commit c9e9746f275c45108f2b0633a4855d65d9ae0736 upstream.
The driver still uses the sensor resolution provided in the datasheet
until Rev. 1.6, 28-Apr-2022, which was updated with Rev 1.7,
28-Nov-2023. The original ambient light resolution has been updated from
0.0036 lx/ct to 0.0042 lx/ct, which is the value that can be found in
the current device datasheet.
Update the default resolution for IT = 100 ms and GAIN = 1/8 from the
original 4608 mlux/cnt to the current value from the "Resolution and
maximum detection range" table (Application Note 84367, page 5), 5376
mlux/cnt.
Cc: <stable@vger.kernel.org>
Fixes: 7b779f573c ("iio: light: add driver for veml6030 ambient light sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240923-veml6035-v2-1-58c72a0df31c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0ec082f10b7a1fd25e8c1e2a686440da913b7a3 upstream.
Before this patch, if multiple BO_HANDLES chunks were submitted,
the error -EINVAL would be correctly set but could be overwritten
by the return value from amdgpu_cs_p1_bo_handles(). This patch
ensures that if there are multiple BO_HANDLES, we stop.
Fixes: fec5f8e8c6bc ("drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit")
Signed-off-by: Mohammed Anees <pvmohammedanees2003@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 40f2cd98828f454bdc5006ad3d94330a5ea164b7)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28127dba64d8ae1a0b737b973d6d029908599611 upstream.
Include the encoder itself in its possible_clones bitmask.
In the past nothing validated that drivers were populating
possible_clones correctly, but that changed in commit
74d2aacbe8 ("drm: Validate encoder->possible_clones").
Looks like radeon never got the memo and is still not
following the rules 100% correctly.
This results in some warnings during driver initialization:
Bogus possible_clones: [ENCODER:46:TV-46] possible_clones=0x4 (full encoder mask=0x7)
WARNING: CPU: 0 PID: 170 at drivers/gpu/drm/drm_mode_config.c:615 drm_mode_config_validate+0x113/0x39c
...
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Fixes: 74d2aacbe8 ("drm: Validate encoder->possible_clones")
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/20241009000321.418e4294@yea/
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3b6e7d40649c0d75572039aff9d0911864c689db)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28aabffae6be54284869a91cd8bccd3720041129 upstream.
When an application uses SQPOLL, it must wait for the SQPOLL thread to
consume SQE entries, if it fails to get an sqe when calling
io_uring_get_sqe(). It can do so by calling io_uring_enter(2) with the
flag value of IORING_ENTER_SQ_WAIT. In liburing, this is generally done
with io_uring_sqring_wait(). There's a natural expectation that once
this call returns, a new SQE entry can be retrieved, filled out, and
submitted. However, the kernel uses the cached sq head to determine if
the SQRING is full or not. If the SQPOLL thread is currently in the
process of submitting SQE entries, it may have updated the cached sq
head, but not yet committed it to the SQ ring. Hence the kernel may find
that there are SQE entries ready to be consumed, and return successfully
to the application. If the SQPOLL thread hasn't yet committed the SQ
ring entries by the time the application returns to userspace and
attempts to get a new SQE, it will fail getting a new SQE.
Fix this by having io_sqring_full() always use the user visible SQ ring
head entry, rather than the internally cached one.
Cc: stable@vger.kernel.org # 5.10+
Link: https://github.com/axboe/liburing/discussions/1267
Reported-by: Benedek Thaler <thaler@thaler.hu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e972b08b91ef48488bae9789f03cfedb148667fb upstream.
We're seeing crashes from rq_qos_wake_function that look like this:
BUG: unable to handle page fault for address: ffffafe180a40084
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0
Oops: Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40
Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00
RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011
RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084
RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011
R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002
R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
try_to_wake_up+0x5a/0x6a0
rq_qos_wake_function+0x71/0x80
__wake_up_common+0x75/0xa0
__wake_up+0x36/0x60
scale_up.part.0+0x50/0x110
wb_timer_fn+0x227/0x450
...
