commit b4ab94d6ad upstream.
The current code retrieves the TOS field after the lookup
on the ipv4 routing table. The routing process currently
only allows routing based on the original 3 TOS bits, and
not on the full 6 DSCP bits.
As a result the retrieved TOS is cut to the 3 bits.
However for inheriting purposes the full 6 bits should be used.
Extract the full 6 bits before the route lookup and use
that instead of the cut off 3 TOS bits.
Fixes: e305ac6cf5 ("geneve: Add support to collect tunnel metadata.")
Signed-off-by: Matthias May <matthias.may@westermo.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/20220805190006.8078-1-matthias.may@westermo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f4093e2bf upstream.
There are use-after-free bugs caused by tst_timer. The root cause
is that there are no functions to stop tst_timer in idt77252_exit().
One of the possible race conditions is shown below:
(thread 1) | (thread 2)
| idt77252_init_one
| init_card
| fill_tst
| mod_timer(&card->tst_timer, ...)
idt77252_exit | (wait a time)
| tst_timer
|
| ...
kfree(card) // FREE |
| card->soft_tst[e] // USE
The idt77252_dev is deallocated in idt77252_exit() and used in
timer handler.
This patch adds del_timer_sync() in idt77252_exit() in order that
the timer handler could be stopped before the idt77252_dev is
deallocated.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220805070008.18007-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32ad11127b upstream.
This code tries to store -EFAULT in an unsigned int. The
xenbus_file_read() function returns type ssize_t so the negative value
is returned as a positive value to the user.
This change forces another change to the min() macro. Originally, the
min() macro used "unsigned" type which checkpatch complains about. Also
unsigned type would break if "len" were not capped at MAX_RW_COUNT. Use
size_t for the min(). (No effect on runtime for the min_t() change).
Fixes: 2fb3683e7b ("xen: Add xenbus device driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Link: https://lore.kernel.org/r/YutxJUaUYRG/VLVc@kili
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ae97cae07 upstream.
The port flag isn't set to `NFP_PORT_CHANGED` when using
`ethtool -m DEVNAME` before, so the port state (e.g. interface)
cannot be updated. Therefore, it caused that `ethtool -m DEVNAME`
sometimes cannot read the correct information.
E.g. `ethtool -m DEVNAME` cannot work when load driver before plug
in optical module, as the port interface is still NONE without port
update.
Now update the port state before sending info to NIC to ensure that
port interface is correct (latest state).
Fixes: 61f7c6f448 ("nfp: implement ethtool get module EEPROM")
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220802093355.69065-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45e1058b77 upstream.
The call to:
ret = simple_write_to_buffer(buf, size, offp, ubuf, size);
will return success if it is able to write even one byte to "buf".
The value of "*offp" controls which byte. This could result in
reading uninitialized data when we do the sscanf() on the next line.
This code is not really desigined to handle partial writes where
*offp is non-zero and the "buf" is preserved and re-used between writes.
Just ban partial writes and replace the simple_write_to_buffer() with
copy_from_user().
Fixes: 578b881ba9 ("NTB: Add tool test client")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aac289653f upstream.
When passed -print-file-name=plugin, the dummy gcc script creates a
temporary directory that is never cleaned up. To avoid cluttering
$TMPDIR, instead use a static directory included in the source tree.
Fixes: 76426e2388 ("kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58dd438557 upstream.
When handle_cap_grant is called on an IMPORT op, then the snap_rwsem is
held and the function is expected to release it before returning. It
currently fails to do that in all cases which could lead to a deadlock.
Fixes: 6f05b30ea0 ("ceph: reset i_requested_max_size if file write is not wanted")
Link: https://tracker.ceph.com/issues/55857
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f5ceb8851 upstream.
When the number of partial slabs in each cache is the same (e.g., the
value are 0), the results of the `slabinfo -X -N5` and `slabinfo -P -N5`
are different.
