[ Upstream commit 828c79d9feb000acbd9c15bd1ed7e0914473b363 ]
If the firmware crashes in the de-activation / re-activation
of the link during CSA, we will not have a valid phy_ctxt
pointer in mvmvif. This is a legit case, but when mac80211
removes the station to cleanup our state during the
re-configuration, we need to make sure we clear ap_sta
otherwise we won't re-add the station after the firmware has
been restarted. Later on, we'd activate the link, try to send
a TLC command crash again on ASSERT 3508.
Fix this by properly cleaning up our state.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230913145231.2651e6f6a55a.I4cd50e88ee5c23c1c8dd5b157a800e4b4c96f236@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05f136220d17839eb7c155f015ace9152f603225 ]
As previously reported by Alexander, whose commit 69403bad97
("wifi: mac80211: sdata can be NULL during AMPDU start") I'm
reverting as part of this commit, there's a race between station
destruction and aggregation setup, where the aggregation setup
can happen while the station is being removed and queue the work
after ieee80211_sta_tear_down_BA_sessions() has already run in
__sta_info_destroy_part1(), and thus the worker will run with a
now freed station. In his case, this manifested in a NULL sdata
pointer, but really there's no guarantee whatsoever.
The real issue seems to be that it's possible at all to have a
situation where this occurs - we want to stop the BA sessions
when doing _part1, but we cannot be sure, and WLAN_STA_BLOCK_BA
isn't necessarily effective since we don't know that the setup
isn't concurrently running and already got past the check.
Simply call ieee80211_sta_tear_down_BA_sessions() again in the
second part of station destruction, since at that point really
nothing else can hold a reference to the station any more.
Also revert the sdata checks since those are just misleading at
this point.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1474bc87fe57deac726cc10203f73daa6c3212f7 ]
This might seem pretty pointless rather than changing the locking
immediately, but it seems safer to run for a while with checks and
the old locking scheme, and then remove the wdev lock later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 730538edc8e0eb14b02708f65100a0deaf43e6cd ]
Lock the wiphy in the IP address notifier as another
place that should have it locked before calling into
the driver. This needs a bit of attention since the
notifier can be called while the wiphy is already
locked, when we remove an interface. Handle this by
not running the notifier in this case, and instead
calling out to the driver directly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0b5127fa134fe0284d58877b6b3133939c8b3ce ]
In ssb_calc_clock_rate(), there is a potential issue where the value of
m1 could be zero due to initialization using clkfactor_f6_resolv(). This
situation raised concerns about the possibility of a division by zero
error.
We fixed it by following the suggestions provided by Larry Finger
<Larry.Finger@lwfinger.net> and Michael Büsch <m@bues.ch>. The fix
involves returning a value of 1 instead of 0 in clkfactor_f6_resolv().
This modification ensures the proper functioning of the code and
eliminates the risk of division by zero errors.
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230904232346.34991-1-rand.sec96@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f05cfc78c6880e06940ea78fbc43f6392710f17 ]
Register RLC_SPM_MC_CNTL is not blocked by L1 policy, VF can
directly access it through MMIO during SRIOV runtime.
v2: use SOC15 interface to access registers
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a728342ae4ec2a7fdab0038b11427579424f133e ]
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/imu_v11_0.c: In function ‘imu_v11_0_init_microcode’:
drivers/gpu/drm/amd/amdgpu/imu_v11_0.c:52:54: warning: ‘_imu.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
drivers/gpu/drm/amd/amdgpu/imu_v11_0.c:52:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef9718b3d54e822de294351251f3a574f8a082ce ]
Fix noise from speakers connected to AUX port when no sound is playing.
The problem occurs because the `alc_shutup_pins` function includes
a 0x10ec0257 vendor ID, which causes noise on Lenovo IdeaPad 3 15IAU7 with
Realtek ALC257 codec when no sound is playing.
Removing this vendor ID from the function fixes the bug.
