commit ffa5f7a3bf upstream.
The new LARA-R6 product variant identified by the "01B" string can be
configured (by AT interface) in three different USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial
interface and 1 CDC-ECM virtual network interface
The first 4 interfaces of all the 3 USB configurations (default, RmNet,
CDC-ECM) are the same.
In default mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
In RmNet mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
If 4: RMNET interface
In CDC-ECM mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
If 4: CDC-ECM interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Link: https://lore.kernel.org/r/20230622092921.12651-1-davide.tronchin.94@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 501e197a02 ]
The st-rng driver uses devres to register itself with the hwrng core,
the driver will be unregistered from hwrng when its device goes out of
scope. This happens after the driver's remove function is called.
However, st-rng's clock is disabled in the remove function. There's a
short timeframe where st-rng is still registered with the hwrng core
although its clock is disabled. I suppose the clock must be active to
access the hardware and serve requests from the hwrng core.
Switch to devm_clk_get_enabled and let devres disable the clock and
unregister the hwrng. This avoids the race condition.
Fixes: 3e75241be8 ("hwrng: drivers - Use device-managed registration API")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad23756271 ]
This patch fixes an unused variable warning when this driver is
built-in with CONFIG_OF=n.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: 501e197a02 ("hwrng: st - keep clock enabled while hwrng is registered")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c907e72f58 ]
When the client received NFS4ERR_BADSESSION, it schedules recovery
and start the state manager thread which in turn freezes the
session table and does not allow for any new requests to use the
no-longer valid session. However, it is possible that before
the state manager thread runs, a new operation would use the
released slot that received BADSESSION and was therefore not
updated its sequence number. Such re-use of the slot can lead
the application errors.
Fixes: 5c441544f0 ("NFSv4.x: Handle bad/dead sessions correctly in nfs41_sequence_process()")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92e2921eea ]
ASM_NL is useful not only in *.S files but also in .c files for using
inline assembler in C code.
On ARC, however, ASM_NL is evaluated inconsistently. It is expanded to
a backquote (`) in *.S files, but a semicolon (;) in *.c files because
arch/arc/include/asm/linkage.h defines it inside #ifdef __ASSEMBLY__,
so the definition for C code falls back to the default value defined in
include/linux/linkage.h.
If ASM_NL is used in inline assembler in .c files, it will result in
wrong assembly code because a semicolon is not an instruction separator,
but the start of a comment for ARC.
Move ASM_NL (also __ALIGN and __ALIGN_STR) out of the #ifdef.
Fixes: 9df62f0544 ("arch: use ASM_NL instead of ';' for assembler new line character in the macro")
Fixes: 8d92e992a7 ("ARC: define __ALIGN_STR and __ALIGN symbols for ARC")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a3f1e573a ]
The > comparison should be >= to prevent an out of bounds array
access.
Fixes: 52dc0595d5 ("modpost: handle relocations mismatch in __ex_table.")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efbc7764c4 ]
Commit df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3") uncovered
a type mismatch in cesa 3des support that leads to a memcpy beyond the
end of a structure:
In function 'fortify_memcpy_chk',
inlined from 'mv_cesa_des3_ede_setkey' at drivers/crypto/marvell/cesa/cipher.c:307:2:
include/linux/fortify-string.h:583:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
583 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is probably harmless as the actual data that is copied has the correct
type, but clearly worth fixing nonetheless.
Fixes: 4ada483978 ("crypto: marvell/cesa - add Triple-DES support")
Cc: Kees Cook <keescook@chromium.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56a24b8ce6 ]
addend_arm_rel() processes R_ARM_PC24, R_ARM_CALL, R_ARM_JUMP24 in a
wrong way.
Here, test code.
[test code for R_ARM_JUMP24]
.section .init.text,"ax"
bar:
bx lr
.section .text,"ax"
.globl foo
foo:
b bar
[test code for R_ARM_CALL]
.section .init.text,"ax"
bar:
bx lr
.section .text,"ax"
.globl foo
foo:
push {lr}
bl bar
pop {pc}
If you compile it with ARM multi_v7_defconfig, modpost will show the
symbol name, (unknown).
WARNING: modpost: vmlinux.o: section mismatch in reference: foo (section: .text) -> (unknown) (section: .init.text)
(You need to use GNU linker instead of LLD to reproduce it.)
Fix the code to make modpost show the correct symbol name.
I imported (with adjustment) sign_extend32() from include/linux/bitops.h.
The '+8' is the compensation for pc-relative instruction. It is
documented in "ELF for the Arm Architecture" [1].
