Commit Graph

659955 Commits

Author SHA1 Message Date
Bob Peterson
f809d36062 gfs2: Don't skip dlm unlock if glock has an lvb
commit 78178ca844 upstream.

Patch fb6791d100 was designed to allow gfs2 to unmount quicker by
skipping the step where it tells dlm to unlock glocks in EX with lvbs.
This was done because when gfs2 unmounts a file system, it destroys the
dlm lockspace shortly after it destroys the glocks so it doesn't need to
unlock them all: the unlock is implied when the lockspace is destroyed
by dlm.

However, that patch introduced a use-after-free in dlm: as part of its
normal dlm_recoverd process, it can call ls_recovery to recover dead
locks. In so doing, it can call recover_rsbs which calls recover_lvb for
any mastered rsbs. Func recover_lvb runs through the list of lkbs queued
to the given rsb (if the glock is cached but unlocked, it will still be
queued to the lkb, but in NL--Unlocked--mode) and if it has an lvb,
copies it to the rsb, thus trying to preserve the lkb. However, when
gfs2 skips the dlm unlock step, it frees the glock and its lvb, which
means dlm's function recover_lvb references the now freed lvb pointer,
copying the freed lvb memory to the rsb.

This patch changes the check in gdlm_put_lock so that it calls
dlm_unlock for all glocks that contain an lvb pointer.

Fixes: fb6791d100 ("GFS2: skip dlm_unlock calls in unmount")
Cc: stable@vger.kernel.org # v3.8+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:56 +09:00
Al Viro
cc452cbd72 sparc32: fix a user-triggerable oops in clear_user()
commit 7780918b36 upstream.

Back in 2.1.29 the clear_user() guts (__bzero()) had been merged
with memset().  Unfortunately, while all exception handlers had been
copied, one of the exception table entries got lost.  As the result,
clear_user() starting at 128*n bytes before the end of page and
spanning between 8 and 127 bytes into the next page would oops when
the second page is unmapped.  It's trivial to reproduce - all
it takes is

main()
{
	int fd = open("/dev/zero", O_RDONLY);
	char *p = mmap(NULL, 16384, PROT_READ|PROT_WRITE,
			MAP_PRIVATE|MAP_ANON, -1, 0);
	munmap(p + 8192, 8192);
	read(fd, p + 8192 - 128, 192);
}

which had been oopsing since March 1997.  Says something about
the quality of test coverage... ;-/  And while today sparc32 port
is nearly dead, back in '97 it had been very much alive; in fact,
sparc64 had only been in mainline for 3 months by that point...

Cc: stable@kernel.org
Fixes: v2.1.29
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:55 +09:00
Chao Yu
f01547838b f2fs: fix out-of-repair __setattr_copy()
commit 2562515f0a upstream.

__setattr_copy() was copied from setattr_copy() in fs/attr.c, there is
two missing patches doesn't cover this inner function, fix it.

Commit 7fa294c899 ("userns: Allow chown and setgid preservation")
Commit 23adbe12ef ("fs,userns: Change inode_capable to capable_wrt_inode_uidgid")

Fixes: fbfa2cc58d ("f2fs: add file operations")
Cc: stable@vger.kernel.org
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:53 +09:00
Maxim Kiselev
76482f6f97 gpio: pcf857x: Fix missing first interrupt
commit a8002a3593 upstream.

If no n_latch value will be provided at driver probe then all pins will
be used as an input:

    gpio->out = ~n_latch;

In that case initial state for all pins is "one":

    gpio->status = gpio->out;

So if pcf857x IRQ happens with change pin value from "zero" to "one"
then we miss it, because of "one" from IRQ and "one" from initial state
leaves corresponding pin unchanged:
change = (gpio->status ^ status) & gpio->irq_enabled;

The right solution will be to read actual state at driver probe.

Cc: stable@vger.kernel.org
Fixes: 6e20a0a429 ("gpio: pcf857x: enable gpio_to_irq() support")
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:52 +09:00
Frank Li
d9b15cf18a mmc: sdhci-esdhc-imx: fix kernel panic when remove module
commit a56f44138a upstream.

In sdhci_esdhc_imx_remove() the SDHCI_INT_STATUS in read. Under some
circumstances, this may be done while the device is runtime suspended,
triggering the below splat.

Fix the problem by adding a pm_runtime_get_sync(), before reading the
register, which will turn on clocks etc making the device accessible again.