So rq_qos_wake_function() calls wake_up_process(data->task), which calls
try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock).
p comes from data->task, and data comes from the waitqueue entry, which
is stored on the waiter's stack in rq_qos_wait(). Analyzing the core
dump with drgn, I found that the waiter had already woken up and moved
on to a completely unrelated code path, clobbering what was previously
data->task. Meanwhile, the waker was passing the clobbered garbage in
data->task to wake_up_process(), leading to the crash.
What's happening is that in between rq_qos_wake_function() deleting the
waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding
that it already got a token and returning. The race looks like this:
rq_qos_wait() rq_qos_wake_function()
==============================================================
prepare_to_wait_exclusive()
data->got_token = true;
list_del_init(&curr->entry);
if (data.got_token)
break;
finish_wait(&rqw->wait, &data.wq);
^- returns immediately because
list_empty_careful(&wq_entry->entry)
is true
... return, go do something else ...
wake_up_process(data->task)
(NO LONGER VALID!)-^
Normally, finish_wait() is supposed to synchronize against the waker.
But, as noted above, it is returning immediately because the waitqueue
entry has already been removed from the waitqueue.
The bug is that rq_qos_wake_function() is accessing the waitqueue entry
AFTER deleting it. Note that autoremove_wake_function() wakes the waiter
and THEN deletes the waitqueue entry, which is the proper order.
Fix it by swapping the order. We also need to use
list_del_init_careful() to match the list_empty_careful() in
finish_wait().
Fixes: 38cfb5a45e ("blk-wbt: improve waking of tasks")
Cc: stable@vger.kernel.org
Signed-off-by: Omar Sandoval <osandov@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/d3bee2463a67b1ee597211823bf7ad3721c26e41.1729014591.git.osandov@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c62fa117c32bd1abed9304c58e0da6940f8c7fc2 upstream.
Since X86_FEATURE_ENTRY_IBPB will invalidate all harmful predictions
with IBPB, no software-based untraining of returns is needed anymore.
Currently, this change affects retbleed and SRSO mitigations so if
either of the mitigations is doing IBPB and the other one does the
software sequence, the latter is not needed anymore.
[ bp: Massage commit message. ]
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0fad2878642ec46225af2054564932745ac5c765 upstream.
entry_ibpb() is designed to follow Intel's IBPB specification regardless
of CPU. This includes invalidating RSB entries.
Hence, if IBPB on VMEXIT has been selected, entry_ibpb() as part of the
RET untraining in the VMEXIT path will take care of all BTB and RSB
clearing so there's no need to explicitly fill the RSB anymore.
[ bp: Massage commit message. ]
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50e4b3b94090babe8d4bb85c95f0d3e6b07ea86e upstream.
entry_ibpb() should invalidate all indirect predictions, including return
target predictions. Not all IBPB implementations do this, in which case the
fallback is RSB filling.
Prevent SRSO-style hijacks of return predictions following IBPB, as the return
target predictor can be corrupted before the IBPB completes.
[ bp: Massage. ]
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ea87dfa31a7b0bb0ff1675e67b9e54883013074 upstream.
Set this flag if the CPU has an IBPB implementation that does not
invalidate return target predictions. Zen generations < 4 do not flush
the RSB when executing an IBPB and this bug flag denotes that.
[ bp: Massage. ]
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff898623af2ed564300752bba83a680a1e4fec8d upstream.
AMD's initial implementation of IBPB did not clear the return address
predictor. Beginning with Zen4, AMD's IBPB *does* clear the return address
predictor. This behavior is enumerated by CPUID.80000008H:EBX.IBPB_RET[30].
Define X86_FEATURE_AMD_IBPB_RET for use in KVM_GET_SUPPORTED_CPUID,
when determining cross-vendor capabilities.
Suggested-by: Venkatesh Srinivas <venkateshs@chromium.org>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8061f06185be0a06a73760d6526b8b0feadfe52 upstream.
