[ Upstream commit 87ea95808d ]
Display drivers so far need to have a lot of boilerplate to first
retrieve either the panel or bridge that they are connected to using
drm_of_find_panel_or_bridge(), and then either deal with each with ad-hoc
functions or create a drm panel bridge through drm_panel_bridge_add.
In order to reduce the boilerplate and hopefully create a path of least
resistance towards using the DRM panel bridge layer, let's create the
function devm_drm_of_get_bridge() to reduce that boilerplate.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910130941.1740182-2-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 517db1ab15 ]
There is little harm in ignoring fractional coordinates
(they just get truncated).
Without this:
modetest -M vc4 -F tiles,gradient -s 32:1920x1080-60 -P89@74:1920x1080*.1.1@XR24
is rejected. We have the same issue in Kodi when trying to
use zoom options on video.
Note: even if all coordinates are fully integer. e.g.
src:[0,0,1920,1080] dest:[-10,-10,1940,1100]
it will still get rejected as drm_atomic_helper_check_plane_state
uses drm_rect_clip_scaled which transforms this to fractional src coords
Fixes: 21af94cf1a ("drm/vc4: Add support for scaling of display planes.")
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Link: https://lore.kernel.org/r/20220613144800.326124-5-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0b212ec9d ]
video_device_alloc() allocates memory for vdev,
when video_register_device() fails, it doesn't release the memory and
leads to memory leak, call video_device_release() to fix this.
Fixes: 704a84ccdb ("[media] media: Support Intersil/Techwell TW686x-based video capture cards")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b304046a8 ]
In function mxc_jpeg_probe(), when devm_clk_get() fail, the return value
will be unexpected, and it should be the devm_clk_get's error code.
Fixes: 4c2e5156d9 ("media: imx-jpeg: Add pm-runtime support for imx-jpeg")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jian Zhang <zhangjian210@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4de27a9b1 ]
If the last buffer was dequeued from the capture queue,
signal userspace. DQBUF(CAPTURE) will return -EPIPE.
But if output queue is empty and capture queue is empty,
v4l2_m2m_poll_for_data will return EPOLLERR,
This is very easy to happen in drain.
When last_buffer_dequeued is set, we shouldn't return EPOLLERR,
but return EPOLLIN | EPOLLRDNORM.
Fixes: 1698a7f151 ("media: v4l2-mem2mem: simplify poll logic")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 359c27c6dd ]
Error return values are supposed to be negative in hdpvr_read. Most
error returns are currently handled via an unsigned integer "ret". When
setting a negative error value to "ret", the value actually becomes a
large positive value, because "ret" is unsigned. Later on, the "ret"
value is returned. But as ssize_t is a 64-bit signed number, the error
return value stays a large positive integer instead of a negative
integer. This can cause an error value to be interpreted as the read
size, which can cause a buffer overread for applications relying on the
returned size.
Fixes: 9aba42efe8 ("V4L/DVB (11096): V4L2 Driver for the Hauppauge HD PVR usb capture device")
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22a2bc88c1 ]
The interrupt STMBUF_HALF may be triggered after frame done.
It may led to system hang if driver try to access the register after
power off.
Disable the slot interrupt when frame done.
Fixes: 2db16c6ed7 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Tested-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b05ece0c9 ]
On shutdown, each CCP device instance performs shutdown processing.
However, __sev_platform_shutdown_locked() uses the controlling psp
structure to obtain the pointer to the sev_device structure. However,
during driver initialization, it is possible that an error can be received
from the firmware that results in the sev_data pointer being cleared from
the controlling psp structure. The __sev_platform_shutdown_locked()
function does not check for this situation and will segfault.
While not common, this scenario should be accounted for. Add a check for a
NULL sev_device structure before attempting to use it.
Fixes: 5441a07a12 ("crypto: ccp - shutdown SEV firmware on kexec")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3002153a91 ]
The RCU priority boosting can fail in two situations:
1) If (nr_cpus= > maxcpus=), which means if the total number of CPUs
is higher than those brought online at boot, then torture_onoff() may
later bring up CPUs that weren't online on boot. Now since rcutorture
initialization only boosts the ksoftirqds of the CPUs that have been
set online on boot, the CPUs later set online by torture_onoff won't
benefit from the boost, making RCU priority boosting fail.
2) The ksoftirqd kthreads are boosted after the creation of
rcu_torture_boost() kthreads, which opens a window large enough for these
rcu_torture_boost() kthreads to wait (despite running at FIFO priority)
for ksoftirqds that are still running at SCHED_NORMAL priority.