[ 1811.323148] mmc1: card aaaa removed
[ 1811.347483] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
[ 1811.354988] Modules linked in: sdhci_esdhc_imx(-) sdhci_pltfm sdhci cqhci mmc_block mmc_core [last unloaded: mmc_core]
[ 1811.365726] CPU: 0 PID: 3464 Comm: rmmod Not tainted 5.10.1-sd-99871-g53835a2e8186 #5
[ 1811.373559] Hardware name: Freescale i.MX8DXL EVK (DT)
[ 1811.378705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[ 1811.384723] pc : sdhci_esdhc_imx_remove+0x28/0x15c [sdhci_esdhc_imx]
[ 1811.391090] lr : platform_drv_remove+0x2c/0x50
[ 1811.395536] sp : ffff800012c7bcb0
[ 1811.398855] x29: ffff800012c7bcb0 x28: ffff00002c72b900
[ 1811.404181] x27: 0000000000000000 x26: 0000000000000000
[ 1811.409497] x25: 0000000000000000 x24: 0000000000000000
[ 1811.414814] x23: ffff0000042b3890 x22: ffff800009127120
[ 1811.420131] x21: ffff00002c4c9580 x20: ffff0000042d0810
[ 1811.425456] x19: ffff0000042d0800 x18: 0000000000000020
[ 1811.430773] x17: 0000000000000000 x16: 0000000000000000
[ 1811.436089] x15: 0000000000000004 x14: ffff000004019c10
[ 1811.441406] x13: 0000000000000000 x12: 0000000000000020
[ 1811.446723] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
[ 1811.452040] x9 : fefefeff6364626d x8 : 7f7f7f7f7f7f7f7f
[ 1811.457356] x7 : 78725e6473607372 x6 : 0000000080808080
[ 1811.462673] x5 : 0000000000000000 x4 : 0000000000000000
[ 1811.467990] x3 : ffff800011ac1cb0 x2 : 0000000000000000
[ 1811.473307] x1 : ffff8000091214d4 x0 : ffff8000133a0030
[ 1811.478624] Call trace:
[ 1811.481081]  sdhci_esdhc_imx_remove+0x28/0x15c [sdhci_esdhc_imx]
[ 1811.487098]  platform_drv_remove+0x2c/0x50
[ 1811.491198]  __device_release_driver+0x188/0x230
[ 1811.495818]  driver_detach+0xc0/0x14c
[ 1811.499487]  bus_remove_driver+0x5c/0xb0
[ 1811.503413]  driver_unregister+0x30/0x60
[ 1811.507341]  platform_driver_unregister+0x14/0x20
[ 1811.512048]  sdhci_esdhc_imx_driver_exit+0x1c/0x3a8 [sdhci_esdhc_imx]
[ 1811.518495]  __arm64_sys_delete_module+0x19c/0x230
[ 1811.523291]  el0_svc_common.constprop.0+0x78/0x1a0
[ 1811.528086]  do_el0_svc+0x24/0x90
[ 1811.531405]  el0_svc+0x14/0x20
[ 1811.534461]  el0_sync_handler+0x1a4/0x1b0
[ 1811.538474]  el0_sync+0x174/0x180
[ 1811.541801] Code: a9025bf5 f9403e95 f9400ea0 9100c000 (b9400000)
[ 1811.547902] ---[ end trace 3fb1a3bd48ff7be5 ]---

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org # v4.0+
Link: https://lore.kernel.org/r/20210210181933.29263-1-Frank.Li@nxp.com
[Ulf: Clarified the commit message a bit]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:51 +09:00
Fangrui Song
4d197ddb5f module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
commit ebfac7b778 upstream.

clang-12 -fno-pic (since
a084c0388e)
can emit `call __stack_chk_fail@PLT` instead of `call __stack_chk_fail`
on x86.  The two forms should have identical behaviors on x86-64 but the
former causes GNU as<2.37 to produce an unreferenced undefined symbol
_GLOBAL_OFFSET_TABLE_.

(On x86-32, there is an R_386_PC32 vs R_386_PLT32 difference but the
linker behavior is identical as far as Linux kernel is concerned.)

Simply ignore _GLOBAL_OFFSET_TABLE_ for now, like what
scripts/mod/modpost.c:ignore_undef_symbol does. This also fixes the
problem for gcc/clang -fpie and -fpic, which may emit `call foo@PLT` for
external function calls on x86.

Note: ld -z defs and dynamic loaders do not error for unreferenced
undefined symbols so the module loader is reading too much.  If we ever
need to ignore more symbols, the code should be refactored to ignore
unreferenced symbols.

Cc: <stable@vger.kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1250
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27178
Reported-by: Marco Elver <elver@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Marco Elver <elver@google.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:49 +09:00
Dan Williams
3f192d7b29 libnvdimm/dimm: Avoid race between probe and available_slots_show()
commit 7018c897c2 upstream

Richard reports that the following test:

(while true; do
     cat /sys/bus/nd/devices/nmem*/available_slots 2>&1 > /dev/null
 done) &

while true; do
     for i in $(seq 0 4); do
         echo nmem$i > /sys/bus/nd/drivers/nvdimm/bind
     done
     for i in $(seq 0 4); do
         echo nmem$i > /sys/bus/nd/drivers/nvdimm/unbind
     done
 done

...fails with a crash signature like:

    divide error: 0000 [#1] SMP KASAN PTI
    RIP: 0010:nd_label_nfree+0x134/0x1a0 [libnvdimm]
    [..]
    Call Trace:
     available_slots_show+0x4e/0x120 [libnvdimm]
     dev_attr_show+0x42/0x80
     ? memset+0x20/0x40
     sysfs_kf_seq_show+0x218/0x410

The root cause is that available_slots_show() consults driver-data, but
fails to synchronize against device-unbind setting up a TOCTOU race to
access uninitialized memory.

Validate driver-data under the device-lock.

Fixes: 4d88a97aa9 ("libnvdimm, nvdimm: dimm driver and base libnvdimm device-driver infrastructure")
Cc: <stable@vger.kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Coly Li <colyli@suse.com>
Reported-by: Richard Palethorpe <rpalethorpe@suse.com>
Acked-by: Richard Palethorpe <rpalethorpe@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
[sudip: use device_lock()]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:48 +09:00
Yoshihiro Shimoda
662d539359 usb: renesas_usbhs: Clear pipe running flag in usbhs_pkt_pop()
commit 9917f0e3cd upstream

Should clear the pipe running flag in usbhs_pkt_pop(). Otherwise,
we cannot use this pipe after dequeue was called while the pipe was
running.

