[ Upstream commit a104042e2bf6528199adb6ca901efe7b60c2c27f ]
The ieee80211 skb control block key (set when skb was queued) could have
been removed before ieee80211_tx_dequeue() call. ieee80211_tx_dequeue()
already called ieee80211_tx_h_select_key() to get the current key, but
the latter do not update the key in skb control block in case it is
NULL. Because some drivers actually use this key in their TX callbacks
(e.g. ath1{1,2}k_mac_op_tx()) this could lead to the use after free
below:
BUG: KASAN: slab-use-after-free in ath11k_mac_op_tx+0x590/0x61c
Read of size 4 at addr ffffff803083c248 by task kworker/u16:4/1440
CPU: 3 UID: 0 PID: 1440 Comm: kworker/u16:4 Not tainted 6.13.0-ge128f627f404 #2
Hardware name: HW (DT)
Workqueue: bat_events batadv_send_outstanding_bcast_packet
Call trace:
show_stack+0x14/0x1c (C)
dump_stack_lvl+0x58/0x74
print_report+0x164/0x4c0
kasan_report+0xac/0xe8
__asan_report_load4_noabort+0x1c/0x24
ath11k_mac_op_tx+0x590/0x61c
ieee80211_handle_wake_tx_queue+0x12c/0x1c8
ieee80211_queue_skb+0xdcc/0x1b4c
ieee80211_tx+0x1ec/0x2bc
ieee80211_xmit+0x224/0x324
__ieee80211_subif_start_xmit+0x85c/0xcf8
ieee80211_subif_start_xmit+0xc0/0xec4
dev_hard_start_xmit+0xf4/0x28c
__dev_queue_xmit+0x6ac/0x318c
batadv_send_skb_packet+0x38c/0x4b0
batadv_send_outstanding_bcast_packet+0x110/0x328
process_one_work+0x578/0xc10
worker_thread+0x4bc/0xc7c
kthread+0x2f8/0x380
ret_from_fork+0x10/0x20
Allocated by task 1906:
kasan_save_stack+0x28/0x4c
kasan_save_track+0x1c/0x40
kasan_save_alloc_info+0x3c/0x4c
__kasan_kmalloc+0xac/0xb0
__kmalloc_noprof+0x1b4/0x380
ieee80211_key_alloc+0x3c/0xb64
ieee80211_add_key+0x1b4/0x71c
nl80211_new_key+0x2b4/0x5d8
genl_family_rcv_msg_doit+0x198/0x240
<...>
Freed by task 1494:
kasan_save_stack+0x28/0x4c
kasan_save_track+0x1c/0x40
kasan_save_free_info+0x48/0x94
__kasan_slab_free+0x48/0x60
kfree+0xc8/0x31c
kfree_sensitive+0x70/0x80
ieee80211_key_free_common+0x10c/0x174
ieee80211_free_keys+0x188/0x46c
ieee80211_stop_mesh+0x70/0x2cc
ieee80211_leave_mesh+0x1c/0x60
cfg80211_leave_mesh+0xe0/0x280
cfg80211_leave+0x1e0/0x244
<...>
Reset SKB control block key before calling ieee80211_tx_h_select_key()
to avoid that.
Fixes: bb42f2d13f ("mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://patch.msgid.link/06aa507b853ca385ceded81c18b0a6dd0f081bc8.1742833382.git.repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27c7e63b3cb1a20bb78ed4a36c561ea4579fd7da ]
The memory pointed to by priv is freed at the end of at76_delete_device
function (using ieee80211_free_hw). But the code then accesses the udev
field of the freed object to put the USB device. This may also lead to a
memory leak of the usb device. Fix this by using udev from interface.
Fixes: 29e20aa6c6 ("at76c50x-usb: fix use after free on failure path in at76_probe()")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Link: https://patch.msgid.link/20250330103110.44080-1-abdun.nihaal@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8aa580cd92843b60d4d6331f3b0a9e8409bb70eb ]
when a SATA disk is directly connected the SAS controller determines the
disk to which I/Os are delivered based on the port ID in the DQ entry.
When many phys are disconnected and reconnect, the port ID of phys were
changed and used by other link, resulting in I/O being sent to incorrect
disk. Data inconsistency on the SATA disk may occur during I/O retries
using the old port ID. So enable force phy, then force the command to be
executed in a certain phy, and if the actual phy ID of the port does not
match the phy configured in the command, the chip will stop delivering the
I/O to disk.
