commit 8dec88070d upstream.
Haibo Li reported:
| Unable to handle kernel paging request at virtual address
| ffffff802a0d8d7171
| Mem abort info⭕
| ESR = 0x9600002121
| EC = 0x25: DABT (current EL), IL = 32 bitsts
| SET = 0, FnV = 0 0
| EA = 0, S1PTW = 0 0
| FSC = 0x21: alignment fault
| Data abort info⭕
| ISV = 0, ISS = 0x0000002121
| CM = 0, WnR = 0 0
| swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000002835200000
| [ffffff802a0d8d71] pgd=180000005fbf9003, p4d=180000005fbf9003,
| pud=180000005fbf9003, pmd=180000005fbe8003, pte=006800002a0d8707
| Internal error: Oops: 96000021 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 2 PID: 45 Comm: kworker/u8:2 Not tainted
| 5.15.78-android13-8-g63561175bbda-dirty #1
| ...
| pc : kcsan_setup_watchpoint+0x26c/0x6bc
| lr : kcsan_setup_watchpoint+0x88/0x6bc
| sp : ffffffc00ab4b7f0
| x29: ffffffc00ab4b800 x28: ffffff80294fe588 x27: 0000000000000001
| x26: 0000000000000019 x25: 0000000000000001 x24: ffffff80294fdb80
| x23: 0000000000000000 x22: ffffffc00a70fb68 x21: ffffff802a0d8d71
| x20: 0000000000000002 x19: 0000000000000000 x18: ffffffc00a9bd060
| x17: 0000000000000001 x16: 0000000000000000 x15: ffffffc00a59f000
| x14: 0000000000000001 x13: 0000000000000000 x12: ffffffc00a70faa0
| x11: 00000000aaaaaaab x10: 0000000000000054 x9 : ffffffc00839adf8
| x8 : ffffffc009b4cf00 x7 : 0000000000000000 x6 : 0000000000000007
| x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffffffc00a70fb70
| x2 : 0005ff802a0d8d71 x1 : 0000000000000000 x0 : 0000000000000000
| Call trace:
| kcsan_setup_watchpoint+0x26c/0x6bc
| __tsan_read2+0x1f0/0x234
| inflate_fast+0x498/0x750
| zlib_inflate+0x1304/0x2384
| __gunzip+0x3a0/0x45c
| gunzip+0x20/0x30
| unpack_to_rootfs+0x2a8/0x3fc
| do_populate_rootfs+0xe8/0x11c
| async_run_entry_fn+0x58/0x1bc
| process_one_work+0x3ec/0x738
| worker_thread+0x4c4/0x838
| kthread+0x20c/0x258
| ret_from_fork+0x10/0x20
| Code: b8bfc2a8 2a0803f7 14000007 d503249f (78bfc2a8) )
| ---[ end trace 613a943cb0a572b6 ]-----
The reason for this is that on certain arm64 configuration since
e35123d83e ("arm64: lto: Strengthen READ_ONCE() to acquire when
CONFIG_LTO=y"), READ_ONCE() may be promoted to a full atomic acquire
instruction which cannot be used on unaligned addresses.
Fix it by avoiding READ_ONCE() in read_instrumented_memory(), and simply
forcing the compiler to do the required access by casting to the
appropriate volatile type. In terms of generated code this currently
only affects architectures that do not use the default READ_ONCE()
implementation.
The only downside is that we are not guaranteed atomicity of the access
itself, although on most architectures a plain load up to machine word
size should still be atomic (a fact the default READ_ONCE() still relies
on itself).
Reported-by: Haibo Li <haibo.li@mediatek.com>
Tested-by: Haibo Li <haibo.li@mediatek.com>
Cc: <stable@vger.kernel.org> # 5.17+
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0489f6e22 upstream.
If mtd_otp_nvmem_add() fails, the partitions won't be removed
because there is simply no call to del_mtd_partitions().
Unfortunately, add_mtd_partitions() will print all partitions to
the kernel console. If mtd_otp_nvmem_add() returns -EPROBE_DEFER
this would print the partitions multiple times to the kernel
console. Instead move mtd_otp_nvmem_add() to the beginning of the
function.
