[ Upstream commit 570f94511766f9236d3462dfb8a3c719c2b54c23 ]
Lockdep gives a splat [1] when ser_hdl_work item is executed. It is
scheduled at mac80211 workqueue via ieee80211_queue_work() and takes a
wiphy lock inside. However, this workqueue can be flushed when e.g.
closing the interface and wiphy lock is already taken in that case.
Choosing wiphy_work_queue() for SER is likely not suitable. Back on to
the global workqueue.
[1]:
WARNING: possible circular locking dependency detected
6.17.0-rc2 #17 Not tainted
------------------------------------------------------
kworker/u32:1/61 is trying to acquire lock:
ffff88811bc00768 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ser_state_run+0x5e/0x180 [rtw89_core]
but task is already holding lock:
ffffc9000048fd30 ((work_completion)(&ser->ser_hdl_work)){+.+.}-{0:0}, at: process_one_work+0x7b5/0x1450
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 ((work_completion)(&ser->ser_hdl_work)){+.+.}-{0:0}:
process_one_work+0x7c6/0x1450
worker_thread+0x49e/0xd00
kthread+0x313/0x640
ret_from_fork+0x221/0x300
ret_from_fork_asm+0x1a/0x30
-> #1 ((wq_completion)phy0){+.+.}-{0:0}:
touch_wq_lockdep_map+0x8e/0x180
__flush_workqueue+0x129/0x10d0
ieee80211_stop_device+0xa8/0x110
ieee80211_do_stop+0x14ce/0x2880
ieee80211_stop+0x13a/0x2c0
__dev_close_many+0x18f/0x510
__dev_change_flags+0x25f/0x670
netif_change_flags+0x7b/0x160
do_setlink.isra.0+0x1640/0x35d0
rtnl_newlink+0xd8c/0x1d30
rtnetlink_rcv_msg+0x700/0xb80
netlink_rcv_skb+0x11d/0x350
netlink_unicast+0x49a/0x7a0
netlink_sendmsg+0x759/0xc20
____sys_sendmsg+0x812/0xa00
___sys_sendmsg+0xf7/0x180
__sys_sendmsg+0x11f/0x1b0
do_syscall_64+0xbb/0x360
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (&rdev->wiphy.mtx){+.+.}-{4:4}:
__lock_acquire+0x124c/0x1d20
lock_acquire+0x154/0x2e0
__mutex_lock+0x17b/0x12f0
ser_state_run+0x5e/0x180 [rtw89_core]
rtw89_ser_hdl_work+0x119/0x220 [rtw89_core]
process_one_work+0x82d/0x1450
worker_thread+0x49e/0xd00
kthread+0x313/0x640
ret_from_fork+0x221/0x300
ret_from_fork_asm+0x1a/0x30
other info that might help us debug this:
Chain exists of:
&rdev->wiphy.mtx --> (wq_completion)phy0 --> (work_completion)(&ser->ser_hdl_work)
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock((work_completion)(&ser->ser_hdl_work));
lock((wq_completion)phy0);
lock((work_completion)(&ser->ser_hdl_work));
lock(&rdev->wiphy.mtx);
*** DEADLOCK ***
2 locks held by kworker/u32:1/61:
#0: ffff888103835148 ((wq_completion)phy0){+.+.}-{0:0}, at: process_one_work+0xefa/0x1450
#1: ffffc9000048fd30 ((work_completion)(&ser->ser_hdl_work)){+.+.}-{0:0}, at: process_one_work+0x7b5/0x1450
stack backtrace:
CPU: 0 UID: 0 PID: 61 Comm: kworker/u32:1 Not tainted 6.17.0-rc2 #17 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS edk2-20250523-14.fc42 05/23/2025
Workqueue: phy0 rtw89_ser_hdl_work [rtw89_core]
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
print_circular_bug.cold+0x178/0x1be
check_noncircular+0x14c/0x170
__lock_acquire+0x124c/0x1d20
lock_acquire+0x154/0x2e0
__mutex_lock+0x17b/0x12f0
ser_state_run+0x5e/0x180 [rtw89_core]
rtw89_ser_hdl_work+0x119/0x220 [rtw89_core]
process_one_work+0x82d/0x1450
worker_thread+0x49e/0xd00
kthread+0x313/0x640
ret_from_fork+0x221/0x300
ret_from_fork_asm+0x1a/0x30
</TASK>
Found by Linux Verification Center (linuxtesting.org).
