commit 17e897a456752ec9c2d7afb3d9baf268b442451b upstream.
With ATA devices supporting the CDL feature, using CDL requires that the
feature be enabled with a SET FEATURES command. This command is issued
as the translated command for the MODE SELECT command issued by
scsi_cdl_enable() when the user enables CDL through the device
cdl_enable sysfs attribute.
Currently, ata_mselect_control_ata_feature() always translates a MODE
SELECT command for the ATA features subpage of the control mode page to
a SET FEATURES command to enable or disable CDL based on the cdl_ctrl
field. However, there is no need to issue the SET FEATURES command if:
1) The MODE SELECT command requests disabling CDL and CDL is already
disabled.
2) The MODE SELECT command requests enabling CDL and CDL is already
enabled.
Fix ata_mselect_control_ata_feature() to issue the SET FEATURES command
only when necessary. Since enabling CDL also implies a reset of the CDL
statistics log page, avoiding useless CDL enable operations also avoids
clearing the CDL statistics log.
Also add debug messages to clearly signal when CDL is being enabled or
disabled using a SET FEATURES command.
Fixes: df60f9c645 ("scsi: ata: libata: Add ATA feature control sub-page translation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 078d3ee7c162cd66d76171579c02d7890bd77daf upstream.
According to CXL r3.2 section 8.2.1.2, the PCI_COMMAND register fields,
including Memory Space Enable bit, have no effect on the behavior of an
RCD Upstream Port. Retaining this check may incorrectly cause
cxl_pci_probe() to fail on a valid RCD upstream Port.
While the specification is explicit only for RCD Upstream Ports, this
check is solely for accessing the RCRB, which is always mapped through
memory space. Therefore, its safe to remove the check entirely. In
practice, firmware reliably enables the Memory Space Enable bit for
RCH Downstream Ports and no failures have been observed.
Removing the check simplifies the code and avoids unnecessary
special-casing, while relying on BIOS/firmware to configure devices
correctly. Moreover, any failures due to inaccessible RCRB regions
will still be caught either in __rcrb_to_component() or while
parsing the component register block.
The following failure was observed in dmesg when the check was present:
cxl_pci 0000:7f:00.0: No component registers (-6)
Fixes: d5b1a27143 ("cxl/acpi: Extract component registers of restricted hosts from RCRB")
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20250407192734.70631-1-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7537deda36521fa8fff9133b39c46e31893606f2 upstream.
Allocate SVM's interrupt remapping metadata using GFP_ATOMIC as
svm_ir_list_add() is called with IRQs are disabled and irqfs.lock held
when kvm_irq_routing_update() reacts to GSI routing changes.
Fixes: 411b44ba80 ("svm: Implements update_pi_irte hook to setup posted interrupt")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit edd43f4d6f50ec3de55a0c9e9df6348d1da51965 upstream.
A previous commit added a 'sync' parameter to io_fallback_tw(), which if
true, means the caller wants to wait on the fallback thread handling it.
But the logic is somewhat messed up, ensure that ctxs are swapped and
flushed appropriately.
Cc: stable@vger.kernel.org
Fixes: dfbe5561ae ("io_uring: flush offloaded and delayed task_work on exit")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c37325cbd91abe3bfab280b3b09947155abe8e07 upstream.
Remove dead code. LoongArch does not have a DMA memory zone (24bit DMA).
The architecture does not even define MAX_DMA_PFN.
Cc: stable@vger.kernel.org
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd51834d1cf65a2c801295d230c220aeebf87a73 upstream.
LoongArch's huge_pte_offset() currently returns a pointer to a PMD slot
even if the underlying entry points to invalid_pte_table (indicating no
mapping). Callers like smaps_hugetlb_range() fetch this invalid entry
value (the address of invalid_pte_table) via this pointer.