Fixes: 70794b9563fe ("ALSA: hda/realtek: Add more codec ID to no shutup pins list")
Signed-off-by: Parsa Poorshikhian <parsa.poorsh@gmail.com>
Link: https://patch.msgid.link/20240810150939.330693-1-parsa.poorsh@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aad41832326723627ad8ac9ee8a543b6dca4454d ]
During Linux graceful reboot, the GPIO interrupts are not disabled.
Since the drivers are not removed during graceful reboot,
the logic to call mlxbf3_gpio_irq_disable() is not triggered.
Interrupts that remain enabled can cause issues on subsequent boots.
For example, the mlxbf-gige driver contains PHY logic to bring up the link.
If the gpio-mlxbf3 driver loads first, the mlxbf-gige driver
will use a GPIO interrupt to bring up the link.
Otherwise, it will use polling.
The next time Linux boots and loads the drivers in this order, we encounter the issue:
- mlxbf-gige loads first and uses polling while the GPIO10
interrupt is still enabled from the previous boot. So if
the interrupt triggers, there is nothing to clear it.
- gpio-mlxbf3 loads.
- i2c-mlxbf loads. The interrupt doesn't trigger for I2C
because it is shared with the GPIO interrupt line which
was not cleared.
The solution is to add a shutdown function to the GPIO driver to clear and disable
all interrupts. Also clear the interrupt after disabling it in mlxbf3_gpio_irq_disable().
Fixes: 38a700efc5 ("gpio: mlxbf3: Add gpio driver support")
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240611171509.22151-1-asmaa@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be5e816d00a506719e9dbb1a9c861c5ced30a109 ]
When config TC during the reset process, may cause a deadlock, the flow is
as below:
pf reset start
│
▼
......
setup tc │
│ ▼
▼ DOWN: napi_disable()
napi_disable()(skip) │
│ │
▼ ▼
...... ......
│ │
▼ │
napi_enable() │
▼
UINIT: netif_napi_del()
│
▼
......
│
▼
INIT: netif_napi_add()
│
▼
...... global reset start
│ │
▼ ▼
UP: napi_enable()(skip) ......
│ │
▼ ▼
...... napi_disable()
In reset process, the driver will DOWN the port and then UINIT, in this
case, the setup tc process will UP the port before UINIT, so cause the
problem. Adds a DOWN process in UINIT to fix it.
Fixes: bb6b94a896 ("net: hns3: Add reset interface implementation in client")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30545e17eac1f50c5ef49644daf6af205100a965 ]
Consider the followed case that the user change speed and reset the net
interface. Before the hw change speed successfully, the driver get old
old speed from hw by timer task. After reset, the previous speed is config
to hw. As a result, the new speed is configed successfully but lost after
PF reset. The followed pictured shows more dirrectly.
+------+ +----+ +----+
| USER | | PF | | HW |
+---+--+ +-+--+ +-+--+
| ethtool -s 100G | |
+------------------>| set speed 100G |
| +--------------------->|
| | set successfully |
| |<---------------------+---+
| |query cfg (timer task)| |
| +--------------------->| | handle speed
| | return 200G | | changing event
| ethtool --reset |<---------------------+ | (100G)
+------------------>| cfg previous speed |<--+
| | after reset (200G) |
| +--------------------->|
| | +---+
| |query cfg (timer task)| |
| +--------------------->| | handle speed
| | return 100G | | changing event
| |<---------------------+ | (200G)
| | |<--+
| |query cfg (timer task)|
| +--------------------->|
| | return 200G |
| |<---------------------+
| | |
v v v
This patch save new speed if hw change speed successfully, which will be
used after reset successfully.
Fixes: 2d03eacc0b ("net: hns3: Only update mac configuation when necessary")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8445d9d3c03101859663d34fda747f6a50947556 ]
Currently, if hns3 PF or VF FLR reset failed after five times retry,
the reset done process will directly release the semaphore
which has already released in hclge_reset_prepare_general.
This will cause down operation fail.
So this patch fixes it by adding reset state judgement. The up operation is
only called after successful PF FLR reset.