/ # slabinfo -X -N5
...
Slabs sorted by number of partial slabs
---------------------------------------
Name Objects Objsize Space Slabs/Part/Cpu O/S O %Fr %Ef Flg
inode_cache 15180 392 6217728 758/0/1 20 1 0 95 a
kernfs_node_cache 22494 88 2002944 488/0/1 46 0 0 98
shmem_inode_cache 663 464 319488 38/0/1 17 1 0 96
biovec-max 50 3072 163840 4/0/1 10 3 0 93 A
dentry 19050 136 2600960 633/0/2 30 0 0 99 a
/ # slabinfo -P -N5
Name Objects Objsize Space Slabs/Part/Cpu O/S O %Fr %Ef Flg
bdev_cache 32 984 32.7K 1/0/1 16 2 0 96 Aa
ext4_inode_cache 42 752 32.7K 1/0/1 21 2 0 96 a
dentry 19050 136 2.6M 633/0/2 30 0 0 99 a
TCPv6 17 1840 32.7K 0/0/1 17 3 0 95 A
RAWv6 18 856 16.3K 0/0/1 18 2 0 94 A
This problem is caused by the sort_slabs(). So let's use alphabetic order
when two values are equal in the sort_slabs().
By the way, the content of the `slabinfo -h` is not aligned because the
`-P|--partial Sort by number of partial slabs`
uses tabs instead of spaces. So let's use spaces instead of tabs to fix
it.
Link: https://lkml.kernel.org/r/20220528063117.935158-1-songyuanzheng@huawei.com
Fixes: 1106b205a3 ("tools/vm/slabinfo: add partial slab listing to -X")
Signed-off-by: Yuanzheng Song <songyuanzheng@huawei.com>
Cc: "Tobin C. Harding" <tobin@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fea013e020 upstream.
Feature bits have to be encoded into the correct locations. This hasn't
been an issue so far because the only hole in the feature bits was in bit
10 (CEPHFS_FEATURE_RECLAIM_CLIENT), which is located in the 2nd byte. When
adding more bits that go beyond the this 2nd byte, the bug will show up.
[xiubli: remove incorrect comment for CEPHFS_FEATURES_CLIENT_SUPPORTED]
Fixes: 9ba1e22453 ("ceph: allocate the correct amount of extra bytes for the session features")
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3e7b29e30 upstream.
Imagine two non-blocking vsock_connect() requests on the same socket.
The first request schedules @connect_work, and after it times out,
vsock_connect_timeout() sets *sock* state back to TCP_CLOSE, but keeps
*socket* state as SS_CONNECTING.
Later, the second request returns -EALREADY, meaning the socket "already
has a pending connection in progress", even though the first request has
already timed out.
As suggested by Stefano, fix it by setting *socket* state back to
SS_UNCONNECTED, so that the second request will return -ETIMEDOUT.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e97cfed99 upstream.
An O_NONBLOCK vsock_connect() request may try to reschedule
@connect_work. Imagine the following sequence of vsock_connect()
requests:
1. The 1st, non-blocking request schedules @connect_work, which will
expire after 200 jiffies. Socket state is now SS_CONNECTING;
2. Later, the 2nd, blocking request gets interrupted by a signal after
a few jiffies while waiting for the connection to be established.
Socket state is back to SS_UNCONNECTED, but @connect_work is still
pending, and will expire after 100 jiffies.
