[ Upstream commit 0d3c6b28896f9889c8864dab469e0343a0ad1c0c ]
commit 6398326b9b ("KVM: PPC: Book3S HV P9: Stop using vc->dpdes")
introduced an optimization to use only vcpu->doorbell_request for SMT
emulation for Power9 and above guests, but the code for nested guests
still relies on the old way of handling doorbells, due to which an L2
guest (see [1]) cannot be booted with XICS with SMT>1. The command to
repro this issue is:
// To be run in L1
qemu-system-ppc64 \
-drive file=rhel.qcow2,format=qcow2 \
-m 20G \
-smp 8,cores=1,threads=8 \
-cpu host \
-nographic \
-machine pseries,ic-mode=xics -accel kvm
Fix the plumbing to utilize vcpu->doorbell_request instead of vcore->dpdes
for nested KVM guests on P9 and above.
[1] Terminology
1. L0 : PowerNV linux running with HV privileges
2. L1 : Pseries KVM guest running on top of L0
2. L2 : Nested KVM guest running on top of L1
Fixes: 6398326b9b ("KVM: PPC: Book3S HV P9: Stop using vc->dpdes")
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241109063301.105289-3-gautam@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adc77b19f62d7e80f98400b2fca9d700d2afdd6f ]
Syzbot has reported the following KMSAN splat:
BUG: KMSAN: uninit-value in ocfs2_file_read_iter+0x9a4/0xf80
ocfs2_file_read_iter+0x9a4/0xf80
__io_read+0x8d4/0x20f0
io_read+0x3e/0xf0
io_issue_sqe+0x42b/0x22c0
io_wq_submit_work+0xaf9/0xdc0
io_worker_handle_work+0xd13/0x2110
io_wq_worker+0x447/0x1410
ret_from_fork+0x6f/0x90
ret_from_fork_asm+0x1a/0x30
Uninit was created at:
__alloc_pages_noprof+0x9a7/0xe00
alloc_pages_mpol_noprof+0x299/0x990
alloc_pages_noprof+0x1bf/0x1e0
allocate_slab+0x33a/0x1250
___slab_alloc+0x12ef/0x35e0
kmem_cache_alloc_bulk_noprof+0x486/0x1330
__io_alloc_req_refill+0x84/0x560
io_submit_sqes+0x172f/0x2f30
__se_sys_io_uring_enter+0x406/0x41c0
__x64_sys_io_uring_enter+0x11f/0x1a0
x64_sys_call+0x2b54/0x3ba0
do_syscall_64+0xcd/0x1e0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Since an instance of 'struct kiocb' may be passed from the block layer
with 'private' field uninitialized, introduce 'ocfs2_iocb_init_rw_locked()'
and use it from where 'ocfs2_dio_end_io()' might take care, i.e. in
'ocfs2_file_read_iter()' and 'ocfs2_file_write_iter()'.
Link: https://lkml.kernel.org/r/20241029091736.1501946-1-dmantipov@yandex.ru
Fixes: 7cdfc3a1c3 ("ocfs2: Remember rw lock level during direct io")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reported-by: syzbot+a73e253cca4f0230a5a5@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a73e253cca4f0230a5a5
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b51eb0874d8170028434fbd259e80b78ed9b8eca ]
cppc_get_cpu_power() return 0 if the policy is NULL. Then in
em_create_perf_table(), the later zero check for power is not valid
as power is uninitialized. As Quentin pointed out, kernel energy model
core check the return value of active_power() first, so if the callback
failed it should tell the core. So return -EINVAL to fix it.
Fixes: a78e72075642 ("cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw()")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be392aa80f1e5b0b65ccc2a540b9304fefcfe3d8 ]
cppc_get_cpu_cost() return 0 if the policy is NULL. Then in
em_compute_costs(), the later zero check for cost is not valid
as cost is uninitialized. As Quentin pointed out, kernel energy model
core check the return value of get_cost() first, so if the callback
failed it should tell the core. Return -EINVAL to fix it.
Fixes: 1a1374bb8c59 ("cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost()")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/c4765377-7830-44c2-84fa-706b6e304e10@stanley.mountain/
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5dbcb1c1900f45182b5651c89257c272f1f3ead7 ]
The FENCE indicator in hns WQE doesn't ensure that response data from
a previous Read/Atomic operation has been written to the requester's
memory before the subsequent Send/Write operation is processed. This
may result in the subsequent Send/Write operation accessing the original
data in memory instead of the expected response data.