Fixes: ebfc9199df05 ("wifi: rtw89: add wiphy_lock() to work that isn't held wiphy_lock() yet")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250919210852.823912-5-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ca7eada62fcfabf6ec1dc7468941e791c1d8729 ]
When do_task() exhausts its iteration budget (!ret), it sets the state
to TASK_STATE_IDLE to reschedule, without a secondary check on the
current task->state. This can overwrite the TASK_STATE_DRAINING state
set by a concurrent call to rxe_cleanup_task() or rxe_disable_task().
While state changes are protected by a spinlock, both rxe_cleanup_task()
and rxe_disable_task() release the lock while waiting for the task to
finish draining in the while(!is_done(task)) loop. The race occurs if
do_task() hits its iteration limit and acquires the lock in this window.
The cleanup logic may then proceed while the task incorrectly
reschedules itself, leading to a potential use-after-free.
This bug was introduced during the migration from tasklets to workqueues,
where the special handling for the draining case was lost.
Fix this by restoring the original pre-migration behavior. If the state is
TASK_STATE_DRAINING when iterations are exhausted, set cont to 1 to
force a new loop iteration. This allows the task to finish its work, so
that a subsequent iteration can reach the switch statement and correctly
transition the state to TASK_STATE_DRAINED, stopping the task as intended.
Fixes: 9b4b7c1f9f ("RDMA/rxe: Add workqueue support for rxe tasks")
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://patch.msgid.link/20250919025212.1682087-1-hanguidong02@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0cafb02de883b3b413d34eb079c9680782a9cc1 ]
When the initialization of qm->debug.acc_diff_reg fails,
the probe process does not exit. However, after qm->debug.qm_diff_regs is
freed, it is not set to NULL. This can lead to a double free when the
remove process attempts to free it again. Therefore, qm->debug.qm_diff_regs
should be set to NULL after it is freed.
Fixes: 8be091338971 ("crypto: hisilicon/debugfs - Fix debugfs uninit process issue")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acb59a4bb8ed34e738a4c3463127bf3f6b5e11a9 ]
host_seq_bmp is allocated with vzalloc but is currently freed with
bitmap_free, which uses kfree internally. This mismach prevents the
resource from being released properly and may result in memory leaks
or other issues.
Fix this by freeing host_seq_bmp with vfree to match the vzalloc
allocation.
Fixes: f232836a91 ("vfio/pds: Add support for dirty page tracking")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://lore.kernel.org/r/20250913153154.1028835-1-zilin@seu.edu.cn
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a746c1a2c7980de6c888b6373299f751ad7790b ]
The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. This commit fixes a bad calculation.
This will fix the return value of copy_to_user in a specific faulting case.
The behaviour of memcpy stays unchanged.
Fixes: 9570770480 ("sparc64: Convert NG4copy_{from,to}_user to accurate exception reporting.")
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> # on Oracle SPARC T4-1
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20250905-memcpy_series-v4-4-1ca72dda195b@mkarcher.dialup.fu-berlin.de
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b67c8fc10b13a9090340c5f8a37d308f4e1571c ]
The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. This commit fixes a couple of bad
calculations and a broken epilogue in the exception handlers. This will
prevent crashes and ensure correct return values of copy_from_user and
copy_to_user in the faulting case. The behaviour of memcpy stays unchanged.
Fixes: 7ae3aaf53f ("sparc64: Convert NGcopy_{from,to}_user to accurate exception reporting.")
