* kvm-arm64/vmid-allocator:
: .
: VMID allocation rewrite from Shameerali Kolothum Thodi, paving the
: way for pinned VMIDs and SVA.
: .
KVM: arm64: Make active_vmids invalid on vCPU schedule out
KVM: arm64: Align the VMID allocation with the arm64 ASID
KVM: arm64: Make VMID bits accessible outside of allocator
KVM: arm64: Introduce a new VMID allocator for KVM
Signed-off-by: Marc Zyngier <maz@kernel.org>
At the moment, the VMID algorithm will send an SGI to all the
CPUs to force an exit and then broadcast a full TLB flush and
I-Cache invalidation.
This patch uses the new VMID allocator. The benefits are:
- Aligns with arm64 ASID algorithm.
- CPUs are not forced to exit at roll-over. Instead,
the VMID will be marked reserved and context invalidation
is broadcasted. This will reduce the IPIs traffic.
- More flexible to add support for pinned KVM VMIDs in
the future.
With the new algo, the code is now adapted:
- The call to update_vmid() will be done with preemption
disabled as the new algo requires to store information
per-CPU.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211122121844.867-4-shameerali.kolothum.thodi@huawei.com
A new VMID allocator for arm64 KVM use. This is based on
arm64 ASID allocator algorithm.
One major deviation from the ASID allocator is the way we
flush the context. Unlike ASID allocator, we expect less
frequent rollover in the case of VMIDs. Hence, instead of
marking the CPU as flush_pending and issuing a local context
invalidation on the next context switch, we broadcast TLB
flush + I-cache invalidation over the inner shareable domain
on rollover.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211122121844.867-2-shameerali.kolothum.thodi@huawei.com
* kvm-arm64/fpsimd-doc:
: .
: FPSIMD documentation update, courtesy of Mark Brown
: .
arm64/fpsimd: Clarify the purpose of using last in fpsimd_save()
KVM: arm64: Add some more comments in kvm_hyp_handle_fpsimd()
KVM: arm64: Add comments for context flush and sync callbacks
Signed-off-by: Marc Zyngier <maz@kernel.org>
When saving the floating point context in fpsimd_save() we always reference
the state using last-> rather than using current->. Looking at the FP code
in isolation the reason for this is not entirely obvious, it's done because
when KVM is running it will bind the guest context and rely on the host
writing out the guest state on context switch away from the guest.
There's a slight trick here in that KVM still uses TIF_FOREIGN_FPSTATE and
TIF_SVE to communicate what needs to be saved, it maintains those flags
and restores them when it is done running the guest so that the normal
restore paths function when we return back to userspace.
Add a comment to explain this to help future readers work out what's going
on a bit faster.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220124161115.115200-1-broonie@kernel.org
* kvm-arm64/mmu-rwlock:
: .
: MMU locking optimisations from Jing Zhang, allowing permission
: relaxations to occur in parallel.
: .
KVM: selftests: Add vgic initialization for dirty log perf test for ARM
KVM: arm64: Add fast path to handle permission relaxation during dirty logging
KVM: arm64: Use read/write spin lock for MMU protection
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/oslock:
: .
: Debug OS-Lock emulation courtesy of Oliver Upton. From the cover letter:
:
: "KVM does not implement the debug architecture to the letter of the
: specification. One such issue is the fact that KVM treats the OS Lock as
: RAZ/WI, rather than emulating its behavior on hardware. This series adds
: emulation support for the OS Lock to KVM. Emulation is warranted as the
: OS Lock affects debug exceptions taken from all ELs, and is not limited
: to only the context of the guest."
: .
selftests: KVM: Test OS lock behavior
selftests: KVM: Add OSLSR_EL1 to the list of blessed regs
KVM: arm64: Emulate the OS Lock
KVM: arm64: Allow guest to set the OSLK bit
KVM: arm64: Stash OSLSR_EL1 in the cpu context
KVM: arm64: Correctly treat writes to OSLSR_EL1 as undefined
Signed-off-by: Marc Zyngier <maz@kernel.org>
KVM now correctly handles the OS Lock for its guests. When set, KVM
blocks all debug exceptions originating from the guest. Add test cases
to the debug-exceptions test to assert that software breakpoint,
hardware breakpoint, watchpoint, and single-step exceptions are in fact
blocked.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220203174159.2887882-7-oupton@google.com
The OS lock blocks all debug exceptions at every EL. To date, KVM has
not implemented the OS lock for its guests, despite the fact that it is
mandatory per the architecture. Simple context switching between the
guest and host is not appropriate, as its effects are not constrained to
the guest context.