Unlike FENCE, the SO (Strong Order) indicator blocks the subsequent
operation until the previous response data is written to memory and a
bresp is returned. Set the SO indicator instead of FENCE to maintain
strict order.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241108075743.2652258-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f65aa0ad79fca4ace921da0701644f020129043d ]
Memory access #VEs are hard for Linux to handle in contexts like the
entry code or NMIs. But other OSes need them for functionality.
There's a static (pre-guest-boot) way for a VMM to choose one or the
other. But VMMs don't always know which OS they are booting, so they
choose to deliver those #VEs so the "other" OSes will work. That,
unfortunately has left us in the lurch and exposed to these
hard-to-handle #VEs.
The TDX module has introduced a new feature. Even if the static
configuration is set to "send nasty #VEs", the kernel can dynamically
request that they be disabled. Once they are disabled, access to private
memory that is not in the Mapped state in the Secure-EPT (SEPT) will
result in an exit to the VMM rather than injecting a #VE.
Check if the feature is available and disable SEPT #VE if possible.
If the TD is allowed to disable/enable SEPT #VEs, the ATTR_SEPT_VE_DISABLE
attribute is no longer reliable. It reflects the initial state of the
control for the TD, but it will not be updated if someone (e.g. bootloader)
changes it before the kernel starts. Kernel must check TDCS_TD_CTLS bit to
determine if SEPT #VEs are enabled or disabled.
[ dhansen: remove 'return' at end of function ]
Fixes: 373e715e31 ("x86/tdx: Panic on bad configs that #VE on "private" memory access")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/20241104103803.195705-4-kirill.shutemov%40linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5081e8fadb809253c911b349b01d87c5b4e3fec5 ]
The TDG_VM_WR TDCALL is used to ask the TDX module to change some
TD-specific VM configuration. There is currently only one user in the
kernel of this TDCALL leaf. More will be added shortly.
Refactor to make way for more users of TDG_VM_WR who will need to modify
other TD configuration values.
Add a wrapper for the TDG_VM_RD TDCALL that requests TD-specific
metadata from the TDX module. There are currently no users for
TDG_VM_RD. Mark it as __maybe_unused until the first user appears.
This is preparation for enumeration and enabling optional TD features.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/all/20241104103803.195705-2-kirill.shutemov%40linux.intel.com
Stable-dep-of: f65aa0ad79fc ("x86/tdx: Dynamically disable SEPT violations from causing #VEs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57a420bb8186d1d0178b857e5dd5026093641654 ]
Currently, the TDX_MODULE_CALL asm macro, which handles both TDCALL and
SEAMCALL, takes one parameter for each input register and an optional
'struct tdx_module_output' (a collection of output registers) as output.
This is different from the TDX_HYPERCALL macro which uses a single
'struct tdx_hypercall_args' to carry all input/output registers.
The newer TDX versions introduce more TDCALLs/SEAMCALLs which use more
input/output registers. Also, the TDH.VP.ENTER (which isn't covered
by the current TDX_MODULE_CALL macro) basically can use all registers
that the TDX_HYPERCALL does. The current TDX_MODULE_CALL macro isn't
extendible to cover those cases.
Similar to the TDX_HYPERCALL macro, simplify the TDX_MODULE_CALL macro
to use a single structure 'struct tdx_module_args' to carry all the
input/output registers. Currently, R10/R11 are only used as output
register but not as input by any TDCALL/SEAMCALL. Change to also use
R10/R11 as input register to make input/output registers symmetric.
Currently, the TDX_MODULE_CALL macro depends on the caller to pass a
non-NULL 'struct tdx_module_output' to get additional output registers.
Similar to the TDX_HYPERCALL macro, change the TDX_MODULE_CALL macro to
take a new 'ret' macro argument to indicate whether to save the output
registers to the 'struct tdx_module_args'. Also introduce a new
__tdcall_ret() for that purpose, similar to the __tdx_hypercall_ret().
Note the tdcall(), which is a wrapper of __tdcall(), is called by three
callers: tdx_parse_tdinfo(), tdx_get_ve_info() and tdx_early_init().