Fixes: ce60689e12 ("scsi: hisi_sas: add v3 code to send ATA frame")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Link: https://lore.kernel.org/r/20250312095135.3048379-2-yangxingui@huawei.com
Reviewed-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e3f88665a78045fe35c7669d2926b8d97b892c11 upstream.
In the ssi_protocol_probe() function, &ssi->work is bound with
ssip_xmit_work(), In ssip_pn_setup(), the ssip_pn_xmit() function
within the ssip_pn_ops structure is capable of starting the
work.
If we remove the module which will call ssi_protocol_remove()
to make a cleanup, it will free ssi through kfree(ssi),
while the work mentioned above will be used. The sequence
of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| ssip_xmit_work
ssi_protocol_remove |
kfree(ssi); |
| struct hsi_client *cl = ssi->cl;
| // use ssi
Fix it by ensuring that the work is canceled before proceeding
with the cleanup in ssi_protocol_remove().
Signed-off-by: Kaixin Wang <kxwang23@m.fudan.edu.cn>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240918120749.1730-1-kxwang23@m.fudan.edu.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5df5dafc171b90d0b8d51547a82657cd5a1986c7 upstream.
Do not set 'HCI_UART_PROTO_READY' before call 'hci_uart_register_dev()'.
Possible race is when someone calls 'hci_tty_uart_close()' after this bit
is set, but 'hci_uart_register_dev()' wasn't done. This leads to access
to uninitialized fields. To fix it let's set this bit after device was
registered (as before patch c411c62cc133) and to fix previous problem let's
add one more bit in addition to 'HCI_UART_PROTO_READY' which allows to
perform power up without original bit set (pls see commit c411c62cc133).
Crash backtrace from syzbot report:
RIP: 0010:skb_queue_empty_lockless include/linux/skbuff.h:1887 [inline]
RIP: 0010:skb_queue_purge_reason+0x6d/0x140 net/core/skbuff.c:3936
Call Trace:
<TASK>
skb_queue_purge include/linux/skbuff.h:3364 [inline]
mrvl_close+0x2f/0x90 drivers/bluetooth/hci_mrvl.c:100
hci_uart_tty_close+0xb6/0x120 drivers/bluetooth/hci_ldisc.c:557
tty_ldisc_close drivers/tty/tty_ldisc.c:455 [inline]
tty_ldisc_kill+0x66/0xc0 drivers/tty/tty_ldisc.c:613
tty_ldisc_release+0xc9/0x120 drivers/tty/tty_ldisc.c:781
tty_release_struct+0x10/0x80 drivers/tty/tty_io.c:1690
tty_release+0x4ef/0x640 drivers/tty/tty_io.c:1861
__fput+0x86/0x2a0 fs/file_table.c:450
task_work_run+0x82/0xb0 kernel/task_work.c:239
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0xa3/0x1b0 kernel/entry/common.c:218
do_syscall_64+0x9a/0x190 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reported-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com
Tested-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/d159c57f-8490-4c26-79da-6ad3612c4a14@salutedevices.com/
Fixes: 366ceff495f9 ("Bluetooth: hci_uart: fix race during initialization")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b55f8818900c99dd4f55a59a103f5b29e41eb2c upstream.
With KASAN enabled, clang fails to optimize the inline version of
vdec_vp9_slice_map_counts_eob_coef() properly, leading to kilobytes
of temporary values spilled to the stack:
drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c:1526:12: error: stack frame size (2160) exceeds limit (2048) in 'vdec_vp9_slice_update_prob' [-Werror,-Wframe-larger-than]
This seems to affect all versions of clang including the latest (clang-20),
but the degree of stack overhead is different per release.
Marking the function as noinline_for_stack is harmless here and avoids
the problem completely.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2f29da9f0d4367f6ff35e0d9d021257bb53e273 upstream.
