[ Upstream commit 3c675ddffb ]
Here is a BUG report from syzbot:
BUG: KASAN: slab-out-of-bounds in ntfs_list_ea fs/ntfs3/xattr.c:191 [inline]
BUG: KASAN: slab-out-of-bounds in ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710
Read of size 1 at addr ffff888021acaf3d by task syz-executor128/3632
Call Trace:
ntfs_list_ea fs/ntfs3/xattr.c:191 [inline]
ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710
vfs_listxattr fs/xattr.c:457 [inline]
listxattr+0x293/0x2d0 fs/xattr.c:804
Fix the logic of ea_all iteration. When the ea->name_len is 0,
return immediately, or Add2Ptr() would visit invalid memory
in the next loop.
Fixes: be71b5cba2 ("fs/ntfs3: Add attrib operations")
Reported-by: syzbot+9fcea5ef6dc4dc72d334@syzkaller.appspotmail.com
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
[almaz.alexandrovich@paragon-software.com: lines of the patch have changed]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79ebb53772 ]
with the addition of new MAC blocks like CN10K RPM and CN10KB
RPM_USX, LMACs are noncontiguous and CGX blocks are also
noncontiguous. But during RVU driver initialization, the driver
is assuming they are contiguous and trying to access
cgx or lmac with their id which is resulting in kernel panic.
This patch fixes the issue by adding proper checks.
[ 23.219150] pc : cgx_lmac_read+0x38/0x70
[ 23.219154] lr : rvu_program_channels+0x3f0/0x498
[ 23.223852] sp : ffff000100d6fc80
[ 23.227158] x29: ffff000100d6fc80 x28: ffff00010009f880 x27:
000000000000005a
[ 23.234288] x26: ffff000102586768 x25: 0000000000002500 x24:
fffffffffff0f000
Fixes: 91c6945ea1 ("octeontx2-af: cn10k: Add RPM MAC support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e7bc57b97 ]
Firmware configures NIX block mapping for all MAC blocks.
The current implementation reads the configuration and
creates the mapping between RVU PF and NIX blocks. But
this configuration is only valid for silicons that support
multiple blocks. For all other silicons, all MAC blocks
map to NIX0.
This patch corrects the mapping by adding a check for the same.
Fixes: c5a73b632b ("octeontx2-af: Map NIX block from CGX connection")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0135c482fa ]
If truncate_node() fails in truncate_dnode(), it missed to call
f2fs_put_page(), fix it.
Fixes: 7735730d39 ("f2fs: fix to propagate error from __get_meta_page()")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b712f18c4 ]
Sec proxy/message manager data buffer is 60 bytes with the last of the
registers indicating transmission completion. This however poses a bit
of a challenge.
The backing memory for sec_proxy / message manager is regular memory,
and all sec proxy does is to trigger a burst of all 60 bytes of data
over to the target thread backing ring accelerator. It doesn't do a
memory scrub when it moves data out in the burst. When we transmit
multiple messages, remnants of previous message is also transmitted
which results in some random data being set in TISCI fields of
messages that have been expanded forward.
The entire concept of backward compatibility hinges on the fact that
the unused message fields remain 0x0 allowing for 0x0 value to be
specially considered when backward compatibility of message extension
is done.
So, instead of just writing the completion register, we continue
to fill the message buffer up with 0x0 (note: for partial message
involving completion, we already do this).
This allows us to scale and introduce ABI changes back also work with
other boot stages that may have left data in the internal memory.
While at this, be consistent and explicit with the data_reg pointer
increment.
Fixes: aace66b170 ("mailbox: Introduce TI message manager driver")
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c1f23ad34 ]
If neither a "hif_mspi" nor "mspi" resource is present, the driver will
just early exit in probe but still return success. Apart from not doing
anything meaningful, this would then also lead to a null pointer access
on removal, as platform_get_drvdata() would return NULL, which it would
then try to dereference when trying to unregister the spi master.
Fix this by unconditionally calling devm_ioremap_resource(), as it can
handle a NULL res and will then return a viable ERR_PTR() if we get one.
The "return 0;" was previously a "goto qspi_resource_err;" where then
ret was returned, but since ret was still initialized to 0 at this place
this was a valid conversion in 63c5395bb7 ("spi: bcm-qspi: Fix
use-after-free on unbind"). The issue was not introduced by this commit,
only made more obvious.