The former two need the additional output but the last one doesn't. For
simplicity, make tdcall() always call __tdcall_ret() to avoid another
"_ret()" wrapper. The last caller tdx_early_init() isn't performance
critical anyway.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/483616c1762d85eb3a3c3035a7de061cfacf2f14.1692096753.git.kai.huang%40intel.com
Stable-dep-of: f65aa0ad79fc ("x86/tdx: Dynamically disable SEPT violations from causing #VEs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0024dbfc48d8814d915eb5bd5253496b9b8a6df ]
The TDX spec names all TDCALLs with prefix "TDG". Currently, the kernel
doesn't follow such convention for the macros of those TDCALLs but uses
prefix "TDX_" for all of them. Although it's arguable whether the TDX
spec names those TDCALLs properly, it's better for the kernel to follow
the spec when naming those macros.
Change all macros of TDCALLs to make them consistent with the spec. As
a bonus, they get distinguished easily from the host-side SEAMCALLs,
which all have prefix "TDH".
No functional change intended.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/516dccd0bd8fb9a0b6af30d25bb2d971aa03d598.1692096753.git.kai.huang%40intel.com
Stable-dep-of: f65aa0ad79fc ("x86/tdx: Dynamically disable SEPT violations from causing #VEs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4045de893f691f75193c606aec440c365cf7a7be ]
In 2010, runtime power management support was implemented in the SCSI
core. The description of patch "[SCSI] implement runtime Power
Management" mentions that the sg driver is skipped but not why. This
patch enables runtime power management even if an instance of the sg
driver is held open. Enabling runtime PM for the sg driver is safe
because all interactions of the sg driver with the SCSI device pass
through the block layer (blk_execute_rq_nowait()) and the block layer
already supports runtime PM.
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Fixes: bc4f24014d ("[SCSI] implement runtime Power Management")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241030220310.1373569-1-bvanassche@acm.org
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82e33f249f1126cf3c5f39a31b850d485ac33bc3 ]
Coccinelle complains about the nested reuse of the pointer `iter' with
different pointer type:
./fs/proc/kcore.c:515:26-30: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:534:23-27: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:550:40-44: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:568:27-31: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:581:28-32: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:599:27-31: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:607:38-42: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:614:26-30: ERROR: invalid reference to the index variable of the iterator on line 499
Replacing `struct kcore_list *iter' with `struct kcore_list *tmp' doesn't change the
scope and the functionality is the same and coccinelle seems happy.
NOTE: There was an issue with using `struct kcore_list *pos' as the nested iterator.
The build did not work!
[akpm@linux-foundation.org: s/tmp/pos/]
Link: https://lkml.kernel.org/r/20241029054651.86356-2-mtodorovac69@gmail.com
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Link: https://lkml.kernel.org/r/20220331223700.902556-1-jakobkoschel@gmail.com
Fixes: 04d168c6d4 ("fs/proc/kcore.c: remove check of list iterator against head past the loop body")
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Brian Johannesmeyer" <bjohannesmeyer@gmail.com>
Cc: Cristiano Giuffrida <c.giuffrida@vu.nl>
Cc: "Bos, H.J." <h.j.bos@vu.nl>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Yan Zhen <yanzhen@vivo.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f07b652384969f5d0b317e1daa5f2eb967bc73d ]
Do not require the presence of `$balanced_parens` to get the commit SHA;
this allows a `Fixes: deadbeef` tag to get a correct suggestion rather
than a suggestion containing a reference to HEAD.
Given this patch:
: From: Tamir Duberstein <tamird@gmail.com>
: Subject: Test patch
: Date: Fri, 25 Oct 2024 19:30:51 -0400
:
: This is a test patch.
:
: Fixes: bd17e036b4
: Signed-off-by: Tamir Duberstein <tamird@gmail.com>
: --- /dev/null
: +++ b/new-file
: @@ -0,0 +1 @@
: +Test.
Before:
WARNING: Please use correct Fixes: style 'Fixes: <12 chars of sha1> ("<title line>")' - ie: 'Fixes: c10a7d25e68f ("Test patch")'
After:
WARNING: Please use correct Fixes: style 'Fixes: <12 chars of sha1> ("<title line>")' - ie: 'Fixes: bd17e036b4 ("checkpatch: warn for non-standard fixes tag style")'
The prior behavior incorrectly suggested the patch's own SHA and title
line rather than the referenced commit's. This fixes that.