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> # on SPARC T4 with modified kernel to use Niagara 1 code
Tested-by: Magnus Lindholm <linmag7@gmail.com> # on Sun Fire T2000
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Tested-by: Ethan Hawke <ehawk@ember.systems> # on Sun Fire T2000
Tested-by: Ken Link <iissmart@numberzero.org> # on Sun Fire T1000
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20250905-memcpy_series-v4-3-1ca72dda195b@mkarcher.dialup.fu-berlin.de
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47b49c06eb62504075f0f2e2227aee2e2c2a58b3 ]
Anthony Yznaga tracked down that a BUG_ON in ext4 code with large folios
enabled resulted from copy_from_user() returning impossibly large values
greater than the size to be copied. This lead to __copy_from_iter()
returning impossible values instead of the actual number of bytes it was
able to copy.
The BUG_ON has been reported in
https://lore.kernel.org/r/b14f55642207e63e907965e209f6323a0df6dcee.camel@physik.fu-berlin.de
The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. The exception handlers expect that
%o2 has already been masked during the bulk copy loop, but the masking was
performed after that loop. This will fix the return value of copy_from_user
and copy_to_user in the faulting case. The behaviour of memcpy stays
unchanged.
Fixes: ee841d0aff ("sparc64: Convert U3copy_{from,to}_user to accurate exception reporting.")
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> # on Sun Netra 240
Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Tested-by: René Rebe <rene@exactcode.com> # on UltraSparc III+ and UltraSparc IIIi
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20250905-memcpy_series-v4-2-1ca72dda195b@mkarcher.dialup.fu-berlin.de
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fba1713001195e59cfc001ff1f2837dab877efb ]
The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. This commit fixes a couple of bad
calculations. This will fix the return value of copy_from_user and
copy_to_user in the faulting case. The behaviour of memcpy stays unchanged.
Fixes: cb736fdbb2 ("sparc64: Convert U1copy_{from,to}_user to accurate exception reporting.")
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> # on QEMU 10.0.3
Tested-by: René Rebe <rene@exactcode.com> # on Ultra 5 UltraSparc IIi
Tested-by: Jonathan 'theJPster' Pallant <kernel@thejpster.org.uk> # on Sun Netra T1
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20250905-memcpy_series-v4-1-1ca72dda195b@mkarcher.dialup.fu-berlin.de
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32d340ae675800672e1219444a17940a8efe5cca ]
In ieee80211_rx_handle_packet(), if the caller does not provide pubsta
information, an attempt is made to find the station using the address 2
(source address) field in the header. Since pubsta is missing, link
information such as link_valid and link_id is also unavailable. Now if such
a situation comes, and if a matching ML station entry is found based on
the source address, currently the packet is dropped due to missing link ID
in the status field which is not correct.
Hence, to fix this issue, if link_valid is not set and the station is an
ML station, make an attempt to find a link station entry using the source
address. If a valid link station is found, derive the link ID and proceed
with packet processing. Otherwise, drop the packet as per the existing
flow.
Fixes: ea9d807b56 ("wifi: mac80211: add link information in ieee80211_rx_status")
Suggested-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250917-fix_data_packet_rx_with_mlo_and_no_pubsta-v1-1-8cf971a958ac@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c716e87ea33519920811338100d6d8a7fb32456 ]
Section heading for sched_waking histogram is shown as normal paragraph
instead due to codeblock marker for the following diagram being in the
same line as the section underline. Separate them.
Fixes: daceabf1b4 ("tracing/doc: Fix ascii-art in histogram-design.rst")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250916054202.582074-5-bagasdotme@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 200651b9b8aadfbbec852f0e5d042d9abe75e2ab ]
Currently, if the next-hop netdevice does not support ARP resolution,
the destination MAC address is silently set to zero without reporting
an error. This leads to incorrect behavior and may result in packet
transmission failures.
Fix this by deferring MAC resolution to the IP stack via neighbour
lookup, allowing proper resolution or error reporting as appropriate.
Fixes: 7025fcd36b ("IB: address translation to map IP toIB addresses (GIDs)")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20250916111103.84069-3-edwards@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08fa726e66039dfa80226dfa112931f60ad4c898 ]
This reverts commit 28a76fcc4c85dd39633fb96edb643c91820133e3.