The issues can trigger for example with:
./kvm.sh --configs TREE01 --kconfig "CONFIG_RCU_BOOST=y"
[ 34.968561] rcu-torture: !!!
[ 34.968627] ------------[ cut here ]------------
[ 35.014054] WARNING: CPU: 4 PID: 114 at kernel/rcu/rcutorture.c:1979 rcu_torture_stats_print+0x5ad/0x610
[ 35.052043] Modules linked in:
[ 35.069138] CPU: 4 PID: 114 Comm: rcu_torture_sta Not tainted 5.18.0-rc1 #1
[ 35.096424] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014
[ 35.154570] RIP: 0010:rcu_torture_stats_print+0x5ad/0x610
[ 35.198527] Code: 63 1b 02 00 74 02 0f 0b 48 83 3d 35 63 1b 02 00 74 02 0f 0b 48 83 3d 21 63 1b 02 00 74 02 0f 0b 48 83 3d 0d 63 1b 02 00 74 02 <0f> 0b 83 eb 01 0f 8e ba fc ff ff 0f 0b e9 b3 fc ff f82
[ 37.251049] RSP: 0000:ffffa92a0050bdf8 EFLAGS: 00010202
[ 37.277320] rcu: De-offloading 8
[ 37.290367] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000001
[ 37.290387] RDX: 0000000000000000 RSI: 00000000ffffbfff RDI: 00000000ffffffff
[ 37.290398] RBP: 000000000000007b R08: 0000000000000000 R09: c0000000ffffbfff
[ 37.290407] R10: 000000000000002a R11: ffffa92a0050bc18 R12: ffffa92a0050be20
[ 37.290417] R13: ffffa92a0050be78 R14: 0000000000000000 R15: 000000000001bea0
[ 37.290427] FS: 0000000000000000(0000) GS:ffff96045eb00000(0000) knlGS:0000000000000000
[ 37.290448] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 37.290460] CR2: 0000000000000000 CR3: 000000001dc0c000 CR4: 00000000000006e0
[ 37.290470] Call Trace:
[ 37.295049] <TASK>
[ 37.295065] ? preempt_count_add+0x63/0x90
[ 37.295095] ? _raw_spin_lock_irqsave+0x12/0x40
[ 37.295125] ? rcu_torture_stats_print+0x610/0x610
[ 37.295143] rcu_torture_stats+0x29/0x70
[ 37.295160] kthread+0xe3/0x110
[ 37.295176] ? kthread_complete_and_exit+0x20/0x20
[ 37.295193] ret_from_fork+0x22/0x30
[ 37.295218] </TASK>
Fix this with boosting the ksoftirqds kthreads from the boosting
hotplug callback itself and before the boosting kthreads are created.
Fixes: ea6d962e80 ("rcutorture: Judge RCU priority boosting on grace periods, not callbacks")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd13fe16db ]
Currently, in CONFIG_RCU_BOOST kernels, if the rcu_torture_init()
function's call to cpuhp_setup_state() fails, rcu_torture_cleanup()
gamely passes nonsense to cpuhp_remove_state(). This results in
strange and misleading splats. This commit therefore ensures that if
the rcu_torture_init() function's call to cpuhp_setup_state() fails,
rcu_torture_cleanup() avoids invoking cpuhp_remove_state().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efeff6b39b ]
When running rcutorture as a module, any rcu_torture_init() issues will be
reflected in the error code from modprobe or insmod, as the case may be.
However, these error codes are not available when running rcutorture
built-in, for example, when using the kvm.sh script. This commit
therefore adds WARN_ON_ONCE() to allow distinguishing rcu_torture_init()
errors when running rcutorture built-in.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8eb8e6f71 ]
As a result of the execution of the inner while loop, the value
of 'idx' can be equal to LINK_QUAL_MAX_RETRY_NUM. However, this
is not checked after the loop and 'idx' is used to write the
LINK_QUAL_MAX_RETRY_NUM size array 'lq_cmd->rs_table[idx]' below
in the outer loop.
The fix is to check the new value of 'idx' inside the nested loop,
and break both loops if index equals the size. Checking it at the
start is now pointless, so let's remove it.
Detected using the static analysis tool - Svace.
Fixes: be663ab670 ("iwlwifi: split the drivers for agn and legacy devices 3945/4965")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220608171614.28891-1-aleksei.kodanev@bell-sw.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4911c5acf9 ]
v4l2 m2m has supplied some helper function to handle drain,
so the driver can use the helper function directly.