The generic is_swap_pte() check then incorrectly identifies this address
as a swap entry on LoongArch, because it satisfies the "!pte_present()
&& !pte_none()" conditions. This misinterpretation, combined with a
coincidental match by is_migration_entry() on the address bits, leads to
kernel crashes in pfn_swap_entry_to_page().
Fix this at the architecture level by modifying huge_pte_offset() to
check the PMD entry's content using pmd_none() before returning. If the
entry is invalid (i.e., it points to invalid_pte_table), return NULL
instead of the pointer to the slot.
Cc: stable@vger.kernel.org
Acked-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3318dc299b072a0511d6dfd8367f3304fb6d9827 upstream.
With ACPI in place, gicv2m_get_fwnode() is registered with the pci
subsystem as pci_msi_get_fwnode_cb(), which may get invoked at runtime
during a PCI host bridge probe. But, the call back is wrongly marked as
__init, causing it to be freed, while being registered with the PCI
subsystem and could trigger:
Unable to handle kernel paging request at virtual address ffff8000816c0400
gicv2m_get_fwnode+0x0/0x58 (P)
pci_set_bus_msi_domain+0x74/0x88
pci_register_host_bridge+0x194/0x548
This is easily reproducible on a Juno board with ACPI boot.
Retain the function for later use.
Fixes: 0644b3daca ("irqchip/gic-v2m: acpi: Introducing GICv2m ACPI support")
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc3628dcd851ddd8d418bf0c897024b4621ddc92 upstream.
The function xdp_convert_buff_to_frame() may return NULL if it fails
to correctly convert the XDP buffer into an XDP frame due to memory
constraints, internal errors, or invalid data. Failing to check for NULL
may lead to a NULL pointer dereference if the result is used later in
processing, potentially causing crashes, data corruption, or undefined
behavior.
On XDP redirect failure, the associated page must be released explicitly
if it was previously retained via get_page(). Failing to do so may result
in a memory leak, as the pages reference count is not decremented.
Cc: stable@vger.kernel.org # v5.9+
Fixes: 6c5aa6fc4d ("xen networking: add basic XDP support for xen-netfront")
Signed-off-by: Alexey Nepomnyashih <sdl@nppct.ru>
Link: https://patch.msgid.link/20250417122118.1009824-1-sdl@nppct.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbd3039a64b01b769040677c4fc68badeca8e3b2 upstream.
As per virtio spec the fields cols and rows are specified as little
endian. Although there is no legacy interface requirement that would
state that cols and rows need to be handled as native endian when legacy
interface is used, unlike for the fields of the adjacent struct
virtio_console_control, I decided to err on the side of caution based
on some non-conclusive virtio spec repo archaeology and opt for using
virtio16_to_cpu() much like for virtio_console_control.event. Strictly
by the letter of the spec virtio_le_to_cpu() would have been sufficient.
But when the legacy interface is not used, it boils down to the same.
And when using the legacy interface, the device formatting these as
little endian when the guest is big endian would surprise me more than
it using guest native byte order (which would make it compatible with
the current implementation). Nevertheless somebody trying to implement
the spec following it to the letter could end up forcing little endian
byte order when the legacy interface is in use. So IMHO this ultimately
needs a judgement call by the maintainers.
Fixes: 8345adbf96 ("virtio: console: Accept console size along with resize control message")
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Cc: stable@vger.kernel.org # v2.6.35+
Message-Id: <20250322002954.3129282-1-pasic@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cc73cc6bcdb5f959670e3ff9abdc62461452ddff ]
Currently, interrupts need to be disabled before single-step mode is
set, it requires that CSR_PRMD_PIE be cleared in save_local_irqflag()
which is called by setup_singlestep(), this is reasonable.
But in the first kprobe breakpoint exception, if the irq is enabled at
the beginning of do_bp(), it will not be disabled at the end of do_bp()
due to the CSR_PRMD_PIE has been cleared in save_local_irqflag(). So for
this case, it may corrupt exception context when restoring the exception
after do_bp() in handle_bp(), this is not reasonable.
