[ Upstream commit 4b2e7f99cd ]
In rdc321x_wdt_probe(), rdc321x_wdt_device.queue is initialized
after misc_register(), hence if ioctl is called before its
initialization which can call rdc321x_wdt_start() function,
it will see an uninitialized value of rdc321x_wdt_device.queue,
hence initialize it before misc_register().
Also, rdc321x_wdt_device.default_ticks is accessed in reset()
function called from write callback, thus initialize it before
misc_register().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200807112902.28764-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d837f7277f ]
md_bitmap_get_counter() has code:
```
if (bitmap->bp[page].hijacked ||
bitmap->bp[page].map == NULL)
csize = ((sector_t)1) << (bitmap->chunkshift +
PAGE_COUNTER_SHIFT - 1);
```
The minus 1 is wrong, this branch should report 2048 bits of space.
With "-1" action, this only report 1024 bit of space.
This bug code returns wrong blocks, but it doesn't inflence bitmap logic:
1. Most callers focus this function return value (the counter of offset),
not the parameter blocks.
2. The bug is only triggered when hijacked is true or map is NULL.
the hijacked true condition is very rare.
the "map == null" only true when array is creating or resizing.
3. Even the caller gets wrong blocks, current code makes caller just to
call md_bitmap_get_counter() one more time.
Signed-off-by: Zhao Heming <heming.zhao@suse.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6a5d95495 ]
If you replace a seed device in a sprouted fs, it appears to have
successfully replaced the seed device, but if you look closely, it
didn't. Here is an example.
$ mkfs.btrfs /dev/sda
$ btrfstune -S1 /dev/sda
$ mount /dev/sda /btrfs
$ btrfs device add /dev/sdb /btrfs
$ umount /btrfs
$ btrfs device scan --forget
$ mount -o device=/dev/sda /dev/sdb /btrfs
$ btrfs replace start -f /dev/sda /dev/sdc /btrfs
$ echo $?
0
BTRFS info (device sdb): dev_replace from /dev/sda (devid 1) to /dev/sdc started
BTRFS info (device sdb): dev_replace from /dev/sda (devid 1) to /dev/sdc finished
$ btrfs fi show
Label: none uuid: ab2c88b7-be81-4a7e-9849-c3666e7f9f4f
Total devices 2 FS bytes used 256.00KiB
devid 1 size 3.00GiB used 520.00MiB path /dev/sdc
devid 2 size 3.00GiB used 896.00MiB path /dev/sdb
Label: none uuid: 10bd3202-0415-43af-96a8-d5409f310a7e
Total devices 1 FS bytes used 128.00KiB
devid 1 size 3.00GiB used 536.00MiB path /dev/sda
So as per the replace start command and kernel log replace was successful.
Now let's try to clean mount.
$ umount /btrfs
$ btrfs device scan --forget
$ mount -o device=/dev/sdc /dev/sdb /btrfs
mount: /btrfs: wrong fs type, bad option, bad superblock on /dev/sdb, missing codepage or helper program, or other error.
[ 636.157517] BTRFS error (device sdc): failed to read chunk tree: -2
[ 636.180177] BTRFS error (device sdc): open_ctree failed
That's because per dev items it is still looking for the original seed
device.
$ btrfs inspect-internal dump-tree -d /dev/sdb
item 0 key (DEV_ITEMS DEV_ITEM 1) itemoff 16185 itemsize 98
devid 1 total_bytes 3221225472 bytes_used 545259520
io_align 4096 io_width 4096 sector_size 4096 type 0
generation 6 start_offset 0 dev_group 0
seek_speed 0 bandwidth 0
uuid 59368f50-9af2-4b17-91da-8a783cc418d4 <--- seed uuid
fsid 10bd3202-0415-43af-96a8-d5409f310a7e <--- seed fsid
item 1 key (DEV_ITEMS DEV_ITEM 2) itemoff 16087 itemsize 98
devid 2 total_bytes 3221225472 bytes_used 939524096
io_align 4096 io_width 4096 sector_size 4096 type 0
generation 0 start_offset 0 dev_group 0
seek_speed 0 bandwidth 0
uuid 56a0a6bc-4630-4998-8daf-3c3030c4256a <- sprout uuid
fsid ab2c88b7-be81-4a7e-9849-c3666e7f9f4f <- sprout fsid
But the replaced target has the following uuid+fsid in its superblock
which doesn't match with the expected uuid+fsid in its devitem.
$ btrfs in dump-super /dev/sdc | egrep '^generation|dev_item.uuid|dev_item.fsid|devid'
generation 20
dev_item.uuid 59368f50-9af2-4b17-91da-8a783cc418d4
dev_item.fsid ab2c88b7-be81-4a7e-9849-c3666e7f9f4f [match]
dev_item.devid 1
So if you provide the original seed device the mount shall be
successful. Which so long happening in the test case btrfs/163.
