This reverts commit 0840b80cb9.
This patch is already upstreamed in v4.4, commit
658d4aed59 (HID: hid-multitouch: Filter collections by application usage.),
and further fixed/cleaned up afterwards in commits
c2ef8f21ea (HID: multitouch: add support for trackpads),
76f5902aeb (HID: hid-multitouch: Simplify setup and frame synchronization) et al.
By having this duplicate patch in AOSP we are doing redundant
checks for Touchscreen and Touchpad devices.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
In upstream commit ca6fb06518
(tcp: attach SYNACK messages to request sockets instead of
listener)
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ca6fb0651883
The building of synack messages was changed, which made it so
the skb->sk points to a casted request_sock. This is problematic,
as there is no sk_socket in a request_sock. So when the qtaguid_mt
function tries to access the sk->sk_socket, it accesses uninitialized
memory.
After looking at how other netfilter implementations handle this,
I realized there was a skb_to_full_sk() helper added, which the
xt_qtaguid code isn't yet using.
This patch adds its use, and resovles panics seen when accessing
uninitialzed memory when processing synack packets.
Reported-by: YongQin Liu <yongquin.liu@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Kernel panic when type "cat /sys/kernel/debug/shrinker"
Unable to handle kernel paging request at virtual address 0af37d40
pgd = d4dec000
[0af37d40] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[<c0bb8f24>] (_raw_spin_lock) from [<c020aa08>] (list_lru_count_one+0x14/0x28)
[<c020aa08>] (list_lru_count_one) from [<c02309a8>] (super_cache_count+0x40/0xa0)
[<c02309a8>] (super_cache_count) from [<c01f6ab0>] (debug_shrinker_show+0x50/0x90)
[<c01f6ab0>] (debug_shrinker_show) from [<c024fa5c>] (seq_read+0x1ec/0x48c)
[<c024fa5c>] (seq_read) from [<c022e8f8>] (__vfs_read+0x20/0xd0)
[<c022e8f8>] (__vfs_read) from [<c022f0d0>] (vfs_read+0x7c/0x104)
[<c022f0d0>] (vfs_read) from [<c022f974>] (SyS_read+0x44/0x9c)
[<c022f974>] (SyS_read) from [<c0107580>] (ret_fast_syscall+0x0/0x3c)
Code: e1a04000 e3a00001 ebd66b39 f594f000 (e1943f9f)
---[ end trace 60c74014a63a9688 ]---
Kernel panic - not syncing: Fatal exception
shrink_control.nid is used but not initialzed, same for
shrink_control.memcg.
This reverts commit b0e7a582b2.
Change-Id: I108de88fa4baaef99a53c4e4c6a1d8c4b4804157
Reported-by: Xiaowen Liu <xiaowen.liu@freescale.com>
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
This reverts commit 78d36d2111.
Drop this duplicate patch. This patch is already upstreamed in v4.4. Commits
5c73fceb8c (SELinux: Enable setting security contexts on rootfs inodes.),
12f348b9dc (SELinux: rename SE_SBLABELSUPP to SBLABEL_MNT), and
b43e725d8d (SELinux: use a helper function to determine seclabel),
for reference.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
This reverts commit 43e1b4f528.
This patch is part of code which is already upstreamed in v4.4. Commits
5c73fceb8c (SELinux: Enable setting security contexts on rootfs inodes.),
12f348b9dc (SELinux: rename SE_SBLABELSUPP to SBLABEL_MNT), and
b43e725d8d (SELinux: use a helper function to determine seclabel).
for reference.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Allows FUSE to report to inotify that it is acting
as a layered filesystem. The userspace component
returns a string representing the location of the
underlying file. If the string cannot be resolved
into a path, the top level path is returned instead.
bug: 23904372
Change-Id: Iabdca0bbedfbff59e9c820c58636a68ef9683d9f
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Update seq_printf() usage in xt_qtaguid to align
with changes from mainline commit 6798a8caaf
"fs/seq_file: convert int seq_vprint/seq_printf/etc...
returns to void".