Fixes: 8355b2b308 ("usb: renesas_usbhs: fix the behavior of some usbhs_pkt_handle")
Reported-by: Tho Vu <tho.vu.wh@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1612183640-8898-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:47 +09:00
Muchun Song
4409be3db4 mm: hugetlb: fix a race between freeing and dissolving the page
commit 7ffddd499b upstream

There is a race condition between __free_huge_page()
and dissolve_free_huge_page().

  CPU0:                         CPU1:

  // page_count(page) == 1
  put_page(page)
    __free_huge_page(page)
                                dissolve_free_huge_page(page)
                                  spin_lock(&hugetlb_lock)
                                  // PageHuge(page) && !page_count(page)
                                  update_and_free_page(page)
                                  // page is freed to the buddy
                                  spin_unlock(&hugetlb_lock)
      spin_lock(&hugetlb_lock)
      clear_page_huge_active(page)
      enqueue_huge_page(page)
      // It is wrong, the page is already freed
      spin_unlock(&hugetlb_lock)

The race window is between put_page() and dissolve_free_huge_page().

We should make sure that the page is already on the free list when it is
dissolved.

As a result __free_huge_page would corrupt page(s) already in the buddy
allocator.

Link: https://lkml.kernel.org/r/20210115124942.46403-4-songmuchun@bytedance.com
Fixes: c8721bbbdd ("mm: memory-hotplug: enable memory hotplug to handle hugepage")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:45 +09:00
Pan Bian
03833318af mtd: spi-nor: hisi-sfc: Put child node np on error path
commit fe6653460e upstream.

Put the child node np when it fails to get or register device.

Fixes: e523f11141 ("mtd: spi-nor: add hisilicon spi-nor flash controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Pan Bian <bianpan2016@163.com>
[ta: Add Fixes tag and Cc stable]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20210121091847.85362-1-bianpan2016@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:44 +09:00
Jiri Kosina
792a93190b floppy: reintroduce O_NDELAY fix
commit 8a0c014cd2 upstream.

This issue was originally fixed in 09954bad4 ("floppy: refactor open()
flags handling").

The fix as a side-effect, however, introduce issue for open(O_ACCMODE)
that is being used for ioctl-only open. I wrote a fix for that, but
instead of it being merged, full revert of 09954bad4 was performed,
re-introducing the O_NDELAY / O_NONBLOCK issue, and it strikes again.

This is a forward-port of the original fix to current codebase; the
original submission had the changelog below:

====
Commit 09954bad4 ("floppy: refactor open() flags handling"), as a
side-effect, causes open(/dev/fdX, O_ACCMODE) to fail. It turns out that
this is being used setfdprm userspace for ioctl-only open().

Reintroduce back the original behavior wrt !(FMODE_READ|FMODE_WRITE)
modes, while still keeping the original O_NDELAY bug fixed.

Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2101221209060.5622@cbobk.fhfr.pm
Cc: stable@vger.kernel.org
Reported-by: Wim Osterholt <wim@djo.tudelft.nl>
Tested-by: Wim Osterholt <wim@djo.tudelft.nl>
Reported-and-tested-by: Kurt Garloff <kurt@garloff.de>
Fixes: 09954bad4 ("floppy: refactor open() flags handling")
Fixes: f2791e7ead ("Revert "floppy: refactor open() flags handling"")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:43 +09:00
Sean Christopherson
0b7e410766 x86/reboot: Force all cpus to exit VMX root if VMX is supported
commit ed72736183 upstream.

Force all CPUs to do VMXOFF (via NMI shootdown) during an emergency
reboot if VMX is _supported_, as VMX being off on the current CPU does
not prevent other CPUs from being in VMX root (post-VMXON).  This fixes
a bug where a crash/panic reboot could leave other CPUs in VMX root and
prevent them from being woken via INIT-SIPI-SIPI in the new kernel.

Fixes: d176720d34 ("x86: disable VMX on all CPUs on reboot")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David P. Reed <dpreed@deepplum.com>
[sean: reworked changelog and further tweaked comment]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20201231002702.2223707-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:42 +09:00
Martin Kaiser
c74b40f971 staging: rtl8188eu: Add Edimax EW-7811UN V2 to device table
commit 7a8d2f1908 upstream.

The Edimax EW-7811UN V2 uses an RTL8188EU chipset and works with this
driver.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210204085217.9743-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:40 +09:00
Sabyrzhan Tasbolatov
123490e63c drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
commit 2fd10bcf03 upstream.

syzbot found WARNING in qp_broker_alloc[1] in qp_host_alloc_queue()
when num_pages is 0x100001, giving queue_size + queue_page_size
bigger than KMALLOC_MAX_SIZE for kzalloc(), resulting order >= MAX_ORDER
condition.

queue_size + queue_page_size=0x8000d8, where KMALLOC_MAX_SIZE=0x400000.