Ironically this:
Fixes: bd17e036b4 ("checkpatch: warn for non-standard fixes tag style")
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Louis Peens <louis.peens@corigine.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Cc: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5d6281ae8e0c929c3ff188652f5b12c680fe8bf ]
This check looks for common words that probably indicate a patch
is a fix. For now the regex is:
(?:(?:BUG: K.|UB)SAN: |Call Trace:|stable\@|syzkaller)/)
Why are stable patches encouraged to have a fixes tag? Some people mark
their stable patches as "# 5.10" etc. This is useful but a Fixes tag is
still a good idea. For example, the Fixes tag helps in review. It
helps people to not cherry-pick buggy patches without also
cherry-picking the fix.
Also if a bug affects the 5.7 kernel some people will round it up to
5.10+ because 5.7 is not supported on kernel.org. It's possible the Bad
Binder bug was caused by this sort of gap where companies outside of
kernel.org are supporting different kernels from kernel.org.
Should it be counted as a Fix when a patch just silences harmless
WARN_ON() stack trace. Yes. Definitely.
Is silencing compiler warnings a fix? It seems unfair to the original
authors, but we use -Werror now, and warnings break the build so let's
just add Fixes tags. I tell people that silencing static checker
warnings is not a fix but the rules on this vary by subsystem.
Is fixing a minor LTP issue (Linux Test Project) a fix? Probably? It's
hard to know what to do if the LTP test has technically always been
broken.
One clear false positive from this check is when someone updated their
debug output and included before and after Call Traces. Or when crashes
are introduced deliberately for testing. In those cases, you should
just ignore checkpatch.
Link: https://lkml.kernel.org/r/ZmhUgZBKeF_8ixA6@moroto
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 2f07b6523849 ("checkpatch: always parse orig_commit in fixes tag")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1645676f25d2c846798f0233c3a953efd62aafb ]
There are some issues in pgtable_walk():
1. Super page is dumped as non-present page
2. dma_pte_superpage() should not check against leaf page table entries
3. Pointer pte is never NULL so checking it is meaningless
4. When an entry is not present, it still makes sense to dump the entry
content.
Fix 1,2 by checking dma_pte_superpage()'s returned value after level check.
Fix 3 by removing pte check.
Fix 4 by checking present bit after printing.
By this chance, change to print "page table not present" instead of "PTE
not present" to be clearer.
Fixes: 914ff7719e ("iommu/vt-d: Dump DMAR translation structure when DMA fault occurs")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/r/20241024092146.715063-3-zhenzhong.duan@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ceb93f952f6ca34823ce3650c902c31b8385b40 ]
There are some issues in dmar_fault_dump_ptes():
1. return value of phys_to_virt() is used for checking if an entry is
present.
2. dump is confusing, e.g., "pasid table entry is not present", confusing
by unpresent pasid table vs. unpresent pasid table entry. Current code
means the former.
3. pgtable_walk() is called without checking if page table is present.
Fix 1 by checking present bit of an entry before dump a lower level entry.
Fix 2 by removing "entry" string, e.g., "pasid table is not present".
Fix 3 by checking page table present before walk.
Take issue 3 for example, before fix:
[ 442.240357] DMAR: pasid dir entry: 0x000000012c83e001
[ 442.246661] DMAR: pasid table entry[0]: 0x0000000000000000
[ 442.253429] DMAR: pasid table entry[1]: 0x0000000000000000
[ 442.260203] DMAR: pasid table entry[2]: 0x0000000000000000
[ 442.266969] DMAR: pasid table entry[3]: 0x0000000000000000
[ 442.273733] DMAR: pasid table entry[4]: 0x0000000000000000
[ 442.280479] DMAR: pasid table entry[5]: 0x0000000000000000
[ 442.287234] DMAR: pasid table entry[6]: 0x0000000000000000
[ 442.293989] DMAR: pasid table entry[7]: 0x0000000000000000
[ 442.300742] DMAR: PTE not present at level 2
After fix:
...