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
This reverts commit 5c7566a29b.
This patch revert some changes in net/netfilter/xt_qtaguid.c as well.
I'll submit another patch to restore those changes.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
This reverts commit 8d3a6c1538.
This series of patches revert AOSP UID_STAT and NET_ACTIVITY_STATS drivers.
I could not find any meaningful usage of these interfaces in AOSP master.
UID_STAT driver expose "/proc/uid_stat/*" interfaces but it is only
used in AOSP master as in what appears be an out of date bandwidth
test in frameworks/base and in somewhat recent battery utils test
in external/chromium-trace project.
NET_ACTIVITY_STATS driver expose "/proc/net/stat/activity" interface
but I can not track its usage anywhere in AOSP at all.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Drivers should use extcon moving forward.
Documentation/extcon/porting-android-switch-class describes
how to port existing switch class drivers to extcon.
This reverts commit e4b8e66e0a.
Change-Id: I5b622c7ab4c0cb9670f8903f259a99888f503c1a
IP_NF_TARGET_{MASQUERADE,NETMAP,REDIRECT} configs,
already enabled in android-base.cfg for tethering,
are of no use if CONFIG_IP_NF_NAT is not enabled.
Don't rely on platform config for that and enable
CONFIG_IP_NF_NAT in android-base.cfg as well.
Change-Id: Ic72bcebbd925b142b09539466bf963188c83108a
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Backport notes:
Backport uses kernel_module_from_file not kernel_read_file hook.
kernel_read_file replaced kernel_module_from_file in the 4.6 kernel.
There are no inode_security_() helper functions (also introduced in
4.6) so the inode lookup is done using the file_inode() helper which
is standard for kernel version < 4.6.
(Cherry picked from commit 61d612ea73)
Utilize existing kernel_read_file hook on kernel module load.
Add module_load permission to the system class.
Enforces restrictions on kernel module origin when calling the
finit_module syscall. The hook checks that source type has
permission module_load for the target type.
Example for finit_module:
allow foo bar_file:system module_load;
Similarly restrictions are enforced on kernel module loading when
calling the init_module syscall. The hook checks that source
type has permission module_load with itself as the target object
because the kernel module is sourced from the calling process.
Example for init_module:
allow foo foo:system module_load;
Bug: 27824855
Change-Id: I64bf3bd1ab2dc735321160642dc6bbfa996f8068
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Switch to the generic extable search and sort routines which were introduced
with commit a272858 from Ard Biesheuvel. This saves quite some memory in the
vmlinux binary with the 64bit kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
(cherry picked from commit 0de798584b)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
With the 16KB or 64KB page configurations, the generic
vmemmap_populate() implementation warns on potential offnode
page_structs via vmemmap_verify() because the arm64 kasan_init() passes
NUMA_NO_NODE instead of the actual node for the kernel image memory.
Fixes: f9040773b7 ("arm64: move kernel image to base of vmalloc area")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: James Morse <james.morse@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
(cherry picked from commit 2f76969f2e)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Commit c031a4213c ("arm64: kaslr: randomize the linear region")
implements randomization of the linear region, by subtracting a random
multiple of PUD_SIZE from memstart_addr. This causes the virtual mapping
of system RAM to move upwards in the linear region, and at the same time
causes memstart_addr to assume a value which may be negative if the offset
of system RAM in the physical space is smaller than its offset relative to
PAGE_OFFSET in the virtual space.
Since memstart_addr is effectively an offset now, redefine its type as s64
so that expressions involving shifting or division preserve its sign.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 020d044f66)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
The LSE atomics implementation uses runtime patching to patch in calls
to out of line non-LSE atomics implementations on cores that lack hardware
support for LSE. To avoid paying the overhead cost of a function call even
if no call ends up being made, the bl instruction is kept invisible to the
compiler, and the out of line implementations preserve all registers, not
just the ones that they are required to preserve as per the AAPCS64.