Fixes: 4b361cfa86 ("mtd: core: add OTP nvmem provider support")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230308082021.870459-3-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cd9ceaa52 upstream.
Commit c048b60d39 ("mtd: core: provide unique name for nvmem device")
tries to give the nvmem device a unique name, but fails badly if the mtd
device doesn't have a "struct device" associated with it, i.e. if
CONFIG_MTD_PARTITIONED_MASTER is not set. This will result in the name
"(null)-user-otp", which is not unique. It seems the best we can do is
to use the compatible name together with a unique identifier added by
the nvmem subsystem by using NVMEM_DEVID_AUTO.
Fixes: c048b60d39 ("mtd: core: provide unique name for nvmem device")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230308082021.870459-1-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc05e06e60 upstream.
Commit 7e55c60acf ("md/raid5: Pivot raid5_make_request()") changed the
order in which requests for underlying disks are created. Since for
large sequential IO adding of requests frequently races with md_raid5
thread submitting bios to underlying disks, this results in a change in
IO pattern because intermediate states of new order of request creation
result in more smaller discontiguous requests. For RAID5 on top of three
rotational disks our performance testing revealed this results in
regression in write throughput:
iozone -a -s 131072000 -y 4 -q 8 -i 0 -i 1 -R
before 7e55c60acf:
KB reclen write rewrite read reread
131072000 4 493670 525964 524575 513384
131072000 8 540467 532880 512028 513703
after 7e55c60acf:
KB reclen write rewrite read reread
131072000 4 421785 456184 531278 509248
131072000 8 459283 456354 528449 543834
To reduce the amount of discontiguous requests we can start generating
requests with the stripe with the lowest chunk offset as that has the
best chance of being adjacent to IO queued previously. This improves the
performance to:
KB reclen write rewrite read reread
131072000 4 497682 506317 518043 514559
131072000 8 514048 501886 506453 504319
restoring big part of the regression.
Fixes: 7e55c60acf ("md/raid5: Pivot raid5_make_request()")
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230417171537.17899-1-jack@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a405c6f022 upstream.
init_resync() inits mempool and sets conf->have_replacemnt at the beginning
of sync, close_sync() frees the mempool when sync is completed.
After [1] recovery might be skipped and init_resync() is called but
close_sync() is not. null-ptr-deref occurs with r10bio->dev[i].repl_bio.
The following is one way to reproduce the issue.
1) create a array, wait for resync to complete, mddev->recovery_cp is set
to MaxSector.
2) recovery is woken and it is skipped. conf->have_replacement is set to
0 in init_resync(). close_sync() not called.
3) some io errors and rdev A is set to WantReplacement.
4) a new device is added and set to A's replacement.
5) recovery is woken, A have replacement, but conf->have_replacemnt is
0. r10bio->dev[i].repl_bio will not be alloced and null-ptr-deref
occurs.
Fix it by not calling init_resync() if recovery skipped.
[1] commit 7e83ccbecd ("md/raid10: Allow skipping recovery when clean arrays are assembled")
Fixes: 7e83ccbecd ("md/raid10: Allow skipping recovery when clean arrays are assembled")
Cc: stable@vger.kernel.org
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230222041000.3341651-3-linan666@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3899d94e38 upstream.
When we receive a flush command (or "barrier" in DRBD), we currently use
a REQ_OP_FLUSH with the REQ_PREFLUSH flag set.
The correct way to submit a flush bio is by using a REQ_OP_WRITE without
any data, and set the REQ_PREFLUSH flag.
Since commit b4a6bb3a67 ("block: add a sanity check for non-write
flush/fua bios"), this triggers a warning in the block layer, but this
has been broken for quite some time before that.
So use the correct set of flags to actually make the flush happen.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: stable@vger.kernel.org
Fixes: f9ff0da564 ("drbd: allow parallel flushes for multi-volume resources")
Reported-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230503121937.17232-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28a65b49eb upstream.