"If the relocation is pc-relative then compensation for the PC bias
(the PC value is 8 bytes ahead of the executing instruction in Arm
state and 4 bytes in Thumb state) must be encoded in the relocation
by the object producer."
[1]: https://github.com/ARM-software/abi-aa/blob/main/aaelf32/aaelf32.rst
Fixes: 56a974fa2d ("kbuild: make better section mismatch reports on arm")
Fixes: 6e2e340b59 ("ARM: 7324/1: modpost: Fix section warnings for ARM for many compilers")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7c63520f6 ]
addend_arm_rel() processes R_ARM_ABS32 in a wrong way.
Here, test code.
[test code 1]
#include <linux/init.h>
int __initdata foo;
int get_foo(void) { return foo; }
If you compile it with ARM versatile_defconfig, modpost will show the
symbol name, (unknown).
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> (unknown) (section: .init.data)
(You need to use GNU linker instead of LLD to reproduce it.)
If you compile it for other architectures, modpost will show the correct
symbol name.
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data)
For R_ARM_ABS32, addend_arm_rel() sets r->r_addend to a wrong value.
I just mimicked the code in arch/arm/kernel/module.c.
However, there is more difficulty for ARM.
Here, test code.
[test code 2]
#include <linux/init.h>
int __initdata foo;
int get_foo(void) { return foo; }
int __initdata bar;
int get_bar(void) { return bar; }
With this commit applied, modpost will show the following messages
for ARM versatile_defconfig:
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data)
WARNING: modpost: vmlinux.o: section mismatch in reference: get_bar (section: .text) -> foo (section: .init.data)
The reference from 'get_bar' to 'foo' seems wrong.
I have no solution for this because it is true in assembly level.
In the following output, relocation at 0x1c is no longer associated
with 'bar'. The two relocation entries point to the same symbol, and
the offset to 'bar' is encoded in the instruction 'r0, [r3, #4]'.
Disassembly of section .text:
00000000 <get_foo>:
0: e59f3004 ldr r3, [pc, #4] @ c <get_foo+0xc>
4: e5930000 ldr r0, [r3]
8: e12fff1e bx lr
c: 00000000 .word 0x00000000
00000010 <get_bar>:
10: e59f3004 ldr r3, [pc, #4] @ 1c <get_bar+0xc>
14: e5930004 ldr r0, [r3, #4]
18: e12fff1e bx lr
1c: 00000000 .word 0x00000000
Relocation section '.rel.text' at offset 0x244 contains 2 entries:
Offset Info Type Sym.Value Sym. Name
0000000c 00000c02 R_ARM_ABS32 00000000 .init.data
0000001c 00000c02 R_ARM_ABS32 00000000 .init.data
When find_elf_symbol() gets into a situation where relsym->st_name is
zero, there is no guarantee to get the symbol name as written in C.
I am keeping the current logic because it is useful in many architectures,
but the symbol name is not always correct depending on the optimization.
I left some comments in find_tosym().
Fixes: 56a974fa2d ("kbuild: make better section mismatch reports on arm")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b04b076fb5 ]
Fix build warnings when DEBUG_FS is not enabled by using an empty
do-while loop instead of a value:
In file included from ../drivers/crypto/nx/nx.c:27:
../drivers/crypto/nx/nx.c: In function 'nx_register_algs':
../drivers/crypto/nx/nx.h:173:33: warning: statement with no effect [-Wunused-value]
173 | #define NX_DEBUGFS_INIT(drv) (0)
../drivers/crypto/nx/nx.c:573:9: note: in expansion of macro 'NX_DEBUGFS_INIT'
573 | NX_DEBUGFS_INIT(&nx_driver);
../drivers/crypto/nx/nx.c: In function 'nx_remove':
../drivers/crypto/nx/nx.h:174:33: warning: statement with no effect [-Wunused-value]
174 | #define NX_DEBUGFS_FINI(drv) (0)
../drivers/crypto/nx/nx.c:793:17: note: in expansion of macro 'NX_DEBUGFS_FINI'
793 | NX_DEBUGFS_FINI(&nx_driver);
Also, there is no need to build nx_debugfs.o when DEBUG_FS is not
enabled, so change the Makefile to accommodate that.