Fixes: d8ebe298d0 ("media: imx-jpeg: Set V4L2_BUF_FLAG_LAST at eos")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e7aa76cdb ]
The hardware can support any image size WxH,
with arbitrary W (image width) and H (image height) dimensions.
Align upwards buffer size for both encoder and decoder.
and leave the picture resolution unchanged.
For decoder, the risk of memory out of bounds can be avoided.
For both encoder and decoder, the driver will lift the limitation of
resolution alignment.
For example, the decoder can support jpeg whose resolution is 227x149
the encoder can support nv12 1080P, won't change it to 1920x1072.
Fixes: 2db16c6ed7 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4e1fb8643 ]
To support dynamic resolution change,
driver should meet the following conditions:
1. the previous pictures are all decoded before source change event.
2. prevent decoding new resolution pictures with incorrect capture
buffer, until user handle source change event and setup capture.
3. report correct fmt and resolution during source change.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bec0a3a673 ]
The decoder will save the precision that was detected from jpeg header
and use it later, when choosing the pixel format and also calculate
bytesperline according to precision.
The 12bit jpeg is not supported yet,
but driver shouldn't led to serious problem if user enqueue a 12 bit jpeg.
And the 12bit jpeg is supported by hardware, driver may support it later.
[hverkuil: document the new precision field]
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 784a1883cf ]
V4L2_PIX_FMT_NV12 requires num_planes equals to 1,
V4L2_PIX_FMT_NV12M requires num_planes equals to 2.
and mxc-jpeg supports 2 planes for nv12,
so we should use 4L2_PIX_FMT_NV12M instead of V4L2_PIX_FMT_NV12,
otherwise it will confuses gstreamer and prevent encoding and decoding.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c2e5156d9 ]
Save some power by disabling/enabling the jpeg clocks with
every stream stop/start.
Do not use DL_FLAG_RPM_ACTIVE in mxc_jpeg_attach_pm_domains,
to ensure power domains are off after probe.
Signed-off-by: Mirela Rabulea <mirela.rabulea@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6285cdea19 ]
There is a hardware bug that it will load
the first 128 bytes of configuration data twice,
it will led to some configure error.
so shift the configuration data 128 bytes,
and make the first 128 bytes all zero,
then hardware will load the 128 zero twice,
and ignore them as garbage.
then the configuration data can be loaded correctly
Fixes: 2db16c6ed7 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a601f89e8 ]
the register CAST_NOMFRSIZE_LO should be equal to CAST_STATUS16
the register CAST_NOMFRSIZE_HI should be equal to CAST_STATUS17
the register CAST_OFBSIZE_LO should be equal to CAST_STATUS18
the register CAST_OFBSIZE_HI should be equal to CAST_STATUS19
Fixes: 2db16c6ed7 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb730334e0 ]
We got the following warning when booting the kernel:
[ 3.243674] INFO: trying to register non-static key.
[ 3.243922] The code is fine but needs lockdep annotation, or maybe
[ 3.244230] you didn't initialize this object before use?
[ 3.245642] Call Trace:
[ 3.247836] lock_acquire+0xff/0x2d0
[ 3.248727] tw686x_audio_irq+0x1a5/0xcc0 [tw686x]
[ 3.249211] tw686x_irq+0x1f9/0x480 [tw686x]
The lock 'vc->qlock' will be initialized in tw686x_video_init(), but the
driver registers the irq before calling the tw686x_video_init(), and we
got the warning.
Fix this by registering the irq at the end of probe
Fixes: 704a84ccdb ("[media] media: Support Intersil/Techwell TW686x-based video capture cards")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4c72c06c3 ]
Free the adap structure only after we are done using it.
This patch just moves the put_device() down a bit to avoid the
use after free.
Fixes: 611e12ea0f ("i2c: core: manage i2c bus device refcount in i2c_[get|put]_adapter")
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
[wsa: added comment to the code, added Fixes tag]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec30c10939 ]
This patch is similar to 7e193a42c3 ("can: netlink: allow
configuring of fixed bit rates without need for do_set_bittiming
callback") but for data bit rates instead of bit rates.
Usually CAN devices support configurable data bit rates. The limits
are defined by struct can_priv::data_bittiming_const. Another way is
to implement the struct can_priv::do_set_data_bittiming callback.
If the bit rate is configured via netlink, the can_changelink()
function checks that either can_priv::data_bittiming_const or struct
can_priv::do_set_data_bittiming is implemented.