According to syzbot's report, mark_buffer_dirty() called from
nilfs_segctor_do_construct() outputs a warning with some patterns after
nilfs2 detects metadata corruption and degrades to read-only mode.
After such read-only degeneration, page cache data may be cleared through
nilfs_clear_dirty_page() which may also clear the uptodate flag for their
buffer heads. However, even after the degeneration, log writes are still
performed by unmount processing etc., which causes mark_buffer_dirty() to
be called for buffer heads without the "uptodate" flag and causes the
warning.
Since any writes should not be done to a read-only file system in the
first place, this fixes the warning in mark_buffer_dirty() by letting
nilfs_segctor_do_construct() abort early if in read-only mode.
This also changes the retry check of nilfs_segctor_write_out() to avoid
unnecessary log write retries if it detects -EROFS that
nilfs_segctor_do_construct() returned.
Link: https://lkml.kernel.org/r/20230427011526.13457-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+2af3bc9585be7f23f290@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=2af3bc9585be7f23f290
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7477cb976 upstream.
This patch adds support for the mute LED on the HP Pavilion Aero Laptop
13-be0xxx. The current behavior is that the LED does not turn on at any
time and does not indicate to the user whether the sound is muted.
The solution is to add a PCI quirk to properly recognize and support the
LED on this device.
This change has been tested on the device in question using modified
versions of kernels 6.0.7-6.2.12 on Arch Linux.
Signed-off-by: Caleb Harper <calebharp2005@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230503175026.6796-1-calebharp2005@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d755bd2cae upstream.
Matthew Wilcox noticed, that if ARCH_HAS_FLUSH_ON_KUNMAP is defined
(which is the case for PA-RISC), __kunmap_local() calls
kunmap_flush_on_unmap(), which may call the parisc flush functions with
a non-page-aligned address and thus the page might not be fully flushed.
This patch ensures that flush_kernel_dcache_page_asm() and
flush_kernel_dcache_page_asm() will always operate on page-aligned
addresses.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e3220ba33 upstream.
Fix the argument pointer (ap) to point to real-mode memory
instead of virtual memory.
It's interesting that this issue hasn't shown up earlier, as this could
have happened with any 64-bit PDC ROM code.
I just noticed it because I suddenly faced a HPMC while trying to execute
the 64-bit STI ROM code of an Visualize-FXe graphics card for the STI
text console.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9ea4eff4b6 ]
afs_read_dir fetches an amount of data that's based on what the inode
size is thought to be. If the file on the server is larger than what
was fetched, the code rechecks i_size and retries. If the local i_size
was not properly updated, this can lead to an endless loop of fetching
i_size from the server and noticing each time that the size is larger on
the server.
If it is known that the remote size is larger than i_size, bump up the
fetch size to that size.
Fixes: f3ddee8dc4 ("afs: Fix directory handling")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45f66fa03b ]
Fix afs_getattr() to report the server's idea of the file size of a
directory rather than the local size. The local size may differ as we edit
the local copy to avoid having to redownload it and we may end up with a
differently structured blob of a different size.
However, if the directory is discarded from the pagecache we then download
it again and the user may see the directory file size apparently change.
Fixes: 63a4681ff3 ("afs: Locally edit directory data for mkdir/create/unlink/...")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7f74e9a91 ]
If the data version returned from the server is larger than expected,
the local data is invalidated, but we may still want to note the remote
file size.
Since we're setting change_size, we have to also set data_changed
for the i_size to get updated.
Fixes: 3f4aa98181 ("afs: Fix EOF corruption")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5904de0d73 ]
The system refused to do a test_resume because it found that the
swap device has already been taken by someone else. Specifically,
the swsusp_check()->blkdev_get_by_dev(FMODE_EXCL) is supposed to
do this check.
Steps to reproduce:
dd if=/dev/zero of=/swapfile bs=$(cat /proc/meminfo |
awk '/MemTotal/ {print $2}') count=1024 conv=notrunc
mkswap /swapfile
swapon /swapfile
swap-offset /swapfile
echo 34816 > /sys/power/resume_offset
echo test_resume > /sys/power/disk
echo disk > /sys/power/state
PM: Using 3 thread(s) for compression
PM: Compressing and saving image data (293150 pages)...