Fixes: ae0222b728 ("powerpc/crypto: nx driver code supporting nx encryption")
Fixes: aef7b31c88 ("powerpc/crypto: Build files for the nx device driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Breno Leitão <leitao@debian.org>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Paulo Flabiano Smorigo <pfsmorigo@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac52578d6e ]
The virtio rng device kicks off a new entropy request whenever the
data available reaches zero. When a new request occurs at the end
of a read operation, that is, when the result of that request is
only needed by the next reader, then there is a race between the
writing of the new data and the next reader.
This is because there is no synchronisation whatsoever between the
writer and the reader.
Fix this by writing data_avail with smp_store_release and reading
it with smp_load_acquire when we first enter read. The subsequent
reads are safe because they're either protected by the first load
acquire, or by the completion mechanism.
Also remove the redundant zeroing of data_idx in random_recv_done
(data_idx must already be zero at this point) and data_avail in
request_entropy (ditto).
Reported-by: syzbot+726dc8c62c3536431ceb@syzkaller.appspotmail.com
Fixes: f7f510ec19 ("virtio: An entropy device, as suggested by hpa.")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bb31abdbe ]
When virtio-rng device was dropped by the hwrng core we were forced
to wait the buffer to come back from the device to not have
remaining ongoing operation that could spoil the buffer.
But now, as the buffer is internal to the virtio-rng we can release
the waiting loop immediately, the buffer will be retrieve and use
when the virtio-rng driver will be selected again.
This avoids to hang on an rng_current write command if the virtio-rng
device is blocked by a lack of entropy. This allows to select
another entropy source if the current one is empty.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20211028101111.128049-3-lvivier@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stable-dep-of: ac52578d6e ("hwrng: virtio - Fix race on data_avail and actual data")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf3175bc50 ]
hwrng core uses two buffers that can be mixed in the
virtio-rng queue.
If the buffer is provided with wait=0 it is enqueued in the
virtio-rng queue but unused by the caller.
On the next call, core provides another buffer but the
first one is filled instead and the new one queued.
And the caller reads the data from the new one that is not
updated, and the data in the first one are lost.
To avoid this mix, virtio-rng needs to use its own unique
internal buffer at a cost of a data copy to the caller buffer.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20211028101111.128049-2-lvivier@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stable-dep-of: ac52578d6e ("hwrng: virtio - Fix race on data_avail and actual data")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5835196a17 ]
Currently the getter returns ENOTSUPP on pin configured in
the push-pull mode. Fix this by adding the missed switch case.
Fixes: ccdf81d08d ("pinctrl: cherryview: add option to set open-drain pin config")
Fixes: 6e08d6bbeb ("pinctrl: Add Intel Cherryview/Braswell pin controller support")
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c60738de85 ]
Smatch reported:
1. drivers/pci/controller/pci-ftpci100.c:526 faraday_pci_probe() warn:
'clk' from clk_prepare_enable() not released on lines: 442,451,462,478,512,517.
2. drivers/pci/controller/pci-ftpci100.c:526 faraday_pci_probe() warn:
'p->bus_clk' from clk_prepare_enable() not released on lines: 451,462,478,512,517.
The clock resource is obtained by devm_clk_get(), and then
clk_prepare_enable() makes the clock resource ready for use. After that,
clk_disable_unprepare() should be called to release the clock resource
when it is no longer needed. However, while doing some error handling
in faraday_pci_probe(), clk_disable_unprepare() is not called to release
clk and p->bus_clk before returning. These return lines are exactly 442,
451, 462, 478, 512, 517.
Fix this warning by replacing devm_clk_get() with devm_clk_get_enabled(),
which is equivalent to devm_clk_get() + clk_prepare_enable(). And with
devm_clk_get_enabled(), the clock will automatically be disabled,
unprepared and freed when the device is unbound from the bus.
Link: https://lore.kernel.org/r/20230508043641.23807-1-yejunyan@hust.edu.cn
Fixes: b3c433efb8 ("PCI: faraday: Fix wrong pointer passed to PTR_ERR()")
Fixes: 2eeb02b285 ("PCI: faraday: Add clock handling")
Fixes: 783a862563 ("PCI: faraday: Use pci_parse_request_of_pci_ranges()")
Fixes: d3c68e0a7e ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver")
Fixes: f1e8bd21e3 ("PCI: faraday: Convert IRQ masking to raw PCI config accessors")
Signed-off-by: Junyan Ye <yejunyan@hust.edu.cn>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8afd0d9fc ]
If a PCIe hotplug slot has an Attention Button, the normal hot-add flow is:
- Slot is empty and slot power is off
- User inserts card in slot and presses Attention Button
- OS blinks Power Indicator for 5 seconds
- After 5 seconds, OS turns on Power Indicator, turns on slot power, and
enumerates the device
Previously, if a user pressed the Attention Button on an *empty* slot,
pciehp logged the following messages and blinked the Power Indicator
until a second button press:
[0.000] pciehp: Button press: will power on in 5 sec
[0.001] # Power Indicator starts blinking
[5.001] # 5 second timeout; slot is empty, so we should cancel the
request to power on and turn off Power Indicator
[7.000] # Power Indicator still blinking
[8.000] # possible card insertion
[9.000] pciehp: Button press: canceling request to power on
The first button press incorrectly left the slot in BLINKINGON_STATE, so
the second was interpreted as a "cancel power on" event regardless of
whether a card was present.
