It is unexpected that the reset work is running simultaneously with
the suspend or resume context and it is possible that reset work is still
running even after mt7921 is suspended if we don't fix the race issue.
Thus, the suspend procedure should be waiting until the reset is completed
at the beginning and ignore the subsequent the reset requests.
In case there is an error that happens during either suspend or resume
handler, we will schedule a reset task to recover the error before
returning the error code to ensure we can immediately fix the error there.
Fixes: ca74b9b907 ("mt76: mt7921s: add reset support")
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
It is unexpected that the reset work is running simultaneously with
the suspend or resume context and it is possible that reset work is still
running even after mt7921 is suspended if we don't fix the race issue.
Thus, the suspend procedure should be waiting until the reset is completed
at the beginning and ignore the subsequent the reset requests.
In case there is an error that happens during either suspend or resume
handler, we will schedule a reset task to recover the error before
returning the error code to ensure we can immediately fix the error there.
Fixes: 0c1ce98846 ("mt76: mt7921: add wifi reset support")
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce rx_check callback support for mt7663u and mt7921u drivers.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Compared to fixed payload packets, random payload packets have better
measured EVM under the same txpower. Our tests show EVM becomes at least
2-3 dB better in test cases with high rate and long tx length, which also
aligns the testing results to proprietary driver.
Suggested-by: Jm Chen <jm.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce mt76_connac_reg_map structure in mt76-connac module since it
is used by all connac2 chipset. Align structure definitions.
This is a preliminary patch to add mt7990 chipset support.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Found by comparing with the vendor driver. Currently this affects
only the RTL8192EU, which is the only gen2 chip with 2 TX paths
supported by this driver. It's unclear what kind of effect the
mistake had in practice, since I don't have any RTL8192EU devices
to test it.
Fixes: e1547c535e ("rtl8xxxu: First stab at adding IQK calibration for 8723bu parts")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/30a59f3a-cfa9-8379-7af0-78a8f4c77cfd@gmail.com
The range of calibration time of RX DCK is quite wide from ~40us to
~1300us by experiments, and probability is about 0.1% for the cases larger
than 1000us. Though it can retry calibration and get positive result, it
will spend more time. Therefore, enlarge it to avoid warning and duplicate
calibration.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220908051257.25353-4-pkshih@realtek.com
We can call this in one of two ways: through mac80211, where
we're already in an RCU read-side critical section, or from
some other code in the driver where this pointer can only be
NULL. In any case, we get a 'free' already protected pointer
to the sta through info->control.sta, so we can use it on
the stack without any further protection.
Remove the rcu_dereference() and critical section.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220904212910.e5bc20dd17bf.Ib570ff7fde33c2b6eddef493a3541fa04eb47181@changeid
rtl8xxxu_queue_select() selects the wrong TX queues because it's
reading memory from the wrong address. It expects to find ieee80211_hdr
at skb->data, but that's not the case after skb_push(). Move the call
to rtl8xxxu_queue_select() before the call to skb_push().
Fixes: 26f1fad29a ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/7fa4819a-4f20-b2af-b7a6-8ee01ac49295@gmail.com
The Chuwi Hi8 Pro tablet contains quite generic names in the sys_vendor
and product_name DMI strings, without this patch brcmfmac will try to load:
"brcmfmac43430a0-sdio.Default string-Default string.txt" as nvram file
which is way too generic.
The Chuwi Hi8 Pro uses the same Ampak AP6212 module as the Chuwi Vi8 Plus
and the nvram for the Vi8 Plus is already in linux-firmware, so point
the new DMI nvram filename quirk to the Vi8 Plus nvram file.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220810142333.141044-1-hdegoede@redhat.com
Many devices ship with a nvram ccode value of X2/XT/XU/XV/ALL which are
all special world-wide compatibility ccode-s. Most of these world-wide
ccode-s allow passive scan mode only for 2.4GHz channels 12-14,
only enabling them when an AP is seen on them.
Since linux-firmware has moved to the new cyfmac43430-sdio.bin +
cyfmac43430-sdio.clm_blob firmware files this no longer works and
43430 devices using e.g. an X2 ccode fail to connect to an AP on
channel 13.
Add the 43430 chip-id to the list of chips for which to use the ISO3166
country code + rev 0 as fallback in brcmf_translate_country_code() to
fix this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220810142328.141030-1-hdegoede@redhat.com
In preparation for FORTIFY_SOURCE performing run-time destination buffer
bounds checking for memcpy(), refactor the use of struct iwl_calib_result:
- Have struct iwl_calib_result contain struct iwl_calib_cmd since
functions expect to operate on the "data" flex array in "cmd", which
follows the "hdr" member.
- Switch argument passing around to use struct iwl_calib_cmd instead of
struct iwl_calib_hdr to prepare functions to see the "data" member.
- Change iwl_calib_set()'s "len" argument to a size_t since it is always
unsigned and is normally receiving the output of sizeof().
- Add an explicit length sanity check in iwl_calib_set().
- Adjust the memcpy() to avoid copying across the now visible composite
flex array structure.
This avoids the future run-time warning:
memcpy: detected field-spanning write (size 8) of single field "&res->hdr" (size 4)
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Reported-by: Andy Lavr <andy.lavr@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220901204558.2256458-1-keescook@chromium.org
One of my previous patches here changed the function prototype,
but since it was (half?) automated, I didn't update the docs.
Fix that now.
Fixes: b3e2130bf5 ("wifi: mac80211: change QoS settings API to take link into account")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
By default, even in client mode, hwsim always had all links
active, where it then uses them in a round-robin fashion.
Re-enable that by activating all valid links work right after
the connection is authorized.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement an API function and debugfs file to switch
active links.
Also provide an async version of the API so drivers
can call it in arbitrary contexts, e.g. while in the
authorized callback.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The A-MSDU data needs to be stored per-link and aggregated into a single
value for the station. Add a new struct ieee_80211_sta_aggregates in
order to store this data and a new function
ieee80211_sta_recalc_aggregates to update the current data for the STA.
Note that in the non MLO case the pointer in ieee80211_sta will directly
reference the data in deflink.agg, which means that recalculation may be
skipped in that case.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add macros (and an exported function) to allow checking some
link RCU protected accesses that are happening in callbacks
from mac80211 and are thus under the correct lock.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In hwsim we now track when we receive NDP (or other frames
carrying a PM bit) to see if a link should be active, but
then of course we also need to transmit NDPs to at least
set a link to inactive when we deacivate it. Implement that
as well as sending an NDP when we activate a link, which
allows receiving frames before transmitting any.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a link_id parameter to ieee80211_nullfunc_get() to be
able to obtain a correctly addressed frame.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Track the powersave bit on frames where we can look up
the STA by link addresses and set the links active or
inactive accordingly, and use this information to TX
only on links that are actually active in the peer.
Note that this doesn't implement powersave fully so
if no link is active things will not work right.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