Fixes: fa236a7ef2 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Kamal Dasu <kamal.dasu@broadcom.com>
Link: https://lore.kernel.org/r/20230629134306.95823-1-jonas.gorski@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48538ccb82 ]
All ibmvnic resets, make a call to netdev_tx_reset_queue() when
re-opening the device. netdev_tx_reset_queue() resets the num_queued
and num_completed byte counters. These stats are used in Byte Queue
Limit (BQL) algorithms. The difference between these two stats tracks
the number of bytes currently sitting on the physical NIC. ibmvnic
increases the number of queued bytes though calls to
netdev_tx_sent_queue() in the drivers xmit function. When, VIOS reports
that it is done transmitting bytes, the ibmvnic device increases the
number of completed bytes through calls to netdev_tx_completed_queue().
It is important to note that the driver batches its transmit calls and
num_queued is increased every time that an skb is added to the next
batch, not necessarily when the batch is sent to VIOS for transmission.
Unlike other reset types, a NON FATAL reset will not flush the sub crq
tx buffers. Therefore, it is possible for the batched skb array to be
partially full. So if there is call to netdev_tx_reset_queue() when
re-opening the device, the value of num_queued (0) would not account
for the skb's that are currently batched. Eventually, when the batch
is sent to VIOS, the call to netdev_tx_completed_queue() would increase
num_completed to a value greater than the num_queued. This causes a
BUG_ON crash:
ibmvnic 30000002: Firmware reports error, cause: adapter problem.
Starting recovery...
ibmvnic 30000002: tx error 600
ibmvnic 30000002: tx error 600
ibmvnic 30000002: tx error 600
ibmvnic 30000002: tx error 600
------------[ cut here ]------------
kernel BUG at lib/dynamic_queue_limits.c:27!
Oops: Exception in kernel mode, sig: 5
[....]
NIP dql_completed+0x28/0x1c0
LR ibmvnic_complete_tx.isra.0+0x23c/0x420 [ibmvnic]
Call Trace:
ibmvnic_complete_tx.isra.0+0x3f8/0x420 [ibmvnic] (unreliable)
ibmvnic_interrupt_tx+0x40/0x70 [ibmvnic]
__handle_irq_event_percpu+0x98/0x270
---[ end trace ]---
Therefore, do not reset the dql stats when performing a NON_FATAL reset.
Fixes: 0d97338818 ("ibmvnic: Introduce xmit_more support using batched subCRQ hcalls")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4ee93380b ]
Looks like "tc" hard-codes "mangle" as the only supported table
name, but on kernel side there are no checks.
This is wrong. Not all xtables targets are safe to call from tc.
E.g. "nat" targets assume skb has a conntrack object assigned to it.
Normally those get called from netfilter nat core which consults the
nat table to obtain the address mapping.
"tc" userspace either sets PRE or POSTROUTING as hook number, but there
is no validation of this on kernel side, so update netlink policy to
reject bogus numbers. Some targets may assume skb_dst is set for
input/forward hooks, so prevent those from being used.
act_ipt uses the hook number in two places:
1. the state hook number, this is fine as-is
2. to set par.hook_mask
The latter is a bit mask, so update the assignment to make
xt_check_target() to the right thing.
Followup patch adds required checks for the skb/packet headers before
calling the targets evaluation function.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6feb37b3b0 ]
As &net->sctp.addr_wq_lock is also acquired by the timer
sctp_addr_wq_timeout_handler() in protocal.c, the same lock acquisition
at sctp_auto_asconf_init() seems should disable irq since it is called
from sctp_accept() under process context.
Possible deadlock scenario:
sctp_accept()
-> sctp_sock_migrate()
-> sctp_auto_asconf_init()
-> spin_lock(&net->sctp.addr_wq_lock)
<timer interrupt>
-> sctp_addr_wq_timeout_handler()
-> spin_lock_bh(&net->sctp.addr_wq_lock); (deadlock here)
This flaw was found using an experimental static analysis tool we are
developing for irq-related deadlock.
The tentative patch fix the potential deadlock by spin_lock_bh().
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Fixes: 34e5b01186 ("sctp: delay auto_asconf init until binding the first addr")
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230627120340.19432-1-dg573847474@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29f96ac236 ]
Selecting only REGMAP_I2C can leave REGMAP unset, causing build errors,
so also select REGMAP to prevent the build errors.
