[ Upstream commit 90989869baae47ee2aa3bcb6f6eb9fbbe4287958 ]
Make xenbus_init() allow a non-local xenstore for a PVH dom0 - it is
currently forced to XS_LOCAL. With Hyperlaunch booting dom0 and a
xenstore stubdom, dom0 can be handled as a regular XS_HVM following the
late init path.
Ideally we'd drop the use of xen_initial_domain() and just check for the
event channel instead. However, ARM has a xen,enhanced no-xenstore
mode, where the event channel and PFN would both be 0. Retain the
xen_initial_domain() check, and use that for an additional check when
the event channel is 0.
Check the full 64bit HVM_PARAM_STORE_EVTCHN value to catch the off
chance that high bits are set for the 32bit event channel.
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Change-Id: I5506da42e4c6b8e85079fefb2f193c8de17c7437
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250506204456.5220-1-jason.andryuk@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4720f9707c783f642332dee3d56dccaefa850e42 ]
Strings from the kernel are guaranteed to be null terminated and
ynl_attr_validate() checks for this. But it doesn't check if the string
has a len of 0, which would cause problems when trying to access
data[len - 1]. Fix this by checking that len is positive.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250503043050.861238-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f95d186255b319c48a365d47b69bd997fecb674e ]
[BUG]
When trying read-only scrub on a btrfs with rescue=idatacsums mount
option, it will crash with the following call trace:
BUG: kernel NULL pointer dereference, address: 0000000000000208
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
CPU: 1 UID: 0 PID: 835 Comm: btrfs Tainted: G O 6.15.0-rc3-custom+ #236 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:btrfs_lookup_csums_bitmap+0x49/0x480 [btrfs]
Call Trace:
<TASK>
scrub_find_fill_first_stripe+0x35b/0x3d0 [btrfs]
scrub_simple_mirror+0x175/0x290 [btrfs]
scrub_stripe+0x5f7/0x6f0 [btrfs]
scrub_chunk+0x9a/0x150 [btrfs]
scrub_enumerate_chunks+0x333/0x660 [btrfs]
btrfs_scrub_dev+0x23e/0x600 [btrfs]
btrfs_ioctl+0x1dcf/0x2f80 [btrfs]
__x64_sys_ioctl+0x97/0xc0
do_syscall_64+0x4f/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[CAUSE]
Mount option "rescue=idatacsums" will completely skip loading the csum
tree, so that any data read will not find any data csum thus we will
ignore data checksum verification.
Normally call sites utilizing csum tree will check the fs state flag
NO_DATA_CSUMS bit, but unfortunately scrub does not check that bit at all.
This results in scrub to call btrfs_search_slot() on a NULL pointer
and triggered above crash.
[FIX]
Check both extent and csum tree root before doing any tree search.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f122121796f91168d0894c2710b8dd71330a34f8 ]
Function CIFSSMBSetPathInfo() is not supported by non-NT servers and
returns error. Fallback code via open filehandle and CIFSSMBSetFileInfo()
does not work neither because CIFS_open() works also only on NT server.
Therefore currently the whole smb_set_file_info() function as a SMB1
callback for the ->set_file_info() does not work with older non-NT SMB
servers, like Win9x and others.
This change implements fallback code in smb_set_file_info() which will
works with any server and allows to change time values and also to set or
clear read-only attributes.
To make existing fallback code via CIFSSMBSetFileInfo() working with also
non-NT servers, it is needed to change open function from CIFS_open()
(which is NT specific) to cifs_open_file() which works with any server
(this is just a open wrapper function which choose the correct open
function supported by the server).
CIFSSMBSetFileInfo() is working also on non-NT servers, but zero time
values are not treated specially. So first it is needed to fill all time
values if some of them are missing, via cifs_query_path_info() call.
There is another issue, opening file in write-mode (needed for changing
attributes) is not possible when the file has read-only attribute set.
The only option how to clear read-only attribute is via SMB_COM_SETATTR
command. And opening directory is not possible neither and here the
SMB_COM_SETATTR command is the only option how to change attributes.
And CIFSSMBSetFileInfo() does not honor setting read-only attribute, so
for setting is also needed to use SMB_COM_SETATTR command.
Existing code in cifs_query_path_info() is already using SMB_COM_GETATTR as
a fallback code path (function SMBQueryInformation()), so introduce a new
function SMBSetInformation which will implement SMB_COM_SETATTR command.
My testing showed that Windows XP SMB1 client is also using SMB_COM_SETATTR
command for setting or clearing read-only attribute against non-NT server.
So this can prove that this is the correct way how to do it.
With this change it is possible set all 4 time values and all attributes,
including clearing and setting read-only bit on non-NT SMB servers.
Tested against Win98 SMB1 server.