In order to restore exception safely in handle_bp(), it needs to ensure
the irq is disabled at the end of do_bp(), so just add a local variable
to record the original interrupt status in the parent context, then use
it as the check condition to enable and disable irq in do_bp().
While at it, do the similar thing for other do_xyz() exception handlers
to make them more robust.
Fixes: 6d4cc40fb5 ("LoongArch: Add kprobes support")
Suggested-by: Jinyang He <hejinyang@loongson.cn>
Suggested-by: Huacai Chen <chenhuacai@loongson.cn>
Co-developed-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb0511d59db9b3e40c8d51f0d151ccd0fd44071d ]
In the current code, the definition of regs_irqs_disabled() is actually
"!(regs->csr_prmd & CSR_CRMD_IE)" because arch_irqs_disabled_flags() is
defined as "!(flags & CSR_CRMD_IE)", it looks a little strange.
Define regs_irqs_disabled() as !(regs->csr_prmd & CSR_PRMD_PIE) directly
to make it more clear, no functional change.
While at it, the return value of regs_irqs_disabled() is true or false,
so change its type to reflect that and also make it always inline.
Fixes: 803b0fc5c3 ("LoongArch: Add process management")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb8e9f59d6f292c3d9fea6c155c22ea5fc3053ab ]
As of commit dce4456619 ("mm/memtest: add ARCH_USE_MEMTEST"),
architectures must select ARCH_USE_MEMTESET to enable CONFIG_MEMTEST.
Commit 628c3bb40e ("LoongArch: Add boot and setup routines") added
support for early_memtest but did not select ARCH_USE_MEMTESET.
Fixes: 628c3bb40e ("LoongArch: Add boot and setup routines")
Tested-by: Erpeng Xu <xuerpeng@uniontech.com>
Tested-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a97fea9db9e9b9c4839d4232dde9f505ff5b4cc ]
Perf doesn't work at perf stat for hardware events on certain x86 platforms:
$perf stat -- sleep 1
Performance counter stats for 'sleep 1':
16.44 msec task-clock # 0.016 CPUs utilized
2 context-switches # 121.691 /sec
0 cpu-migrations # 0.000 /sec
54 page-faults # 3.286 K/sec
<not supported> cycles
<not supported> instructions
<not supported> branches
<not supported> branch-misses
The reason is that the check in x86_pmu_hw_config() for sampling events is
unexpectedly applied to counting events as well.
It should only impact x86 platforms with limit_period used for non-PEBS
events. For Intel platforms, it should only impact some older platforms,
e.g., HSW, BDW and NHM.
Fixes: 88ec7eedbbd2 ("perf/x86: Fix low freqency setting issue")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250423064724.3716211-1-luogengkun@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6f141b332ddd9007756751b6afd24f799488fd8 ]
pipe_clear_nowait has two noinline macros, but we only need one.
I checked the whole tree, and this is the only occurrence:
$ grep -r "noinline .* noinline"
fs/splice.c:static noinline void noinline pipe_clear_nowait(struct file *file)
$
Fixes: 0f99fc513d ("splice: clear FMODE_NOWAIT on file if splice/vmsplice is used")
Signed-off-by: "T.J. Mercier" <tjmercier@google.com>
Link: https://lore.kernel.org/20250423180025.2627670-1-tjmercier@google.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07172206a26dcf3f0bf7c3ecaadd4242b008ea54 ]
Return -EINVAL instead of success if amd_ir_set_vcpu_affinity() is
invoked without use_vapic; lying to KVM about whether or not the IRTE was
configured to post IRQs is all kinds of bad.
Fixes: d98de49a53 ("iommu/amd: Enable vAPIC interrupt remapping mode by default")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f77c3dfffc7063428b100c4945ca2a7a8680380 ]
Make the wait_context a full part of the q_info struct rather
than a stack variable that goes away after pdsc_adminq_post()
is done so that the context is still available after the wait
loop has given up.