$ btrfs device scan --forget
$ mount -o device=/dev/sda /dev/sdb /btrfs
Fix in this patch:
If a seed is not sprouted then there is no replacement of it, because of
its read-only filesystem with a read-only device. Similarly, in the case
of a sprouted filesystem, the seed device is still read only. So, mark
it as you can't replace a seed device, you can only add a new device and
then delete the seed device. If replace is attempted then returns
-EINVAL.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95d620adb4 ]
[Why]
Currently mode validation is bypassed if remote sink exists. That
leads to mode set issue when a BW bottle neck exists in the link path,
e.g., a DP-to-HDMI converter that only supports HDMI 1.4.
Any invalid mode passed to Linux user space will cause the modeset
failure due to limitation of Linux user space implementation.
[How]
Mode validation is skipped only if in edid override. For real remote
sink, clock limit check should be done for HDMI remote sink.
Have HDMI related remote sink going through mode validation to
elimiate modes which pixel clock exceeds BW limitation.
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c07fa6c163 ]
When I cat some module parameters by sysfs, it displays as follows.
It's better to add a newline for easy reading.
root@syzkaller:~# cd /sys/module/test_power/parameters/
root@syzkaller:/sys/module/test_power/parameters# cat ac_online
onroot@syzkaller:/sys/module/test_power/parameters# cat battery_present
trueroot@syzkaller:/sys/module/test_power/parameters# cat battery_health
goodroot@syzkaller:/sys/module/test_power/parameters# cat battery_status
dischargingroot@syzkaller:/sys/module/test_power/parameters# cat battery_technology
LIONroot@syzkaller:/sys/module/test_power/parameters# cat usb_online
onroot@syzkaller:/sys/module/test_power/parameters#
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8306266c1d ]
The fr_hard_header function is used to prepend the header to skbs before
transmission. It is used in 3 situations:
1) When a control packet is generated internally in this driver;
2) When a user sends an skb on an Ethernet-emulating PVC device;
3) When a user sends an skb on a normal PVC device.
These 3 situations need to be handled differently by fr_hard_header.
Different headers should be prepended to the skb in different situations.
Currently fr_hard_header distinguishes these 3 situations using
skb->protocol. For situation 1 and 2, a special skb->protocol value
will be assigned before calling fr_hard_header, so that it can recognize
these 2 situations. All skb->protocol values other than these special ones
are treated by fr_hard_header as situation 3.
However, it is possible that in situation 3, the user sends an skb with
one of the special skb->protocol values. In this case, fr_hard_header
would incorrectly treat it as situation 1 or 2.
This patch tries to solve this issue by using skb->dev instead of
skb->protocol to distinguish between these 3 situations. For situation
1, skb->dev would be NULL; for situation 2, skb->dev->type would be
ARPHRD_ETHER; and for situation 3, skb->dev->type would be ARPHRD_DLCI.
This way fr_hard_header would be able to distinguish these 3 situations
correctly regardless what skb->protocol value the user tries to use in
situation 3.
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a3decac08 ]
The function should check the validity of the pxm value before using
it to index the pxm_to_node_map[] array.
Whilst hardening this code may be good in general, the main intent
here is to enable following patches that use this function to replace
acpi_map_pxm_to_node() for non SRAT usecases which should return
NO_NUMA_NODE for PXM entries not matching with those in SRAT.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8df0fa39bd ]
When callers pass XFS_BMAPI_REMAP into xfs_bunmapi, they want the extent
to be unmapped from the given file fork without the extent being freed.
We do this for non-rt files, but we forgot to do this for realtime
files. So far this isn't a big deal since nobody makes a bunmapi call
to a rt file with the REMAP flag set, but don't leave a logic bomb.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a194c5f2d2 ]
The @node passed to cpumask_of_node() can be NUMA_NO_NODE, in that
case it will trigger the following WARN_ON(node >= nr_node_ids) due to
mismatched data types of @node and @nr_node_ids. Actually we should
return cpu_all_mask just like most other architectures do if passed
NUMA_NO_NODE.
Also add a similar check to the inline cpumask_of_node() in numa.h.
Signed-off-by: Zhengyuan Liu <liuzhengyuan@tj.kylinos.cn>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20200921023936.21846-1-liuzhengyuan@tj.kylinos.cn
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18a367e894 ]
If the xhci-plat.c is the platform driver, after the runtime pm is
enabled, the xhci_suspend is called if nothing is connected on
the port. When the system goes to suspend, it will call xhci_suspend again
if USB wakeup is enabled.
Since the runtime suspend wakeup setting is not always the same as
system suspend wakeup setting, eg, at runtime suspend we always need
wakeup if the controller is in low power mode; but at system suspend,
we may not need wakeup. So, we move the judgement after changing
wakeup setting.