If the slot is empty, turn off the Power Indicator and return from
BLINKINGON_STATE to OFF_STATE after 5 seconds, effectively canceling the
request to power on. Putting the slot in OFF_STATE also means the second
button press will correctly request a slot power on if the slot is
occupied.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230512021518.336460-1-clementwei90@163.com
Fixes: d331710ea7 ("PCI: pciehp: Become resilient to missed events")
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 456d8aa37d ]
Struct pcie_link_state->downstream is a pointer to the pci_dev of function
0. Previously we retained that pointer when removing function 0, and
subsequent ASPM policy changes dereferenced it, resulting in a
use-after-free warning from KASAN, e.g.:
# echo 1 > /sys/bus/pci/devices/0000:03:00.0/remove
# echo powersave > /sys/module/pcie_aspm/parameters/policy
BUG: KASAN: slab-use-after-free in pcie_config_aspm_link+0x42d/0x500
Call Trace:
kasan_report+0xae/0xe0
pcie_config_aspm_link+0x42d/0x500
pcie_aspm_set_policy+0x8e/0x1a0
param_attr_store+0x162/0x2c0
module_attr_store+0x3e/0x80
PCIe spec r6.0, sec 7.5.3.7, recommends that software program the same ASPM
Control value in all functions of multi-function devices.
Disable ASPM and free the pcie_link_state when any child function is
removed so we can discard the dangling pcie_link_state->downstream pointer
and maintain the same ASPM Control configuration for all functions.
[bhelgaas: commit log and comment]
Debugged-by: Zongquan Qin <qinzongquan@sangfor.com.cn>
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Fixes: b5a0a9b59c ("PCI/ASPM: Read and set up L1 substate capabilities")
Link: https://lore.kernel.org/r/20230507034057.20970-1-dinghui@sangfor.com.cn
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f025312b08 ]
Smatch reported:
drivers/scsi/qedf/qedf_main.c:3056 qedf_alloc_global_queues()
warn: missing unwind goto?
At this point in the function, nothing has been allocated so we can return
directly. In particular the "qedf->global_queues" have not been allocated
so calling qedf_free_global_queues() will lead to a NULL dereference when
we check if (!gl[i]) and "gl" is NULL.
Fixes: 61d8658b4a ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Signed-off-by: Jinhong Zhu <jinhongzhu@hust.edu.cn>
Link: https://lore.kernel.org/r/20230502140022.2852-1-jinhongzhu@hust.edu.cn
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1becc57cd1 ]
Function rv740_get_decoded_reference_divider() may return 0 due to
unpredictable reference divider value calculated in
radeon_atom_get_clock_dividers(). This will lead to
division-by-zero error once that value is used as a divider
in calculating 'clk_s'.
While unlikely, this issue should nonetheless be prevented so add a
sanity check for such cases by testing 'decoded_ref' value against 0.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
v2: minor coding style fixes (Alex)
In practice this should actually happen as the vbios should be
properly populated.
Fixes: 66229b2005 ("drm/radeon/kms: add dpm support for rv7xx (v4)")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cabbdea1f1 ]
Pointer mqd_mem_obj can be deallocated in kfd_gtt_sa_allocate().
The function then returns non-zero value, which causes the second deallocation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d1f8f0d17d ("drm/amdkfd: Move non-sdma mqd allocation out of init_mqd")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd8958efe8 ]
Fix three sources of error involving struct sdma_txreq.num_descs.
When _extend_sdma_tx_descs() extends the descriptor array, it uses the
value of tx->num_descs to determine how many existing entries from the
tx's original, internal descriptor array to copy to the newly allocated
one. As this value was incremented before the call, the copy loop will
access one entry past the internal descriptor array, copying its contents
into the corresponding slot in the new array.