This change fixes "touch" command which was failing when called on existing
file. And fixes also "chmod +w" and "chmod -w" commands which were also
failing (as they are changing read-only attribute).
Note that this change depends on following change
"cifs: Improve cifs_query_path_info() and cifs_query_file_info()"
as it require to query all 4 time attribute values.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1041c117a2c33cdffc4f695ac4b469e9124d24d5 ]
When CAP_NT_SMBS was not negotiated then do not issue CIFSSMBQPathInfo()
and CIFSSMBQFileInfo() commands. CIFSSMBQPathInfo() is not supported by
non-NT Win9x SMB server and CIFSSMBQFileInfo() returns from Win9x SMB
server bogus data in Attributes field (for example lot of files are marked
as reparse points, even Win9x does not support them and read-only bit is
not marked for read-only files). Correct information is returned by
CIFSFindFirst() or SMBQueryInformation() command.
So as a fallback in cifs_query_path_info() function use CIFSFindFirst()
with SMB_FIND_FILE_FULL_DIRECTORY_INFO level which is supported by both NT
and non-NT servers and as a last option use SMBQueryInformation() as it was
before.
And in function cifs_query_file_info() immediately returns -EOPNOTSUPP when
not communicating with NT server. Client then revalidate inode entry by the
cifs_query_path_info() call, which is working fine. So fstat() syscall on
already opened file will receive correct information.
Note that both fallback functions in non-UNICODE mode expands wildcards.
Therefore those fallback functions cannot be used on paths which contain
SMB wildcard characters (* ? " > <).
CIFSFindFirst() returns all 4 time attributes as opposite of
SMBQueryInformation() which returns only one.
With this change it is possible to query all 4 times attributes from Win9x
server and at the same time, client minimize sending of unsupported
commands to server.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f024d3a8ded0d8d2129ae123d7a5305c29ca44ce ]
syzbot complains about the cached sq head read, and it's totally right.
But we don't need to care, it's just reading fdinfo, and reading the
CQ or SQ tail/head entries are known racy in that they are just a view
into that very instant and may of course be outdated by the time they
are reported.
Annotate both the SQ head and CQ tail read with data_race() to avoid
this syzbot complaint.
Link: https://lore.kernel.org/io-uring/6811f6dc.050a0220.39e3a1.0d0e.GAE@google.com/
Reported-by: syzbot+3e77fd302e99f5af9394@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e56088a13708757da68ad035269d69b93ac8c389 ]
The public datasheets of the following Amlogic SoCs describe a typical
resistor value for the built-in pull up/down resistor:
- Meson8/8b/8m2: not documented
- GXBB (S905): 60 kOhm
- GXL (S905X): 60 kOhm
- GXM (S912): 60 kOhm
- G12B (S922X): 60 kOhm
- SM1 (S905D3): 60 kOhm
The public G12B and SM1 datasheets additionally state min and max
values:
- min value: 50 kOhm for both, pull-up and pull-down
- max value for the pull-up: 70 kOhm
- max value for the pull-down: 130 kOhm
Use 60 kOhm in the pinctrl-meson driver as well so it's shown in the
debugfs output. It may not be accurate for Meson8/8b/8m2 but in reality
60 kOhm is closer to the actual value than 1 Ohm.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/20250329190132.855196-1-martin.blumenstingl@googlemail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 749b5b279e5636cdcef51e15d67b77162cca6caa ]
We have a few reports of sc7180-trogdor-pompom devices that have a
panel in them that IDs as STA 0x0004 and has the following raw EDID:
00 ff ff ff ff ff ff 00 4e 81 04 00 00 00 00 00
10 20 01 04 a5 1a 0e 78 0a dc dd 96 5b 5b 91 28
1f 52 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 8e 1c 56 a0 50 00 1e 30 28 20
55 00 00 90 10 00 00 18 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe
00 31 31 36 4b 48 44 30 32 34 30 30 36 0a 00 e6
We've been unable to locate a datasheet for this panel and our partner
has not been responsive, but all Starry eDP datasheets that we can
find agree on the same timing (delay_100_500_e200) so it should be
safe to use that here instead of the super conservative timings. We'll
still go a little extra conservative and allow `hpd_absent` of 200
instead of 100 because that won't add any real-world delay in most
cases.
We'll associate the string from the EDID ("116KHD024006") with this
panel. Given that the ID is the suspicious value of 0x0004 it seems
likely that Starry doesn't always update their IDs but the string will
still work to differentiate if we ever need to in the future.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250109142853.1.Ibcc3009933fd19507cc9c713ad0c99c7a9e4fe17@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6788a666000d600bd8f2e9f991cad9cc805e7f01 ]
End offset for the monitor destination ring descriptor is defined as
16 bits, while the firmware definition specifies only 12 bits.