[commit message rewording -Mathias]
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fd0e2a6df ]
uio_register_device() do two things.
1) get an uio id from a global pool, e.g. the id is <A>
2) create file nodes like /sys/class/uio/uio<A>
uio_unregister_device() do two things.
1) free the uio id <A> and return it to the global pool
2) free the file node /sys/class/uio/uio<A>
There is a situation is that one worker is calling uio_unregister_device(),
and another worker is calling uio_register_device().
If the two workers are X and Y, they go as below sequence,
1) X free the uio id <AAA>
2) Y get an uio id <AAA>
3) Y create file node /sys/class/uio/uio<AAA>
4) X free the file note /sys/class/uio/uio<AAA>
Then it will failed at the 3rd step and cause the phenomenon we saw as it
is creating a duplicated file node.
Failure reports as follows:
sysfs: cannot create duplicate filename '/class/uio/uio10'
Call Trace:
sysfs_do_create_link_sd.isra.2+0x9e/0xb0
sysfs_create_link+0x25/0x40
device_add+0x2c4/0x640
__uio_register_device+0x1c5/0x576 [uio]
adf_uio_init_bundle_dev+0x231/0x280 [intel_qat]
adf_uio_register+0x1c0/0x340 [intel_qat]
adf_dev_start+0x202/0x370 [intel_qat]
adf_dev_start_async+0x40/0xa0 [intel_qat]
process_one_work+0x14d/0x410
worker_thread+0x4b/0x460
kthread+0x105/0x140
? process_one_work+0x410/0x410
? kthread_bind+0x40/0x40
ret_from_fork+0x1f/0x40
Code: 85 c0 48 89 c3 74 12 b9 00 10 00 00 48 89 c2 31 f6 4c 89 ef
e8 ec c4 ff ff 4c 89 e2 48 89 de 48 c7 c7 e8 b4 ee b4 e8 6a d4 d7
ff <0f> 0b 48 89 df e8 20 fa f3 ff 5b 41 5c 41 5d 5d c3 66 0f 1f 84
---[ end trace a7531c1ed5269e84 ]---
c6xxvf b002:00:00.0: Failed to register UIO devices
c6xxvf b002:00:00.0: Failed to register UIO devices
Signed-off-by: Lang Dai <lang.dai@intel.com>
Link: https://lore.kernel.org/r/1600054002-17722-1-git-send-email-lang.dai@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01a163c520 ]
The STiH418 can be controlled the same way as STiH407 &
STiH410 regarding cpufreq.
Signed-off-by: Alain Volmat <avolmat@me.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5fca7c55f ]
AT_VECTOR_SIZE_ARCH should be defined with the maximum number of
NEW_AUX_ENT entries that ARCH_DLINFO can contain, but it wasn't defined
for RISC-V at all even though ARCH_DLINFO will contain one NEW_AUX_ENT
for the VDSO address.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f875bcc375 ]
Fixes the following coccinelle report:
drivers/media/usb/uvc/uvc_ctrl.c:1860:5-11:
ERROR: invalid reference to the index variable of the iterator on line 1854
by adding a boolean variable to check if the loop has found the
Found using - Coccinelle (http://coccinelle.lip6.fr)
[Replace cursor variable with bool found]
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b18b099e04 ]
On my system the kernel processes the "kgdb_earlycon" parameter before
the "kgdbcon" parameter. When we setup "kgdb_earlycon" we'll end up
in kgdb_register_callbacks() and "kgdb_use_con" won't have been set
yet so we'll never get around to starting "kgdbcon". Let's remedy
this by detecting that the IO module was already registered when
setting "kgdb_use_con" and registering the console then.
As part of this, to avoid pre-declaring things, move the handling of
the "kgdbcon" further down in the file.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200630151422.1.I4aa062751ff5e281f5116655c976dff545c09a46@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3102bc0e6a ]
In the absence of ACPI or DT topology data, we fallback to haphazardly
decoding *something* out of MPIDR. Sadly, the contents of that register are
mostly unusable due to the implementation leniancy and things like Aff0
having to be capped to 15 (despite being encoded on 8 bits).