Emulate the OS Lock by clearing MDE and SS in MDSCR_EL1, thereby
blocking all but software breakpoint instructions.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220203174159.2887882-5-oupton@google.com
An upcoming change to KVM will emulate the OS Lock from the PoV of the
guest. Add OSLSR_EL1 to the cpu context and handle reads using the
stored value. Define some mnemonics for for handling the OSLM field and
use them to make the reset value of OSLSR_EL1 more readable.
Wire up a custom handler for writes from userspace and prevent any of
the invariant bits from changing. Note that the OSLK bit is not
invariant and will be made writable by the aforementioned change.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220203174159.2887882-3-oupton@google.com
Writes to OSLSR_EL1 are UNDEFINED and should never trap from EL1 to
EL2, but the kvm trap handler for OSLSR_EL1 handles writes via
ignore_write(). This is confusing to readers of code, but should have
no functional impact.
For clarity, use write_to_read_only() rather than ignore_write(). If a
trap is unexpectedly taken to EL2 in violation of the architecture, this
will WARN_ONCE() and inject an undef into the guest.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
[adopted Mark's changelog suggestion, thanks!]
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220203174159.2887882-2-oupton@google.com
Pull ext4 fixes from Ted Ts'o:
"Various bug fixes for ext4 fast commit and inline data handling.
Also fix regression introduced as part of moving to the new mount API"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fs/ext4: fix comments mentioning i_mutex
ext4: fix incorrect type issue during replay_del_range
jbd2: fix kernel-doc descriptions for jbd2_journal_shrink_{scan,count}()
ext4: fix potential NULL pointer dereference in ext4_fill_super()
jbd2: refactor wait logic for transaction updates into a common function
jbd2: cleanup unused functions declarations from jbd2.h
ext4: fix error handling in ext4_fc_record_modified_inode()
ext4: remove redundant max inline_size check in ext4_da_write_inline_data_begin()
ext4: fix error handling in ext4_restore_inline_data()
ext4: fast commit may miss file actions
ext4: fast commit may not fallback for ineligible commit
ext4: modify the logic of ext4_mb_new_blocks_simple
ext4: prevent used blocks from being allocated during fast commit replay
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix display of grouped aliased events in 'perf stat'.
- Add missing branch_sample_type to perf_event_attr__fprintf().
- Apply correct label to user/kernel symbols in branch mode.
- Fix 'perf ftrace' system_wide tracing, it has to be set before
creating the maps.
- Return error if procfs isn't mounted for PID namespaces when
synthesizing records for pre-existing processes.
- Set error stream of objdump process for 'perf annotate' TUI, to avoid
garbling the screen.
- Add missing arm64 support to perf_mmap__read_self(), the kernel part
got into 5.17.
- Check for NULL pointer before dereference writing debug info about a
sample.
- Update UAPI copies for asound, perf_event, prctl and kvm headers.
- Fix a typo in bpf_counter_cgroup.c.
* tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf ftrace: system_wide collection is not effective by default
libperf: Add arm64 support to perf_mmap__read_self()
tools include UAPI: Sync sound/asound.h copy with the kernel sources
perf stat: Fix display of grouped aliased events
perf tools: Apply correct label to user/kernel symbols in branch mode
perf bpf: Fix a typo in bpf_counter_cgroup.c
perf synthetic-events: Return error if procfs isn't mounted for PID namespaces
perf session: Check for NULL pointer before dereference
perf annotate: Set error stream of objdump process for TUI
perf tools: Add missing branch_sample_type to perf_event_attr__fprintf()
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf beauty: Make the prctl arg regexp more strict to cope with PR_SET_VMA
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
Pull perf fixes from Borislav Petkov:
- Intel/PT: filters could crash the kernel
- Intel: default disable the PMU for SMM, some new-ish EFI firmware has
started using CPL3 and the PMU CPL filters don't discriminate against
SMM, meaning that CPL3 (userspace only) events now also count EFI/SMM
cycles.