The remaining bits (bit 12 to bit 15) are reserved and may contain
junk values, leading to invalid information retrieval. Fix this issue
by updating the correct genmask values.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Link: https://patch.msgid.link/20241223060132.3506372-8-quic_ppranees@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfffb317519f88534bb82797f055f0a2fd867e7b ]
When using nvmem, ath9k could potentially be loaded before nvmem, which
loads after mtd. This is an issue if DT contains an nvmem mac address.
If nvmem is not ready in time for ath9k, -EPROBE_DEFER is returned. Pass
it to _probe so that ath9k can properly grab a potentially present MAC
address.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20241105222326.194417-1-rosenp@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df11edfba49e5fb69f4c9e7cb76082b89c417f78 ]
Since inception there is an obvious typo laying around in
ath12k_hal_tx_cmd_ext_desc_setup(). Instead of initializing + adding
flags to tcl_ext_cmd->info1, we initialize + override. This will be needed
in the future to make broadcast frames work with ethernet encapsulation.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250127071306.1454699-1-nico.escande@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00451eb3bec763f708e7e58326468c1e575e5a66 ]
Some users want to plug two identical USB devices at the same time.
This static variable could theoretically cause them to use incorrect
TX power values.
Move the variable to the caller and pass a pointer to it to
rtw8822b_set_tx_power_index_by_rate().
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/8a60f581-0ab5-4d98-a97d-dd83b605008f@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d3e28feca7ac8c6cf2a390dbbe1f97e3feb7f36 ]
Occasionally there is an EPROTO error during firmware download.
This error is converted to EAGAIN in the download function.
But nobody tries again and so device probe fails.
Implement download retry to fix this.
This error was observed (and fix tested) on a tbs2910 board [1]
with an embedded RTL8188EU (0bda:8179) device behind a USB hub.
[1] arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts
Signed-off-by: Soeren Moch <smoch@web.de>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250127194828.599379-1-smoch@web.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 598bdf4fefff5af4ce6d26d16f7b2a20808fc4cb ]
Instead of using standard perf_event_attr->freq=0 and ->sample_period
fields, IBS event in 'sample period mode' can also be opened by setting
period value directly in perf_event_attr->config in a MaxCnt bit-field
format.
IBS OP MaxCnt bits are defined as:
(high bits) IbsOpCtl[26:20] = IbsOpMaxCnt[26:20]
(low bits) IbsOpCtl[15:0] = IbsOpMaxCnt[19:4]
Perf event sample period can be derived from MaxCnt bits as:
sample_period = (high bits) | ((low_bits) << 4);
However, current code just masks MaxCnt bits and shifts all of them,
including high bits, which is incorrect. Fix it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20250115054438.1021-4-ravi.bangoria@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46dcf85566170d4528b842bf83ffc350d71771fa ]
IBS Op uses two counters: MaxCnt and CurCnt. MaxCnt is programmed with
the desired sample period. IBS hw generates sample when CurCnt reaches
to MaxCnt. The size of these counter used to be 20 bits but later they
were extended to 27 bits. The 7 bit extension is indicated by CPUID
Fn8000_001B_EAX[6 / OpCntExt].
perf_ibs->cnt_mask variable contains bit masks for MaxCnt and CurCnt.
But IBS driver does not set upper 7 bits of CurCnt in cnt_mask even
when OpCntExt CPUID bit is set. Fix this.
IBS driver uses cnt_mask[CurCnt] bits only while disabling an event.
Fortunately, CurCnt bits are not read from MSR while re-enabling the
event, instead MaxCnt is programmed with desired period and CurCnt is
set to 0. Hence, we did not see any issues so far.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20250115054438.1021-5-ravi.bangoria@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21ee965267bcbdd733be0f35344fa0f0226d7861 ]
Currently in scmi_protocol_device_request(), no duplicate scmi device
name is allowed across any protocol. However scmi_dev_match_id() first
matches the protocol id and then the name. So, there is no strict
requirement to keep this scmi device name unique across all the protocols.
Relax the constraint on the duplicate name across the protocols and
inhibit only within the same protocol id.
Message-Id: <20250131141822.514342-1-sudeep.holla@arm.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0053f7d39d491b6138d7c526876d13885cbb65f1 ]
The `readlink(path, buf, sizeof(buf))` call reads at most sizeof(buf)
bytes and *does not* append null-terminator to buf. With respect to
that, fix two pieces in get_fd_type:
1. Change the truncation check to contain sizeof(buf) rather than
sizeof(path).
2. Append null-terminator to buf.
Reported by Coverity.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20250129071857.75182-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c81202906b5cd56db403e95db3d29c9dfc8c74c1 ]
The ast driver looks up supplied display modes from an internal list of
display modes supported by the VBIOS.
Do not use the crtc_-prefixed display values from struct drm_display_mode
for looking up the VBIOS mode. The fields contain raw values that the
driver programs to hardware. They are affected by display settings like
double-scan or interlace.