No actual HW bugs are known where Endpoint Context shows Running state
but Stop Endpoint fails repeatedly with Context State Error and leaves
the endpoint state unchanged. Stop Endpoint retries on Running EPs have
been performed since early 2021 with no such issues reported so far.
Trying to handle this hypothetical case brings a more realistic danger:
if Stop Endpoint fails on an endpoint which hasn't yet started after a
doorbell ring and enough latency occurs before this completion event is
handled, the driver may time out and begin removing cancelled TDs from
a running endpoint, even though one more retry would stop it reliably.
Such high latency is rare but not impossible, and removing TDs from a
running endpoint can cause more damage than not giving back a cancelled
URB (which wasn't happening anyway). So err on the side of caution and
revert to the old policy of always retrying if the EP appears running.
[Remove stable tag as we are dealing with theoretical cases -Mathias]
Fixes: 28a76fcc4c85d ("usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running")
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9877c004e9f4d10e7786ac80a50321705d76e036 ]
Change the error code EAGAIN to -EAGAIN in qla_nvme_xmt_ls_rsp() to
align with qla2x00_start_sp() returning negative error codes or
QLA_SUCCESS, preventing logical errors.
Fixes: 875386b988 ("scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Message-ID: <20250905075446.381139-4-rongqianfeng@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f037e3acda79639a78f096355f2c308a3d45492 ]
Change the error code EAGAIN to -EAGAIN in START_SP_W_RETRIES() to align
with qla2x00_start_sp() returning negative error codes or QLA_SUCCESS,
preventing logical errors. Additionally, the '_rval' variable should
store negative error codes to conform to Linux kernel error code
conventions.
Fixes: 9803fb5d27 ("scsi: qla2xxx: Fix task management cmd failure")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Message-ID: <20250905075446.381139-3-rongqianfeng@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 066b8f3fa85c1be7fb7dbae202231e131d38f7bc ]
Change the error code EAGAIN to -EAGAIN in qla24xx_sadb_update() and
qla_edif_process_els() to align with qla2x00_start_sp() returning
negative error codes or QLA_SUCCESS, preventing logical errors.
Fixes: 0b3f3143d4 ("scsi: qla2xxx: edif: Add retry for ELS passthrough")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Message-ID: <20250905075446.381139-2-rongqianfeng@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1a599a8136b16522b5afebd122395524496d549 ]
There appears to be a cut-n-paste error with the incorrect field
ndr_desc->numa_node being reported for the target node. Fix this by
using ndr_desc->target_node instead.
Fixes: f060db9937 ("ACPI: NFIT: Use fallback node id when numa info in NFIT table is incorrect")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2f7c32b254006ad48f8e4efb2e7e7bf71739f17 ]
f2fs_zero_post_eof_page() may cuase more overhead due to invalidate_lock
and page lookup, change as below to mitigate its overhead:
- check new_size before grabbing invalidate_lock
- lookup and invalidate pages only in range of [old_size, new_size]
Fixes: ba8dac350faf ("f2fs: fix to zero post-eof page")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42754b7de2b1a2cf116c5e3f1e8e78392f4ed700 ]
In mt76_wmac_probe(), when the mt76_alloc_device() call succeeds, memory
is allocated for both struct ieee80211_hw and a workqueue. However, on
the error path, the workqueue is not freed. Fix that by calling
mt76_free_device() on the error path.
Fixes: c8846e1015 ("mt76: add driver for MT7603E and MT7628/7688")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://patch.msgid.link/20250709145532.41246-1-abdun.nihaal@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7dfd80f70ef00d871df5af7c391133f7ba61ad9b ]
When the watchdog gets enabled with this driver, it leaves enough time
for the core watchdog subsystem to start pinging it. But when the
watchdog is already started by hardware or by the boot loader, little
time remains before it fires and it happens that the core watchdog
subsystem doesn't have time to start pinging it.