If the call to _extend_sdma_tx_descs() fails, _pad_smda_tx_descs() then
invokes __sdma_tx_clean() which uses the value of tx->num_desc to drive a
loop that unmaps all descriptor entries in use. As this value was
incremented before the call, the unmap loop will invoke sdma_unmap_desc()
on a descriptor entry whose contents consist of whatever random data was
copied into it during (1), leading to cascading further calls into the
kernel and driver using arbitrary data.
_sdma_close_tx() was using tx->num_descs instead of tx->num_descs - 1.
Fix all of the above by:
- Only increment .num_descs after .descp is extended.
- Use .num_descs - 1 instead of .num_descs for last .descp entry.
Fixes: f4d26d81ad ("staging/rdma/hfi1: Add coalescing support for SDMA TX descriptors")
Link: https://lore.kernel.org/r/167656658879.2223096.10026561343022570690.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com>
Signed-off-by: Patrick Kelsey <pat.kelsey@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b1a78babd ]
Fix build errors in soc/fsl/qe/usb.c when QUICC_ENGINE is not set.
This happens when PPC_EP88XC is set, which selects CPM1 & CPM.
When CPM is set, USB_FSL_QE can be set without QUICC_ENGINE
being set. When USB_FSL_QE is set, QE_USB deafults to y, which
causes build errors when QUICC_ENGINE is not set. Making
QE_USB depend on QUICC_ENGINE prevents QE_USB from defaulting to y.
Fixes these build errors:
drivers/soc/fsl/qe/usb.o: in function `qe_usb_clock_set':
usb.c:(.text+0x1e): undefined reference to `qe_immr'
powerpc-linux-ld: usb.c:(.text+0x2a): undefined reference to `qe_immr'
powerpc-linux-ld: usb.c:(.text+0xbc): undefined reference to `qe_setbrg'
powerpc-linux-ld: usb.c:(.text+0xca): undefined reference to `cmxgcr_lock'
powerpc-linux-ld: usb.c:(.text+0xce): undefined reference to `cmxgcr_lock'
Fixes: 5e41486c40 ("powerpc/QE: add support for QE USB clocks routing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202301101500.pillNv6R-lkp@intel.com/
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Leo Li <leoyang.li@nxp.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Qiang Zhao <qiang.zhao@nxp.com>
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Nicolas Schier <nicolas@jasle.eu>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60413129ee ]
When using the codec through the generic audio graph card, there are at
least two calls of es8316_set_dai_sysclk(), with the effect of limiting
the allowed sample rates according to the MCLK/LRCK ratios supported by
the codec:
1. During audio card setup, to set the initial MCLK - see
asoc_simple_init_dai().
2. Before opening a stream, to update MCLK, according to the stream
sample rate and the multiplication factor - see
asoc_simple_hw_params().
In some cases the initial MCLK might be set to a frequency that doesn't
match any of the supported ratios, e.g. 12287999 instead of 12288000,
which is only 1 Hz below the supported clock, as that is what the
hardware reports. This creates an empty list of rate constraints, which
is further passed to snd_pcm_hw_constraint_list() via
es8316_pcm_startup(), and causes the following error on the very first
access of the sound card:
$ speaker-test -D hw:Analog,0 -F S16_LE -c 2 -t wav
Broken configuration for playback: no configurations available: Invalid argument
Setting of hwparams failed: Invalid argument
Note that all subsequent retries succeed thanks to the updated MCLK set
at point 2 above, which uses a computed frequency value instead of a
reading from the hardware registers. Normally this would have mitigated
the issue, but es8316_pcm_startup() executes before the 2nd call to
es8316_set_dai_sysclk(), hence it cannot make use of the updated
constraints.
Since es8316_pcm_hw_params() performs anyway a final validation of MCLK
against the stream sample rate and the supported MCLK/LRCK ratios, fix
the issue by ensuring that sysclk_constraints list is only set when at
least one supported sample rate is autodetected by the codec.
Fixes: b8b88b7087 ("ASoC: add es8316 codec driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230530181140.483936-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f07342903 ]
The following error occurs when trying to restore a previously saved
ALSA mixer state (tested on a Rock 5B board):
$ alsactl --no-ucm -f /tmp/asound.state store hw:Analog
$ alsactl --no-ucm -I -f /tmp/asound.state restore hw:Analog
alsactl: set_control:1475: Cannot write control '2:0:0:ALC Capture Target Volume:0' : Invalid argument
According to ES8316 datasheet, the register at address 0x2B, which is
related to the above mixer control, contains by default the value 0xB0.