[1]
Call Trace:
 alloc_pages include/linux/gfp.h:547 [inline]
 kmalloc_order+0x40/0x130 mm/slab_common.c:837
 kmalloc_order_trace+0x15/0x70 mm/slab_common.c:853
 kmalloc_large include/linux/slab.h:481 [inline]
 __kmalloc+0x257/0x330 mm/slub.c:3959
 kmalloc include/linux/slab.h:557 [inline]
 kzalloc include/linux/slab.h:682 [inline]
 qp_host_alloc_queue drivers/misc/vmw_vmci/vmci_queue_pair.c:540 [inline]
 qp_broker_create drivers/misc/vmw_vmci/vmci_queue_pair.c:1351 [inline]
 qp_broker_alloc+0x936/0x2740 drivers/misc/vmw_vmci/vmci_queue_pair.c:1739

Reported-by: syzbot+15ec7391f3d6a1a7cc7d@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Link: https://lore.kernel.org/r/20210209102612.2112247-1-snovitoll@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:39 +09:00
Paul Cercueil
165bd47b0d seccomp: Add missing return in non-void function
commit 04b38d0125 upstream.

We don't actually care about the value, since the kernel will panic
before that; but a value should nonetheless be returned, otherwise the
compiler will complain.

Fixes: 8112c4f140 ("seccomp: remove 2-phase API")
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210111172839.640914-1-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:38 +09:00
Filipe Manana
24c06f69d0 btrfs: fix extent buffer leak on failure to copy root
commit 72c9925f87 upstream.

At btrfs_copy_root(), if the call to btrfs_inc_ref() fails we end up
returning without unlocking and releasing our reference on the extent
buffer named "cow" we previously allocated with btrfs_alloc_tree_block().

So fix that by unlocking the extent buffer and dropping our reference on
it before returning.

Fixes: be20aa9dba ("Btrfs: Add mount option to turn off data cow")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:36 +09:00
Josef Bacik
d792a2d692 btrfs: fix reloc root leak with 0 ref reloc roots on recovery
commit c78a10aebb upstream.

When recovering a relocation, if we run into a reloc root that has 0
refs we simply add it to the reloc_control->reloc_roots list, and then
clean it up later.  The problem with this is __del_reloc_root() doesn't
do anything if the root isn't in the radix tree, which in this case it
won't be because we never call __add_reloc_root() on the reloc_root.

This exit condition simply isn't correct really.  During normal
operation we can remove ourselves from the rb tree and then we're meant
to clean up later at merge_reloc_roots() time, and this happens
correctly.  During recovery we're depending on free_reloc_roots() to
drop our references, but we're short-circuiting.

Fix this by continuing to check if we're on the list and dropping
ourselves from the reloc_control root list and dropping our reference
appropriately.  Change the corresponding BUG_ON() to an ASSERT() that
does the correct thing if we aren't in the rb tree.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:35 +09:00
Josef Bacik
63a49862df btrfs: abort the transaction if we fail to inc ref in btrfs_copy_root
commit 867ed321f9 upstream.

While testing my error handling patches, I added a error injection site
at btrfs_inc_extent_ref, to validate the error handling I added was
doing the correct thing.  However I hit a pretty ugly corruption while
doing this check, with the following error injection stack trace:

btrfs_inc_extent_ref
  btrfs_copy_root
    create_reloc_root
      btrfs_init_reloc_root
	btrfs_record_root_in_trans
	  btrfs_start_transaction
	    btrfs_update_inode
	      btrfs_update_time
		touch_atime
		  file_accessed
		    btrfs_file_mmap

This is because we do not catch the error from btrfs_inc_extent_ref,
which in practice would be ENOMEM, which means we lose the extent
references for a root that has already been allocated and inserted,
which is the problem.  Fix this by aborting the transaction if we fail
to do the reference modification.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:33 +09:00
Jarkko Sakkinen
b8f9c3ef28 KEYS: trusted: Fix migratable=1 failing
commit 8da7520c80 upstream.

Consider the following transcript:

$ keyctl add trusted kmk "new 32 blobauth=helloworld keyhandle=80000000 migratable=1" @u
add_key: Invalid argument

The documentation has the following description:

  migratable=   0|1 indicating permission to reseal to new PCR values,
                default 1 (resealing allowed)

The consequence is that "migratable=1" should succeed. Fix this by
allowing this condition to pass instead of return -EINVAL.

[*] Documentation/security/keys/trusted-encrypted.rst

Cc: stable@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Fixes: d00a1c72f7 ("keys: add new trusted key-type")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:32 +09:00
Thinh Nguyen
6582c93464 usb: dwc3: gadget: Fix dep->interval for fullspeed interrupt
commit 4b049f55ed upstream.

The dep->interval captures the number of frames/microframes per interval
from bInterval. Fullspeed interrupt endpoint bInterval is the number of
frames per interval and not 2^(bInterval - 1). So fix it here. This
change is only for debugging purpose and should not affect the interrupt
endpoint operation.

Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/1263b563dedc4ab8b0fb854fba06ce4bc56bd495.1612820995.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:31 +09:00
Thinh Nguyen
5b539d8aa8 usb: dwc3: gadget: Fix setting of DEPCFG.bInterval_m1
commit a1679af85b upstream.

Valid range for DEPCFG.bInterval_m1 is from 0 to 13, and it must be set
to 0 when the controller operates in full-speed. See the programming
guide for DEPCFG command section 3.2.2.1 (v3.30a).

Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/3f57026f993c0ce71498dbb06e49b3a47c4d0265.1612820995.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:30 +09:00
Dan Carpenter
9bd5eb396f USB: serial: mos7720: fix error code in mos7720_write()
commit fea7372cbc upstream.

This code should return -ENOMEM if the kmalloc() fails but instead
it returns success.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 0f64478cbc ("USB: add USB serial mos7720 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:29 +09:00
Dan Carpenter
f5bea2bdec USB: serial: mos7840: fix error code in mos7840_write()
commit a70aa7dc60 upstream.