[ 357.241214] DMAR: pasid table entry[6]: 0x0000000000000000
[ 357.248022] DMAR: pasid table entry[7]: 0x0000000000000000
[ 357.254824] DMAR: scalable mode page table is not present
Fixes: 914ff7719e ("iommu/vt-d: Dump DMAR translation structure when DMA fault occurs")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/r/20241024092146.715063-2-zhenzhong.duan@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e81361f6cf9bf4a1848b0813bc4becb2250870b8 ]
The scu clk_ops only inplements prepare() and unprepare() callback.
Saving the clock state during suspend by checking clk_hw_is_enabled()
is not safe as it's possible that some device drivers may only
disable the clocks without unprepare. Then the state retention will not
work for such clocks.
Fixing it by checking clk_hw_is_prepared() which is more reasonable
and safe.
Fixes: d0409631f4 ("clk: imx: scu: add suspend/resume support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-4-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff4279618f0aec350b0fb41b2b35841324fbd96e ]
To i.MX93 which features dual Cortex-A55 cores and DSU, when using
writel_relaxed to write value to PLL registers, the value might be
buffered. To make sure the value has been written into the hardware,
using readl to read back the register could achieve the goal.
current PLL power up flow can be simplified as below:
1. writel_relaxed to set the PLL POWERUP bit;
2. readl_poll_timeout to check the PLL lock bit:
a). timeout = ktime_add_us(ktime_get(), timeout_us);
b). readl the pll the lock reg;
c). check if the pll lock bit ready
d). check if timeout
But in some corner cases, both the write in step 1 and read in
step 2 will be blocked by other bus transaction in the SoC for a
long time, saying the value into real hardware is just before step b).
That means the timeout counting has begins for quite sometime since
step a), but value still not written into real hardware until bus
released just at a point before step b).
Then there maybe chances that the pll lock bit is not ready
when readl done but the timeout happens. readl_poll_timeout will
err return due to timeout. To avoid such unexpected failure,
read back the reg to make sure the write has been done in HW
reg.
So use readl after writel_relaxed to fix the issue.
Since we are here, to avoid udelay to run before writel_relaxed, use
readl before udelay.
Fixes: 1b26cb8a77 ("clk: imx: support fracn gppll")
Co-developed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-3-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 557be501c38e1864b948fc6ccdf4b035d610a2ea ]
Per i.MX93 Reference Mannual 22.4 Initialization information
1. Program appropriate value of DIV[ODIV], DIV[RDIV] and DIV[MFI]
as per Integer mode.
2. Wait for 5 μs.
3. Program the following field in CTRL register.
Set CTRL[POWERUP] to 1'b1 to enable PLL block.
4. Poll PLL_STATUS[PLL_LOCK] register, and wait till PLL_STATUS[PLL_LOCK]
is 1'b1 and pll_lock output signal is 1'b1.
5. Set CTRL[CLKMUX_EN] to 1'b1 to enable PLL output clock.
So move the CLKMUX_EN operation after PLL locked.
Fixes: 1b26cb8a77 ("clk: imx: support fracn gppll")
Co-developed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-2-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ee063fac85656bea9cfe3570af147ba1701ba18 ]
Back-to-back LPCG writes can be ignored by the LPCG register due to
a HW bug. The writes need to be separated by at least 4 cycles of
the gated clock. See https://www.nxp.com.cn/docs/en/errata/IMX8_1N94W.pdf
The workaround is implemented as follows:
1. For clocks running greater than or equal to 24MHz, a read
followed by the write will provide sufficient delay.
2. For clocks running below 24MHz, add a delay of 4 clock cylces
after the write to the LPCG register.
Fixes: 2f77296d3d ("clk: imx: add lpcg clock support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-1-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60821fb4dd7345e5662094accf0a52845306de8c ]
In the section "4.7 Precise effects on interrupt-pending bits"
of the RISC-V AIA specification defines that:
"If the source mode is Level1 or Level0 and the interrupt domain
is configured in MSI delivery mode (domaincfg.DM = 1):
The pending bit is cleared whenever the rectified input value is
low, when the interrupt is forwarded by MSI, or by a relevant
write to an in_clrip register or to clripnum."
Update the aplic_write_pending() to match the spec.
Fixes: d8dd9f113e16 ("RISC-V: KVM: Fix APLIC setipnum_le/be write emulation")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20241029085542.30541-1-yongxuan.wang@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0f253a52ccee3cf3eb987e99756e20c68a1aac9 ]
To work around a limitation in our clock modelling, we try to force two
bits in the AUDIO0 PLL to 0, in the CCU probe routine.