However, commit fd045f6cd9 ("arm64: add support for module PLTs") added
support for routing branch instructions via veneers if the branch target
offset exceeds the range of the ordinary relative branch instructions.
Since this deals with jump and call instructions that are exposed to ELF
relocations, the PLT code uses x16 to hold the address of the branch target
when it performs an indirect branch-to-register, something which is
explicitly allowed by the AAPCS64 (and ordinary compiler generated code
does not expect register x16 or x17 to retain their values across a bl
instruction).
Since the lse runtime patched bl instructions don't adhere to the AAPCS64,
they don't deal with this clobbering of registers x16 and x17. So add them
to the clobber list of the asm() statements that perform the call
instructions, and drop x16 and x17 from the list of registers that are
callee saved in the out of line non-LSE implementations.
In addition, since we have given these functions two scratch registers,
they no longer need to stack/unstack temp registers.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: factored clobber list into #define, updated Makefile comment]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 5be8b70af1)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Commit 8439e62a15 ("arm64: mm: use bit ops rather than arithmetic in
pa/va translations") changed the boundary check against PAGE_OFFSET from
an arithmetic comparison to a bit test. This means we now silently assume
that PAGE_OFFSET is a power of 2 that divides the kernel virtual address
space into two equal halves. So make that assumption explicit.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 6d2aa549de)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Commit 324420bf91 ("arm64: add support for ioremap() block
mappings") added new p?d_set_huge functions which do the hard work to
generate and set a correct block entry.
These differ from open-coded huge page creation in the early page table
code by explicitly setting the P?D_TYPE_SECT bits (which are implicitly
retained by mk_sect_prot() for any valid prot), but are otherwise
identical (and cannot fail on arm64).
For simplicity and consistency, make use of these in the initial page
table creation code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit c661cb1c53)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Commit f80fb3a3d5 ("arm64: add support for kernel ASLR") missed a
DSB necessary to complete I-cache maintenance in the primary boot path,
and hence stale instructions may still be present in the I-cache and may
be executed until the I-cache maintenance naturally completes.
Since commit 8ec4198743 ("arm64: mm: ensure patched kernel text is
fetched from PoU"), all CPUs invalidate their I-caches after their MMU
is enabled. Prior a CPU's MMU having been enabled, arbitrary lines may
have been fetched from the PoC into I-caches. We never patch text
expected to be executed with the MMU off. Thus, it is unnecessary to
perform broadcast I-cache maintenance in the primary boot path.
This patch reduces the scope of the I-cache maintenance to the local
CPU, and adds the missing DSB with similar scope, matching prior
maintenance in the primary boot path.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesehvuel <ard.biesheuvel@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit b90b4a608e)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Commit 66b3923a1a ("arm64: hugetlb: add support for PTE contiguous bit")
introduced support for huge pages using the contiguous bit in the PTE
as opposed to block mappings, which may be slightly unwieldy (512M) in
64k page configurations.
Unfortunately, this support has resulted in some late regressions when
running the libhugetlbfs test suite with 64k pages and CONFIG_DEBUG_VM
as a result of a BUG:
| readback (2M: 64): ------------[ cut here ]------------
| kernel BUG at fs/hugetlbfs/inode.c:446!
| Internal error: Oops - BUG: 0 [#1] SMP
| Modules linked in:
| CPU: 7 PID: 1448 Comm: readback Not tainted 4.5.0-rc7 #148
| Hardware name: linux,dummy-virt (DT)
| task: fffffe0040964b00 ti: fffffe00c2668000 task.ti: fffffe00c2668000
| PC is at remove_inode_hugepages+0x44c/0x480
| LR is at remove_inode_hugepages+0x264/0x480
Rather than revert the entire patch, simply avoid advertising the
contiguous huge page sizes for now while people are actively working on
a fix. This patch can then be reverted once things have been sorted out.