This should return -ENOMEM instead of 0 if the kmalloc() fails.

Fixes: 3f5429746d ("USB: Moschip 7840 USB-Serial Driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:27 +09:00
Paul Cercueil
50cf1cac78 usb: musb: Fix runtime PM race in musb_queue_resume_work
commit 0eaa1a3714 upstream.

musb_queue_resume_work() would call the provided callback if the runtime
PM status was 'active'. Otherwise, it would enqueue the request if the
hardware was still suspended (musb->is_runtime_suspended is true).

This causes a race with the runtime PM handlers, as it is possible to be
in the case where the runtime PM status is not yet 'active', but the
hardware has been awaken (PM resume function has been called).

When hitting the race, the resume work was not enqueued, which probably
triggered other bugs further down the stack. For instance, a telnet
connection on Ingenic SoCs would result in a 50/50 chance of a
segmentation fault somewhere in the musb code.

Rework the code so that either we call the callback directly if
(musb->is_runtime_suspended == 0), or enqueue the query otherwise.

Fixes: ea2f35c01d ("usb: musb: Fix sleeping function called from invalid context for hdrc glue")
Cc: stable@vger.kernel.org # v4.9+
Tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210123142502.16980-1-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:26 +09:00
Lech Perczak
a3028ee775 USB: serial: option: update interface mapping for ZTE P685M
commit 6420a56950 upstream.

This patch prepares for qmi_wwan driver support for the device.
Previously "option" driver mapped itself to interfaces 0 and 3 (matching
ff/ff/ff), while interface 3 is in fact a QMI port.
Interfaces 1 and 2 (matching ff/00/00) expose AT commands,
and weren't supported previously at all.
Without this patch, a possible conflict would exist if device ID was
added to qmi_wwan driver for interface 3.

Update and simplify device ID to match interfaces 0-2 directly,
to expose QCDM (0), PCUI (1), and modem (2) ports and avoid conflict
with QMI (3), and ADB (4).

The modem is used inside ZTE MF283+ router and carriers identify it as
such.
Interface mapping is:
0: QCDM, 1: AT (PCUI), 2: AT (Modem), 3: QMI, 4: ADB

T:  Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=1275 Rev=f0.00
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE Technologies MSM
S:  SerialNumber=P685M510ZTED0000CP&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&0
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=87(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Cc: Johan Hovold <johan@kernel.org>
Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Link: https://lore.kernel.org/r/20210207005443.12936-1-lech.perczak@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:25 +09:00
Marcos Paulo de Souza
94f14d41db Input: i8042 - add ASUS Zenbook Flip to noselftest list
commit b5d6e7ab7f upstream.

After commit 77b425399f ("Input: i8042 - use chassis info to skip
selftest on Asus laptops"), all modern Asus laptops have the i8042
selftest disabled. It has done by using chassys type "10" (laptop).

The Asus Zenbook Flip suffers from similar suspend/resume issues, but
it _sometimes_ work and sometimes it doesn't. Setting noselftest makes
it work reliably. In this case, we need to add chassis type "31"
(convertible) in order to avoid selftest in this device.

Reported-by: Ludvig Norgren Guldhag <ludvigng@gmail.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Link: https://lore.kernel.org/r/20210219164638.761-1-mpdesouza@suse.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:24 +09:00
Dan Carpenter
567afa017f Input: joydev - prevent potential read overflow in ioctl
commit 182d679b22 upstream.

The problem here is that "len" might be less than "joydev->nabs" so the
loops which verfy abspam[i] and keypam[] might read beyond the buffer.

Fixes: 999b874f4a ("Input: joydev - validate axis/button maps before clobbering current ones")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YCyzR8WvFRw4HWw6@mwanda
[dtor: additional check for len being even in joydev_handle_JSIOCSBTNMAP]
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:23 +09:00
Olivier Crête
dc0910313e Input: xpad - add support for PowerA Enhanced Wired Controller for Xbox Series X|S
commit 42ffcd1dba upstream.

Signed-off-by: Olivier Crête <olivier.crete@ocrete.ca>
Link: https://lore.kernel.org/r/20210204005318.615647-1-olivier.crete@collabora.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:22 +09:00
jeffrey.lin
c0e833513e Input: raydium_ts_i2c - do not send zero length
commit fafd320ae5 upstream.

Add default write command package to prevent i2c quirk error of zero
data length as Raydium touch firmware update is executed.

Signed-off-by: jeffrey.lin <jeffrey.lin@rad-ic.com>
Link: https://lore.kernel.org/r/1608031217-7247-1-git-send-email-jeffrey.lin@raydium.corp-partner.google.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:20 +09:00
Qinglang Miao
baf2e1756a ACPI: configfs: add missing check after configfs_register_default_group()
commit 67e40054de upstream.

A list_add corruption is reported by Hulk Robot like this:
==============
list_add corruption.
Call Trace:
link_obj+0xc0/0x1c0
link_group+0x21/0x140
configfs_register_subsystem+0xdb/0x380
acpi_configfs_init+0x25/0x1000 [acpi_configfs]
do_one_initcall+0x149/0x820
do_init_module+0x1ef/0x720
load_module+0x35c8/0x4380
__do_sys_finit_module+0x10d/0x1a0
do_syscall_64+0x34/0x80

It's because of the missing check after configfs_register_default_group,
where configfs_unregister_subsystem should be called once failure.