- Fixup for perf_event_attr::sig_data
* tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix crash with stop filters in single-range mode
perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures
selftests/perf_events: Test modification of perf_event_attr::sig_data
perf: Copy perf_event_attr::sig_data on modification
x86/perf: Default set FREEZE_ON_SMI for all
Pull objtool fix from Borislav Petkov:
"Fix a potential truncated string warning triggered by gcc12"
* tag 'objtool_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix truncated string warning
Pull irq fix from Borislav Petkov:
"Remove a bogus warning introduced by the recent PCI MSI irq affinity
overhaul"
* tag 'irq_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Remove bogus warning in pci_irq_get_affinity()
Pull EDAC fixes from Borislav Petkov:
"Fix altera and xgene EDAC drivers to propagate the correct error code
from platform_get_irq() so that deferred probing still works"
* tag 'edac_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/xgene: Fix deferred probing
EDAC/altera: Fix deferred probing
Picking the changes from:
06feec6005 ("ASoC: hdmi-codec: Fix OOB memory accesses")
Which entails no changes in the tooling side as it doesn't introduce new
SNDRV_PCM_IOCTL_ ioctls.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/lkml/Yf+6OT+2eMrYDEeX@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For perf recording, it retrieves process info by iterating nodes in proc
fs. If we run perf in a non-root PID namespace with command:
# unshare --fork --pid perf record -e cycles -a -- test_program
... in this case, unshare command creates a child PID namespace and
launches perf tool in it, but the issue is the proc fs is not mounted
for the non-root PID namespace, this leads to the perf tool gathering
process info from its parent PID namespace.
We can use below command to observe the process nodes under proc fs:
# unshare --pid --fork ls /proc
1 137 1968 2128 3 342 48 62 78 crypto kcore net uptime
10 138 2 2142 30 35 49 63 8 devices keys pagetypeinfo version
11 139 20 2143 304 36 50 64 82 device-tree key-users partitions vmallocinfo
12 14 2011 22 305 37 51 65 83 diskstats kmsg self vmstat
128 140 2038 23 307 39 52 656 84 driver kpagecgroup slabinfo zoneinfo
129 15 2074 24 309 4 53 67 9 execdomains kpagecount softirqs
13 16 2094 241 31 40 54 68 asound fb kpageflags stat
130 164 2096 242 310 41 55 69 buddyinfo filesystems loadavg swaps
131 17 2098 25 317 42 56 70 bus fs locks sys
132 175 21 26 32 43 57 71 cgroups interrupts meminfo sysrq-trigger
133 179 2102 263 329 44 58 75 cmdline iomem misc sysvipc
134 1875 2103 27 330 45 59 76 config.gz ioports modules thread-self
135 19 2117 29 333 46 6 77 consoles irq mounts timer_list
136 1941 2121 298 34 47 60 773 cpuinfo kallsyms mtd tty
So it shows many existed tasks, since unshared command has not mounted
the proc fs for the new created PID namespace, it still accesses the
proc fs of the root PID namespace. This leads to two prominent issues:
- Firstly, PID values are mismatched between thread info and samples.
The gathered thread info are coming from the proc fs of the root PID
namespace, but samples record its PID from the child PID namespace.
- The second issue is profiled program 'test_program' returns its forked
PID number from the child PID namespace, perf tool wrongly uses this
PID number to retrieve the process info via the proc fs of the root
PID namespace.
To avoid issues, we need to mount proc fs for the child PID namespace
with the option '--mount-proc' when use unshare command:
# unshare --fork --pid --mount-proc perf record -e cycles -a -- test_program
Conversely, when the proc fs of the root PID namespace is used by child
namespace, perf tool can detect the multiple PID levels and
nsinfo__is_in_root_namespace() returns false, this patch reports error
for this case:
# unshare --fork --pid perf record -e cycles -a -- test_program
Couldn't synthesize bpf events.
Perf runs in non-root PID namespace but it tries to gather process info from its parent PID namespace.