Previously, access_guest_page() did not check whether the given guest
address is inside of a memslot. This is not a problem, since
kvm_write_guest_page/kvm_read_guest_page return -EFAULT in this case.
However, -EFAULT is also returned when copy_to/from_user fails.
When emulating a guest instruction, the address being outside a memslot
usually means that an addressing exception should be injected into the
guest.
Failure in copy_to/from_user however indicates that something is wrong
in userspace and hence should be handled there.
To be able to distinguish these two cases, return PGM_ADDRESSING in
access_guest_page() when the guest address is outside guest memory. In
access_guest_real(), populate vcpu->arch.pgm.code such that
kvm_s390_inject_prog_cond() can be used in the caller for injecting into
the guest (if applicable).
Since this adds a new return value to access_guest_page(), we need to make
sure that other callers are not confused by the new positive return value.
There are the following users of access_guest_page():
- access_guest_with_key() does the checking itself (in
guest_range_to_gpas()), so this case should never happen. Even if, the
handling is set up properly.
- access_guest_real() just passes the return code to its callers, which
are:
- read_guest_real() - see below
- write_guest_real() - see below
There are the following users of read_guest_real():
- ar_translation() in gaccess.c which already returns PGM_*
- setup_apcb10(), setup_apcb00(), setup_apcb11() in vsie.c which always
return -EFAULT on read_guest_read() nonzero return - no change
- shadow_crycb(), handle_stfle() always present this as validity, this
could be handled better but doesn't change current behaviour - no change
There are the following users of write_guest_real():
- kvm_s390_store_status_unloaded() always returns -EFAULT on
write_guest_real() failure.
Fixes: 2293897805 ("KVM: s390: add architecture compliant guest access functions")
Cc: stable@vger.kernel.org
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240917151904.74314-2-nrb@linux.ibm.com
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d9dc27df22d9b5c8dc7185c8dddbc14f5468518 upstream.
On reboot the SCLP interface is deactivated through a reboot notifier.
This happens before other components using SCLP have the chance to run
their own reboot notifiers.
Two of those components are the SCLP console and tty drivers which try
to flush the last outstanding messages.
At that point the SCLP interface is already unusable and the messages
are discarded.
Execute sclp_deactivate() as late as possible to avoid this issue.
Fixes: 4ae46db99c ("s390/consoles: improve panic notifiers reliability")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://lore.kernel.org/r/20241014-s390-kunit-v1-1-941defa765a6@linutronix.de
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bea07fd63192b61209d48cbb81ef474cc3ee4c62 upstream.
Patch series "maple_tree: correct tree corruption on spanning store", v3.
There has been a nasty yet subtle maple tree corruption bug that appears
to have been in existence since the inception of the algorithm.
This bug seems far more likely to happen since commit f8d112a4e657
("mm/mmap: avoid zeroing vma tree in mmap_region()"), which is the point
at which reports started to be submitted concerning this bug.
We were made definitely aware of the bug thanks to the kind efforts of
Bert Karwatzki who helped enormously in my being able to track this down
and identify the cause of it.
The bug arises when an attempt is made to perform a spanning store across
two leaf nodes, where the right leaf node is the rightmost child of the
shared parent, AND the store completely consumes the right-mode node.
This results in mas_wr_spanning_store() mitakenly duplicating the new and
existing entries at the maximum pivot within the range, and thus maple
tree corruption.
The fix patch corrects this by detecting this scenario and disallowing the
mistaken duplicate copy.
The fix patch commit message goes into great detail as to how this occurs.
This series also includes a test which reliably reproduces the issue, and
asserts that the fix works correctly.
Bert has kindly tested the fix and confirmed it resolved his issues. Also
Mikhail Gavrilov kindly reported what appears to be precisely the same
bug, which this fix should also resolve.
This patch (of 2):
There has been a subtle bug present in the maple tree implementation from
its inception.
This arises from how stores are performed - when a store occurs, it will
overwrite overlapping ranges and adjust the tree as necessary to
accommodate this.