Fixes: 612bd01fc6 ("ACPI: add support for loading SSDTs via configfs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:19 +09:00
Mikulas Patocka
54492f9847 blk-settings: align max_sectors on "logical_block_size" boundary
commit 97f433c360 upstream.

We get I/O errors when we run md-raid1 on the top of dm-integrity on the
top of ramdisk.
device-mapper: integrity: Bio not aligned on 8 sectors: 0xff00, 0xff
device-mapper: integrity: Bio not aligned on 8 sectors: 0xff00, 0xff
device-mapper: integrity: Bio not aligned on 8 sectors: 0xffff, 0x1
device-mapper: integrity: Bio not aligned on 8 sectors: 0xffff, 0x1
device-mapper: integrity: Bio not aligned on 8 sectors: 0x8048, 0xff
device-mapper: integrity: Bio not aligned on 8 sectors: 0x8147, 0xff
device-mapper: integrity: Bio not aligned on 8 sectors: 0x8246, 0xff
device-mapper: integrity: Bio not aligned on 8 sectors: 0x8345, 0xbb

The ramdisk device has logical_block_size 512 and max_sectors 255. The
dm-integrity device uses logical_block_size 4096 and it doesn't affect the
"max_sectors" value - thus, it inherits 255 from the ramdisk. So, we have
a device with max_sectors not aligned on logical_block_size.

The md-raid device sees that the underlying leg has max_sectors 255 and it
will split the bios on 255-sector boundary, making the bios unaligned on
logical_block_size.

In order to fix the bug, we round down max_sectors to logical_block_size.

Cc: stable@vger.kernel.org
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16 10:38:18 +09:00
Randy Dunlap
bc6a2b5db7 scsi: bnx2fc: Fix Kconfig warning & CNIC build errors
[ Upstream commit eefb816acb ]

CNIC depends on MMU, but since 'select' does not follow any dependency
chains, SCSI_BNX2X_FCOE also needs to depend on MMU, so that erroneous
configs are not generated, which cause build errors in cnic.

WARNING: unmet direct dependencies detected for CNIC
  Depends on [n]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && PCI [=y] && (IPV6 [=n] || IPV6 [=n]=n) && MMU [=n]
  Selected by [y]:
  - SCSI_BNX2X_FCOE [=y] && SCSI_LOWLEVEL [=y] && SCSI [=y] && PCI [=y] && (IPV6 [=n] || IPV6 [=n]=n) && LIBFC [=y] && LIBFCOE [=y]

riscv64-linux-ld: drivers/net/ethernet/broadcom/cnic.o: in function `.L154':
cnic.c:(.text+0x1094): undefined reference to `uio_event_notify'
riscv64-linux-ld: cnic.c:(.text+0x10bc): undefined reference to `uio_event_notify'
riscv64-linux-ld: drivers/net/ethernet/broadcom/cnic.o: in function `.L1442':
cnic.c:(.text+0x96a8): undefined reference to `__uio_register_device'
riscv64-linux-ld: drivers/net/ethernet/broadcom/cnic.o: in function `.L0 ':
cnic.c:(.text.unlikely+0x68): undefined reference to `uio_unregister_device'

Link: https://lore.kernel.org/r/20210213192428.22537-1-rdunlap@infradead.org
Fixes: 853e2bd210 ("[SCSI] bnx2fc: Broadcom FCoE offload driver")
Cc: Saurav Kashyap <skashyap@marvell.com>
Cc: Javed Hasan <jhasan@marvell.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-16 10:38:16 +09:00
Maxime Ripard
8d7e001e51 i2c: brcmstb: Fix brcmstd_send_i2c_cmd condition
[ Upstream commit a1858ce0cf ]

The brcmstb_send_i2c_cmd currently has a condition that is (CMD_RD ||
CMD_WR) which always evaluates to true, while the obvious fix is to test
whether the cmd variable passed as parameter holds one of these two
values.

Fixes: dd1aa2524b ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver")
Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-16 10:38:15 +09:00
Marc Zyngier
d96b213fff arm64: Add missing ISB after invalidating TLB in __primary_switch
[ Upstream commit 9d41053e8d ]

Although there has been a bit of back and forth on the subject, it
appears that invalidating TLBs requires an ISB instruction when FEAT_ETS
is not implemented by the CPU.

From the bible:

  | In an implementation that does not implement FEAT_ETS, a TLB
  | maintenance instruction executed by a PE, PEx, can complete at any
  | time after it is issued, but is only guaranteed to be finished for a
  | PE, PEx, after the execution of DSB by the PEx followed by a Context
  | synchronization event

Add the missing ISB in __primary_switch, just in case.

Fixes: 3c5e9f238b ("arm64: head.S: move KASLR processing out of __enable_mmu()")
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210224093738.3629662-3-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-16 10:38:13 +09:00
Miaohe Lin
3b0531992c mm/hugetlb: fix potential double free in hugetlb_register_node() error path
[ Upstream commit cc2205a67d ]

In hugetlb_sysfs_add_hstate(), we would do kobject_put() on hstate_kobjs
when failed to create sysfs group but forget to set hstate_kobjs to NULL.
Then in hugetlb_register_node() error path, we may free it again via
hugetlb_unregister_node().

