e72f58 ]
When the client received NFS4ERR_BADSESSION, it schedules recovery
and start the state manager thread which in turn freezes the
session table and does not allow for any new requests to use the
no-longer valid session. However, it is possible that before
the state manager thread runs, a new operation would use the
released slot that received BADSESSION and was therefore not
updated its sequence number. Such re-use of the slot can lead
the application errors.
Fixes: 5c441544f0 ("NFSv4.x: Handle bad/dead sessions correctly in nfs41_sequence_process()")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92e2921eea ]
ASM_NL is useful not only in *.S files but also in .c files for using
inline assembler in C code.
On ARC, however, ASM_NL is evaluated inconsistently. It is expanded to
a backquote (`) in *.S files, but a semicolon (;) in *.c files because
arch/arc/include/asm/linkage.h defines it inside #ifdef __ASSEMBLY__,
so the definition for C code falls back to the default value defined in
include/linux/linkage.h.
If ASM_NL is used in inline assembler in .c files, it will result in
wrong assembly code because a semicolon is not an instruction separator,
but the start of a comment for ARC.
Move ASM_NL (also __ALIGN and __ALIGN_STR) out of the #ifdef.
Fixes: 9df62f0544 ("arch: use ASM_NL instead of ';' for assembler new line character in the macro")
Fixes: 8d92e992a7 ("ARC: define __ALIGN_STR and __ALIGN symbols for ARC")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a3f1e573a ]
The > comparison should be >= to prevent an out of bounds array
access.
Fixes: 52dc0595d5 ("modpost: handle relocations mismatch in __ex_table.")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efbc7764c4 ]
Commit df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3") uncovered
a type mismatch in cesa 3des support that leads to a memcpy beyond the
end of a structure:
In function 'fortify_memcpy_chk',
inlined from 'mv_cesa_des3_ede_setkey' at drivers/crypto/marvell/cesa/cipher.c:307:2:
include/linux/fortify-string.h:583:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
583 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is probably harmless as the actual data that is copied has the correct
type, but clearly worth fixing nonetheless.
Fixes: 4ada483978 ("crypto: marvell/cesa - add Triple-DES support")
Cc: Kees Cook <keescook@chromium.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56a24b8ce6 ]
addend_arm_rel() processes R_ARM_PC24, R_ARM_CALL, R_ARM_JUMP24 in a
wrong way.
Here, test code.
[test code for R_ARM_JUMP24]
.section .init.text,"ax"
bar:
bx lr
.section .text,"ax"
.globl foo
foo:
b bar
[test code for R_ARM_CALL]
.section .init.text,"ax"
bar:
bx lr
.section .text,"ax"
.globl foo
foo:
push {lr}
bl bar
pop {pc}
If you compile it with ARM multi_v7_defconfig, modpost will show the
symbol name, (unknown).
WARNING: modpost: vmlinux.o: section mismatch in reference: foo (section: .text) -> (unknown) (section: .init.text)
(You need to use GNU linker instead of LLD to reproduce it.)
Fix the code to make modpost show the correct symbol name.
I imported (with adjustment) sign_extend32() from include/linux/bitops.h.
The '+8' is the compensation for pc-relative instruction. It is
documented in "ELF for the Arm Architecture" [1].
"If the relocation is pc-relative then compensation for the PC bias
(the PC value is 8 bytes ahead of the executing instruction in Arm
state and 4 bytes in Thumb state) must be encoded in the relocation
by the object producer."
[1]: https://github.com/ARM-software/abi-aa/blob/main/aaelf32/aaelf32.rst
Fixes: 56a974fa2d ("kbuild: make better section mismatch reports on arm")
Fixes: 6e2e340b59 ("ARM: 7324/1: modpost: Fix section warnings for ARM for many compilers")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7c63520f6 ]
addend_arm_rel() processes R_ARM_ABS32 in a wrong way.
Here, test code.
[test code 1]
#include <linux/init.h>
int __initdata foo;
int get_foo(void) { return foo; }
If you compile it with ARM versatile_defconfig, modpost will show the
symbol name, (unknown).
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> (unknown) (section: .init.data)
(You need to use GNU linker instead of LLD to reproduce it.)
If you compile it for other architectures, modpost will show the correct
symbol name.
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data)
For R_ARM_ABS32, addend_arm_rel() sets r->r_addend to a wrong value.
I just mimicked the code in arch/arm/kernel/module.c.
However, there is more difficulty for ARM.
Here, test code.
[test code 2]
#include <linux/init.h>
int __initdata foo;
int get_foo(void) { return foo; }
int __initdata bar;
int get_bar(void) { return bar; }
With this commit applied, modpost will show the following messages
for ARM versatile_defconfig:
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data)
WARNING: modpost: vmlinux.o: section mismatch in reference: get_bar (section: .text) -> foo (section: .init.data)
The reference from 'get_bar' to 'foo' seems wrong.
I have no solution for this because it is true in assembly level.