Until commit 19ce9490aa ("watchdog: mpc8xxx: use the core worker
function") pinging was managed by the driver itself and the watchdog
was immediately pinged by setting the timer expiry to 0.
So restore similar behaviour by pinging it when enabling it so that
if it was already enabled the watchdog timer counter is reloaded.
Fixes: 19ce9490aa ("watchdog: mpc8xxx: use the core worker function")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 944b6b216c0387ac3050cd8b773819ae360bfb1c ]
KCSAN reported a data-race on the `ipvs->enable` flag, which is
written in the control path and read concurrently from many other
contexts.
Following a suggestion by Julian, this patch fixes the race by
converting all accesses to use `WRITE_ONCE()/READ_ONCE()`.
This lightweight approach ensures atomic access and acts as a
compiler barrier, preventing unsafe optimizations where the flag
is checked in loops (e.g., in ip_vs_est.c).
Additionally, the `enable` checks in the fast-path hooks
(`ip_vs_in_hook`, `ip_vs_out_hook`, `ip_vs_forward_icmp`) are
removed. These are unnecessary since commit 857ca89711
("ipvs: register hooks only with services"). The `enable=0`
condition they check for can only occur in two rare and non-fatal
scenarios: 1) after hooks are registered but before the flag is set,
and 2) after hooks are unregistered on cleanup_net. In the worst
case, a single packet might be mishandled (e.g., dropped), which
does not lead to a system crash or data corruption. Adding a check
in the performance-critical fast-path to handle this harmless
condition is not a worthwhile trade-off.
Fixes: 857ca89711 ("ipvs: register hooks only with services")
Reported-by: syzbot+1651b5234028c294c339@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1651b5234028c294c339
Suggested-by: Julian Anastasov <ja@ssi.bg>
Link: https://lore.kernel.org/lvs-devel/2189fc62-e51e-78c9-d1de-d35b8e3657e3@ssi.bg/
Signed-off-by: Zhang Tengfei <zhtfdev@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba941796d7cd1e81f51eed145dad1b47240ff420 ]
Since the ahash_region() macro was redefined to calculate the region
index solely from HTABLE_REGION_BITS, the htable_bits parameter became
unused.
Remove the unused htable_bits argument and its call sites, simplifying
the code without changing semantics.
Fixes: 8478a729c046 ("netfilter: ipset: fix region locking in hash types")
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Reviewed-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33f5c69c4daff39c010b3ea6da8ebab285f4277b ]
Fix iio_convert_raw_to_processed() offset handling for channels without
a scale attribute.
The offset has been applied to the raw64 value not to the original raw
value. Use the raw64 value so that the offset is taken into account.
Fixes: 14b457fdde ("iio: inkern: apply consumer scale when no channel scale is available")
Cc: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250831104825.15097-3-hansg@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f85406bf830eb8747dd555ab53c9d97ee4af293 ]
There is an issue with the handling of negative channel scales
in iio_convert_raw_to_processed_unlocked() when the channel-scale
is of the IIO_VAL_INT_PLUS_[MICRO|NANO] type:
Things work for channel-scale values > -1.0 and < 0.0 because of
the use of signed values in:
*processed += div_s64(raw64 * (s64)scale_val2 * scale, 1000000LL);
Things will break however for scale values < -1.0. Lets for example say
that raw = 2, (caller-provided)scale = 10 and (channel)scale_val = -1.5.
The result should then be 2 * 10 * -1.5 = -30.
channel-scale = -1.5 means scale_val = -1 and scale_val2 = 500000,
now lets see what gets stored in processed:
1. *processed = raw64 * scale_val * scale;
2. *processed += raw64 * scale_val2 * scale / 1000000LL;
1. Sets processed to 2 * -1 * 10 = -20
2. Adds 2 * 500000 * 10 / 1000000 = 10 to processed
And the end result is processed = -20 + 10 = -10, which is not correct.
Fix this by always using the abs value of both scale_val and scale_val2
and if either is negative multiply the end-result by -1.