A range may always ultimately span two leaf nodes. In this instance we
walk the two leaf nodes, determine which elements are not overwritten to
the left and to the right of the start and end of the ranges respectively
and then rebalance the tree to contain these entries and the newly
inserted one.
This kind of store is dubbed a 'spanning store' and is implemented by
mas_wr_spanning_store().
In order to reach this stage, mas_store_gfp() invokes
mas_wr_preallocate(), mas_wr_store_type() and mas_wr_walk() in turn to
walk the tree and update the object (mas) to traverse to the location
where the write should be performed, determining its store type.
When a spanning store is required, this function returns false stopping at
the parent node which contains the target range, and mas_wr_store_type()
marks the mas->store_type as wr_spanning_store to denote this fact.
When we go to perform the store in mas_wr_spanning_store(), we first
determine the elements AFTER the END of the range we wish to store (that
is, to the right of the entry to be inserted) - we do this by walking to
the NEXT pivot in the tree (i.e. r_mas.last + 1), starting at the node we
have just determined contains the range over which we intend to write.
We then turn our attention to the entries to the left of the entry we are
inserting, whose state is represented by l_mas, and copy these into a 'big
node', which is a special node which contains enough slots to contain two
leaf node's worth of data.
We then copy the entry we wish to store immediately after this - the copy
and the insertion of the new entry is performed by mas_store_b_node().
After this we copy the elements to the right of the end of the range which
we are inserting, if we have not exceeded the length of the node (i.e.
r_mas.offset <= r_mas.end).
Herein lies the bug - under very specific circumstances, this logic can
break and corrupt the maple tree.
Consider the following tree:
Height
0 Root Node
/ \
pivot = 0xffff / \ pivot = ULONG_MAX
/ \
1 A [-----] ...
/ \
pivot = 0x4fff / \ pivot = 0xffff
/ \
2 (LEAVES) B [-----] [-----] C
^--- Last pivot 0xffff.
Now imagine we wish to store an entry in the range [0x4000, 0xffff] (note
that all ranges expressed in maple tree code are inclusive):
1. mas_store_gfp() descends the tree, finds node A at <=0xffff, then
determines that this is a spanning store across nodes B and C. The mas
state is set such that the current node from which we traverse further
is node A.
2. In mas_wr_spanning_store() we try to find elements to the right of pivot
0xffff by searching for an index of 0x10000:
- mas_wr_walk_index() invokes mas_wr_walk_descend() and
mas_wr_node_walk() in turn.
- mas_wr_node_walk() loops over entries in node A until EITHER it
finds an entry whose pivot equals or exceeds 0x10000 OR it
reaches the final entry.
- Since no entry has a pivot equal to or exceeding 0x10000, pivot
0xffff is selected, leading to node C.
- mas_wr_walk_traverse() resets the mas state to traverse node C. We
loop around and invoke mas_wr_walk_descend() and mas_wr_node_walk()
in turn once again.
- Again, we reach the last entry in node C, which has a pivot of
0xffff.
3. We then copy the elements to the left of 0x4000 in node B to the big
node via mas_store_b_node(), and insert the new [0x4000, 0xffff] entry
too.
4. We determine whether we have any entries to copy from the right of the
end of the range via - and with r_mas set up at the entry at pivot
0xffff, r_mas.offset <= r_mas.end, and then we DUPLICATE the entry at
pivot 0xffff.
5. BUG! The maple tree is corrupted with a duplicate entry.
This requires a very specific set of circumstances - we must be spanning
the last element in a leaf node, which is the last element in the parent
node.
spanning store across two leaf nodes with a range that ends at that shared
pivot.
A potential solution to this problem would simply be to reset the walk
each time we traverse r_mas, however given the rarity of this situation it
seems that would be rather inefficient.
Instead, this patch detects if the right hand node is populated, i.e. has
anything we need to copy.
We do so by only copying elements from the right of the entry being
inserted when the maximum value present exceeds the last, rather than
basing this on offset position.