3. Now, the 3rd, non-blocking request tries to schedule @connect_work
again. Since @connect_work is already scheduled,
schedule_delayed_work() silently returns. sock_hold() is called
twice, but sock_put() will only be called once in
vsock_connect_timeout(), causing a memory leak reported by syzbot:
BUG: memory leak
unreferenced object 0xffff88810ea56a40 (size 1232):
comm "syz-executor756", pid 3604, jiffies 4294947681 (age 12.350s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
28 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............
backtrace:
[<ffffffff837c830e>] sk_prot_alloc+0x3e/0x1b0 net/core/sock.c:1930
[<ffffffff837cbe22>] sk_alloc+0x32/0x2e0 net/core/sock.c:1989
[<ffffffff842ccf68>] __vsock_create.constprop.0+0x38/0x320 net/vmw_vsock/af_vsock.c:734
[<ffffffff842ce8f1>] vsock_create+0xc1/0x2d0 net/vmw_vsock/af_vsock.c:2203
[<ffffffff837c0cbb>] __sock_create+0x1ab/0x2b0 net/socket.c:1468
[<ffffffff837c3acf>] sock_create net/socket.c:1519 [inline]
[<ffffffff837c3acf>] __sys_socket+0x6f/0x140 net/socket.c:1561
[<ffffffff837c3bba>] __do_sys_socket net/socket.c:1570 [inline]
[<ffffffff837c3bba>] __se_sys_socket net/socket.c:1568 [inline]
[<ffffffff837c3bba>] __x64_sys_socket+0x1a/0x20 net/socket.c:1568
[<ffffffff84512815>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff84512815>] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:80
[<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
<...>
Use mod_delayed_work() instead: if @connect_work is already scheduled,
reschedule it, and undo sock_hold() to keep the reference count
balanced.
Reported-and-tested-by: syzbot+b03f55bf128f9a38f064@syzkaller.appspotmail.com
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Co-developed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab7e2e0dfa upstream.
According to Guillaume Nault RT_TOS should never be used for IPv6.
Quote:
RT_TOS() is an old macro used to interprete IPv4 TOS as described in
the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4
code, although, given the current state of the code, most of the
existing calls have no consequence.
But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS"
field to be interpreted the RFC 1349 way. There's no historical
compatibility to worry about.
Fixes: 571912c69f ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcb0da7fff upstream.
According to Guillaume Nault RT_TOS should never be used for IPv6.
Quote:
RT_TOS() is an old macro used to interprete IPv4 TOS as described in
the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4
code, although, given the current state of the code, most of the
existing calls have no consequence.
But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS"
field to be interpreted the RFC 1349 way. There's no historical
compatibility to worry about.
Fixes: ce99f6b97f ("net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels")
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca2bb69514 upstream.
According to Guillaume Nault RT_TOS should never be used for IPv6.
Quote:
RT_TOS() is an old macro used to interprete IPv4 TOS as described in
the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4
code, although, given the current state of the code, most of the
existing calls have no consequence.
But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS"
field to be interpreted the RFC 1349 way. There's no historical
compatibility to worry about.
Fixes: 3a56f86f1b ("geneve: handle ipv6 priority like ipv4 tos")
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3c2902769 upstream.
Given a field with its location/offset in input packet,
the key checking logic verifies whether extracting the
field can be supported or not based on the mkex profile
loaded in hardware. This logic is wrong wrt source mac
and this patch fixes that.
Fixes: 9b179a960a ("octeontx2-af: Generate key field bit mask from KEX profile")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f8fe40ab7 upstream.
The teardown sequence in FLR handler returns if no NIX LF
is attached to PF/VF because it indicates that graceful
shutdown of resources already happened. But there is a
chance of all allocated MCAM entries not being freed by
PF/VF. Hence free mcam entries even in case of detached LF.
Fixes: c554f9c157 ("octeontx2-af: Teardown NPA, NIX LF upon receiving FLR")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf24376265 upstream.
The packet parser profile supplied as firmware may not
be present all the time and default profile is used mostly.
Hence suppress firmware loading warning from kernel due to
absence of firmware in kernel image.
Fixes: 3a7244152f ("octeontx2-af: add support for custom KPU entries")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd1d1a8a6b upstream.
NPC_PARSE_NIBBLE for TX interface has to be equal to the RX one for some
silicon revisions. Mistakenly this fixup was only applied to the default
MKEX profile while it should also be applied to any loaded profile.