Considering the corresponding ALC target bits (ALCLVL) are 7:4, the
control is initialized with 11, which is one step above the maximum
value allowed by the driver:
ALCLVL | dB gain
-------+--------
0000 | -16.5
0001 | -15.0
0010 | -13.5
.... | .....
0111 | -6.0
1000 | -4.5
1001 | -3.0
1010 | -1.5
.... | .....
1111 | -1.5
The tests performed using the VU meter feature (--vumeter=TYPE) of
arecord/aplay confirm the specs are correct and there is no measured
gain if the 1011-1111 range would have been mapped to 0 dB:
dB gain | VU meter %
--------+-----------
-6.0 | 30-31
-4.5 | 35-36
-3.0 | 42-43
-1.5 | 50-51
0.0 | 50-51
Increment the max value allowed for ALC Capture Target Volume control,
so that it matches the hardware default. Additionally, update the
related TLV to prevent an artificial extension of the dB gain range.
Fixes: b8b88b7087 ("ASoC: add es8316 codec driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230530181140.483936-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 419013740e ]
ep93xx_clocksource_read() is only called from the file it is declared in,
while ep93xx_timer_init() is declared in a header that is not included here.
arch/arm/mach-ep93xx/timer-ep93xx.c:120:13: error: no previous prototype for 'ep93xx_timer_init'
arch/arm/mach-ep93xx/timer-ep93xx.c:63:5: error: no previous prototype for 'ep93xx_clocksource_read'
Fixes: 000bc17817 ("ARM: ep93xx: switch to GENERIC_CLOCKEVENTS")
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20230516153109.514251-3-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f24b495508 ]
The previous setting was related to the overall dimension and not to the
active display area.
In the "PHYSICAL SPECIFICATIONS" section, the datasheet shows the
following parameters:
----------------------------------------------------------
| Item | Specifications | unit |
----------------------------------------------------------
| Display area | 98.7 (W) x 57.5 (H) | mm |
----------------------------------------------------------
| Overall dimension | 105.5(W) x 67.2(H) x 4.96(D) | mm |
----------------------------------------------------------
Fixes: 966fea78ad ("drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
[narmstrong: fixed Fixes commit id length]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230516085039.3797303-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ffec92e70 ]
The model property should be at the top level, let's move it out
of the pinctrl node.
Fixes: d2eaf949d2 ("ARM: dts: omap3-gta04a5one: define GTA04A5 variant with OneNAND")
Cc: Andreas Kemnade <andreas@kemnade.info>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 123ee07ba5 ]
Smatch reports:
drivers/gpu/drm/sun4i/sun4i_tcon.c:805 sun4i_tcon_init_clocks() warn:
'tcon->clk' from clk_prepare_enable() not released on lines: 792,801.
In the function sun4i_tcon_init_clocks(), tcon->clk and tcon->sclk0 are
not disabled in the error handling, which affects the release of
these variable. Although sun4i_tcon_bind(), which calls
sun4i_tcon_init_clocks(), use sun4i_tcon_free_clocks to disable the
variables mentioned, but the error handling branch of
sun4i_tcon_init_clocks() ignores the required disable process.
To fix this issue, use the devm_clk_get_enabled to automatically
balance enable and disabled calls. As original implementation use
sun4i_tcon_free_clocks() to disable clk explicitly, we delete the
related calls and error handling that are no longer needed.
Fixes: 9026e0d122 ("drm: Add Allwinner A10 Display Engine support")
Fixes: b14e945bda ("drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init")
Fixes: 8e92404725 ("drm/sun4i: support TCONs without channel 1")
Fixes: 34d698f6e3 ("drm/sun4i: Add has_channel_0 TCON quirk")
Signed-off-by: XuDong Liu <m202071377@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230430112347.4689-1-m202071377@hust.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3c8e2c575 ]
There is no such property in the SPI controller binding documentation.
Also Linux driver doesn't look for it.
This fixes:
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: spi@18029200: Unevaluated properties are not allowed ('clock-names' was unexpected)
From schema: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230503122830.3200-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20c3dffdcc ]
Several calls to ci_dpm_fini() will attempt to free resources that
either have been freed before or haven't been allocated yet. This
may lead to undefined or dangerous behaviour.
For instance, if r600_parse_extended_power_table() fails, it might
call r600_free_extended_power_table() as will ci_dpm_fini() later
during error handling.
Fix this by only freeing pointers to objects previously allocated.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: cc8dbbb4f6 ("drm/radeon: add dpm support for CI dGPUs (v2)")
Co-developed-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