Consider a simple system with a single package of 32 cores, all under the
same LLC. We ought to be shoving them in the same core_sibling mask, but
MPIDR is going to look like:
| CPU | 0 | ... | 15 | 16 | ... | 31 |
|------+---+-----+----+----+-----+----+
| Aff0 | 0 | ... | 15 | 0 | ... | 15 |
| Aff1 | 0 | ... | 0 | 1 | ... | 1 |
| Aff2 | 0 | ... | 0 | 0 | ... | 0 |
Which will eventually yield
core_sibling(0-15) == 0-15
core_sibling(16-31) == 16-31
NUMA woes
=========
If we try to play games with this and set up NUMA boundaries within those
groups of 16 cores via e.g. QEMU:
# Node0: 0-9; Node1: 10-19
$ qemu-system-aarch64 <blah> \
-smp 20 -numa node,cpus=0-9,nodeid=0 -numa node,cpus=10-19,nodeid=1
The scheduler's MC domain (all CPUs with same LLC) is going to be built via
arch_topology.c::cpu_coregroup_mask()
In there we try to figure out a sensible mask out of the topology
information we have. In short, here we'll pick the smallest of NUMA or
core sibling mask.
node_mask(CPU9) == 0-9
core_sibling(CPU9) == 0-15
MC mask for CPU9 will thus be 0-9, not a problem.
node_mask(CPU10) == 10-19
core_sibling(CPU10) == 0-15
MC mask for CPU10 will thus be 10-19, not a problem.
node_mask(CPU16) == 10-19
core_sibling(CPU16) == 16-19
MC mask for CPU16 will thus be 16-19... Uh oh. CPUs 16-19 are in two
different unique MC spans, and the scheduler has no idea what to make of
that. That triggers the WARN_ON() added by commit
ccf74128d6 ("sched/topology: Assert non-NUMA topology masks don't (partially) overlap")
Fixing MPIDR-derived topology
=============================
We could try to come up with some cleverer scheme to figure out which of
the available masks to pick, but really if one of those masks resulted from
MPIDR then it should be discarded because it's bound to be bogus.
I was hoping to give MPIDR a chance for SMT, to figure out which threads are
in the same core using Aff1-3 as core ID, but Sudeep and Robin pointed out
to me that there are systems out there where *all* cores have non-zero
values in their higher affinity fields (e.g. RK3288 has "5" in all of its
cores' MPIDR.Aff1), which would expose a bogus core ID to userspace.
Stop using MPIDR for topology information. When no other source of topology
information is available, mark each CPU as its own core and its NUMA node
as its LLC domain.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200829130016.26106-1-valentin.schneider@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87d7ad089b ]
via_save_pcictrlreg() should be called with host->lock held
as it writes to pm_pcictrl_reg, otherwise there can be a race
condition between via_sd_suspend() and via_sdc_card_detect().
The same pattern is used in the function via_reset_pcictrl()
as well, where via_save_pcictrlreg() is called with host->lock
held.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lore.kernel.org/r/20200822061528.7035-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49b20d981d ]
1) the numerator and/or denominator might be 0, in that case
fall back to the default frame interval. This is per the spec
and this caused a v4l2-compliance failure.
2) the updated frame interval wasn't returned in the s_frame_interval
subdev op.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 780d815dcc ]
clang static analysis reports this problem
tw5864-video.c:773:32: warning: The left expression of the compound
assignment is an uninitialized value.
The computed value will also be garbage
fintv->stepwise.max.numerator *= std_max_fps;
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^
stepwise.max is set with frameinterval, which comes from
ret = tw5864_frameinterval_get(input, &frameinterval);
fintv->stepwise.step = frameinterval;
fintv->stepwise.min = frameinterval;
fintv->stepwise.max = frameinterval;
fintv->stepwise.max.numerator *= std_max_fps;
When tw5864_frameinterval_get() fails, frameinterval is not
set. So check the status and fix another similar problem.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bbe2a90a0 ]
The patch addresses the compliance test failures while running
TD.PD.CP.E3, TD.PD.CP.E4, TD.PD.CP.E5 of the "Deterministic PD
Compliance MOI" test plan published in https://www.usb.org/usbc.
For a product to be Type-C compliant, it's expected that these tests
are run on usb.org certified Type-C compliance tester as mentioned in
https://www.usb.org/usbc.
The purpose of the tests TD.PD.CP.E3, TD.PD.CP.E4, TD.PD.CP.E5 is to
verify the PR_SWAP response of the device. While doing so, the test
asserts that Source Capabilities message is NOT received from the test
device within tSwapSourceStart min (20 ms) from the time the last bit
of GoodCRC corresponding to the RS_RDY message sent by the UUT was
sent. If it does then the test fails.
This is in line with the requirements from the USB Power Delivery
Specification Revision 3.0, Version 1.2:
"6.6.8.1 SwapSourceStartTimer
The SwapSourceStartTimer Shall be used by the new Source, after a
Power Role Swap or Fast Role Swap, to ensure that it does not send
Source_Capabilities Message before the new Sink is ready to receive
the
Source_Capabilities Message. The new Source Shall Not send the
Source_Capabilities Message earlier than tSwapSourceStart after the
last bit of the EOP of GoodCRC Message sent in response to the PS_RDY
Message sent by the new Source indicating that its power supply is
ready."
The patch makes sure that TCPM does not send the Source_Capabilities
Message within tSwapSourceStart(20ms) by transitioning into
SRC_STARTUP only after tSwapSourceStart(20ms).