The patch also updates some comments and eliminates the unused bool return
value in mas_wr_walk_index().
The work performed in commit f8d112a4e657 ("mm/mmap: avoid zeroing vma
tree in mmap_region()") seems to have made the probability of this event
much more likely, which is the point at which reports started to be
submitted concerning this bug.
The motivation for this change arose from Bert Karwatzki's report of
encountering mm instability after the release of kernel v6.12-rc1 which,
after the use of CONFIG_DEBUG_VM_MAPLE_TREE and similar configuration
options, was identified as maple tree corruption.
After Bert very generously provided his time and ability to reproduce this
event consistently, I was able to finally identify that the issue
discussed in this commit message was occurring for him.
Link: https://lkml.kernel.org/r/cover.1728314402.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/48b349a2a0f7c76e18772712d0997a5e12ab0a3b.1728314403.git.lorenzo.stoakes@oracle.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/all/20241001023402.3374-1-spasswolf@web.de/
Tested-by: Bert Karwatzki <spasswolf@web.de>
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Closes: https://lore.kernel.org/all/CABXGCsOPwuoNOqSMmAvWO2Fz4TEmPnjFj-b7iF+XFRu1h7-+Dg@mail.gmail.com/
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d772781964 upstream.
xa_find_after() is designed to handle multi-index entries correctly.
If a xarray has two entries one which spans indexes 0-3 and one at
index 4 xa_find_after(0) will return the entry at index 4.
Having to juggle the two callbacks, however, is unnecessary in case
of the devlink xarray, as there is 1:1 relationship with indexes.
Always use xa_find() and increment the index manually.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[ Ido: Moved the changes from core.c and devl_internal.h to leftover.c ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8861c0933c upstream.
Looks like devlinks_xa_find_get() was intended to get the mark
from the @filter argument. It doesn't actually use @filter, passing
DEVLINK_REGISTERED to xa_find_fn() directly. Walking marks other
than registered is unlikely so drop @filter argument completely.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Ido: Moved the changes from core.c and devl_internal.h to leftover.c ]
Stable-dep-of: d772781964 ("devlink: bump the instance index directly when iterating")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7528c4fb1237512ee18049f852f014eba80bbe8d upstream.
I got a bad pud error and lost a 1GB HugeTLB when calling swapoff. The
problem can be reproduced by the following steps:
1. Allocate an anonymous 1GB HugeTLB and some other anonymous memory.
2. Swapout the above anonymous memory.
3. run swapoff and we will get a bad pud error in kernel message:
mm/pgtable-generic.c:42: bad pud 00000000743d215d(84000001400000e7)
We can tell that pud_clear_bad is called by pud_none_or_clear_bad in
unuse_pud_range() by ftrace. And therefore the HugeTLB pages will never
be freed because we lost it from page table. We can skip HugeTLB pages
for unuse_vma to fix it.
Link: https://lkml.kernel.org/r/20241015014521.570237-1-liushixin2@huawei.com
Fixes: 0fe6e20b9c ("hugetlb, rmap: add reverse mapping for hugepage")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80e9963fb3b5509dfcabe9652d56bf4b35542055 upstream.
As per the GICv4.1 spec (Arm IHI 0069H, 5.3.19):
"A VMAPP with {V, Alloc}=={0, x} is self-synchronizing, This means the ITS
command queue does not show the command as consumed until all of its
effects are completed."
Furthermore, VSYNC is allowed to deliver an SError when referencing a
non existent VPE.
By these definitions, a VMAPP followed by a VSYNC is a bug, as the
later references a VPE that has been unmapped by the former.
Fix it by eliding the VSYNC in this scenario.
Fixes: 64edfaa9a2 ("irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP")
Signed-off-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20240406022737.3898763-1-tangnianyao@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0c3601f2c4e12e7689b0f46ebc17525250ea8c3 upstream.