In commit 431af77925 ("can: dev: add CAN interface API for fixed
bitrates") an API for configuring bit rates on CAN interfaces that
only support fixed bit rates was added. The supported bit rates are
defined by struct can_priv::bitrate_const.
However the above mentioned commit forgot to add the struct
can_priv::data_bitrate_const to the check in can_changelink().
In order to avoid to implement a no-op can_priv::do_set_data_bittiming
callback on devices with fixed data bit rates, extend the check in
can_changelink() accordingly.
Link: https://lore.kernel.org/all/20220613143633.4151884-1-mkl@pengutronix.de
Fixes: 431af77925 ("can: dev: add CAN interface API for fixed bitrates")
Acked-by: Max Staudt <max@enpas.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e193a42c3 ]
Usually CAN devices support configurable bit rates. The limits are
defined by struct can_priv::bittiming_const. Another way is to
implement the struct can_priv::do_set_bittiming callback.
If the bit rate is configured via netlink, the can_changelink()
function checks that either can_priv::bittiming_const or struct
can_priv::do_set_bittiming is implemented.
In commit 431af77925 ("can: dev: add CAN interface API for fixed
bitrates") an API for configuring bit rates on CAN interfaces that
only support fixed bit rates was added. The supported bit rates are
defined by struct can_priv::bitrate_const.
However the above mentioned commit forgot to add the struct
can_priv::bitrate_const to the check in can_changelink().
In order to avoid to implement a no-op can_priv::do_set_bittiming
callback on devices with fixed bit rates, extend the check in
can_changelink() accordingly.
Link: https://lore.kernel.org/all/20220611144248.3924903-1-mkl@pengutronix.de
Fixes: 431af77925 ("can: dev: add CAN interface API for fixed bitrates")
Reported-by: Max Staudt <max@enpas.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c80b038d2 ]
If sk->sk_forward_alloc is 150000, and we need to schedule 150001 bytes,
we want to allocate 1 byte more (rounded up to one page),
instead of 150001 :/
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8eec4563f1 ]
Instead of allocate memory on each requests, it is easier to
pre-allocate buffers.
This made error path easier.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cc4853e47 ]
Commit 680532c50b ("drm: adv7511: Add support for
i2c_new_secondary_device") allows a device tree node to override
the default addresses of the secondary i2c devices. This is useful
for solving address conflicts on the i2c bus.
In adv7511_init_cec_regmap() the new i2c address of cec device is
read from device tree and immediately accessed, well before it is
written in the proper register to override the default address.
This can cause an i2c error during probe and a consequent probe
failure.
Once the new i2c address is read from the device tree, override
the default address before any attempt to access the cec.
Tested with adv7533 and stm32mp157f.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Fixes: 680532c50b ("drm: adv7511: Add support for i2c_new_secondary_device")
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607213144.427177-1-antonio.borneo@foss.st.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a193f3b4e0 ]
Change all GEM SHMEM object functions that receive a GEM object
of type struct drm_gem_object to expect an object of type
struct drm_gem_shmem_object instead.
This change reduces the number of upcasts from struct drm_gem_object
by moving them into callers. The C compiler can now verify that the
GEM SHMEM functions are called with the correct type.
For consistency, the patch also renames drm_gem_shmem_free_object to
drm_gem_shmem_free. It further updates documentation for a number of
functions.
v3:
* fix docs for drm_gem_shmem_object_free()
v2:
* mention _object_ callbacks in docs (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211108093149.7226-4-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47d506d1a2 ]
NPCM can support up to 10 own slave addresses. In practice, only one
address is actually being used. In order to access addresses 2 and above,
need to switch register banks. The switch needs spinlock.
To avoid using spinlock for this useless feature removed support of SA >=
2. Also fix returned slave event enum.
Remove some comment since the bank selection is not required. The bank
selection is not required since the supported slave addresses are reduced.
Fixes: 56a1485b10 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0af5e0b411 ]
This implements the necessary change to no more use the embedded
connector in dw-hdmi and use the dedicated bridge connector driver
by passing DRM_BRIDGE_ATTACH_NO_CONNECTOR to the bridge attach call.
The necessary connector properties are added to handle the same
functionalities as the embedded dw-hdmi connector, i.e. the HDR
metadata, the CEC notifier & other flags.
The dw-hdmi output_port is set to 1 in order to look for a connector
next bridge in order to get DRM_BRIDGE_ATTACH_NO_CONNECTOR working.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020123947.2585572-5-narmstrong@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