Fixes: 8627bdedc4 ("net: hns3: refactor the precedure of PF FLR")
Fixes: f28368bb45 ("net: hns3: refactor the procedure of VF FLR")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7965a7f32a53d9ad807ce2c53bdda69ba104974f ]
When deleting netns, it is possible to still have some tasks running,
e.g. background tasks like tcpdump running in the background, not
stopped because the test has been interrupted.
Before deleting the netns, it is then safer to kill all attached PIDs,
if any. That should reduce some noises after the end of some tests, and
help with the debugging of some issues. That's why this modification is
seen as a "fix".
Fixes: 25ae948b4478 ("selftests/net: add lib.sh")
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240813-upstream-net-20240813-selftests-net-lib-kill-v1-1-27b689b248b8@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd662c4218f9648e888bebde9468146965f3f8a0 ]
Objects' dump callbacks are not concurrency-safe per-se with reset bit
set. If two CPUs perform a reset at the same time, at least counter and
quota objects suffer from value underrun.
Prevent this by introducing dedicated locking callbacks for nfnetlink
and the asynchronous dump handling to serialize access.
Fixes: 43da04a593 ("netfilter: nf_tables: atomic dump and reset for stateful objects")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a552339063d37b3b1133d9dfc31f851edafb27bb ]
Relieve the dump callback from having to inspect nlmsg_type upon each
call, just do it once at start of the dump.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: bd662c4218f9 ("netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a893b9cdf6fa5758f43d323a1d7fa6d1bf489ff ]
No need to allocate it if one may just use struct netlink_callback's
scratch area for it.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: bd662c4218f9 ("netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecf49cad807061d880bea27a5da8e0114ddc7690 ]
Name it for what it is supposed to become, a real nft_obj_dump_ctx. No
functional change intended.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: bd662c4218f9 ("netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff16111cc10c82ee065ffbd9fa8d6210394ff8c6 ]
The code does not make use of cb->args fields past the first one, no
need to zero them.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: bd662c4218f9 ("netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0b6648b0446e59522819c75ba1dcb09e68d3e94 ]
In theory, dumpreset may fail and invalidate the preceeding log message.
Fix this and use the occasion to prepare for object reset locking, which
benefits from a few unrelated changes:
* Add an early call to nfnetlink_unicast if not resetting which
effectively skips the audit logging but also unindents it.
* Extract the table's name from the netlink attribute (which is verified
via earlier table lookup) to not rely upon validity of the looked up
table pointer.
* Do not use local variable family, it will vanish.
Fixes: 8e6cf365e1 ("audit: log nftables configuration change events")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d8dc1c7be8d3509e8f5164dd5df64c8e34d7eeb ]
Conntrack assumes an unconfirmed entry (not yet committed to global hash
table) has a refcount of 1 and is not visible to other cores.
With multicast forwarding this assumption breaks down because such
skbs get cloned after being picked up, i.e. ct->use refcount is > 1.
Likewise, bridge netfilter will clone broad/mutlicast frames and
all frames in case they need to be flood-forwarded during learning
phase.
For ip multicast forwarding or plain bridge flood-forward this will
"work" because packets don't leave softirq and are implicitly
serialized.
With nfqueue this no longer holds true, the packets get queued
and can be reinjected in arbitrary ways.
Disable this feature, I see no other solution.
After this patch, nfqueue cannot queue packets except the last
multicast/broadcast packet.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cd740b985963f874a1a094f1969e998b9d05554 ]
Commit 264640fc2c ("ipv6: distinguish frag queues by device
for multicast and link-local packets") modified the ipv6 fragment
reassembly logic to distinguish frag queues by device for multicast
and link-local packets but in fact only the main reassembly code
limits the use of the device to those address types and the netfilter
reassembly code uses the device for all packets.
This means that if fragments of a packet arrive on different interfaces
then netfilter will fail to reassemble them and the fragments will be
expired without going any further through the filters.