Cc: David Woods <dwoods@ezchip.com>
Reported-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit ff7925848b)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Switching between stacks is only valid if we are tracing ourselves while on the
irq_stack, so it is only valid when in current and non-preemptible context,
otherwise is is just zeroed off.
Fixes: 132cd887b5 ("arm64: Modify stack trace and dump for use with irq_stack")
Acked-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit a80a0eb70c)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Since arm64 does not use a decompressor that supplies an execution
environment where it is feasible to some extent to provide a source of
randomness, the arm64 KASLR kernel depends on the bootloader to supply
some random bits in the /chosen/kaslr-seed DT property upon kernel entry.
On UEFI systems, we can use the EFI_RNG_PROTOCOL, if supplied, to obtain
some random bits. At the same time, use it to randomize the offset of the
kernel Image in physical memory.
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 2b5fe07a78)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Before we can move the command line processing before the allocation
of the kernel, which is required for detecting the 'nokaslr' option
which controls that allocation, move the converted command line higher
up in memory, to prevent it from interfering with the kernel itself.
Since x86 needs the address to fit in 32 bits, use UINT_MAX as the upper
bound there. Otherwise, use ULONG_MAX (i.e., no limit)
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 48fcb2d021)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
This implements efi_random_alloc(), which allocates a chunk of memory of
a certain size at a certain alignment, and uses the random_seed argument
it receives to randomize the address of the allocation.
This is implemented by iterating over the UEFI memory map, counting the
number of suitable slots (aligned offsets) within each region, and picking
a random number between 0 and 'number of slots - 1' to select the slot,
This should guarantee that each possible offset is chosen equally likely.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 2ddbfc81ea)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
When KASLR is enabled (CONFIG_RANDOMIZE_BASE=y), and entropy has been
provided by the bootloader, randomize the placement of RAM inside the
linear region if sufficient space is available. For instance, on a 4KB
granule/3 levels kernel, the linear region is 256 GB in size, and we can
choose any 1 GB aligned offset that is far enough from the top of the
address space to fit the distance between the start of the lowest memblock
and the top of the highest memblock.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit c031a4213c)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
This adds support for KASLR is implemented, based on entropy provided by
the bootloader in the /chosen/kaslr-seed DT property. Depending on the size
of the address space (VA_BITS) and the page size, the entropy in the
virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all
4 levels), with the sidenote that displacements that result in the kernel
image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB
granule kernels, respectively) are not allowed, and will be rounded up to
an acceptable value.
If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is
randomized independently from the core kernel. This makes it less likely
that the location of core kernel data structures can be determined by an
adversary, but causes all function calls from modules into the core kernel
to be resolved via entries in the module PLTs.
If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is
randomized by choosing a page aligned 128 MB region inside the interval
[_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of
entropy (depending on page size), independently of the kernel randomization,
but still guarantees that modules are within the range of relative branch
and jump instructions (with the caveat that, since the module region is
shared with other uses of the vmalloc area, modules may need to be loaded
further away if the module region is exhausted)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit f80fb3a3d5)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
This implements CONFIG_RELOCATABLE, which links the final vmlinux
image with a dynamic relocation section, allowing the early boot code
to perform a relocation to a different virtual address at runtime.
This is a prerequisite for KASLR (CONFIG_RANDOMIZE_BASE).
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 1e48ef7fcc)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Instead of using absolute addresses for both the exception location
and the fixup, use offsets relative to the exception table entry values.
Not only does this cut the size of the exception table in half, it is
also a prerequisite for KASLR, since absolute exception table entries
are subject to dynamic relocation, which is incompatible with the sorting
of the exception table that occurs at build time.
This patch also introduces the _ASM_EXTABLE preprocessor macro (which
exists on x86 as well) and its _asm_extable assembly counterpart, as
shorthands to emit exception table entries.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 6c94f27ac8)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