Link: https://lkml.kernel.org/r/20210107123249.36964-1-linmiaohe@huawei.com
Fixes: a343787016 ("hugetlb: new sysfs interface")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <smuchun@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-16 10:38:12 +09:00
Miaohe Lin
dd67e373f5 mm/memory.c: fix potential pte_unmap_unlock pte error
[ Upstream commit 90a3e375d3 ]

Since commit 42e4089c78 ("x86/speculation/l1tf: Disallow non privileged
high MMIO PROT_NONE mappings"), when the first pfn modify is not allowed,
we would break the loop with pte unchanged.  Then the wrong pte - 1 would
be passed to pte_unmap_unlock.

Andi said:

 "While the fix is correct, I'm not sure if it actually is a real bug.
  Is there any architecture that would do something else than unlocking
  the underlying page? If it's just the underlying page then it should
  be always the same page, so no bug"

Link: https://lkml.kernel.org/r/20210109080118.20885-1-linmiaohe@huawei.com
Fixes: 42e4089c78 ("x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings")
Signed-off-by: Hongxiang Lou <louhongxiang@huawei.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-16 10:38:11 +09:00
Dan Carpenter
2df856dd94 ocfs2: fix a use after free on error
[ Upstream commit c57d117f2b ]

The error handling in this function frees "reg" but it is still on the
"o2hb_all_regions" list so it will lead to a use after freew.  Joseph Qi
points out that we need to clear the bit in the "o2hb_region_bitmap" as
well

Link: https://lkml.kernel.org/r/YBk4M6HUG8jB/jc7@mwanda
Fixes: 1cf257f511 ("ocfs2: fix memory leak")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-16 10:38:10 +09:00
Chuhong Yuan
76b392aa27 net/mlx4_core: Add missed mlx4_free_cmd_mailbox()
[ Upstream commit 8eb65fda4a ]

mlx4_do_mirror_rule() forgets to call mlx4_free_cmd_mailbox() to
free the memory region allocated by mlx4_alloc_cmd_mailbox() before
an exit.
Add the missed call to fix it.

Fixes: 78efed2751 ("net/mlx4_core: Support mirroring VF DMFS rules on both ports")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20210221143559.390277-1-hslester96@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-16 10:38:09 +09:00
Slawomir Laba
e5d0200c72 i40e: Fix flow for IPv6 next header (extension header)
[ Upstream commit 92c6058024 ]

When a packet contains an IPv6 header with next header which is
an extension header and not a protocol one, the kernel function
skb_transport_header called with such sk_buff will return a
pointer to the extension header and not to the TCP one.

The above explained call caused a problem with packet processing
for skb with encapsulation for tunnel with I40E_TX_CTX_EXT_IP_IPV6.
The extension header was not skipped at all.

The ipv6_skip_exthdr function does check if next header of the IPV6
header is an extension header and doesn't modify the l4_proto pointer
if it points to a protocol header value so its safe to omit the
comparison of exthdr and l4.hdr pointers. The ipv6_skip_exthdr can
return value -1. This means that the skipping process failed
and there is something wrong with the packet so it will be dropped.

Fixes: a3fd9d8876 ("i40e/i40evf: Handle IPv6 extension headers in checksum offload")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-16 10:38:08 +09:00
Konrad Dybcio
84cbfa272b drm/msm/dsi: Correct io_start for MSM8994 (20nm PHY)
[ Upstream commit 33a7808ce1 ]

The previous registers were *almost* correct, but instead of
PHYs, they were pointing at DSI PLLs, resulting in the PHY id
autodetection failing miserably.

Fixes: dcefc117cc ("drm/msm/dsi: Add support for msm8x94")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-16 10:38:06 +09:00
Heiner Kallweit
db165d391e PCI: Align checking of syscall user config accessors
[ Upstream commit ef9e4005cb ]

After 34e3207205 ("PCI: handle positive error codes"),
pci_user_read_config_*() and pci_user_write_config_*() return 0 or negative
errno values, not PCIBIOS_* values like PCIBIOS_SUCCESSFUL or
PCIBIOS_BAD_REGISTER_NUMBER.

Remove comparisons with PCIBIOS_SUCCESSFUL and check only for non-zero.  It
happens that PCIBIOS_SUCCESSFUL is zero, so this is not a functional
change, but it aligns this code with the user accessors.

[bhelgaas: commit log]
Fixes: 34e3207205 ("PCI: handle positive error codes")
Link: https://lore.kernel.org/r/f1220314-e518-1e18-bf94-8e6f8c703758@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-16 10:38:05 +09:00
Jorgen Hansen
f273a8fec0 VMCI: Use set_page_dirty_lock() when unregistering guest memory
[ Upstream commit 5a16c53540 ]

When the VMCI host support releases guest memory in the case where
the VM was killed, the pinned guest pages aren't locked. Use
set_page_dirty_lock() instead of set_page_dirty().

Testing done: Killed VM while having an active VMCI based vSocket
connection and observed warning from ext4. With this fix, no
warning was observed. Ran various vSocket tests without issues.

Fixes: 06164d2b72 ("VMCI: queue pairs implementation.")
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/1611160360-30299-1-git-send-email-jhansen@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-16 10:38:04 +09:00
Simon South
e10d8dbf8e pwm: rockchip: rockchip_pwm_probe(): Remove superfluous clk_unprepare()
[ Upstream commit d5d8d67586 ]

If rockchip_pwm_probe() fails to register a PWM device it calls
clk_unprepare() for the device's PWM clock, without having first disabled
the clock and before jumping to an error handler that also unprepares
it. This is likely to produce warnings from the kernel about the clock
being unprepared when it is still enabled, and then being unprepared when
it has already been unprepared.