../drivers/media/cec/i2c/ch7322.c:158:21: error: variable 'ch7322_regmap' has initializer but incomplete type
158 | static const struct regmap_config ch7322_regmap = {
../drivers/media/cec/i2c/ch7322.c:159:10: error: 'const struct regmap_config' has no member named 'reg_bits'
159 | .reg_bits = 8,
../drivers/media/cec/i2c/ch7322.c:159:21: warning: excess elements in struct initializer
159 | .reg_bits = 8,
../drivers/media/cec/i2c/ch7322.c:160:10: error: 'const struct regmap_config' has no member named 'val_bits'
160 | .val_bits = 8,
../drivers/media/cec/i2c/ch7322.c:160:21: warning: excess elements in struct initializer
160 | .val_bits = 8,
../drivers/media/cec/i2c/ch7322.c:161:10: error: 'const struct regmap_config' has no member named 'max_register'
161 | .max_register = 0x7f,
../drivers/media/cec/i2c/ch7322.c:161:25: warning: excess elements in struct initializer
161 | .max_register = 0x7f,
../drivers/media/cec/i2c/ch7322.c:162:10: error: 'const struct regmap_config' has no member named 'disable_locking'
162 | .disable_locking = true,
../drivers/media/cec/i2c/ch7322.c:162:28: warning: excess elements in struct initializer
162 | .disable_locking = true,
../drivers/media/cec/i2c/ch7322.c: In function 'ch7322_probe':
../drivers/media/cec/i2c/ch7322.c:468:26: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration]
468 | ch7322->regmap = devm_regmap_init_i2c(client, &ch7322_regmap);
../drivers/media/cec/i2c/ch7322.c:468:24: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
468 | ch7322->regmap = devm_regmap_init_i2c(client, &ch7322_regmap);
../drivers/media/cec/i2c/ch7322.c: At top level:
../drivers/media/cec/i2c/ch7322.c:158:35: error: storage size of 'ch7322_regmap' isn't known
158 | static const struct regmap_config ch7322_regmap = {
Link: https://lore.kernel.org/linux-media/20230608025435.29249-1-rdunlap@infradead.org
Fixes: 21b9a47e0e ("media: cec: i2c: ch7322: Add ch7322 CEC controller driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jeff Chase <jnchase@google.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Joe Tessler <jrt@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 125bfc7cd7 ]
/sys/block/[device]/queue/iostats is used to control whether to count io
stat. Write 0 to it will clear queue_flags QUEUE_FLAG_IO_STAT which means
iostats is disabled. If we disable iostats and later endable it, the io
issued during this period will be counted incorrectly, inflight will be
decreased to -1.
//T1 set iostats
echo 0 > /sys/block/md0/queue/iostats
clear QUEUE_FLAG_IO_STAT
//T2 issue io
if (QUEUE_FLAG_IO_STAT) -> false
bio_start_io_acct
inflight++
echo 1 > /sys/block/md0/queue/iostats
set QUEUE_FLAG_IO_STAT
//T3 io end
if (QUEUE_FLAG_IO_STAT) -> true
bio_end_io_acct
inflight-- -> -1
Also, if iostats is enabled while issuing io but disabled while io end,
inflight will never be decreased.
Fix it by checking start_time when io end. If start_time is not 0, call
bio_end_io_acct().
Fixes: 528bc2cf2f ("md/raid10: enable io accounting")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230609094320.2397604-1-linan666@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38ba835986 ]
If the PWM is exported but not enabled, do not call pwm_class_apply_state().
First of all, in this case, period may still be unconfigured and this would
make pwm_class_apply_state() return -EINVAL, and then suspend would fail.
Second, it makes little sense to apply state onto PWM that is not enabled
before suspend.
Failing case:
"
$ echo 1 > /sys/class/pwm/pwmchip4/export
$ echo mem > /sys/power/state
...
pwm pwmchip4: PM: dpm_run_callback(): pwm_class_suspend+0x1/0xa8 returns -22
pwm pwmchip4: PM: failed to suspend: error -22
PM: Some devices failed to suspend, or early wake event detected
"
Working case:
"
$ echo 1 > /sys/class/pwm/pwmchip4/export
$ echo 100 > /sys/class/pwm/pwmchip4/pwm1/period
$ echo 10 > /sys/class/pwm/pwmchip4/pwm1/duty_cycle
$ echo mem > /sys/power/state
...
"
Do not call pwm_class_apply_state() in case the PWM is disabled
to fix this issue.
Fixes: 7fd4edc57b ("pwm: sysfs: Add suspend/resume support")
Signed-off-by: Marek Vasut <marex@denx.de>
Fixes: ef2bf4997f ("pwm: Improve args checking in pwm_apply_state()")
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 661dfb7f46 ]
During suspend, all the tpm registers will lose values.
So the 'real_period' value of struct 'imx_tpm_pwm_chip'
should be forced to be zero to force the period update
code can be executed after system resume back.