However the ~ operator only applies to the first expression, and does
not cover the second bit, so we end up clearing only bit 1.
Group the bit-ORing with parentheses, to make it both clearer to read
and actually correct.
Fixes: 35b97bb941 ("clk: sunxi-ng: Add support for the D1 SoC clocks")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241001105016.1068558-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 808ca6de989c598bc5af1ae0ad971a66077efac0 ]
Invalidate rkey is cpu endian and immediate data is in big endian format.
Both immediate data and invalidate the remote key returned by
HW is in little endian format.
While handling the commit in fixes tag, the difference between
immediate data and invalidate rkey endianness was not considered.
Without changes of this patch, Kernel ULP was failing while processing
inv_rkey.
dmesg log snippet -
nvme nvme0: Bogus remote invalidation for rkey 0x2000019Fix in this patch
Do endianness conversion based on completion queue entry flag.
Also, the HW completions are already converted to host endianness in
bnxt_qplib_cq_process_res_rc and bnxt_qplib_cq_process_res_ud and there
is no need to convert it again in bnxt_re_poll_cq. Modified the union to
hold the correct data type.
Fixes: 95b087f87b78 ("bnxt_re: Fix imm_data endianness")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1730110014-20755-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 323275ac2ff15b2b7b3eac391ae5d8c5a3c3a999 ]
During reset, cmd to destroy resources such as qp, cq, and mr may fail,
and error logs will be printed. When a large number of resources are
destroyed, there will be lots of printings, and it may lead to a cpu
stuck.
Delete some unnecessary printings and replace other printing functions
in these paths with the ratelimited version.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Fixes: 70f9252158 ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 571e4ab8a45e530623ab129803f090a844dd3fe9 ]
eq_db_ci is updated only after all AEQEs are processed in the AEQ
interrupt handler, which is not timely enough and may result in
AEQ overflow. Two optimization methods are proposed:
1. Set an upper limit for AEQE processing.
2. Move time-consuming operations such as printings to the bottom
half of the interrupt.
cmd events and flush_cqe events are still fully processed in the top half
to ensure timely handling.
Fixes: a5073d6054 ("RDMA/hns: Add eq support of hip08")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a1374bb8c5926674973d849feed500bc61ad535 ]
cpufreq_cpu_get_raw() may return NULL if the cpu is not in
policy->cpus cpu mask and it will cause null pointer dereference,
so check NULL for cppc_get_cpu_cost().
Fixes: 740fcdc2c2 ("cpufreq: CPPC: Register EM based on efficiency class information")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a78e7207564258db6e373e86294a85f9d646d35a ]
cpufreq_cpu_get_raw() may return NULL if the cpu is not in
policy->cpus cpu mask and it will cause null pointer dereference.
Fixes: 740fcdc2c2 ("cpufreq: CPPC: Register EM based on efficiency class information")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06dbbb4d5f7126b6307ab807cbf04ecfc459b933 ]
copy_from_kernel_nofault() can be called when doing read of /proc/kcore.
/proc/kcore can have some unmapped kfence objects which when read via
copy_from_kernel_nofault() can cause page faults. Since *_nofault()
functions define their own fixup table for handling fault, use that
instead of asking kfence to handle such faults.
Hence we search the exception tables for the nip which generated the
fault. If there is an entry then we let the fixup table handler handle the
page fault by returning an error from within ___do_page_fault().
This can be easily triggered if someone tries to do dd from /proc/kcore.