PM: Image saving progress: 0%
PM: Image saving progress: 10%
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
PM: Image saving progress: 20%
PM: Image saving progress: 30%
PM: Image saving progress: 40%
PM: Image saving progress: 50%
pcieport 0000:00:02.5: pciehp: Slot(0-5): No device found
PM: Image saving progress: 60%
PM: Image saving progress: 70%
PM: Image saving progress: 80%
PM: Image saving progress: 90%
PM: Image saving done
PM: hibernation: Wrote 1172600 kbytes in 2.70 seconds (434.29 MB/s)
PM: S|
PM: hibernation: Basic memory bitmaps freed
PM: Image not found (code -16)
This is because when using the swapfile as the hibernation storage,
the block device where the swapfile is located has already been mounted
by the OS distribution(usually mounted as the rootfs). This is not
an issue for normal hibernation, because software_resume()->swsusp_check()
happens before the block device(rootfs) mount. But it is a problem for the
test_resume mode. Because when test_resume happens, the block device has
been mounted already.
Thus remove the FMODE_EXCL for test_resume mode. This would not be a
problem because in test_resume stage, the processes have already been
frozen, and the race condition described in
Commit 39fbef4b0f ("PM: hibernate: Get block device exclusively in swsusp_check()")
is unlikely to happen.
Fixes: 39fbef4b0f ("PM: hibernate: Get block device exclusively in swsusp_check()")
Reported-by: Yifan Li <yifan2.li@intel.com>
Suggested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08169a162f ]
There is need to check snapshot_test and open block device
in different mode, so as to avoid the race condition.
No functional changes intended.
Suggested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 5904de0d73 ("PM: hibernate: Do not get block device exclusively in test_resume mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b04d99788 ]
The CPR3 power resource on the Toshiba Click Mini toggles a GPIO
which is called SISP (for SIS touchscreen power?) on/off.
This CPR3 power resource is not listed in any _PR? lists, let alone
in a _PR0 list for the SIS0817 touchscreen ACPI device which needs it.
Before commit a1224f34d7 ("ACPI: PM: Check states of power resources
during initialization") this was not an issue because since nothing
referenced the CPR3 power resource its state was always
ACPI_POWER_RESOURCE_STATE_UNKNOWN and power resources with this state
get ignored by acpi_turn_off_unused_power_resources().
This clearly is a bug in the DSDT of this device. Add a DMI quirk
to make acpi_turn_off_unused_power_resources() a no-op on this
model to fix the touchscreen no longer working since kernel 5.16 .
This quirk also causes 2 other power resources to not get turned
off, but the _OFF method on these already was a no-op, so this makes
no difference for the other 2 power resources.
Fixes: a1224f34d7 ("ACPI: PM: Check states of power resources during initialization")
Reported-by: Gé Koerkamp <ge.koerkamp@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216946
Link: https://lore.kernel.org/regressions/32a14a8a-9795-4c8c-7e00-da9012f548f8@leemhuis.info/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e078180d66 ]
The "map_sz" is the number of elements in the "m" array so the >
comparison needs to be changed to >= to prevent an out of bounds
read.
Fixes: 09574cca6a ("hte: Add Tegra194 HTE kernel provider")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0484d2f80 ]
Ocelot chips (VSC7511, VSC7512, VSC7513, VSC7514) don't support bulk read
operations over SPI.
Many SPI buses have hardware that can optimize consecutive reads.
Essentially an address is written to the chip, and if the SPI controller
continues to toggle the clock, subsequent register values are reported.
This can lead to significant optimizations, because the time between
"address is written to the chip" and "chip starts to report data" can often
take a fixed amount of time.
When support for Ocelot chips were added in commit f3e893626a ("mfd:
ocelot: Add support for the vsc7512 chip via spi") it was believed that
this optimization was supported. However it is not.
Most register transactions with the Ocelot chips are not done in bulk, so
this bug could go unnoticed. The one scenario where bulk register
operations _are_ performed is when polling port statistics counters, which
was added in commit d87b1c08f3 ("net: mscc: ocelot: use bulk reads for
stats").