While debugging kexec/hibernation hangs and crashes, it turned out that
the current implementation of e820__register_nosave_regions() suffers from
multiple serious issues:
- The end of last region is tracked by PFN, causing it to find holes
that aren't there if two consecutive subpage regions are present
- The nosave PFN ranges derived from holes are rounded out (instead of
rounded in) which makes it inconsistent with how explicitly reserved
regions are handled
Fix this by:
- Treating reserved regions as if they were holes, to ensure consistent
handling (rounding out nosave PFN ranges is more correct as the
kernel does not use partial pages)
- Tracking the end of the last RAM region by address instead of pages
to detect holes more precisely
These bugs appear to have been introduced about ~18 years ago with the very
first version of e820_mark_nosave_regions(), and its flawed assumptions were
carried forward uninterrupted through various waves of rewrites and renames.
[ mingo: Added Git archeology details, for kicks and giggles. ]
Fixes: e8eff5ac29 ("[PATCH] Make swsusp avoid memory holes and reserved memory regions on x86_64")
Reported-by: Roberto Ricci <io@r-ricci.it>
Tested-by: Roberto Ricci <io@r-ricci.it>
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250406-fix-e820-nosave-v3-1-f3787bc1ee1d@qtmlabs.xyz
Closes: https://lore.kernel.org/all/Z4WFjBVHpndct7br@desktop0a/
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55c85fa7579dc2e3f5399ef5bad67a44257c1a48 upstream.
The current implementation of iommufd_device_do_replace() implicitly
assumes that the input device has already been attached. However, there
is no explicit check to verify this assumption. If another device within
the same group has been attached, the replace operation might succeed,
but the input device itself may not have been attached yet.
As a result, the input device might not be tracked in the
igroup->device_list, and its reserved IOVA might not be added. Despite
this, the caller might incorrectly assume that the device has been
successfully replaced, which could lead to unexpected behavior or errors.
To address this issue, add a check to ensure that the input device has
been attached before proceeding with the replace operation. This check
will help maintain the integrity of the device tracking system and prevent
potential issues arising from incorrect assumptions about the device's
attachment status.
Fixes: e88d4ec154 ("iommufd: Add iommufd_device_replace()")
Link: https://patch.msgid.link/r/20250306034842.5950-1-yi.l.liu@intel.com
Cc: stable@vger.kernel.org
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd4f730b557ce701a2cd4f604bf1e57667bd8b6e upstream.
When an attribute group is created with sysfs_create_group(), the
->sysfs_ops() callback is set to kobj_sysfs_ops, which sets the ->show()
and ->store() callbacks to kobj_attr_show() and kobj_attr_store()
respectively. These functions use container_of() to get the respective
callback from the passed attribute, meaning that these callbacks need to
be of the same type as the callbacks in 'struct kobj_attribute'.
However, ->show() and ->store() in the platform_profile driver are
defined for struct device_attribute with the help of DEVICE_ATTR_RO()
and DEVICE_ATTR_RW(), which results in a CFI violation when accessing
platform_profile or platform_profile_choices under /sys/firmware/acpi
because the types do not match:
CFI failure at kobj_attr_show+0x19/0x30 (target: platform_profile_choices_show+0x0/0x140; expected type: 0x7a69590c)
There is no functional issue from the type mismatch because the layout
of 'struct kobj_attribute' and 'struct device_attribute' are the same,
so the container_of() cast does not break anything aside from CFI.
Change the type of platform_profile_choices_show() and
platform_profile_{show,store}() to match the callbacks in
'struct kobj_attribute' and update the attribute variables to
match, which resolves the CFI violation.
Cc: All applicable <stable@vger.kernel.org>
Fixes: a2ff95e018 ("ACPI: platform: Add platform profile support")
Reported-by: John Rowley <lkml@johnrowley.me>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2047
Tested-by: John Rowley <lkml@johnrowley.me>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20250210-acpi-platform_profile-fix-cfi-violation-v3-1-ed9e9901c33a@kernel.org
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[nathan: Fix conflicts in older stable branches]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e225128c3f8be879e7d4eb71a25949e188b420ae upstream.