Fixes: 1c1935c994 ("octeontx2-af: Add NIX1 interfaces to NPC")
Signed-off-by: Stanislaw Kardach <skardach@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 13c9f4dc10 upstream.
For packets scheduled to RPM and LBK, NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL]
selects the TL3 or TL2 scheduling level as the one used for link/channel
selection and backpressure. For each scheduling queue at the selected
level: Setting NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG[ENA] = 1 allows
the TL3/TL2 queue to schedule packets to a specified RPM or LBK link
and channel.
There is an issue in the code where NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL]
is set to TL3 where as the NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG is
configured for TL2 queue in some cases. As a result packets will not
transmit on that link/channel. This patch fixes the issue by configuring
the NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG register depending on the
NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL] value.
Fixes: caa2da34fd ("octeontx2-pf: Initialize and config queues")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20220802142813.25031-1-naveenm@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8bcfb4ae4d upstream.
The custom multipath hash tests use mausezahn in order to test how
changes in various packet fields affect the packet distribution across
the available nexthops.
The tool uses the libnet library for various low-level packet
construction and injection. The library started using the
"SO_BINDTODEVICE" socket option for IPv6 sockets in version 1.1.6 and
for IPv4 sockets in version 1.2.
When the option is not set, packets are not routed according to the
table associated with the VRF master device and tests fail.
Fix this by prefixing the command with "ip vrf exec", which will cause
the route lookup to occur in the VRF routing table. This makes the tests
pass regardless of the libnet library version.
Fixes: 511e8db540 ("selftests: forwarding: Add test for custom multipath hash")
Fixes: 185b0c190b ("selftests: forwarding: Add test for custom multipath hash with IPv4 GRE")
Fixes: b7715acba4 ("selftests: forwarding: Add test for custom multipath hash with IPv6 GRE")
Reported-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Link: https://lore.kernel.org/r/20220809113320.751413-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 744d23c71a upstream.
Calling mdio_bus_phy_resume() with neither the PHY state machine set to
PHY_HALTED nor phydev->mac_managed_pm set to true is a good indication
that we can produce a race condition looking like this:
CPU0 CPU1
bcmgenet_resume
-> phy_resume
-> phy_init_hw
-> phy_start
-> phy_resume
phy_start_aneg()
mdio_bus_phy_resume
-> phy_resume
-> phy_write(..., BMCR_RESET)
-> usleep() -> phy_read()
with the phy_resume() function triggering a PHY behavior that might have
to be worked around with (see bf8bfc4336 ("net: phy: broadcom: Fix
brcm_fet_config_init()") for instance) that ultimately leads to an error
reading from the PHY.
Fixes: fba863b816 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220801233403.258871-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b4db2e528 upstream.
After a failed devlink reload, devlink parameters are still registered,
which means user space can set and get their values. In the case of the
mlxsw "acl_region_rehash_interval" parameter, these operations will
trigger a use-after-free [1].
Fix this by rejecting set and get operations while in the failed state.
Return the "-EOPNOTSUPP" error code which does not abort the parameters
dump, but instead causes it to skip over the problematic parameter.
Another possible fix is to perform these checks in the mlxsw parameter
callbacks, but other drivers might be affected by the same problem and I
am not aware of scenarios where these stricter checks will cause a
regression.