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200817183828.1895015-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b305dfe2e9 ]
The default RGB quantization range for BT.2020 is full range (just as for
all the other RGB pixel encodings), not limited range.
Update the V4L2_MAP_QUANTIZATION_DEFAULT macro and documentation
accordingly.
Also mention that HSV is always full range and cannot be limited range.
When RGB BT2020 was introduced in V4L2 it was not clear whether it should
be limited or full range, but full range is the right (and consistent)
choice.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fd3c8f34d ]
When simulate random transfer fail for sdio write and read, it happened
"payload length exceeds max htc length" and recovery later sometimes.
Test steps:
1. Add config and update kernel:
CONFIG_FAIL_MMC_REQUEST=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
2. Run simulate fail:
cd /sys/kernel/debug/mmc1/fail_mmc_request
echo 10 > probability
echo 10 > times # repeat until hitting issues
3. It happened payload length exceeds max htc length.
[ 199.935506] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088
....
[ 264.990191] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088
4. after some time, such as 60 seconds, it start recovery which triggered
by wmi command timeout for periodic scan.
[ 269.229232] ieee80211 phy0: Hardware restart was requested
[ 269.734693] ath10k_sdio mmc1:0001:1: device successfully recovered
The simulate fail of sdio is not a real sdio transter fail, it only
set an error status in mmc_should_fail_request after the transfer end,
actually the transfer is success, then sdio_io_rw_ext_helper will
return error status and stop transfer the left data. For example,
the really RX len is 286 bytes, then it will split to 2 blocks in
sdio_io_rw_ext_helper, one is 256 bytes, left is 30 bytes, if the
first 256 bytes get an error status by mmc_should_fail_request,then
the left 30 bytes will not read in this RX operation. Then when the
next RX arrive, the left 30 bytes will be considered as the header
of the read, the top 4 bytes of the 30 bytes will be considered as
lookaheads, but actually the 4 bytes is not the lookaheads, so the len
from this lookaheads is not correct, it exceeds max htc length 4088
sometimes. When happened exceeds, the buffer chain is not matched between
firmware and ath10k, then it need to start recovery ASAP. Recently then
recovery will be started by wmi command timeout, but it will be long time
later, for example, it is 60+ seconds later from the periodic scan, if
it does not have periodic scan, it will be longer.
Start recovery when it happened "payload length exceeds max htc length"
will be reasonable.
This patch only effect sdio chips.
Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200108031957.22308-3-wgong@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e1ba47c60 ]
clang static analysis reports this repesentative error
pvr2fb.c:1049:2: warning: 1st function call argument
is an uninitialized value [core.CallAndMessage]
if (*cable_arg)
^~~~~~~~~~~~~~~
Problem is that cable_arg depends on the input loop to
set the cable_arg[0]. If it does not, then some random
value from the stack is used.
A similar problem exists for output_arg.
So initialize cable_arg and output_arg.
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720191845.20115-1-trix@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4c32e87de ]
The realtime bitmap and summary files are regular files that are hidden
away from the directory tree. Since they're regular files, inode
inactivation will try to purge what it thinks are speculative
preallocations beyond the incore size of the file. Unfortunately,
xfs_growfs_rt forgets to update the incore size when it resizes the
inodes, with the result that inactivating the rt inodes at unmount time
will cause their contents to be truncated.
Fix this by updating the incore size when we change the ondisk size as
part of updating the superblock. Note that we don't do this when we're
allocating blocks to the rt inodes because we actually want those blocks
to get purged if the growfs fails.
This fixes corruption complaints from the online rtsummary checker when
running xfs/233. Since that test requires rmap, one can also trigger
this by growing an rt volume, cycling the mount, and creating rt files.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7bf738ba11 ]
Commit 6f24ff97e3 ("power: supply: bq27xxx_battery: Add the
BQ27Z561 Battery monitor") and commit d74534c277 ("power:
bq27xxx_battery: Add support for additional bq27xxx family devices")
added support for new device types by copying most of the code and
adding necessary quirks.
However they did not copy the code in bq27xxx_battery_status()
responsible for returning POWER_SUPPLY_STATUS_NOT_CHARGING.