Please mount the proc file system properly, e.g. add the option '--mount-proc' for unshare command.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20211224124014.2492751-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
f6c6804c43 ("kvm: Move KVM_GET_XSAVE2 IOCTL definition at the end of kvm.h")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/Yf+4k5Fs5Q3HdSG9@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To check if more kernel API sync is needed and also to see if the perf
build tests continue to pass.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull xen fixes from Juergen Gross:
- documentation fixes related to Xen
- enable x2apic mode when available when running as hardware
virtualized guest under Xen
- cleanup and fix a corner case of vcpu enumeration when running a
paravirtualized Xen guest
* tag 'for-linus-5.17a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/Xen: streamline (and fix) PV CPU enumeration
xen: update missing ioctl magic numers documentation
Improve docs for IOCTL_GNTDEV_MAP_GRANT_REF
xen: xenbus_dev.h: delete incorrect file name
xen/x2apic: enable x2apic mode when supported for HVM
Pull kvm fixes from Paolo Bonzini:
"ARM:
- A couple of fixes when handling an exception while a SError has
been delivered
- Workaround for Cortex-A510's single-step erratum
RISC-V:
- Make CY, TM, and IR counters accessible in VU mode
- Fix SBI implementation version
x86:
- Report deprecation of x87 features in supported CPUID
- Preparation for fixing an interrupt delivery race on AMD hardware
- Sparse fix
All except POWER and s390:
- Rework guest entry code to correctly mark noinstr areas and fix
vtime' accounting (for x86, this was already mostly correct but not
entirely; for ARM, MIPS and RISC-V it wasn't)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Use ERR_PTR_USR() to return -EFAULT as a __user pointer
KVM: x86: Report deprecated x87 features in supported CPUID
KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errata
KVM: arm64: Stop handle_exit() from handling HVC twice when an SError occurs
KVM: arm64: Avoid consuming a stale esr value when SError occur
RISC-V: KVM: Fix SBI implementation version
RISC-V: KVM: make CY, TM, and IR counters accessible in VU mode
kvm/riscv: rework guest entry logic
kvm/arm64: rework guest entry logic
kvm/x86: rework guest entry logic
kvm/mips: rework guest entry logic
kvm: add guest_state_{enter,exit}_irqoff()
KVM: x86: Move delivery of non-APICv interrupt into vendor code
kvm: Move KVM_GET_XSAVE2 IOCTL definition at the end of kvm.h
Pull xfs fixes from Darrick Wong:
"I was auditing operations in XFS that clear file privileges, and
realized that XFS' fallocate implementation drops suid/sgid but
doesn't clear file capabilities the same way that file writes and
reflink do.
There are VFS helpers that do it correctly, so refactor XFS to use
them. I also noticed that we weren't flushing the log at the correct
point in the fallocate operation, so that's fixed too.
Summary:
- Fix fallocate so that it drops all file privileges when files are
modified instead of open-coding that incompletely.
- Fix fallocate to flush the log if the caller wanted synchronous
file updates"
* tag 'xfs-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: ensure log flush at the end of a synchronous fallocate call
xfs: move xfs_update_prealloc_flags() to xfs_pnfs.c
xfs: set prealloc flag in xfs_alloc_file_space()
xfs: fallocate() should call file_modified()
xfs: remove XFS_PREALLOC_SYNC
xfs: reject crazy array sizes being fed to XFS_IOC_GETBMAP*
Pull vfs fixes from Darrick Wong:
"I was auditing the sync_fs code paths recently and noticed that most
callers of ->sync_fs ignore its return value (and many implementations
never return nonzero even if the fs is broken!), which means that
internal fs errors and corruption are not passed up to userspace
callers of syncfs(2) or FIFREEZE. Hence fixing the common code and
XFS, and I'll start working on the ext4/btrfs folks if this is merged.
Summary:
- Fix a bug where callers of ->sync_fs (e.g. sync_filesystem and
syncfs(2)) ignore the return value.
- Fix a bug where callers of sync_filesystem (e.g. fs freeze) ignore
the return value.
- Fix a bug in XFS where xfs_fs_sync_fs never passed back error
returns"
* tag 'vfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: return errors in xfs_fs_sync_fs
quota: make dquot_quota_sync return errors from ->sync_fs
vfs: make sync_filesystem return errors from ->sync_fs
vfs: make freeze_super abort when sync_filesystem returns error
Pull iomap fix from Darrick Wong:
"A single bugfix for iomap.
The fix should eliminate occasional complaints about stall warnings
when a lot of writeback IO completes all at once and we have to then
go clearing status on a large number of folios.