When submitting the TLMM test driver, Bjorn reported that some of the test
cases are failing for GPIOs that not are backed by PDC (i.e. "non-wakeup"
GPIOs that are handled directly in pinctrl-msm). Basically, lingering
latched interrupt state is still being delivered at IRQ request time, e.g.:
ok 1 tlmm_test_silent_rising
tlmm_test_silent_falling: ASSERTION FAILED at drivers/pinctrl/qcom/tlmm-test.c:178
Expected atomic_read(&priv->intr_count) == 0, but
atomic_read(&priv->intr_count) == 1 (0x1)
not ok 2 tlmm_test_silent_falling
tlmm_test_silent_low: ASSERTION FAILED at drivers/pinctrl/qcom/tlmm-test.c:178
Expected atomic_read(&priv->intr_count) == 0, but
atomic_read(&priv->intr_count) == 1 (0x1)
not ok 3 tlmm_test_silent_low
ok 4 tlmm_test_silent_high
Whether to report interrupts that came in while the IRQ was unclaimed
doesn't seem to be well-defined in the Linux IRQ API. However, looking
closer at these specific cases, we're actually reporting events that do not
match the interrupt type requested by the driver:
1. After "ok 1 tlmm_test_silent_rising", the GPIO is in low state and
configured for IRQF_TRIGGER_RISING.
2. (a) In preparation for "tlmm_test_silent_falling", the GPIO is switched
to high state. The rising interrupt gets latched.
(b) The GPIO is re-configured for IRQF_TRIGGER_FALLING, but the latched
interrupt isn't cleared.
(c) The IRQ handler is called for the latched interrupt, but there
wasn't any falling edge.
3. (a) For "tlmm_test_silent_low", the GPIO remains in high state.
(b) The GPIO is re-configured for IRQF_TRIGGER_LOW. This seems to
result in a phantom interrupt that gets latched.
(c) The IRQ handler is called for the latched interrupt, but the GPIO
isn't in low state.
4. (a) For "tlmm_test_silent_high", the GPIO is switched to low state.
(b) This doesn't result in a latched interrupt, because RAW_STATUS_EN
was cleared when masking the level-triggered interrupt.
Fix this by clearing the interrupt state whenever making any changes to the
interrupt configuration. This includes previously disabled interrupts, but
also any changes to interrupt polarity or detection type.
With this change, all 16 test cases are now passing for the non-wakeup
GPIOs in the TLMM.
Cc: stable@vger.kernel.org
Fixes: cf9d052aa6 ("pinctrl: qcom: Don't clear pending interrupts when enabling")
Reported-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Closes: https://lore.kernel.org/r/20250227-tlmm-test-v1-1-d18877b4a5db@oss.qualcomm.com/
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/20250312-pinctrl-msm-type-latch-v1-1-ce87c561d3d7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aecb63e88c5e5fb9afb782a1577264c76f179af9 upstream.
Ensure the PHY reset and perst is asserted during power-off to
guarantee it is in a reset state upon repeated power-on calls. This
resolves an issue where the PHY may not properly initialize during
subsequent power-on cycles. Power-on will deassert the reset at the
appropriate time after tuning the PHY parameters.
During suspend/resume cycles, we observed that the PHY PLL failed to
lock during resume when the CPU temperature increased from 65C to 75C.
The observed errors were:
phy phy-32f00000.pcie-phy.3: phy poweron failed --> -110
imx6q-pcie 33800000.pcie: waiting for PHY ready timeout!
imx6q-pcie 33800000.pcie: PM: dpm_run_callback(): genpd_resume_noirq+0x0/0x80 returns -110
imx6q-pcie 33800000.pcie: PM: failed to resume noirq: error -110
This resulted in a complete CPU freeze, which is resolved by ensuring
the PHY is in reset during power-on, thus preventing PHY PLL failures.
Cc: stable@vger.kernel.org
Fixes: 1aa97b0022 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250305144355.20364-3-eichest@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2df181e1aea4628a8fd257f866026625d0519627 upstream.
A call to of_parse_phandle() is incrementing the refcount, and as such,
the of_node_put() must be called when the reference is no longer needed.
Thus, refactor the existing code and add a missing of_node_put() call
following the check to ensure that "msi_np" matches "pcie->np" and after
MSI initialization, but only if the MSI support is enabled system-wide.
Cc: stable@vger.kernel.org # v5.10+
Fixes: 40ca1bf580 ("PCI: brcmstb: Add MSI support")
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250122222955.1752778-1-svarbanov@suse.de
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 708124d9e6e7ac5ebf927830760679136b23fdf0 upstream.
of_irq_init() will leak interrupt controller device node refcounts
in two places as explained below:
1) Leak refcounts of both @desc->dev and @desc->interrupt_parent when
suffers @desc->irq_init_cb() failure.
2) Leak refcount of @desc->interrupt_parent when cleans up list
@intc_desc_list in the end.