Instead use the regular vdisplay and hdisplay fields for lookup. As the
programmed values can now differ from the values used for lookup, set
struct drm_display_mode.crtc_vdisplay and .crtc_hdisplay from the VBIOS
mode.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-9-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d73a4bfa2881a6859b384b75a414c33d4898b055 ]
Since "LED_KANA" was defined as "0x04", the shift number should be "4".
Signed-off-by: junan <junan76@163.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 268c73d470a5790a492a2fc2ded084b909d144f3 ]
In case of MHI error a reset work will be queued which will try
napi_disable() after napi_synchronize().
As the napi will be only enabled after qmi_firmware_ready event,
trying napi_synchronize() before napi_enable() will result in
indefinite sleep in case of a firmware crash in QMI init sequence.
To avoid this, introduce napi_enabled flag to check if napi is enabled
or not before calling napi_synchronize().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Avula Sri Charan <quic_asrichar@quicinc.com>
Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250124090058.3194299-1-quic_tamizhr@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7081dc75df79696d8322d01821c28e53416c932c ]
Some of the allowed operations put the tape into a known position to
continue operation assuming only the tape position has changed. But reset
sets partition, density and block size to drive default values. These
should be restored to the values before reset.
Normally the current block size and density are stored by the drive. If
the settings have been changed, the changed values have to be saved by the
driver across reset.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250120194925.44432-2-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56c3d809b7b450379162d0b8a70bbe71ab8db706 ]
After a port swap between separate fabrics, there may be multiple nodes in
the vport's fc_nodes list with the same fabric well known address.
Duplication is temporary and eventually resolves itself after dev_loss_tmo
expires, but nameserver queries may still occur before dev_loss_tmo. This
possibly results in returning stale fabric ndlp objects. Fix by adding an
nlp_state check to ensure the ndlp search routine returns the correct newer
allocated ndlp fabric object.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250131000524.163662-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3a392bdd31adc474f1009ee85c13fdd01fe800d ]
Previous implementation assumes that there is 1:1 matching between
vectors and queues. It isn't always true.
Get minimum value from Rx/Tx queues to determine combined queues number.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ce939a0fa194939cc1f92dbd8bc1a7806e7d40a ]
The event may have been updated in the PMU-specific implementation,
e.g., Intel PEBS counters snapshotting. The common code should not
read and overwrite the value.
The PERF_SAMPLE_READ in the data->sample_type can be used to detect
whether the PMU-specific value is available. If yes, avoid the
pmu->read() in the common code. Add a new flag, skip_read, to track the
case.
Factor out a perf_pmu_read() to clean up the code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250121152303.3128733-3-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad6b5b73ff565e88aca7a7d1286788d80c97ba71 ]
rcu_all_qs() is defined for !CONFIG_PREEMPT_RCU but the declaration
is conditioned on CONFIG_PREEMPTION.
With CONFIG_PREEMPT_LAZY, CONFIG_PREEMPTION=y does not imply
CONFIG_PREEMPT_RCU=y.
Decouple the two.
Cc: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcf0e25ad4c8d14d2faab4d9a17040f31efce205 ]
rcu_read_unlock_strict() can be called with preemption enabled
which can make for an unstable rdp and a racy norm value.
Fix this by dropping the preempt-count in __rcu_read_unlock()
after the call to rcu_read_unlock_strict(), adjusting the
preempt-count check appropriately.
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83b28cfe796464ebbde1cf7916c126da6d572685 ]
With PREEMPT_RCU=n, cond_resched() provides urgently needed quiescent
states for read-side critical sections via rcu_all_qs().
One reason why this was needed: lacking preempt-count, the tick
handler has no way of knowing whether it is executing in a
read-side critical section or not.
With (PREEMPT_LAZY=y, PREEMPT_DYNAMIC=n), we get (PREEMPT_COUNT=y,
PREEMPT_RCU=n). In this configuration cond_resched() is a stub and
does not provide quiescent states via rcu_all_qs().
(PREEMPT_RCU=y provides this information via rcu_read_unlock() and
its nesting counter.)
So, use the availability of preempt_count() to report quiescent states
in rcu_flavor_sched_clock_irq().
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8c2d3932c1106af2764cc6869b29bcf3cb5bc47 ]
It can be needed to have some MSI-X allocated as static and rest as
dynamic. For example on PF VSI. We want to always have minimum one MSI-X
on it, because of that it is allocated as a static one, rest can be
dynamic if it is supported.
Change the ice_get_irq_res() to allow using static entries if they are
free even if caller wants dynamic one.
Adjust limit values to the new approach. Min and max in limit means the
values that are valid, so decrease max and num_static by one.
Set vsi::irq_dyn_alloc if dynamic allocation is supported.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