Note there seems to be an unwritten rule about negative
IIO_VAL_INT_PLUS_[MICRO|NANO] values that:
i. values > -1.0 and < 0.0 are written as val=0 val2=-xxx
ii. values <= -1.0 are written as val=-xxx val2=xxx
But iio_format_value() will also correctly display a third option:
iii. values <= -1.0 written as val=-xxx val2=-xxx
Since iio_format_value() uses abs(val) when val2 < 0.
This fix also makes iio_convert_raw_to_processed() properly handle
channel-scales using this third option.
Fixes: 48e44ce0f8 ("iio:inkern: Add function to read the processed value")
Cc: Matteo Martelli <matteomartelli3@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250831104825.15097-2-hansg@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0dc7117da8f92dd5fe077d712a756eccbe377d40 ]
Index allocation requires at least one bit in the $BITMAP attribute to
track usage of index entries. If the bitmap is empty while index blocks
are already present, this reflects on-disk corruption.
syzbot triggered this condition using a malformed NTFS image. During a
rename() operation involving a long filename (which spans multiple
index entries), the empty bitmap allowed the name to be added without
valid tracking. Subsequent deletion of the original entry failed with
-ENOENT, due to unexpected index state.
Reject such cases by verifying that the bitmap is not empty when index
blocks exist.
Reported-by: syzbot+b0373017f711c06ada64@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b0373017f711c06ada64
Fixes: d99208b91933 ("fs/ntfs3: cancle set bad inode after removing name fails")
Tested-by: syzbot+b0373017f711c06ada64@syzkaller.appspotmail.com
Signed-off-by: Moon Hee Lee <moonhee.lee.ca@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 736fc7bf5f68f6b74a0925b7e072c571838657d2 ]
The MFT record relative to the file being opened contains its runlist,
an array containing information about the file's location on the physical
disk. Analysis of all Call Stack paths showed that the values of the
runlist array, from which LCNs are calculated, are not validated before
run_unpack function.
The run_unpack function decodes the compressed runlist data format
from MFT attributes (for example, $DATA), converting them into a runs_tree
structure, which describes the mapping of virtual clusters (VCN) to
logical clusters (LCN). The NTFS3 subsystem also has a shortcut for
deleting files from MFT records - in this case, the RUN_DEALLOCATE
command is sent to the run_unpack input, and the function logic
provides that all data transferred to the runlist about file or
directory is deleted without creating a runs_tree structure.
Substituting the runlist in the $DATA attribute of the MFT record for an
arbitrary file can lead either to access to arbitrary data on the disk
bypassing access checks to them (since the inode access check
occurs above) or to destruction of arbitrary data on the disk.
Add overflow check for addition operation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 4342306f0f ("fs/ntfs3: Add file operations and implementation")
Signed-off-by: Vitaly Grigoryev <Vitaly.Grigoryev@kaspersky.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4336efb59ef364e691ef829a73d9dbd4d5ed7c7b ]
When an invalid value is passed via quirk option, currently
bytcr_rt5640 driver just ignores and leaves as is, which may lead to
unepxected results like OOB access.
This patch adds the sanity check and corrects the input mapping to the
certain default value if an invalid value is passed.
Fixes: 64484ccee7 ("ASoC: Intel: bytcr_rt5651: Set card long_name based on quirks")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20250902171826.27329-4-tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fba404e4b4af4f4f747bb0e41e9fff7d03c7bcc0 ]
When an invalid value is passed via quirk option, currently
bytcr_rt5640 driver only shows an error message but leaves as is.
This may lead to unepxected results like OOB access.
This patch corrects the input mapping to the certain default value if
an invalid value is passed.
Fixes: 063422ca2a ("ASoC: Intel: bytcr_rt5640: Set card long_name based on quirks")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20250902171826.27329-3-tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b20eb0e8de383116f1e1470d74da2a3c83c4e345 ]
When an invalid value is passed via quirk option, currently
bytcht_es8316 driver just ignores and leaves as is, which may lead to
unepxected results like OOB access.