Signed-off-by: Fancy Fang <chen.fang@nxp.com>
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 738a1cfec2 ("pwm: Add i.MX TPM PWM driver support")
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7dae593cd2 ]
In a couple of situations like
name = kstrndup(buf, count, GFP_KERNEL);
if (!name)
return -ENOSPC;
the error is not actually "No space left on device", but "Out of memory".
It is semantically correct to return -ENOMEM in all failed kstrndup()
and kzalloc() cases in this driver, as it is not a problem with disk
space, but with kernel memory allocator failing allocation.
The semantically correct should be:
name = kstrndup(buf, count, GFP_KERNEL);
if (!name)
return -ENOMEM;
Cc: Dan Carpenter <error27@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Luis R. Rodriguez" <mcgrof@ruslug.rutgers.edu>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Brian Norris <briannorris@chromium.org>
Fixes: c92316bf8e ("test_firmware: add batched firmware tests")
Fixes: 0a8adf5847 ("test: add firmware_class loader test")
Fixes: 548193cba2 ("test_firmware: add support for firmware_request_platform")
Fixes: eb910947c8 ("test: firmware_class: add asynchronous request trigger")
Fixes: 061132d2b9 ("test_firmware: add test custom fallback trigger")
Fixes: 7feebfa487 ("test_firmware: add support for request_firmware_into_buf")
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <20230606070808.9300-1-mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20a41a6261 ]
We should not rely on autosuspend timeout for system suspend. Instead,
let's use force_suspend and force_resume functions. Otherwise the serial
port controller device may not be idled on suspend.
As we are doing a register write on suspend to configure the serial port,
we still need to runtime PM resume the port on suspend.
While at it, let's switch to pm_runtime_resume_and_get() and check for
errors returned. And let's add the missing line break before return to the
suspend function while at it.
Fixes: 09d8b2bdbc ("serial: 8250: omap: Provide ability to enable/disable UART as wakeup source")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Message-ID: <20230614045922.4798-1-tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edd60d24bd ]
Currently if we bootup a device without cable connected, then
usb-conn-gpio won't call set_role() since last_role is same as
current role. This happens because during probe last_role gets
initialised to zero.
To avoid this, added a new constant in enum usb_role, last_role
is set to USB_ROLE_UNKNOWN before performing initial detection.
While at it, also handle default case for the usb_role switch
in cdns3, intel-xhci-usb-role-switch & musb/jz4740 to avoid
build warnings.
Fixes: 4602f3bff2 ("usb: common: add USB GPIO based connection detection driver")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <1685544074-17337-1-git-send-email-quic_prashk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 285cff4c04 ]
The KVM_S390_GET_CMMA_BITS ioctl may return incorrect values when userspace
specifies a start_gfn outside of memslots.
This can occur when a VM has multiple memslots with a hole in between:
+-----+----------+--------+--------+
| ... | Slot N-1 | <hole> | Slot N |
+-----+----------+--------+--------+
^ ^ ^ ^
| | | |
GFN A A+B | |
A+B+C |
A+B+C+D
When userspace specifies a GFN in [A+B, A+B+C), it would expect to get the
CMMA values of the first dirty page in Slot N. However, userspace may get a
start_gfn of A+B+C+D with a count of 0, hence completely skipping over any
dirty pages in slot N.
The error is in kvm_s390_next_dirty_cmma(), which assumes
gfn_to_memslot_approx() will return the memslot _below_ the specified GFN
when the specified GFN lies outside a memslot. In reality it may return
either the memslot below or above the specified GFN.
When a memslot above the specified GFN is returned this happens:
- ofs is calculated, but since the memslot's base_gfn is larger than the
specified cur_gfn, ofs will underflow to a huge number.
- ofs is passed to find_next_bit(). Since ofs will exceed the memslot's
number of pages, the number of pages in the memslot is returned,
completely skipping over all bits in the memslot userspace would be
interested in.
Fix this by resetting ofs to zero when a memslot _above_ cur_gfn is
returned (cur_gfn < ms->base_gfn).
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: afdad61615 ("KVM: s390: Fix storage attributes migration with memory slots")
Message-Id: <20230324145424.293889-2-nrb@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 927e78ac8b ]
ALIGN() expects its second argument to be a power of 2, otherwise
incorrect results are produced for some inputs. The output can be
both larger or smaller than what is expected.
For example, ALIGN(304, 192) equals 320 instead of 384, and
ALIGN(65, 192) equals 256 instead of 192.
However, nestling two ALIGN() as is done in this case seem to only
produce results equal to or bigger than the expected result if ALIGN()
had handled non powers of two, and that in turn results in framesizes
that are either the correct size or too large.
Fortunately, since 192 * 4 / 3 equals 256, it turns out that one ALIGN()
is sufficient.