Refcounts of both @desc->dev and @desc->interrupt_parent were got in
the first loop, but of_irq_init() does not put them before kfree(@desc)
in places mentioned above, so causes refcount leakages.
Fix by putting refcounts involved before kfree(@desc).
Fixes: 8363ccb917 ("of/irq: add missing of_node_put")
Fixes: c71a54b082 ("of/irq: introduce of_irq_init")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-7-93e3a2659aa7@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bbf71f44aaf241d853759a71de7e7ebcdb89be3d upstream.
of_irq_count() invokes of_irq_parse_one() to count IRQs, and successful
invocation of the later will get device node @irq.np refcount, but the
former does not put the refcount before next iteration invocation, hence
causes device node refcount leakages.
Fix by putting @irq.np refcount before the next iteration invocation.
Fixes: 3da5278727 ("of/irq: Rework of_irq_count()")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-5-93e3a2659aa7@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff93e7213d6cc8d9a7b0bc64f70ed26094e168f3 upstream.
if the node @out_irq->np got by of_irq_parse_raw() is a combo node which
consists of both controller and nexus, namely, of_irq_parse_raw() returns
due to condition (@ipar == @newpar), then the node's refcount was increased
twice, hence causes refcount leakage.
Fix by putting @out_irq->np refcount before returning due to the condition.
Also add comments about refcount of node @out_irq->np got by the API.
Fixes: 0412841812 ("of/irq: Allow matching of an interrupt-map local to an interrupt controller")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-4-93e3a2659aa7@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0cb58d6c7b558a69957fabe159bfb184196e1e8d upstream.
of_irq_parse_one(@int_gen_dev, i, ...) will leak refcount of @i_th_phandle
int_gen_dev {
...
interrupts-extended = ..., <&i_th_phandle ...>, ...;
...
};
Refcount of @i_th_phandle is increased by of_parse_phandle_with_args()
but is not decreased by API of_irq_parse_one() before return, so causes
refcount leakage.
Rework the refcounting to use __free() cleanup and simplify the code to
have a single call to of_irq_parse_raw().
Also add comments about refcount of node @out_irq->np got by the API.
Fixes: 79d9701559 ("of/irq: create interrupts-extended property")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-2-93e3a2659aa7@quicinc.com
[robh: Use __free() to do puts]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd5625fc86922f36bedee5846fefd647b7e72751 upstream.
msi_db_mask is of type 'u64', still the standard 'int' arithmetic is
performed to compute its value.
While most of the ntb_hw drivers actually don't utilize the higher 32
bits of the doorbell mask now, this may be the case for Switchtec - see
switchtec_ntb_init_db().
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Fixes: 2b0569b3b7 ("NTB: Add MSI interrupt support to ntb_transport")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef01cac401f18647d62720cf773d7bb0541827da upstream.
Acquire a lock on kvm->srcu when userspace is getting MP state to handle a
rather extreme edge case where "accepting" APIC events, i.e. processing
pending INIT or SIPI, can trigger accesses to guest memory. If the vCPU
is in L2 with INIT *and* a TRIPLE_FAULT request pending, then getting MP
state will trigger a nested VM-Exit by way of ->check_nested_events(), and
emuating the nested VM-Exit can access guest memory.
The splat was originally hit by syzkaller on a Google-internal kernel, and
reproduced on an upstream kernel by hacking the triple_fault_event_test
selftest to stuff a pending INIT, store an MSR on VM-Exit (to generate a
memory access on VMX), and do vcpu_mp_state_get() to trigger the scenario.
=============================
WARNING: suspicious RCU usage
6.14.0-rc3-b112d356288b-vmx/pi_lockdep_false_pos-lock #3 Not tainted
-----------------------------
include/linux/kvm_host.h:1058 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by triple_fault_ev/1256:
#0: ffff88810df5a330 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x8b/0x9a0 [kvm]
stack backtrace:
CPU: 11 UID: 1000 PID: 1256 Comm: triple_fault_ev Not tainted 6.14.0-rc3-b112d356288b-vmx #3
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0x90
lockdep_rcu_suspicious+0x144/0x190
kvm_vcpu_gfn_to_memslot+0x156/0x180 [kvm]
kvm_vcpu_read_guest+0x3e/0x90 [kvm]
read_and_check_msr_entry+0x2e/0x180 [kvm_intel]
__nested_vmx_vmexit+0x550/0xde0 [kvm_intel]
kvm_check_nested_events+0x1b/0x30 [kvm]
kvm_apic_accept_events+0x33/0x100 [kvm]
kvm_arch_vcpu_ioctl_get_mpstate+0x30/0x1d0 [kvm]
kvm_vcpu_ioctl+0x33e/0x9a0 [kvm]
__x64_sys_ioctl+0x8b/0xb0
do_syscall_64+0x6c/0x170
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250401150504.829812-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc52ae0a708cb6fa3926d11c88e3c55e1171b4a1 upstream.