This patch adds the sanity check and corrects the input mapping to the
certain default value if an invalid value is passed.
Fixes: 249d2fc9e5 ("ASoC: Intel: bytcht_es8316: Set card long_name based on quirks")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20250902171826.27329-2-tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0531cdba5029f897da5156815e3bdafe1e9b88d ]
Similar to previous commit 2a934fdb01db ("media: v4l2-dev: fix error
handling in __video_register_device()"), the release hook should be set
before device_register(). Otherwise, when device_register() return error
and put_device() try to callback the release function, the below warning
may happen.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 4760 at drivers/base/core.c:2567 device_release+0x1bd/0x240 drivers/base/core.c:2567
Modules linked in:
CPU: 1 UID: 0 PID: 4760 Comm: syz.4.914 Not tainted 6.17.0-rc3+ #1 NONE
RIP: 0010:device_release+0x1bd/0x240 drivers/base/core.c:2567
Call Trace:
<TASK>
kobject_cleanup+0x136/0x410 lib/kobject.c:689
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0xe9/0x130 lib/kobject.c:737
put_device+0x24/0x30 drivers/base/core.c:3797
pps_register_cdev+0x2da/0x370 drivers/pps/pps.c:402
pps_register_source+0x2f6/0x480 drivers/pps/kapi.c:108
pps_tty_open+0x190/0x310 drivers/pps/clients/pps-ldisc.c:57
tty_ldisc_open+0xa7/0x120 drivers/tty/tty_ldisc.c:432
tty_set_ldisc+0x333/0x780 drivers/tty/tty_ldisc.c:563
tiocsetd drivers/tty/tty_io.c:2429 [inline]
tty_ioctl+0x5d1/0x1700 drivers/tty/tty_io.c:2728
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:598 [inline]
__se_sys_ioctl fs/ioctl.c:584 [inline]
__x64_sys_ioctl+0x194/0x210 fs/ioctl.c:584
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x5f/0x2a0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Before commit c79a39dc8d06 ("pps: Fix a use-after-free"),
pps_register_cdev() call device_create() to create pps->dev, which will
init dev->release to device_create_release(). Now the comment is outdated,
just remove it.
Thanks for the reminder from Calvin Owens, 'kfree_pps' should be removed
in pps_register_source() to avoid a double free in the failure case.
Link: https://lore.kernel.org/all/20250827065010.3208525-1-wangliang74@huawei.com/
Fixes: c79a39dc8d06 ("pps: Fix a use-after-free")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-By: Calvin Owens <calvin@wbinvd.org>
Link: https://lore.kernel.org/r/20250830075023.3498174-1-wangliang74@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cf0b3c243e56bc43be560617416c1d9f301f44c ]
Currently gsm_queue() processes incoming frames and when opening
a DLC channel it calls gsm_dlci_open() which calls gsm_modem_update().
If basic mode is used it calls gsm_modem_upd_via_msc() and it
cannot block the input queue by waiting the response to come
into the same input queue.
Instead allow sending Modem Status Command without waiting for remote
end to respond. Define a new function gsm_modem_send_initial_msc()
for this purpose. As MSC is only valid for basic encoding, it does
not do anything for advanced or when convergence layer type 2 is used.
Fixes: 4847380250 ("tty: n_gsm: fix missing update of modem controls after DLCI open")
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Link: https://lore.kernel.org/r/20250827123221.1148666-1-seppo.takalo@nordicsemi.no
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e271cc0d25015f4be6c88bd7731444644eb352c2 ]
Once the use_os_string flag is set to true for some functions
(e.g. adb/mtp) which need to response the OS string, and then
if we re-bind the ConfigFS gadget to use the other functions
(e.g. hid) which should not to response the OS string, however,
because the use_os_string flag is still true, so the usb gadget
response the OS string descriptor incorrectly, this can cause
the USB device to be unrecognizable on the Windows system.