eg. dd if=/proc/kcore of=/dev/null bs=1M
Some example false negatives:
===============================
BUG: KFENCE: invalid read in copy_from_kernel_nofault+0x9c/0x1a0
Invalid read at 0xc0000000fdff0000:
copy_from_kernel_nofault+0x9c/0x1a0
0xc00000000665f950
read_kcore_iter+0x57c/0xa04
proc_reg_read_iter+0xe4/0x16c
vfs_read+0x320/0x3ec
ksys_read+0x90/0x154
system_call_exception+0x120/0x310
system_call_vectored_common+0x15c/0x2ec
BUG: KFENCE: use-after-free read in copy_from_kernel_nofault+0x9c/0x1a0
Use-after-free read at 0xc0000000fe050000 (in kfence-#2):
copy_from_kernel_nofault+0x9c/0x1a0
0xc00000000665f950
read_kcore_iter+0x57c/0xa04
proc_reg_read_iter+0xe4/0x16c
vfs_read+0x320/0x3ec
ksys_read+0x90/0x154
system_call_exception+0x120/0x310
system_call_vectored_common+0x15c/0x2ec
Fixes: 90cbac0e99 ("powerpc: Enable KFENCE for PPC32")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/a411788081d50e3b136c6270471e35aba3dfafa3.1729271995.git.ritesh.list@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d734f1bfc336aaea91313a5632f2f197608fadd ]
The pmecc "user" structure is allocated in atmel_pmecc_create_user() and
was supposed to be freed with atmel_pmecc_destroy_user(), but this other
helper is never called. One solution would be to find the proper
location to call the destructor, but the trend today is to switch to
device managed allocations, which in this case fits pretty well.
Replace kzalloc() by devm_kzalloc() and drop the destructor entirely.
Reported-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Closes: https://lore.kernel.org/all/ZvmIvRJCf6VhHvpo@gallifrey/
Fixes: f88fc122cc ("mtd: nand: Cleanup/rework the atmel_nand driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20241001203149.387655-1-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit baaa90c1c923ff2412fae0162eb66d036fd3be6b ]
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-11-u.kleine-koenig@pengutronix.de
Stable-dep-of: 7d189579a287 ("mtd: hyperbus: rpc-if: Add missing MODULE_DEVICE_TABLE")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05b94cae1c47f94588c3e7096963c1007c4d9c1d ]
During early init CMA_MIN_ALIGNMENT_BYTES can be PAGE_SIZE,
since pageblock_order is still zero and it gets initialized
later during initmem_init() e.g.
setup_arch() -> initmem_init() -> sparse_init() -> set_pageblock_order()
One such use case where this causes issue is -
early_setup() -> early_init_devtree() -> fadump_reserve_mem() -> fadump_cma_init()
This causes CMA memory alignment check to be bypassed in
cma_init_reserved_mem(). Then later cma_activate_area() can hit
a VM_BUG_ON_PAGE(pfn & ((1 << order) - 1)) if the reserved memory
area was not pageblock_order aligned.
Fix it by moving the fadump_cma_init() after initmem_init(),
where other such cma reservations also gets called.
<stack trace>
==============
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10010
flags: 0x13ffff800000000(node=1|zone=0|lastcpupid=0x7ffff) CMA
raw: 013ffff800000000 5deadbeef0000100 5deadbeef0000122 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: VM_BUG_ON_PAGE(pfn & ((1 << order) - 1))
------------[ cut here ]------------
kernel BUG at mm/page_alloc.c:778!
Call Trace:
__free_one_page+0x57c/0x7b0 (unreliable)
free_pcppages_bulk+0x1a8/0x2c8
free_unref_page_commit+0x3d4/0x4e4
free_unref_page+0x458/0x6d0
init_cma_reserved_pageblock+0x114/0x198
cma_init_reserved_areas+0x270/0x3e0
do_one_initcall+0x80/0x2f8
kernel_init_freeable+0x33c/0x530
kernel_init+0x34/0x26c
ret_from_kernel_user_thread+0x14/0x1c
Fixes: 11ac3e87ce ("mm: cma: use pageblock_order as the single alignment")
Suggested-by: David Hildenbrand <david@redhat.com>
Reported-by: Sachin P Bappalige <sachinpb@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/3ae208e48c0d9cefe53d2dc4f593388067405b7d.1729146153.git.ritesh.list@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adfaec30ffaceecd565e06adae367aa944acc3c9 ]
We anyway don't use any return values from fadump_cma_init(). Since
fadump_reserve_mem() from where fadump_cma_init() gets called today,
already has the required checks.
This patch makes this function return type as void. Let's also handle
extra cases like return if fadump_supported is false or dump_active, so
that in later patches we can call fadump_cma_init() separately from
setup_arch().
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/a2afc3d6481a87a305e89cfc4a3f3d2a0b8ceab3.1729146153.git.ritesh.list@gmail.com
Stable-dep-of: 05b94cae1c47 ("powerpc/fadump: Move fadump_cma_init to setup_arch() after initmem_init()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