Fixes: 648700f76b ("inet: frags: use rhashtables for reassembly units")
Signed-off-by: Tom Hughes <tom@compton.nu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2cbb1603943281a604f5adc48079a148db5cb0d ]
This patch is based on the discussions between Neal Cardwell and
Eric Dumazet in the link
https://lore.kernel.org/netdev/20240726204105.1466841-1-quic_subashab@quicinc.com/
It was correctly pointed out that tp->window_clamp would not be
updated in cases where net.ipv4.tcp_moderate_rcvbuf=0 or if
(copied <= tp->rcvq_space.space). While it is expected for most
setups to leave the sysctl enabled, the latter condition may
not end up hitting depending on the TCP receive queue size and
the pattern of arriving data.
The updated check should be hit only on initial MSS update from
TCP_MIN_MSS to measured MSS value and subsequently if there was
an update to a larger value.
Fixes: 05f76b2d634e ("tcp: Adjust clamping window for applications specifying SO_RCVBUF")
Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com>
Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 655111b838cdabdb604f3625a9ff08c5eedb11da ]
ssn_offset field is u32 and is placed into the netlink response with
nla_put_u32(), but only 2 bytes are reserved for the attribute payload
in subflow_get_info_size() (even though it makes no difference
in the end, as it is aligned up to 4 bytes). Supply the correct
argument to the relevant nla_total_size() call to make it less
confusing.
Fixes: 5147dfb508 ("mptcp: allow dumping subflow context to userspace")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240812065024.GA19719@asgard.redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df934abb185c71c9f2fa07a5013672d0cbd36560 ]
A recent change to the driver exposed a bug where the MAC RX
filters (unicast MAC, broadcast MAC, and multicast MAC) are
configured and enabled before the RX path is fully initialized.
The result of this bug is that after the PHY is started packets
that match these MAC RX filters start to flow into the RX FIFO.
And then, after rx_init() is completed, these packets will go
into the driver RX ring as well. If enough packets are received
to fill the RX ring (default size is 128 packets) before the call
to request_irq() completes, the driver RX function becomes stuck.
This bug is intermittent but is most likely to be seen where the
oob_net0 interface is connected to a busy network with lots of
broadcast and multicast traffic.
All the MAC RX filters must be disabled until the RX path is ready,
i.e. all initialization is done and all the IRQs are installed.
Fixes: f7442a634ac0 ("mlxbf_gige: call request_irq() after NAPI initialized")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240809163612.12852-1-davthompson@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db1b4bedb9b97c6d34b03d03815147c04fffe8b4 ]
When there are multiple ap interfaces on one band and with WED on,
turning the interface down will cause a kernel panic on MT798X.
Previously, cb_priv was freed in mtk_wed_setup_tc_block() without
marking NULL,and mtk_wed_setup_tc_block_cb() didn't check the value, too.
Assign NULL after free cb_priv in mtk_wed_setup_tc_block() and check NULL
in mtk_wed_setup_tc_block_cb().
----------
Unable to handle kernel paging request at virtual address 0072460bca32b4f5
Call trace:
mtk_wed_setup_tc_block_cb+0x4/0x38
0xffffffc0794084bc
tcf_block_playback_offloads+0x70/0x1e8
tcf_block_unbind+0x6c/0xc8
...
---------
Fixes: 799684448e ("net: ethernet: mtk_wed: introduce wed wo support")
Signed-off-by: Zheng Zhang <everything411@qq.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa63c6434b6f6aaf9d8d599dc899bc0a074cc0ad ]
The VSC73xx has a busy flag used during MDIO operations. It is raised
when MDIO read/write operations are in progress. Without it, PHYs are
misconfigured and bus operations do not work as expected.
Fixes: 05bd97fc55 ("net: dsa: Add Vitesse VSC73xx DSA router driver")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb7e33d01db3aec128590391b2397384bab406b6 ]
Switch the delay loop during the Arbiter empty check from
vsc73xx_adjust_link() to use read_poll_timeout(). Functionally,
one msleep() call is eliminated at the end of the loop in the timeout
case.
As Russell King suggested:
"This [change] avoids the issue that on the last iteration, the code reads
the register, tests it, finds the condition that's being waiting for is
false, _then_ waits and end up printing the error message - that last
wait is rather useless, and as the arbiter state isn't checked after
waiting, it could be that we had success during the last wait."