Unify the bq27xxx_battery_status() so for all types when charger is
supplied, it will return "not charging" status.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2d05059e1 ]
Lockdep complains at boot:
=============================
[ BUG: Invalid wait context ]
5.7.0-05093-g46d91ecd597b #98 Not tainted
-----------------------------
swapper/1 is trying to lock:
0000000060931b98 (&desc[i].request_mutex){+.+.}-{3:3}, at: __setup_irq+0x11d/0x623
other info that might help us debug this:
context-{4:4}
1 lock held by swapper/1:
#0: 000000006074fed8 (sigio_spinlock){+.+.}-{2:2}, at: sigio_lock+0x1a/0x1c
stack backtrace:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0-05093-g46d91ecd597b #98
Stack:
7fa4fab0 6028dfd1 0000002a 6008bea5
7fa50700 7fa50040 7fa4fac0 6028e016
7fa4fb50 6007f6da 60959c18 00000000
Call Trace:
[<60023a0e>] show_stack+0x13b/0x155
[<6028e016>] dump_stack+0x2a/0x2c
[<6007f6da>] __lock_acquire+0x515/0x15f2
[<6007eb50>] lock_acquire+0x245/0x273
[<6050d9f1>] __mutex_lock+0xbd/0x325
[<6050dc76>] mutex_lock_nested+0x1d/0x1f
[<6008e27e>] __setup_irq+0x11d/0x623
[<6008e8ed>] request_threaded_irq+0x169/0x1a6
[<60021eb0>] um_request_irq+0x1ee/0x24b
[<600234ee>] write_sigio_irq+0x3b/0x76
[<600383ca>] sigio_broken+0x146/0x2e4
[<60020bd8>] do_one_initcall+0xde/0x281
Because we hold sigio_spinlock and then get into requesting
an interrupt with a mutex.
Change the spinlock to a mutex to avoid that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d7ab88a98 ]
As syzbot reported:
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x21c/0x280 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:122
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:219
f2fs_lookup+0xe05/0x1a80 fs/f2fs/namei.c:503
lookup_open fs/namei.c:3082 [inline]
open_last_lookups fs/namei.c:3177 [inline]
path_openat+0x2729/0x6a90 fs/namei.c:3365
do_filp_open+0x2b8/0x710 fs/namei.c:3395
do_sys_openat2+0xa88/0x1140 fs/open.c:1168
do_sys_open fs/open.c:1184 [inline]
__do_compat_sys_openat fs/open.c:1242 [inline]
__se_compat_sys_openat+0x2a4/0x310 fs/open.c:1240
__ia32_compat_sys_openat+0x56/0x70 fs/open.c:1240
do_syscall_32_irqs_on arch/x86/entry/common.c:80 [inline]
__do_fast_syscall_32+0x129/0x180 arch/x86/entry/common.c:139
do_fast_syscall_32+0x6a/0xc0 arch/x86/entry/common.c:162
do_SYSENTER_32+0x73/0x90 arch/x86/entry/common.c:205
entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
In f2fs_lookup(), @res_page could be used before being initialized,
because in __f2fs_find_entry(), once F2FS_I(dir)->i_current_depth was
been fuzzed to zero, then @res_page will never be initialized, causing
this kmsan warning, relocating @res_page initialization place to fix
this bug.
Reported-by: syzbot+0eac6f0bbd558fd866d7@syzkaller.appspotmail.com
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bafb056ce2 ]
The de facto (and apparently uncommented) standard for using an mm had,
thanks to this code in sparc if nothing else, been that you must have a
reference on mm_users *and that reference must have been obtained with
mmget()*, i.e., from a thread with a reference to mm_users that had used
the mm.
The introduction of mmget_not_zero() in commit d2005e3f41
("userfaultfd: don't pin the user memory in userfaultfd_file_create()")
allowed mm_count holders to aoperate on user mappings asynchronously
from the actual threads using the mm, but they were not to load those
mappings into their TLB (i.e., walking vmas and page tables is okay,
kthread_use_mm() is not).
io_uring 2b188cc1bb ("Add io_uring IO interface") added code which
does a kthread_use_mm() from a mmget_not_zero() refcount.
The problem with this is code which previously assumed mm == current->mm
and mm->mm_users == 1 implies the mm will remain single-threaded at
least until this thread creates another mm_users reference, has now
broken.
arch/sparc/kernel/smp_64.c:
if (atomic_read(&mm->mm_users) == 1) {
cpumask_copy(mm_cpumask(mm), cpumask_of(cpu));
goto local_flush_and_out;
}
vs fs/io_uring.c
if (unlikely(!(ctx->flags & IORING_SETUP_SQPOLL) ||
!mmget_not_zero(ctx->sqo_mm)))
return -EFAULT;
kthread_use_mm(ctx->sqo_mm);
mmget_not_zero() could come in right after the mm_users == 1 test, then
kthread_use_mm() which sets its CPU in the mm_cpumask. That update could
be lost if cpumask_copy() occurs afterward.
I propose we fix this by allowing mmget_not_zero() to be a first-class
reference, and not have this obscure undocumented and unchecked
restriction.
The basic fix for sparc64 is to remove its mm_cpumask clearing code. The
optimisation could be effectively restored by sending IPIs to mm_cpumask
members and having them remove themselves from mm_cpumask. This is more
tricky so I leave it as an exercise for someone with a sparc64 SMP.
powerpc has a (currently similarly broken) example.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200914045219.3736466-4-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d53c3dfb23 upstream.