Fixes: ab1eda449c ("media: venus: vdec: handle 10bit bitstreams")
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c45b2835e7 ]
child_fwnode should be a read only property based on the DT or ACPI. If
it's cleared on the parent device when a child is unloaded, then when
the child is loaded again the connection won't be remade.
child_dev should be cleared instead which signifies that the connection
should be remade when the child_fwnode registers a new coresight_device.
Similarly the reference count shouldn't be decremented as long as the
parent device exists. The correct place to drop the reference is in
coresight_release_platform_data() which is already done.
Reproducible on Juno with the following steps:
# load all coresight modules.
$ cd /sys/bus/coresight/devices/
$ echo 1 > tmc_etr0/enable_sink
$ echo 1 > etm0/enable_source
# Works fine ^
$ echo 0 > etm0/enable_source
$ rmmod coresight-funnel
$ modprobe coresight-funnel
$ echo 1 > etm0/enable_source
-bash: echo: write error: Invalid argument
Fixes: 37ea1ffddf ("coresight: Use fwnode handle instead of device names")
Fixes: 2af89ebacf ("coresight: Clear the connection field properly")
Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-2-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25614735a6 ]
omap8250_irq() accesses UART_IER. This register is modified twice
by each console write (serial8250_console_write()) under the port
lock. omap8250_irq() must also take the port lock to guanentee
synchronized access to UART_IER.
Since the port lock is already being taken for the stop_rx() callback
and since it is safe to call cancel_delayed_work() while holding the
port lock, simply extend the port lock region to include UART_IER
access.
Fixes: 1fe0e1fa32 ("serial: 8250_omap: Handle optional overrun-throttle-ms property")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230525093159.223817-8-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e6bd945e6 ]
The declaration is in an #ifdef, which causes warnings when building
with 'make W=1' and without CONFIG_PM:
drivers/usb/core/devio.c:742:6: error: no previous prototype for 'usbfs_notify_suspend'
drivers/usb/core/devio.c:747:6: error: no previous prototype for 'usbfs_notify_resume'
Use the same #ifdef check around the function definitions to avoid
the warnings and slightly shrink the USB core.
Fixes: 7794f486ed ("usbfs: Add ioctls for runtime power management")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230516202103.558301-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73346b9965 ]
Kernel documentation has to be synchronized with a code, otherwise
the validator is not happy:
Function parameter or member 'usb_bits' not described in 'extcon_cable'
Function parameter or member 'chg_bits' not described in 'extcon_cable'
Function parameter or member 'jack_bits' not described in 'extcon_cable'
Function parameter or member 'disp_bits' not described in 'extcon_cable'
Describe the fields added in the past.
Fixes: ceaa98f442 ("extcon: Add the support for the capability of each property")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e77e0b7a9 ]
Kernel documentation has to be synchronized with a code, otherwise
the validator is not happy:
Function parameter or member 'usb_propval' not described in 'extcon_cable'
Function parameter or member 'chg_propval' not described in 'extcon_cable'
Function parameter or member 'jack_propval' not described in 'extcon_cable'
Function parameter or member 'disp_propval' not described in 'extcon_cable'
Describe the fields added in the past.
Fixes: 067c1652e7 ("extcon: Add the support for extcon property according to extcon type")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f6ecb89fe ]
Consider a case where gserial_disconnect has already cleared
gser->ioport. And if gserial_suspend gets called afterwards,
it will lead to accessing of gser->ioport and thus causing
null pointer dereference.
Avoid this by adding a null pointer check. Added a static
spinlock to prevent gser->ioport from becoming null after
the newly added null pointer check.
Fixes: aba3a8d01d ("usb: gadget: u_serial: add suspend resume callbacks")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/1683278317-11774-1-git-send-email-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a52108936 ]
This patch adds the support for giving the complete bitmask
in reset structure and reset operation will use this bitmask
for all reset operations.
Currently, reset structure only takes a single bit for each reset
and then calculates the bitmask by using the BIT() macro.
However, this is not sufficient anymore for newer SoC-s like IPQ8074,
IPQ6018 and more, since their networking resets require multiple bits
to be asserted in order to properly reset the HW block completely.
So, in order to allow asserting multiple bits add "bitmask" field to
qcom_reset_map, and then use that bitmask value if its populated in the
driver, if its not populated, then we just default to existing behaviour
and calculate the bitmask on the fly.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107132901.489240-1-robimarko@gmail.com
Stable-dep-of: 349b5bed53 ("clk: qcom: ipq6018: fix networking resets")
Signed-off-by: Sasha Levin <sashal@kernel.org>