Suggested-by: Russell King <linux@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://lore.kernel.org/r/20240417205048.3542839-2-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: fa63c6434b6f ("net: dsa: vsc73xx: check busy flag in MDIO operations")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b9eebc2c7a5f0cc7950d918c1e8a4ad4bed5010 ]
In the 'vsc73xx_phy_write' function, the register value is missing,
and the phy write operation always sends zeros.
This commit passes the value variable into the proper register.
Fixes: 05bd97fc55 ("net: dsa: Add Vitesse VSC73xx DSA router driver")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ff2f816e2aa65ca9a1cdf0954842f8173c0f48d ]
In axiethernet header fix register defines comment description to be
inline with IP documentation. It updates MAC configuration register,
MDIO configuration register and frame filter control description.
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9a18e8f770c9b0703dab93580d0b02e199a4c79 ]
We can't dereference "skb" after calling vcc->push() because the skb
is released.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbc796be1779c4dbc9a482c7233995e2a8b6bfb3 ]
Previously, an ethtool rx flow with no attrs would not be added to the
NIC as it has no rules to configure the hw with, but it would be
reported as successful to the caller (return code 0). This is confusing
for the user as ethtool then reports "Added rule $num", but no rule was
actually added.
This change corrects that by instead reporting these wrong rules as
-EINVAL.
Fixes: b29c61dac3 ("net/mlx5e: Ethtool steering flow validation refactoring")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240808144107.2095424-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0afeaeb5dae86aceded0d5f0c3a54d27858c0c6f ]
Following the "igc: Fix TX Hang issue when QBV Gate is close" changes,
remaining issues with the reset adapter logic in igc_tsn_offload_apply()
have been observed:
1. The reset adapter logics for i225 and i226 differ, although they should
be the same according to the guidelines in I225/6 HW Design Section
7.5.2.1 on software initialization during tx mode changes.
2. The i225 resets adapter every time, even though tx mode doesn't change.
This occurs solely based on the condition igc_is_device_id_i225() when
calling schedule_work().
3. i226 doesn't reset adapter for tsn->legacy tx mode changes. It only
resets adapter for legacy->tsn tx mode transitions.
4. qbv_count introduced in the patch is actually not needed; in this
context, a non-zero value of qbv_count is used to indicate if tx mode
was unconditionally set to tsn in igc_tsn_enable_offload(). This could
be replaced by checking the existing register
IGC_TQAVCTRL_TRANSMIT_MODE_TSN bit.
This patch resolves all issues and enters schedule_work() to reset the
adapter only when changing tx mode. It also removes reliance on qbv_count.
qbv_count field will be removed in a future patch.
Test ran:
1. Verify reset adapter behaviour in i225/6:
a) Enrol a new GCL
Reset adapter observed (tx mode change legacy->tsn)
b) Enrol a new GCL without deleting qdisc
No reset adapter observed (tx mode remain tsn->tsn)
c) Delete qdisc
Reset adapter observed (tx mode change tsn->legacy)
2. Tested scenario from "igc: Fix TX Hang issue when QBV Gate is closed"
to confirm it remains resolved.
Fixes: 175c241288 ("igc: Fix TX Hang issue when QBV Gate is closed")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8d6acaee9d35cbff3c3cfad94641666c596f8da ]
When user issues these cmds:
1. Either a) or b)
a) mqprio with hardware offload disabled
b) taprio with txtime-assist feature enabled
2. etf
3. tc qdisc delete
4. taprio with base time in the past
At step 4, qbv_config_change_errors wrongly increased by 1.
Excerpt from IEEE 802.1Q-2018 8.6.9.3.1:
"If AdminBaseTime specifies a time in the past, and the current schedule
is running, then: Increment ConfigChangeError counter"
qbv_config_change_errors should only increase if base time is in the past
and no taprio is active. In user perspective, taprio was not active when
first triggered at step 4. However, i225/6 reuses qbv for etf, so qbv is
enabled with a dummy schedule at step 2 where it enters
igc_tsn_enable_offload() and qbv_count got incremented to 1. At step 4, it
enters igc_tsn_enable_offload() again, qbv_count is incremented to 2.