Things get slightly more complicated here...
A bug was introduced in commit d4c3676507 ("net: mscc: ocelot: keep
ocelot_stat_layout by reg address, not offset") that broke the optimization
of bulk reads. This means that when Ethernet support for the VSC7512 chip
was added in commit 3d7316ac81 ("net: dsa: ocelot: add external ocelot
switch control") things were actually working "as expected".
The bulk read opmtimization was discovered, and fixed in commit
6acc72a43e ("net: mscc: ocelot: fix stats region batching") and the
timing optimizations for SPI were noticed. A bulk read went from ~14ms to
~2ms. But this timing improvement came at the cost of every register
reading zero due the fact that bulk reads don't work.
The read timings increase back to 13-14ms, but that's a price worth paying
in order to receive valid data. This is verified in a DSA setup (cpsw-new
switch tied to port 0 on the VSC7512, after having been running overnight)
Rx Octets: 16222055 # Counters from CPSW switch
Tx Octets: 12034702
Net Octets: 28256757
p00_rx_octets: 12034702 # Counters from Ocelot switch
p00_rx_frames_below_65_octets: 0
p00_rx_frames_65_to_127_octets: 88188
p00_rx_frames_128_to_255_octets: 13
p00_rx_frames_256_to_511_octets: 0
p00_rx_frames_512_to_1023_octets: 0
p00_rx_frames_over_1526_octets: 3306
p00_tx_octets: 16222055
Fixes: f3e893626a ("mfd: ocelot: Add support for the vsc7512 chip via spi")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230322141130.2531256-1-colin.foster@in-advantage.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f376c47966 ]
It seems that this driver was developed based on preliminary documentation.
Report the correct names for all TQMxE39x variants, as they are used by
the released hardware revisions:
- Fix names for TQMxE39C1/C2 board IDs
- Distinguish TQMxE39M and TQMxE39S, which use the same board ID
The TQMxE39M/S are distinguished using the SAUC (Sanctioned Alternate
Uses Configuration) register of the GPIO controller. This also prepares
for the correct handling of the differences between the GPIO controllers
of our COMe and SMARC modules.
Fixes: 2f17dd34ff ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/aca9a7cb42a85181bcb456c437554d2728e708ec.1676892223.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1be1b23696 ]
The I2C_DETECT register is at IO port 0x1a7, which is outside the range
passed to devm_ioport_map() for io_base, and was only working because
there aren't actually any bounds checks for IO port accesses.
Extending the range does not seem like a good solution here, as it would
then conflict with the IO resource assigned to the I2C controller. As
this is just a one-off access during probe, use a simple inb() instead.
While we're at it, drop the unused define TQMX86_REG_I2C_INT_EN.
Fixes: 2f17dd34ff ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/e8300a30f0791afb67d79db8089fb6004855f378.1676892223.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7badd752d ]
In the past setting the pin direction called pinctrl_gpio_direction()
which uses a mutex to serialize this. That was changed to set the
direction directly in the pin controller driver, but that lost the
serialization mechanism. Since the direction of multiple pins are in
the same register you can have a race condition, something that was
in fact observed with the cec-gpio driver.
Add a new spinlock to serialize writing to the FSEL registers.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 1a4541b68e ("pinctrl-bcm2835: don't call pinctrl_gpio_direction()")
Link: https://lore.kernel.org/r/4302b66b-ca20-0f19-d2aa-ee8661118863@xs4all.nl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a251994a44 ]
The dw-edma driver stops after processing a DMA request even if a request
remains in the issued queue, which is not the expected behavior. The DMA
engine API requires continuous processing.
Add a trigger to start after one processing finished if there are requests
remain.
Fixes: e63d79d1ff ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20230411101758.438472-1-mie@igel.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a0d1740bd ]
The existing code copies the hw_params pointer and reuses it later in
.prepare, specifically to re-initialize the ALH DMA channel
information that's lost in suspend-resume cycles.