Summary:
- Limit the length of ioend chains in writeback so that we don't trip
the softlockup watchdog and to limit long tail latency on clearing
PageWriteback"
* tag 'iomap-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs, iomap: limit individual ioend chain lengths in writeback
KVM/arm64 fixes for 5.17, take #2
- A couple of fixes when handling an exception while a SError has been
delivered
- Workaround for Cortex-A510's single-step[ erratum
Pull rdma fixes from Jason Gunthorpe:
"Some medium sized bugs in the various drivers. A couple are more
recent regressions:
- Fix two panics in hfi1 and two allocation problems
- Send the IGMP to the correct address in cma
- Squash a syzkaller bug related to races reading the multicast list
- Memory leak in siw and cm
- Fix a corner case spec compliance for HFI/QIB
- Correct the implementation of fences in siw
- Error unwind bug in mlx4"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx4: Don't continue event handler after memory allocation failure
RDMA/siw: Fix broken RDMA Read Fence/Resume logic.
IB/rdmavt: Validate remote_addr during loopback atomic tests
IB/cm: Release previously acquired reference counter in the cm_id_priv
RDMA/siw: Fix refcounting leak in siw_create_qp()
RDMA/ucma: Protect mc during concurrent multicast leaves
RDMA/cma: Use correct address when leaving multicast group
IB/hfi1: Fix tstats alloc and dealloc
IB/hfi1: Fix AIP early init panic
IB/hfi1: Fix alloc failure with larger txqueuelen
IB/hfi1: Fix panic with larger ipoib send_queue_size
Pull SCSI fixes from James Bottomley:
"Seven fixes, six of which are fairly obvious driver fixes.
The one core change to the device budget depth is to try to ensure
that if the default depth is large (which can produce quite a sizeable
bitmap allocation per device), we give back the memory we don't need
if there's a queue size reduction in slave_configure (which happens to
a lot of devices)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hisi_sas: Fix setting of hisi_sas_slot.is_internal
scsi: pm8001: Fix use-after-free for aborted SSP/STP sas_task
scsi: pm8001: Fix use-after-free for aborted TMF sas_task
scsi: pm8001: Fix warning for undescribed param in process_one_iomb()
scsi: core: Reallocate device's budget map on queue depth change
scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe
scsi: pm80xx: Fix double completion for SATA devices
Pull pci fixes from Bjorn Helgaas:
- Restructure j721e_pcie_probe() so we don't dereference a NULL pointer
(Bjorn Helgaas)
- Add a kirin_pcie_data struct to identify different Kirin variants to
fix probe failure for controllers with an internal PHY (Bjorn
Helgaas)
* tag 'pci-v5.17-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: kirin: Add dev struct for of_device_get_match_data()
PCI: j721e: Initialize pcie->cdns_pcie before using it
Bean reported that a622435fbe ("PCI: kirin: Prefer
of_device_get_match_data()") broke kirin_pcie_probe() because it assumed
match data of 0 was a failure when in fact, it meant the match data was
"(void *)PCIE_KIRIN_INTERNAL_PHY".
Therefore, probing of "hisilicon,kirin960-pcie" devices failed with -EINVAL
and an "OF data missing" message.
Add a struct kirin_pcie_data to encode the PHY type. Then the result of
of_device_get_match_data() should always be a non-NULL pointer to a struct
kirin_pcie_data that contains the PHY type.
Fixes: a622435fbe ("PCI: kirin: Prefer of_device_get_match_data()")
Link: https://lore.kernel.org/r/20220202162659.GA12603@bhelgaas
Link: https://lore.kernel.org/r/20220201215941.1203155-1-huobean@gmail.com
Reported-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Pull btrfs fixes from David Sterba:
"A few fixes and error handling improvements:
- fix deadlock between quota disable and qgroup rescan worker
- fix use-after-free after failure to create a snapshot
- skip warning on unmount after log cleanup failure
- don't start transaction for scrub if the fs is mounted read-only
- tree checker verifies item sizes"
* tag 'for-5.17-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: skip reserved bytes warning on unmount after log cleanup failure
btrfs: fix use of uninitialized variable at rm device ioctl
btrfs: fix use-after-free after failure to create a snapshot
btrfs: tree-checker: check item_size for dev_item
btrfs: tree-checker: check item_size for inode_item
btrfs: fix deadlock between quota disable and qgroup rescan worker
btrfs: don't start transaction for scrub if the fs is mounted read-only