Reading and modifying current->mm and current->active_mm and switching
mm should be done with irqs off, to prevent races seeing an intermediate
state.
This is similar to commit 38cf307c1f ("mm: fix kthread_use_mm() vs TLB
invalidate"). At exec-time when the new mm is activated, the old one
should usually be single-threaded and no longer used, unless something
else is holding an mm_users reference (which may be possible).
Absent other mm_users, there is also a race with preemption and lazy tlb
switching. Consider the kernel_execve case where the current thread is
using a lazy tlb active mm:
call_usermodehelper()
kernel_execve()
old_mm = current->mm;
active_mm = current->active_mm;
*** preempt *** --------------------> schedule()
prev->active_mm = NULL;
mmdrop(prev active_mm);
...
<-------------------- schedule()
current->mm = mm;
current->active_mm = mm;
if (!old_mm)
mmdrop(active_mm);
If we switch back to the kernel thread from a different mm, there is a
double free of the old active_mm, and a missing free of the new one.
Closing this race only requires interrupts to be disabled while ->mm
and ->active_mm are being switched, but the TLB problem requires also
holding interrupts off over activate_mm. Unfortunately not all archs
can do that yet, e.g., arm defers the switch if irqs are disabled and
expects finish_arch_post_lock_switch() to be called to complete the
flush; um takes a blocking lock in activate_mm().
So as a first step, disable interrupts across the mm/active_mm updates
to close the lazy tlb preempt race, and provide an arch option to
extend that to activate_mm which allows architectures doing IPI based
TLB shootdowns to close the second race.
This is a bit ugly, but in the interest of fixing the bug and backporting
before all architectures are converted this is a compromise.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[mpe: Manual backport to 4.19 due to membarrier_exec_mmap(mm) changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200914045219.3736466-2-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f6bac19cf6 ]
When building with W=1 we get the following warning:
arch/powerpc/platforms/powernv/smp.c: In function ‘pnv_smp_cpu_kill_self’:
arch/powerpc/platforms/powernv/smp.c:276:16: error: suggest braces around
empty body in an ‘if’ statement [-Werror=empty-body]
276 | cpu, srr1);
| ^
cc1: all warnings being treated as errors
The full context is this block:
if (srr1 && !generic_check_cpu_restart(cpu))
DBG("CPU%d Unexpected exit while offline srr1=%lx!\n",
cpu, srr1);
When building with DEBUG undefined DBG() expands to nothing and GCC emits
the warning due to the lack of braces around an empty statement.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804005410.146094-2-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 921c7ebd13 ]
If should_futex_fail() returns true in futex_wake_pi(), then the 'ret'
variable is set to -EFAULT and then immediately overwritten. So the failure
injection is non-functional.
Fix it by actually leaving the function and returning -EFAULT.
The Fixes tag is kinda blury because the initial commit which introduced
failure injection was already sloppy, but the below mentioned commit broke
it completely.
[ tglx: Massaged changelog ]
Fixes: 6b4f4bc9cb ("locking/futex: Allow low-level atomic operations to return -EAGAIN")
Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200927000858.24219-1-mateusznosek0@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e4c309f9f ]
ata_qc_complete_multiple() has to be called with the tags physically
active, that is the hw tag is at bit 0. ap->qc_active has the same tag
at bit ATA_TAG_INTERNAL instead, so call ata_qc_get_active() to fix that
up. This is done in the vein of 8385d756e1 ("libata: Fix retrieving of
active qcs").
Fixes: 28361c4036 ("libata: add extra internal command")
Tested-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0daf2bf5a2 ]
Each EMAD transaction stores the skb used to issue the EMAD request
('trans->tx_skb') so that the request could be retried in case of a
timeout. The skb can be freed when a corresponding response is received
or as part of the retry logic (e.g., failed retransmit, exceeded maximum
number of retries).
The two tasks (i.e., response processing and retransmits) are
synchronized by the atomic 'trans->active' field which ensures that
responses to inactive transactions are ignored.
In case of a failed retransmit the transaction is finished and all of
its resources are freed. However, the current code does not mark it as
inactive. Syzkaller was able to hit a race condition in which a
concurrent response is processed while the transaction's resources are
being freed, resulting in a use-after-free [1].
Fix the issue by making sure to mark the transaction as inactive after a
failed retransmit and free its resources only if a concurrent task did
not already do that.