Because taprio is running, tc_setup_type is TC_SETUP_QDISC_ETF and
qbv_count > 1, qbv_config_change_errors value got incremented.
This issue happens due to reliance on qbv_count field where a non-zero
value indicates that taprio is running. But qbv_count increases
regardless if taprio is triggered by user or by other tsn feature. It does
not align with qbv_config_change_errors expectation where it is only
concerned with taprio triggered by user.
Fixing this by relocating the qbv_config_change_errors logic to
igc_save_qbv_schedule(), eliminating reliance on qbv_count and its
inaccuracies from i225/6's multiple uses of qbv feature for other TSN
features.
The new function created: igc_tsn_is_taprio_activated_by_user() uses
taprio_offload_enable field to indicate that the current running taprio
was triggered by user, instead of triggered by non-qbv feature like etf.
Fixes: ae4fe46983 ("igc: Add qbv_config_change_errors counter")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e037a26ead187901f83cad9c503ccece5ff6817a ]
Testing uncovered that even when the taprio gate is closed, some packets
still transmit.
According to i225/6 hardware errata [1], traffic might overflow the
planned QBV window. This happens because MAC maintains an internal buffer,
primarily for supporting half duplex retries. Therefore, even when the
gate closes, residual MAC data in the buffer may still transmit.
To mitigate this for i226, reduce the MAC's internal buffer from 192 bytes
to the recommended 88 bytes by modifying the RETX_CTL register value.
This follows guidelines from:
[1] Ethernet Controller I225/I22 Spec Update Rev 2.1 Errata Item 9:
TSN: Packet Transmission Might Cross Qbv Window
[2] I225/6 SW User Manual Rev 1.2.4: Section 8.11.5 Retry Buffer Control
Note that the RETX_CTL register can't be used in TSN mode because half
duplex feature cannot coexist with TSN.
Test Steps:
1. Send taprio cmd to board A:
tc qdisc replace dev enp1s0 parent root handle 100 taprio \
num_tc 4 \
map 3 2 1 0 3 3 3 3 3 3 3 3 3 3 3 3 \
queues 1@0 1@1 1@2 1@3 \
base-time 0 \
sched-entry S 0x07 500000 \
sched-entry S 0x0f 500000 \
flags 0x2 \
txtime-delay 0
Note that for TC3, gate should open for 500us and close for another
500us.
3. Take tcpdump log on Board B.
4. Send udp packets via UDP tai app from Board A to Board B.
5. Analyze tcpdump log via wireshark log on Board B. Ensure that the
total time from the first to the last packet received during one cycle
for TC3 does not exceed 500us.
Fixes: 4354621173 ("igc: Add new device ID's")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdad456cbcca739bae1849549c7a999857c56f88 ]
The commit f7866c358733 ("bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT")
fixed a NULL pointer dereference panic, but didn't fix the issue that
fails to update attached freplace prog to prog_array map.
Since commit 1c123c567f ("bpf: Resolve fext program type when checking map compatibility"),
freplace prog and its target prog are able to tail call each other.
And the commit 3aac1ead5e ("bpf: Move prog->aux->linked_prog and trampoline into bpf_link on attach")
sets prog->aux->dst_prog as NULL after attaching freplace prog to its
target prog.
After loading freplace the prog_array's owner type is BPF_PROG_TYPE_SCHED_CLS.
Then, after attaching freplace its prog->aux->dst_prog is NULL.
Then, while updating freplace in prog_array the bpf_prog_map_compatible()
incorrectly returns false because resolve_prog_type() returns
BPF_PROG_TYPE_EXT instead of BPF_PROG_TYPE_SCHED_CLS.
After this patch the resolve_prog_type() returns BPF_PROG_TYPE_SCHED_CLS
and update to prog_array can succeed.
Fixes: f7866c358733 ("bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT")
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20240728114612.48486-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cff59d8631e1409ffdd22d9d717e15810181b32c ]
The return value uv_set_shared() and uv_remove_shared() (which are
wrappers around the share() function) is not always checked. The system
integrity of a protected guest depends on the Share and Unshare UVCs
being successful. This means that any caller that fails to check the
return value will compromise the security of the protected guest.