Explicitly zero/empty-initialize the unions used for PMU related CPUID
entries, instead of manually zeroing all fields (hopefully), or in the
case of 0x80000022, relying on the compiler to clobber the uninitialized
bitfields.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-ID: <20250315024102.2361628-1-seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42ea22e754ba4f2b86f8760ca27f6f71da2d982c upstream.
When the kernel contains a large number of functions that can be traced,
the loop in ftrace_graph_set_hash() may take a lot of time to execute.
This may trigger the softlockup watchdog.
Add cond_resched() within the loop to allow the kernel to remain
responsive even when processing a large number of functions.
This matches the cond_resched() that is used in other locations of the
code that iterates over all functions that can be traced.
Cc: stable@vger.kernel.org
Fixes: b9b0c831be ("ftrace: Convert graph filter to use hash tables")
Link: https://lore.kernel.org/tencent_3E06CE338692017B5809534B9C5C03DA7705@qq.com
Signed-off-by: zhoumin <teczm@foxmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2de510fccbca3d1906b55f4be5f1de83fa2424ef upstream.
There's a possible race condition in dm-verity - the prefetch work item
may race with suspend and it is possible that prefetch continues to run
while the device is suspended. Fix this by calling flush_workqueue and
dm_bufio_client_reset in the postsuspend hook.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00204ae3d6712ee053353920e3ce2b00c35ef75b upstream.
The dm-integrity target didn't set the error string when memory
allocation failed. This patch fixes it.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c565428788fb9b49066f94ab7b10efc686a0a4c upstream.
There's a possible race condition in dm-ebs - dm bufio prefetch may be in
progress while the device is suspended. Fix this by calling
dm_bufio_client_reset in the postsuspend hook.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07bb097b92b987db518e72525b515d77904e966e upstream.
Currently, the ASP primary device check does not have support for PCI
domains, and, as a result, when the system is configured with PCI domains
(PCI segments) the wrong device can be selected as primary. This results
in commands submitted to the device timing out and failing. The device
check also relies on specific device and function assignments that may
not hold in the future.
Fix the primary ASP device check to include support for PCI domains and
to perform proper checking of the Bus/Device/Function positions.
Fixes: 2a6170dfe7 ("crypto: ccp: Add Platform Security Processor (PSP) device support")
Cc: stable@vger.kernel.org
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5eac348182d2b5ed1066459abedb7bc6b5466f81 upstream.
BRANCH_HALT_ENABLE and BRANCH_HALT_ENABLE_VOTED flags are used to check
halt status of branch clocks, which have an inverted logic for the halt
bit in CBCR register. However, the current logic in the _check_halt()
method only compares the BRANCH_HALT_ENABLE flags, ignoring the votable
branch clocks.
Update the logic to correctly handle the invert logic for votable clocks
using the BRANCH_HALT_ENABLE_VOTED flags.
Fixes: 9092d1083a ("clk: qcom: branch: Extend the invert logic for branch2 clocks")
Cc: stable@vger.kernel.org
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250128-push_fix-v1-1-fafec6747881@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f8a394aa952257575910d57cf0a63627fa949a2 upstream.
Fix regression in mounts to e.g. onedrive shares.
Generally, reparse points are processed by the SMB server during the
SMB OPEN request, but there are few reparse points which do not have
OPEN-like meaning for the SMB server and has to be processed by the SMB
client. Those are symlinks and special files (fifo, socket, block, char).
For Linux SMB client, it is required to process also name surrogate reparse
points as they represent another entity on the SMB server system. Linux
client will mark them as separate mount points. Examples of name surrogate
reparse points are NTFS junction points (e.g. created by the "mklink" tool
on Windows servers).