[1]
BUG: KASAN: use-after-free in consume_skb+0x30/0x370
net/core/skbuff.c:833
Read of size 4 at addr ffff88804f570494 by task syz-executor.0/1004
CPU: 0 PID: 1004 Comm: syz-executor.0 Not tainted 5.8.0-rc7+ #68
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xf6/0x16e lib/dump_stack.c:118
print_address_description.constprop.0+0x1c/0x250
mm/kasan/report.c:383
__kasan_report mm/kasan/report.c:513 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
check_memory_region_inline mm/kasan/generic.c:186 [inline]
check_memory_region+0x14e/0x1b0 mm/kasan/generic.c:192
instrument_atomic_read include/linux/instrumented.h:56 [inline]
atomic_read include/asm-generic/atomic-instrumented.h:27 [inline]
refcount_read include/linux/refcount.h:147 [inline]
skb_unref include/linux/skbuff.h:1044 [inline]
consume_skb+0x30/0x370 net/core/skbuff.c:833
mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592
mlxsw_emad_process_response drivers/net/ethernet/mellanox/mlxsw/core.c:651 [inline]
mlxsw_emad_rx_listener_func+0x5c9/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:672
mlxsw_core_skb_receive+0x4df/0x770 drivers/net/ethernet/mellanox/mlxsw/core.c:2063
mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline]
mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651
tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550
__do_softirq+0x223/0x964 kernel/softirq.c:292
asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711
Allocated by task 1006:
save_stack+0x1b/0x40 mm/kasan/common.c:48
set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc mm/kasan/common.c:494 [inline]
__kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467
slab_post_alloc_hook mm/slab.h:586 [inline]
slab_alloc_node mm/slub.c:2824 [inline]
slab_alloc mm/slub.c:2832 [inline]
kmem_cache_alloc+0xcd/0x2e0 mm/slub.c:2837
__build_skb+0x21/0x60 net/core/skbuff.c:311
__netdev_alloc_skb+0x1e2/0x360 net/core/skbuff.c:464
netdev_alloc_skb include/linux/skbuff.h:2810 [inline]
mlxsw_emad_alloc drivers/net/ethernet/mellanox/mlxsw/core.c:756 [inline]
mlxsw_emad_reg_access drivers/net/ethernet/mellanox/mlxsw/core.c:787 [inline]
mlxsw_core_reg_access_emad+0x1ab/0x1420 drivers/net/ethernet/mellanox/mlxsw/core.c:1817
mlxsw_reg_trans_query+0x39/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:1831
mlxsw_sp_sb_pm_occ_clear drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:260 [inline]
mlxsw_sp_sb_occ_max_clear+0xbff/0x10a0 drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:1365
mlxsw_devlink_sb_occ_max_clear+0x76/0xb0 drivers/net/ethernet/mellanox/mlxsw/core.c:1037
devlink_nl_cmd_sb_occ_max_clear_doit+0x1ec/0x280 net/core/devlink.c:1765
genl_family_rcv_msg_doit net/netlink/genetlink.c:669 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:714 [inline]
genl_rcv_msg+0x617/0x980 net/netlink/genetlink.c:731
netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2470
genl_rcv+0x24/0x40 net/netlink/genetlink.c:742
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg+0x150/0x190 net/socket.c:671
____sys_sendmsg+0x6d8/0x840 net/socket.c:2359
___sys_sendmsg+0xff/0x170 net/socket.c:2413
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2446
do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 73:
save_stack+0x1b/0x40 mm/kasan/common.c:48
set_track mm/kasan/common.c:56 [inline]
kasan_set_free_info mm/kasan/common.c:316 [inline]
__kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455
slab_free_hook mm/slub.c:1474 [inline]
slab_free_freelist_hook mm/slub.c:1507 [inline]
slab_free mm/slub.c:3072 [inline]
kmem_cache_free+0xbe/0x380 mm/slub.c:3088
kfree_skbmem net/core/skbuff.c:622 [inline]
kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:616
__kfree_skb net/core/skbuff.c:679 [inline]
consume_skb net/core/skbuff.c:837 [inline]
consume_skb+0xe1/0x370 net/core/skbuff.c:831
mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592
mlxsw_emad_transmit_retry.isra.0+0x9d/0xc0 drivers/net/ethernet/mellanox/mlxsw/core.c:613
mlxsw_emad_trans_timeout_work+0x43/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:625
process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269
worker_thread+0x9e/0x1050 kernel/workqueue.c:2415
kthread+0x355/0x470 kernel/kthread.c:291
ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293
The buggy address belongs to the object at ffff88804f5703c0
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 212 bytes inside of
224-byte region [ffff88804f5703c0, ffff88804f5704a0)
The buggy address belongs to the page:
page:ffffea00013d5c00 refcount:1 mapcount:0 mapping:0000000000000000
index:0x0
flags: 0x100000000000200(slab)
raw: 0100000000000200 dead000000000100 dead000000000122 ffff88806c625400
raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88804f570380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
ffff88804f570400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88804f570480: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff88804f570500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff88804f570580: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
Fixes: caf7297e7a ("mlxsw: core: Introduce support for asynchronous EMAD register access")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