No code path that would lead to such violation of the security
guarantees is currently exercised, since all the areas that are shared
never get unshared during the lifetime of the system. This might
change and become an issue in the future.
The Share and Unshare UVCs can only fail in case of hypervisor
misbehaviour (either a bug or malicious behaviour). In such cases there
is no reasonable way forward, and the system needs to panic.
This patch replaces the return at the end of the share() function with
a panic, to guarantee system integrity.
Fixes: 5abb9351df ("s390/uv: introduce guest side ultravisor code")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240801112548.85303-1-imbrenda@linux.ibm.com
Message-ID: <20240801112548.85303-1-imbrenda@linux.ibm.com>
[frankja@linux.ibm.com: Fixed up patch subject]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e6c6bd6253e792cee6c5c065e106e87b9f0d9ae9 upstream.
This needs to be set as well if the IB uses atomics.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c6c2e8b6a427d4fecc7c36cffccb908185afcab2)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e414a304f2c5368a84f03ad34d29b89f965a33c9 upstream.
This needs to be set as well if the IB uses atomics.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 35c628774e50b3784c59e8ca7973f03bcb067132)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 046667c4d3196938e992fba0dfcde570aa85cd0e upstream.
we are *not* guaranteed that anything past the terminating NUL
is mapped (let alone initialized with anything sane).
Fixes: 0dea116876 ("cgroup: implement eventfd-based generic API for notifications")
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0573a1e2ea7e35bff08944a40f1adf2bb35cea61 upstream.
Missing validation ...
Checked libdrm and it clears all the structs, so we should be
safe to just check everything.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c6b86421f1f9ddf9d706f2453159813ee39d0cf9)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 008e2512dc5696ab2dc5bf264e98a9fe9ceb830e upstream.
[REPORT]
There is a corruption report that btrfs refused to mount a fs that has
overlapping dev extents:
BTRFS error (device sdc): dev extent devid 4 physical offset 14263979671552 overlap with previous dev extent end 14263980982272
BTRFS error (device sdc): failed to verify dev extents against chunks: -117
BTRFS error (device sdc): open_ctree failed
[CAUSE]
The direct cause is very obvious, there is a bad dev extent item with
incorrect length.
With btrfs check reporting two overlapping extents, the second one shows
some clue on the cause:
ERROR: dev extent devid 4 offset 14263979671552 len 6488064 overlap with previous dev extent end 14263980982272
ERROR: dev extent devid 13 offset 2257707008000 len 6488064 overlap with previous dev extent end 2257707270144
ERROR: errors found in extent allocation tree or chunk allocation
The second one looks like a bitflip happened during new chunk
allocation:
hex(2257707008000) = 0x20da9d30000
hex(2257707270144) = 0x20da9d70000
diff = 0x00000040000
So it looks like a bitflip happened during new dev extent allocation,
resulting the second overlap.
Currently we only do the dev-extent verification at mount time, but if the
corruption is caused by memory bitflip, we really want to catch it before
writing the corruption to the storage.
Furthermore the dev extent items has the following key definition:
(<device id> DEV_EXTENT <physical offset>)
Thus we can not just rely on the generic key order check to make sure
there is no overlapping.
[ENHANCEMENT]
Introduce dedicated dev extent checks, including:
- Fixed member checks
* chunk_tree should always be BTRFS_CHUNK_TREE_OBJECTID (3)
* chunk_objectid should always be
BTRFS_FIRST_CHUNK_CHUNK_TREE_OBJECTID (256)
- Alignment checks
* chunk_offset should be aligned to sectorsize
* length should be aligned to sectorsize
* key.offset should be aligned to sectorsize
- Overlap checks
If the previous key is also a dev-extent item, with the same
device id, make sure we do not overlap with the previous dev extent.
Reported: Stefan N <stefannnau@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+W5K0rSO3koYTo=nzxxTm1-Pdu1HYgVxEpgJ=aGc7d=E8mGEg@mail.gmail.com/
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