Prevent these warnings by removing this unnecessary call to
clk_unprepare().

Fixes: 48cf973cae ("pwm: rockchip: Avoid glitches on already running PWMs")
Signed-off-by: Simon South <simon@simonsouth.net>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-16 10:38:03 +09:00
Aswath Govindraju
605871b841 misc: eeprom_93xx46: Add module alias to avoid breaking support for non device tree users
[ Upstream commit 4540b9fbd8 ]

Module alias "spi:93xx46" is used by non device tree users like
drivers/misc/eeprom/digsy_mtc_eeprom.c  and removing it will
break support for them.

Fix this by adding back the module alias "spi:93xx46".

Fixes: 13613a2246 ("misc: eeprom_93xx46: Fix module alias to enable module autoprobe")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210113051253.15061-1-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-16 10:38:02 +09:00
Aswath Govindraju
31c95736b9 misc: eeprom_93xx46: Fix module alias to enable module autoprobe
[ Upstream commit 13613a2246 ]

Fix module autoprobe by correcting module alias to match the string from
/sys/class/.../spi1.0/modalias content.

Fixes: 06b4501e88 ("misc/eeprom: add driver for microwire 93xx46 EEPROMs")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210107163957.28664-2-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-16 10:38:01 +09:00
Randy Dunlap
28a391dc26 sparc64: only select COMPAT_BINFMT_ELF if BINFMT_ELF is set
[ Upstream commit 80bddf5c93 ]

Currently COMPAT on SPARC64 selects COMPAT_BINFMT_ELF unconditionally,
even when BINFMT_ELF is not enabled. This causes a kconfig warning.

Instead, just select COMPAT_BINFMT_ELF if BINFMT_ELF is enabled.
This builds cleanly with no kconfig warnings.

WARNING: unmet direct dependencies detected for COMPAT_BINFMT_ELF
  Depends on [n]: COMPAT [=y] && BINFMT_ELF [=n]
  Selected by [y]:
  - COMPAT [=y] && SPARC64 [=y]

Fixes: 26b4c91218 ("sparc,sparc64: unify Kconfig files")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-16 10:38:00 +09:00
Dan Carpenter
c082232eca Input: elo - fix an error code in elo_connect()
[ Upstream commit 0958351e93 ]

If elo_setup_10() fails then this should return an error code instead
of success.

Fixes: fae3006e4b ("Input: elo - add support for non-pressure-sensitive touchscreens")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YBKFd5CvDu+jVmfW@mwanda
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-16 10:37:59 +09:00
Namhyung Kim
c454f03188 perf test: Fix unaligned access in sample parsing test
[ Upstream commit c5c97cadd7 ]

The ubsan reported the following error.  It was because sample's raw
data missed u32 padding at the end.  So it broke the alignment of the
array after it.

The raw data contains an u32 size prefix so the data size should have
an u32 padding after 8-byte aligned data.

27: Sample parsing  :util/synthetic-events.c:1539:4:
  runtime error: store to misaligned address 0x62100006b9bc for type
  '__u64' (aka 'unsigned long long'), which requires 8 byte alignment
0x62100006b9bc: note: pointer points here
  00 00 00 00 ff ff ff ff  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
              ^
    #0 0x561532a9fc96 in perf_event__synthesize_sample util/synthetic-events.c:1539:13
    #1 0x5615327f4a4f in do_test tests/sample-parsing.c:284:8
    #2 0x5615327f3f50 in test__sample_parsing tests/sample-parsing.c:381:9
    #3 0x56153279d3a1 in run_test tests/builtin-test.c:424:9
    #4 0x56153279c836 in test_and_print tests/builtin-test.c:454:9
    #5 0x56153279b7eb in __cmd_test tests/builtin-test.c:675:4
    #6 0x56153279abf0 in cmd_test tests/builtin-test.c:821:9
    #7 0x56153264e796 in run_builtin perf.c:312:11
    #8 0x56153264cf03 in handle_internal_command perf.c:364:8
    #9 0x56153264e47d in run_argv perf.c:408:2
    #10 0x56153264c9a9 in main perf.c:538:3
    #11 0x7f137ab6fbbc in __libc_start_main (/lib64/libc.so.6+0x38bbc)
    #12 0x561532596828 in _start ...

SUMMARY: UndefinedBehaviorSanitizer: misaligned-pointer-use
 util/synthetic-events.c:1539:4 in

Fixes: 045f8cd854 ("perf tests: Add a sample parsing test")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210214091638.519643-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-16 10:37:58 +09:00
Adrian Hunter
fcbccfbd6e perf intel-pt: Fix missing CYC processing in PSB
[ Upstream commit 03fb0f859b ]

Add missing CYC packet processing when walking through PSB+. This
improves the accuracy of timestamps that follow PSB+, until the next
MTC.

Fixes: 3d49807870 ("perf tools: Add new Intel PT packet definitions")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210205175350.23817-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-16 10:37:56 +09:00
Andy Shevchenko
91d1e1b5e1 spi: pxa2xx: Fix the controller numbering for Wildcat Point
[ Upstream commit 54c5d3bfb0 ]

Wildcat Point has two SPI controllers and added one is actually second one.
Fix the numbering by adding the description of the first one.

Fixes: caba248db2 ("spi: spi-pxa2xx-pci: Add ID and driver type for WildcatPoint PCH")
Cc: Leif Liddy <leif.liddy@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210208163816.22147-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-16 10:37:55 +09:00