[1]
mlxsw_spectrum3 0000:00:10.0: Port 125: Failed to register netdev
mlxsw_spectrum3 0000:00:10.0: Failed to create ports
==================================================================
BUG: KASAN: use-after-free in mlxsw_sp_acl_tcam_vregion_rehash_intrvl_get+0xbd/0xd0 drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:904
Read of size 4 at addr ffff8880099dcfd8 by task kworker/u4:4/777
CPU: 1 PID: 777 Comm: kworker/u4:4 Not tainted 5.19.0-rc7-custom-126601-gfe26f28c586d #1
Hardware name: QEMU MSN4700, BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: netns cleanup_net
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x92/0xbd lib/dump_stack.c:106
print_address_description mm/kasan/report.c:313 [inline]
print_report.cold+0x5e/0x5cf mm/kasan/report.c:429
kasan_report+0xb9/0xf0 mm/kasan/report.c:491
__asan_report_load4_noabort+0x14/0x20 mm/kasan/report_generic.c:306
mlxsw_sp_acl_tcam_vregion_rehash_intrvl_get+0xbd/0xd0 drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:904
mlxsw_sp_acl_region_rehash_intrvl_get+0x49/0x60 drivers/net/ethernet/mellanox/mlxsw/spectrum_acl.c:1106
mlxsw_sp_params_acl_region_rehash_intrvl_get+0x33/0x80 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3854
devlink_param_get net/core/devlink.c:4981 [inline]
devlink_nl_param_fill+0x238/0x12d0 net/core/devlink.c:5089
devlink_param_notify+0xe5/0x230 net/core/devlink.c:5168
devlink_ns_change_notify net/core/devlink.c:4417 [inline]
devlink_ns_change_notify net/core/devlink.c:4396 [inline]
devlink_reload+0x15f/0x700 net/core/devlink.c:4507
devlink_pernet_pre_exit+0x112/0x1d0 net/core/devlink.c:12272
ops_pre_exit_list net/core/net_namespace.c:152 [inline]
cleanup_net+0x494/0xc00 net/core/net_namespace.c:582
process_one_work+0x9fc/0x1710 kernel/workqueue.c:2289
worker_thread+0x675/0x10b0 kernel/workqueue.c:2436
kthread+0x30c/0x3d0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>
The buggy address belongs to the physical page:
page:ffffea0000267700 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x99dc
flags: 0x100000000000000(node=0|zone=1)
raw: 0100000000000000 0000000000000000 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880099dce80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff8880099dcf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff8880099dcf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff8880099dd000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff8880099dd080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
Fixes: 98bbf70c1c ("mlxsw: spectrum: add "acl_region_rehash_interval" devlink param")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a542bee27 upstream.
When we call xdp_convert_buff_to_frame() to get xdpf, if it returns
NULL, we should check if xdp_page was allocated by xdp_linearize_page().
If it is newly allocated, it should be freed here alone. Just like any
other "goto err_xdp".
Fixes: 44fa2dbd47 ("xdp: transition into using xdp_frame for ndo_xdp_xmit")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6622e3a731 upstream.
When we're reusing the backchannel requests instead of freeing them,
then we should reinitialise any values of the send/receive xdr_bufs so
that they reflect the available space.
Fixes: 0d2a970d0a ("SUNRPC: Fix a backchannel race")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c770f31d8f upstream.
I discovered that xdr_encode_bool() was returning the same address
that was passed in the @p parameter. The documenting comment states
that the intent is to return the address of the next buffer
location, just like the other "xdr_encode_*" helpers.
The result was the encoded results of NFSv3 PATHCONF operations were
not formed correctly.
Fixes: ded04a587f ("NFSD: Update the NFSv3 PATHCONF3res encoder to use struct xdr_stream")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1bafa7375 upstream.
Before this commit, with a large enough LRU of expired items (100), the
loop skipped all the expired items and was entirely ineffectual in
trimming the LRU list.
Fixes: 95cd623250 ('SUNRPC: Clean up the AUTH cache code')
Signed-off-by: Dan Aloni <dan.aloni@vastdata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c2bf17350 upstream.
When CAN_FLEXCAN=y and M5441x is not set/enabled, there are build
errors in coldfire/device.c:
../arch/m68k/coldfire/device.c:595:26: error: 'MCFFLEXCAN_BASE0' undeclared here (not in a function); did you mean 'MCFDMA_BASE0'?