In the following output, relocation at 0x1c is no longer associated
with 'bar'. The two relocation entries point to the same symbol, and
the offset to 'bar' is encoded in the instruction 'r0, [r3, #4]'.
Disassembly of section .text:
00000000 <get_foo>:
0: e59f3004 ldr r3, [pc, #4] @ c <get_foo+0xc>
4: e5930000 ldr r0, [r3]
8: e12fff1e bx lr
c: 00000000 .word 0x00000000
00000010 <get_bar>:
10: e59f3004 ldr r3, [pc, #4] @ 1c <get_bar+0xc>
14: e5930004 ldr r0, [r3, #4]
18: e12fff1e bx lr
1c: 00000000 .word 0x00000000
Relocation section '.rel.text' at offset 0x244 contains 2 entries:
Offset Info Type Sym.Value Sym. Name
0000000c 00000c02 R_ARM_ABS32 00000000 .init.data
0000001c 00000c02 R_ARM_ABS32 00000000 .init.data
When find_elf_symbol() gets into a situation where relsym->st_name is
zero, there is no guarantee to get the symbol name as written in C.
I am keeping the current logic because it is useful in many architectures,
but the symbol name is not always correct depending on the optimization.
I left some comments in find_tosym().
Fixes: 56a974fa2d ("kbuild: make better section mismatch reports on arm")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b04b076fb5 ]
Fix build warnings when DEBUG_FS is not enabled by using an empty
do-while loop instead of a value:
In file included from ../drivers/crypto/nx/nx.c:27:
../drivers/crypto/nx/nx.c: In function 'nx_register_algs':
../drivers/crypto/nx/nx.h:173:33: warning: statement with no effect [-Wunused-value]
173 | #define NX_DEBUGFS_INIT(drv) (0)
../drivers/crypto/nx/nx.c:573:9: note: in expansion of macro 'NX_DEBUGFS_INIT'
573 | NX_DEBUGFS_INIT(&nx_driver);
../drivers/crypto/nx/nx.c: In function 'nx_remove':
../drivers/crypto/nx/nx.h:174:33: warning: statement with no effect [-Wunused-value]
174 | #define NX_DEBUGFS_FINI(drv) (0)
../drivers/crypto/nx/nx.c:793:17: note: in expansion of macro 'NX_DEBUGFS_FINI'
793 | NX_DEBUGFS_FINI(&nx_driver);
Also, there is no need to build nx_debugfs.o when DEBUG_FS is not
enabled, so change the Makefile to accommodate that.
Fixes: ae0222b728 ("powerpc/crypto: nx driver code supporting nx encryption")
Fixes: aef7b31c88 ("powerpc/crypto: Build files for the nx device driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Breno Leitão <leitao@debian.org>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Paulo Flabiano Smorigo <pfsmorigo@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac52578d6e ]
The virtio rng device kicks off a new entropy request whenever the
data available reaches zero. When a new request occurs at the end
of a read operation, that is, when the result of that request is
only needed by the next reader, then there is a race between the
writing of the new data and the next reader.
This is because there is no synchronisation whatsoever between the
writer and the reader.
Fix this by writing data_avail with smp_store_release and reading
it with smp_load_acquire when we first enter read. The subsequent
reads are safe because they're either protected by the first load
acquire, or by the completion mechanism.
Also remove the redundant zeroing of data_idx in random_recv_done
(data_idx must already be zero at this point) and data_avail in
request_entropy (ditto).
Reported-by: syzbot+726dc8c62c3536431ceb@syzkaller.appspotmail.com
Fixes: f7f510ec19 ("virtio: An entropy device, as suggested by hpa.")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bb31abdbe ]
When virtio-rng device was dropped by the hwrng core we were forced
to wait the buffer to come back from the device to not have
remaining ongoing operation that could spoil the buffer.
But now, as the buffer is internal to the virtio-rng we can release
the waiting loop immediately, the buffer will be retrieve and use
when the virtio-rng driver will be selected again.
This avoids to hang on an rng_current write command if the virtio-rng
device is blocked by a lack of entropy. This allows to select
another entropy source if the current one is empty.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20211028101111.128049-3-lvivier@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stable-dep-of: ac52578d6e ("hwrng: virtio - Fix race on data_avail and actual data")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf3175bc50 ]
hwrng core uses two buffers that can be mixed in the
virtio-rng queue.
If the buffer is provided with wait=0 it is enqueued in the
virtio-rng queue but unused by the caller.
On the next call, core provides another buffer but the
first one is filled instead and the new one queued.
And the caller reads the data from the new one that is not
updated, and the data in the first one are lost.
To avoid this mix, virtio-rng needs to use its own unique
internal buffer at a cost of a data copy to the caller buffer.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20211028101111.128049-2-lvivier@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stable-dep-of: ac52578d6e ("hwrng: virtio - Fix race on data_avail and actual data")
Signed-off-by: Sasha Levin <sashal@kernel.org>