So after processing the name surrogate reparse points, clear the
-EOPNOTSUPP error code returned from the parse_reparse_point() to let SMB
server to process reparse points.
And remove printing misleading error message "unhandled reparse tag:" as
reparse points are handled by SMB server and hence unhandled fact is normal
operation.
Fixes: cad3fc0a4c8c ("cifs: Throw -EOPNOTSUPP error on unsupported reparse point type from parse_reparse_point()")
Fixes: b587fd128660 ("cifs: Treat unhandled directory name surrogate reparse points as mount directory nodes")
Cc: stable@vger.kernel.org
Reported-by: Junwen Sun <sunjw8888@gmail.com>
Tested-by: Junwen Sun <sunjw8888@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2510859475d7f46ed7940db0853f3342bf1b65ee upstream.
The echo_interval is not limited in any way during mounting,
which makes it possible to write a large number to it. This can
cause an overflow when multiplying ctx->echo_interval by HZ in
match_server().
Add constraints for echo_interval to smb3_fs_context_parse_param().
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: adfeb3e00e ("cifs: Make echo interval tunable")
Cc: stable@vger.kernel.org
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4885bd5935bb26f0a414ad55679a372e53f9b9b upstream.
cifs_server_dbg() implies server to be non-NULL so
move call under condition to avoid NULL pointer dereference.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e79b0332ae ("cifs: ignore cached share root handle closing errors")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee022e5cae052e0c67ca7c5fec0f2e7bc897c70e upstream.
The mapping table for the rk3328 is missing the entry for -25C which is
found in the TRM section 9.5.2 "Temperature-to-code mapping".
NOTE: the kernel uses the tsadc_q_sel=1'b1 mode which is defined as:
4096-<code in table>. Whereas the table in the TRM gives the code
"3774" for -25C, the kernel uses 4096-3774=322.
[Dragan Simic] : "After going through the RK3308 and RK3328 TRMs, as
well as through the downstream kernel code, it seems we may have
some troubles at our hands. Let me explain, please.
To sum it up, part 1 of the RK3308 TRM v1.1 says on page 538 that
the equation for the output when tsadc_q_sel equals 1 is (4096 -
tsadc_q), while part 1 of the RK3328 TRM v1.2 says that the output
equation is (1024 - tsadc_q) in that case.
The downstream kernel code, however, treats the RK3308 and RK3328
tables and their values as being the same. It even mentions 1024 as
the "offset" value in a comment block for the rk_tsadcv3_control()
function, just like the upstream code does, which is obviously wrong
"offset" value when correlated with the table on page 544 of part 1
of the RK3308 TRM v1.1.
With all this in mind, it's obvious that more work is needed to make
it clear where's the actual mistake (it could be that the TRM is
wrong), which I'll volunteer for as part of the SoC binning project.
In the meantime, this patch looks fine as-is to me, by offering
what's a clear improvement to the current state of the upstream
code"
Link: https://opensource.rock-chips.com/images/9/97/Rockchip_RK3328TRM_V1.1-Part1-20170321.pdf
Cc: stable@vger.kernel.org
Fixes: eda519d5f7 ("thermal: rockchip: Support the RK3328 SOC in thermal driver")
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250207175048.35959-1-twoerner@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e1a453a57bc76be678bd746f84e3d73f378a9511 upstream.
The following causes a vsnprintf fault:
# echo 's:wake_lat char[] wakee; u64 delta;' >> /sys/kernel/tracing/dynamic_events
# echo 'hist:keys=pid:ts=common_timestamp.usecs if !(common_flags & 0x18)' > /sys/kernel/tracing/events/sched/sched_waking/trigger
# echo 'hist:keys=next_pid:delta=common_timestamp.usecs-$ts:onmatch(sched.sched_waking).trace(wake_lat,next_comm,$delta)' > /sys/kernel/tracing/events/sched/sched_switch/trigger
Because the synthetic event's "wakee" field is created as a dynamic string
(even though the string copied is not). The print format to print the
dynamic string changed from "%*s" to "%s" because another location
(__set_synth_event_print_fmt()) exported this to user space, and user
space did not need that. But it is still used in print_synth_event(), and
the output looks like:
<idle>-0 [001] d..5. 193.428167: wake_lat: wakee=(efault)sshd-sessiondelta=155
sshd-session-879 [001] d..5. 193.811080: wake_lat: wakee=(efault)kworker/u34:5delta=58
<idle>-0 [002] d..5. 193.811198: wake_lat: wakee=(efault)bashdelta=91
bash-880 [002] d..5. 193.811371: wake_lat: wakee=(efault)kworker/u35:2delta=21
<idle>-0 [001] d..5. 193.811516: wake_lat: wakee=(efault)sshd-sessiondelta=129
sshd-session-879 [001] d..5. 193.967576: wake_lat: wakee=(efault)kworker/u34:5delta=50
The length isn't needed as the string is always nul terminated. Just print
the string and not add the length (which was hard coded to the max string
length anyway).