A boot delay was introduced by commit 79540d133e ("net: macb: Fix
handling of fixed-link node"). This delay was caused by the call to
`mdiobus_register()` in cases where a fixed-link PHY was present. The
MDIO bus registration triggered unnecessary PHY address scans, leading
to a 20-second delay due to attempts to detect Clause 45 (C45)
compatible PHYs, despite no MDIO bus being attached.
The commit 79540d133e ("net: macb: Fix handling of fixed-link node")
was originally introduced to fix a regression caused by commit
7897b071ac ("net: macb: convert to phylink"), which caused the driver
to misinterpret fixed-link nodes as PHY nodes. This resulted in warnings
like:
mdio_bus f0028000.ethernet-ffffffff: fixed-link has invalid PHY address
mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 0
...
mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 31
This patch reworks the logic to avoid registering and allocation of the
MDIO bus when:
- The device tree contains a fixed-link node.
- There is no "mdio" child node in the device tree.
If a child node named "mdio" exists, the MDIO bus will be registered to
support PHYs attached to the MACB's MDIO bus. Otherwise, with only a
fixed-link, the MDIO bus is skipped.
Tested on a sama5d35 based system with a ksz8863 switch attached to
macb0.
Fixes: 79540d133e ("net: macb: Fix handling of fixed-link node")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241013052916.3115142-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50f813e57601c22b6f26ced3193b9b94d70a2640 upstream.
The simulate_ldr_literal() code always loads a 64-bit quantity, and when
simulating a 32-bit load into a 'W' register, it discards the most
significant 32 bits. For big-endian kernels this means that the relevant
bits are discarded, and the value returned is the the subsequent 32 bits
in memory (i.e. the value at addr + 4).
Additionally, simulate_ldr_literal() and simulate_ldrsw_literal() use a
plain C load, which the compiler may tear or elide (e.g. if the target
is the zero register). Today this doesn't happen to matter, but it may
matter in future if trampoline code uses a LDR (literal) or LDRSW
(literal).
Update simulate_ldr_literal() and simulate_ldrsw_literal() to use an
appropriately-sized READ_ONCE() to perform the access, which avoids
these problems.
Fixes: 39a67d49ba ("arm64: kprobes instruction simulation support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit acc450aa07099d071b18174c22a1119c57da8227 upstream.
The simulate_ldr_literal() and simulate_ldrsw_literal() functions are
unsafe to use for uprobes. Both functions were originally written for
use with kprobes, and access memory with plain C accesses. When uprobes
was added, these were reused unmodified even though they cannot safely
access user memory.
There are three key problems:
1) The plain C accesses do not have corresponding extable entries, and
thus if they encounter a fault the kernel will treat these as
unintentional accesses to user memory, resulting in a BUG() which
will kill the kernel thread, and likely lead to further issues (e.g.
lockup or panic()).
2) The plain C accesses are subject to HW PAN and SW PAN, and so when
either is in use, any attempt to simulate an access to user memory
will fault. Thus neither simulate_ldr_literal() nor
simulate_ldrsw_literal() can do anything useful when simulating a
user instruction on any system with HW PAN or SW PAN.
3) The plain C accesses are privileged, as they run in kernel context,
and in practice can access a small range of kernel virtual addresses.
The instructions they simulate have a range of +/-1MiB, and since the
simulated instructions must itself be a user instructions in the
TTBR0 address range, these can address the final 1MiB of the TTBR1
acddress range by wrapping downwards from an address in the first
1MiB of the TTBR0 address range.
In contemporary kernels the last 8MiB of TTBR1 address range is
reserved, and accesses to this will always fault, meaning this is no
worse than (1).
Historically, it was theoretically possible for the linear map or
vmemmap to spill into the final 8MiB of the TTBR1 address range, but
in practice this is extremely unlikely to occur as this would
require either:
* Having enough physical memory to fill the entire linear map all the
way to the final 1MiB of the TTBR1 address range.
* Getting unlucky with KASLR randomization of the linear map such
that the populated region happens to overlap with the last 1MiB of
the TTBR address range.
... and in either case if we were to spill into the final page there
would be larger problems as the final page would alias with error
pointers.