An example of this as follows:
echo 1 > os_desc/use
ln -s functions/ffs.adb configs/b.1/function0
start adbd
echo "<udc device>" > UDC #succeed
stop adbd
rm configs/b.1/function0
echo 0 > os_desc/use
ln -s functions/hid.gs0 configs/b.1/function0
echo "<udc device>" > UDC #fail to connect on Windows
This patch sets the use_os_string flag to false at bind if
the functions not support OS Descriptors.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Fixes: 87213d388e ("usb: gadget: configfs: OS String support")
Link: https://lore.kernel.org/r/1755833769-25434-1-git-send-email-william.wu@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b570b346ddd727c4b41743a6a2f49e7217c5317f ]
In the twl6030_usb_probe(), the variable ret is declared as
a u32 type. However, since ret may receive -ENODEV when accepting
the return value of omap_usb2_set_comparator().Therefore, its type
should be changed to int.
Fixes: 0e98de67ba ("usb: otg: make twl6030_usb as a comparator driver to omap_usb2")
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://lore.kernel.org/r/20250822092224.30645-1-zhao.xichao@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbda64f3f58027f68211dda8ea94d52d7e493995 ]
Use negative error code -EINVAL instead of positive EINVAL in the default
case of svm_ioctl() to conform to Linux kernel error code conventions.
Fixes: 42de677f79 ("drm/amdkfd: register svm range")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1a8805e5d263453ad76a4f50ab3b1c18ea07560 ]
Fix incorrect argument order in devm_kcalloc() when allocating port->phys.
The original call used sizeof(phy) as the number of elements and
port->lanes as the element size, which is reversed. While this happens to
produce the correct total allocation size with current pointer size and
lane counts, the argument order is wrong.
Fixes: 6fe7c187e0 ("PCI: tegra: Support per-lane PHYs")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
[mani: added Fixes tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250819150436.3105973-1-alok.a.tiwari@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7009e3af0474aca5f64262b3c72fb6e23b232f9b ]
Port of commit 227545b9a0 ("drm/radeon/dpm: Disable sclk
switching on Oland when two 4K 60Hz monitors are connected")
This is an ad-hoc DPM fix, necessary because we don't have
proper bandwidth calculation for DCE 6.
We define "high pixelclock" for SI as higher than necessary
for 4K 30Hz. For example, 4K 60Hz and 1080p 144Hz fall into
this category.
When two high pixel clock displays are connected to Oland,
additionally disable shader clock switching, which results in
a higher voltage, thereby addressing some visible flickering.
v2:
Add more comments.
v3:
Split into two commits for easier review.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed3803533c7bf7df88bc3fc9f70bd317e1228ea8 ]
According to pp_pm_compute_clocks the non-DC display code
has "issues with mclk switching with refresh rates over 120 hz".
The workaround is to disable MCLK switching in this case.
Do the same for legacy DPM.
Fixes: 6ddbd37f10 ("drm/amd/pm: optimize the amdgpu_pm_compute_clocks() implementations")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9003a0746864f39a0ef72bd45f8e1ad85d930d67 ]
Some parts of the code base expect that MCLK switching is turned
off when the vblank time is set to zero.
According to pp_pm_compute_clocks the non-DC code has issues
with MCLK switching with refresh rates over 120 Hz.
v3:
Add code comment to explain this better.
Add an if statement instead of changing the switch_limit.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce025130127437dc884c84c254170e27b2ce9309 ]
Based on some comments in dm_pp_display_configuration
above the crtc_index and line_time fields, these values
are programmed to the SMC to work around an SMC hang
when it switches MCLK.
According to Alex, the Windows driver programs them to:
mclk_change_block_cp_min = 200 / line_time
mclk_change_block_cp_max = 100 / line_time
Let's use the same for the sake of consistency.
Previously we used the watermark values, but it seemed buggy
as the code was mixing up low/high and A/B watermarks, and
was not saving a low watermark value on DCE 6, so
mclk_change_block_cp_max would be always zero previously.
Split this change off from the previous si_upload_smc_data
to make it easier to bisect, in case it causes any issues.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