595 | .start = MCFFLEXCAN_BASE0,
../arch/m68k/coldfire/device.c:596:43: error: 'MCFFLEXCAN_SIZE' undeclared here (not in a function)
596 | .end = MCFFLEXCAN_BASE0 + MCFFLEXCAN_SIZE,
../arch/m68k/coldfire/device.c:600:26: error: 'MCF_IRQ_IFL0' undeclared here (not in a function); did you mean 'MCF_IRQ_I2C0'?
600 | .start = MCF_IRQ_IFL0,
../arch/m68k/coldfire/device.c:605:26: error: 'MCF_IRQ_BOFF0' undeclared here (not in a function); did you mean 'MCF_IRQ_I2C0'?
605 | .start = MCF_IRQ_BOFF0,
../arch/m68k/coldfire/device.c:610:26: error: 'MCF_IRQ_ERR0' undeclared here (not in a function); did you mean 'MCF_IRQ_I2C0'?
610 | .start = MCF_IRQ_ERR0,
Protect the FLEXCAN code blocks by checking if MCFFLEXCAN_SIZE
is defined.
Fixes: 35a9f9363a ("m68k: m5441x: add flexcan support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: uclinux-dev@uclinux.org
Cc: Angelo Dureghello <angelo@kernel-space.org>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ba5e47fb7 upstream.
The final update statement of the for loop exceeds the array range, the
dereference of self->aq_vec[i] is not checked and then leads to the
index out of range error.
Also fixed this kind of coding style in other for loop.
[ 97.937604] UBSAN: array-index-out-of-bounds in drivers/net/ethernet/aquantia/atlantic/aq_nic.c:1404:48
[ 97.937607] index 8 is out of range for type 'aq_vec_s *[8]'
[ 97.937608] CPU: 38 PID: 3767 Comm: kworker/u256:18 Not tainted 5.19.0+ #2
[ 97.937610] Hardware name: Dell Inc. Precision 7865 Tower/, BIOS 1.0.0 06/12/2022
[ 97.937611] Workqueue: events_unbound async_run_entry_fn
[ 97.937616] Call Trace:
[ 97.937617] <TASK>
[ 97.937619] dump_stack_lvl+0x49/0x63
[ 97.937624] dump_stack+0x10/0x16
[ 97.937626] ubsan_epilogue+0x9/0x3f
[ 97.937627] __ubsan_handle_out_of_bounds.cold+0x44/0x49
[ 97.937629] ? __scm_send+0x348/0x440
[ 97.937632] ? aq_vec_stop+0x72/0x80 [atlantic]
[ 97.937639] aq_nic_stop+0x1b6/0x1c0 [atlantic]
[ 97.937644] aq_suspend_common+0x88/0x90 [atlantic]
[ 97.937648] aq_pm_suspend_poweroff+0xe/0x20 [atlantic]
[ 97.937653] pci_pm_suspend+0x7e/0x1a0
[ 97.937655] ? pci_pm_suspend_noirq+0x2b0/0x2b0
[ 97.937657] dpm_run_callback+0x54/0x190
[ 97.937660] __device_suspend+0x14c/0x4d0
[ 97.937661] async_suspend+0x23/0x70
[ 97.937663] async_run_entry_fn+0x33/0x120
[ 97.937664] process_one_work+0x21f/0x3f0
[ 97.937666] worker_thread+0x4a/0x3c0
[ 97.937668] ? process_one_work+0x3f0/0x3f0
[ 97.937669] kthread+0xf0/0x120
[ 97.937671] ? kthread_complete_and_exit+0x20/0x20
[ 97.937672] ret_from_fork+0x22/0x30
[ 97.937676] </TASK>
v2. fixed "warning: variable 'aq_vec' set but not used"
v3. simplified a for loop
Fixes: 97bde5c4f9 ("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Link: https://lore.kernel.org/r/20220808081845.42005-1-acelan.kao@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