Practically speaking, (1) and (2) are the big issues. Given there have
been no reports of problems since the broken code was introduced, it
appears that no-one is relying on probing these instructions with
uprobes.
Avoid these issues by not allowing uprobes on LDR (literal) and LDRSW
(literal), limiting the use of simulate_ldr_literal() and
simulate_ldrsw_literal() to kprobes. Attempts to place uprobes on LDR
(literal) and LDRSW (literal) will be rejected as
arm_probe_decode_insn() will return INSN_REJECTED. In future we can
consider introducing working uprobes support for these instructions, but
this will require more significant work.
Fixes: 9842ceae9f ("arm64: Add uprobe support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8794ac20a299b647ba9958f6d657051fc51a540 upstream.
As Andrew pointed out, it will make sense that the PTP core
checked timespec64 struct's tv_sec and tv_nsec range before calling
ptp->info->settime64().
As the man manual of clock_settime() said, if tp.tv_sec is negative or
tp.tv_nsec is outside the range [0..999,999,999], it should return EINVAL,
which include dynamic clocks which handles PTP clock, and the condition is
consistent with timespec64_valid(). As Thomas suggested, timespec64_valid()
only check the timespec is valid, but not ensure that the time is
in a valid range, so check it ahead using timespec64_valid_strict()
in pc_clock_settime() and return -EINVAL if not valid.
There are some drivers that use tp->tv_sec and tp->tv_nsec directly to
write registers without validity checks and assume that the higher layer
has checked it, which is dangerous and will benefit from this, such as
hclge_ptp_settime(), igb_ptp_settime_i210(), _rcar_gen4_ptp_settime(),
and some drivers can remove the checks of itself.
Cc: stable@vger.kernel.org
Fixes: 0606f422b4 ("posix clocks: Introduce dynamic clocks")
Acked-by: Richard Cochran <richardcochran@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20241009072302.1754567-2-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d7b2ce43d2c22a21dadaf689cb36a69570346a6 upstream.
Fix the build warnings when CONFIG_FSL_ENETC_MDIO is not enabled.
The detailed warnings are shown as follows.
include/linux/fsl/enetc_mdio.h:62:18: warning: no previous prototype for function 'enetc_hw_alloc' [-Wmissing-prototypes]
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^
include/linux/fsl/enetc_mdio.h:62:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^
| static
8 warnings generated.
Fixes: 6517798dd3 ("enetc: Make MDIO accessors more generic and export to include/linux/fsl")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410102136.jQHZOcS4-lkp@intel.com/
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241011030103.392362-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 412950d5746f7aa139e14fe95338694c1f09b595 upstream.
The xdp_drops statistic indicates the number of XDP frames dropped in
the Rx direction. However, enetc_xdp_drop() is also used in XDP_TX and
XDP_REDIRECT actions. If frame loss occurs in these two actions, the
frames loss count should not be included in xdp_drops, because there
are already xdp_tx_drops and xdp_redirect_failures to count the frame
loss of these two actions, so it's better to remove xdp_drops statistic
from enetc_xdp_drop() and increase xdp_drops in XDP_DROP action.
Fixes: 7ed2bc8007 ("net: enetc: add support for XDP_TX")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241010092056.298128-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f386c802a6 ]
Nobody uses the bh returned from udf_expand_dir_adinicb(). Don't return
it.
Signed-off-by: Jan Kara <jack@suse.cz>
[cascardo: skip backport of 101ee137d3 ("udf: Drop VARCONV support")]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 33e9a53cd9 ]
When there is an error when adding extent to the directory to expand it,
make sure to propagate the error up properly. This is not expected to
happen currently but let's make the code more futureproof.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dbfb102d16 ]
Convert udf_link() to use new directory iteration code for adding entry
into the directory.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f284480340 ]
Implement function udf_fiiter_add_entry() adding new directory entries
using new directory iteration code.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 200918b34d ]
Convert udf_lookup() to use udf_fiiter_find_entry() for looking up
directory entries.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