This is not needed, we can directly access the information from the
substream/rtd - as done for the HDAudio DAIs in
sound/soc/sof/intel/hda-dai.c
In addition, using the saved pointer causes the suspend-resume test
cases to fail on specific platforms, depending on which version of GCC
is used. Péter Ujfalusi and I have spent long hours to root-cause this
problem that was reported by the Intel CI first with 6.2-rc1 and again
v6.3-rc1. In the latter case we were lucky that the problem was 100%
reproducible on local test devices, and found out that adding a
dev_dbg() or adding a call to usleep_range() just before accessing the
saved pointer "fixed" the issue. With errors appearing just by
changing the compiler version or minor changes in the code generated,
clearly we have a memory management Heisenbug.
The root-cause seems to be that the hw_params pointer is not
persistent. The soc-pcm code allocates the hw_params structure on the
stack, and passes it to the BE dailink hw_params and DAIs
hw_params. Saving such a pointer and reusing it later during the
.prepare stage cannot possibly work reliably, it's broken-by-design
since v5.10. It's astonishing that the problem was not seen earlier.
This simple fix will have to be back-ported to -stable, due to changes
to avoid the use of the get/set_dmadata routines this patch will only
apply on kernels older than v6.1.
Fixes: a5a0239c27 ("soundwire: intel: reinitialize IP+DSP in .prepare(), but only when resuming")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230321022642.1426611-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0767e3910 ]
The existing 'struct sdw_cdns_dma_data' has really nothing to do with
DMAs. The information is stored in the dai->dma_data, but this is
really private data that should be stored in a different context.
Beyond the academic elegance discussion, using dma_data is a problem
for new Intel hardware where the dma_data structure is already used
for true DMA handling performed by other parts of the code.
This patch prepares a transition away from the use of dma_data, for
now with a rename-only change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221101023521.2384586-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 0a0d1740bd ("soundwire: intel: don't save hw_params for use in prepare")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b16c310115 ]
The DISP_PWM controller's default behavior is to always use register
double buffering: all reads/writes are then performed on shadow
registers instead of working registers and this becomes an issue
in case our chosen configuration in Linux is different from the
default (or from the one that was pre-applied by the bootloader).
An example of broken behavior is when the controller is configured
to use shadow registers, but this driver wants to configure it
otherwise: what happens is that the .get_state() callback is called
right after registering the pwmchip and checks whether the PWM is
enabled by reading the DISP_PWM_EN register;
At this point, if shadow registers are enabled but their content
was not committed before booting Linux, we are *not* reading the
current PWM enablement status, leading to the kernel knowing that
the hardware is actually enabled when, in reality, it's not.
The aforementioned issue emerged since this driver was fixed with
commit 0b5ef3429d ("pwm: mtk-disp: Fix the parameters calculated
by the enabled flag of disp_pwm") making it to read the enablement
status from the right register.
Configure the controller in the .get_state() callback to avoid
this desync issue and get the backlight properly working again.
Fixes: 3f2b167349 ("pwm: mtk-disp: Implement atomic API .get_state()")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1087c29e9 ]
Commit 96f524105b ("leds: tca6507: use fwnode API instead of OF")
changed to fwnode API but did not take into account that a missing property
"linux,default-trigger" now seems to return an error and as a side effect
sets value to -1. This seems to be different from of_get_property() which
always returned NULL in any case of error.
Neglecting this side-effect leads to
[ 11.201965] Unable to handle kernel paging request at virtual address ffffffff when read
in the strcmp() of led_trigger_set_default() if there is no led-trigger
defined in the DTS.
I don't know if this was recently introduced somewhere in the fwnode lib
or if the effect was missed in initial testing. Anyways it seems to be a
bug to ignore the error return value of an optional value here in the
driver.
Fixes: 96f524105b ("leds: tca6507: use fwnode API instead of OF")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/cbae7617db83113de726fcc423a805ebaa1bfca6.1680433978.git.hns@goldelico.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a61079efc8 ]
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
Fixes: 3fce8e1eb9 ("leds: TI LMU: Add common code for TI LMU devices")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230226053953.4681-5-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