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250407154139.69955768@gandalf.local.home
Fixes: 4d38328eb442d ("tracing: Fix synth event printk format for str fields");
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87af633689ce16ddb166c80f32b120e50b1295de upstream.
PVH dom0 re-uses logic from PV dom0, in which RAM ranges not assigned to
dom0 are re-used as scratch memory to map foreign and grant pages. Such
logic relies on reporting those unpopulated ranges as RAM to Linux, and
mark them as reserved. This way Linux creates the underlying page
structures required for metadata management.
Such approach works fine on PV because the initial balloon target is
calculated using specific Xen data, that doesn't take into account the
memory type changes described above. However on HVM and PVH the initial
balloon target is calculated using get_num_physpages(), and that function
does take into account the unpopulated RAM regions used as scratch space
for remote domain mappings.
This leads to PVH dom0 having an incorrect initial balloon target, which
causes malfunction (excessive memory freeing) of the balloon driver if the
dom0 memory target is later adjusted from the toolstack.
Fix this by using xen_released_pages to account for any pages that are part
of the memory map, but are already unpopulated when the balloon driver is
initialized. This accounts for any regions used for scratch remote
mappings. Note on x86 xen_released_pages definition is moved to
enlighten.c so it's uniformly available for all Xen-enabled builds.
Take the opportunity to unify PV with PVH/HVM guests regarding the usage of
get_num_physpages(), as that avoids having to add different logic for PV vs
PVH in both balloon_add_regions() and arch_xen_unpopulated_init().
Much like a6aa4eb994ee, the code in this changeset should have been part of
38620fc4e893.
Fixes: a6aa4eb994ee ('xen/x86: add extra pages to unpopulated-alloc if available')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250407082838.65495-1-roger.pau@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1a69a940de58b16e8249dff26f74c8cc59b32be upstream.
sctp_sendmsg() re-uses associations and transports when possible by
doing a lookup based on the socket endpoint and the message destination
address, and then sctp_sendmsg_to_asoc() sets the selected transport in
all the message chunks to be sent.
There's a possible race condition if another thread triggers the removal
of that selected transport, for instance, by explicitly unbinding an
address with setsockopt(SCTP_SOCKOPT_BINDX_REM), after the chunks have
been set up and before the message is sent. This can happen if the send
buffer is full, during the period when the sender thread temporarily
releases the socket lock in sctp_wait_for_sndbuf().
This causes the access to the transport data in
sctp_outq_select_transport(), when the association outqueue is flushed,
to result in a use-after-free read.
This change avoids this scenario by having sctp_transport_free() signal
the freeing of the transport, tagging it as "dead". In order to do this,
the patch restores the "dead" bit in struct sctp_transport, which was
removed in
commit 47faa1e4c5 ("sctp: remove the dead field of sctp_transport").
Then, in the scenario where the sender thread has released the socket
lock in sctp_wait_for_sndbuf(), the bit is checked again after
re-acquiring the socket lock to detect the deletion. This is done while
holding a reference to the transport to prevent it from being freed in
the process.
If the transport was deleted while the socket lock was relinquished,
sctp_sendmsg_to_asoc() will return -EAGAIN to let userspace retry the
send.
The bug was found by a private syzbot instance (see the error report [1]
and the C reproducer that triggers it [2]).
Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport.txt [1]
Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport__repro.c [2]
Cc: stable@vger.kernel.org
Fixes: df132eff46 ("sctp: clear the transport of some out_chunk_list chunks in sctp_assoc_rm_peer")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250404-kasan_slab-use-after-free_read_in_sctp_outq_select_transport__20250404-v1-1-5ce4a0b78ef2@igalia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