There was a case where a slow development firmware caused
the adminq request to time out, but then later the FW finally
finished the request and sent the interrupt. The handler tried
to complete_all() the completion context that had been created
on the stack in pdsc_adminq_post() but no longer existed.
This caused bad pointer usage, kernel crashes, and much wailing
and gnashing of teeth.
Fixes: 01ba61b55b ("pds_core: Add adminq processing and commands")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250421174606.3892-5-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9559d818205a4a0b9cd87181ef46e101ea11157 ]
When the pds_core driver was first created there were some race
conditions around using the adminq, especially for client drivers.
To reduce the possibility of a race condition there's a check
against pf->state in pds_client_adminq_cmd(). This is problematic
for a couple of reasons:
1. The PDSC_S_INITING_DRIVER bit is set during probe, but not
cleared until after everything in probe is complete, which
includes creating the auxiliary devices. For pds_fwctl this
means it can't make any adminq commands until after pds_core's
probe is complete even though the adminq is fully up by the
time pds_fwctl's auxiliary device is created.
2. The race conditions around using the adminq have been fixed
and this path is already protected against client drivers
calling pds_client_adminq_cmd() if the adminq isn't ready,
i.e. see pdsc_adminq_post() -> pdsc_adminq_inc_if_up().
Fix this by removing the pf->state check in pds_client_adminq_cmd()
because invalid accesses to pds_core's adminq is already handled by
pdsc_adminq_post()->pdsc_adminq_inc_if_up().
Fixes: 10659034c6 ("pds_core: add the aux client API")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250421174606.3892-4-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2567daad69cd1107fc0ec29b1615f110d7cf7385 ]
If the FW doesn't support the PDS_CORE_CMD_FW_CONTROL command
the driver might at the least print garbage and at the worst
crash when the user runs the "devlink dev info" devlink command.
This happens because the stack variable fw_list is not 0
initialized which results in fw_list.num_fw_slots being a
garbage value from the stack. Then the driver tries to access
fw_list.fw_names[i] with i >= ARRAY_SIZE and runs off the end
of the array.
Fix this by initializing the fw_list and by not failing
completely if the devcmd fails because other useful information
is printed via devlink dev info even if the devcmd fails.
Fixes: 45d76f4929 ("pds_core: set up device and adminq")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250421174606.3892-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 497041d763016c2e8314d2f6a329a9b77c3797ca ]
MT7531 standalone and MMIO variants found in MT7988 and EN7581 share
most basic properties. Despite that, assisted_learning_on_cpu_port and
mtu_enforcement_ingress were only applied for MT7531 but not for MT7988
or EN7581, causing the expected issues on MMIO devices.
Apply both settings equally also for MT7988 and EN7581 by moving both
assignments form mt7531_setup() to mt7531_setup_common().
This fixes unwanted flooding of packets due to unknown unicast
during DA lookup, as well as issues with heterogenous MTU settings.
Fixes: 7f54cc9772 ("net: dsa: mt7530: split-off common parts from mt7531_setup")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/89ed7ec6d4fa0395ac53ad2809742bb1ce61ed12.1745290867.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3df275ef0a6ae181e8428a6589ef5d5231e58b5c ]
This patch fixes a Use-After-Free vulnerability in the HFSC qdisc class
handling. The issue occurs due to a time-of-check/time-of-use condition
in hfsc_change_class() when working with certain child qdiscs like netem
or codel.
The vulnerability works as follows:
1. hfsc_change_class() checks if a class has packets (q.qlen != 0)
2. It then calls qdisc_peek_len(), which for certain qdiscs (e.g.,
codel, netem) might drop packets and empty the queue
3. The code continues assuming the queue is still non-empty, adding
the class to vttree
4. This breaks HFSC scheduler assumptions that only non-empty classes
are in vttree
5. Later, when the class is destroyed, this can lead to a Use-After-Free
The fix adds a second queue length check after qdisc_peek_len() to verify
the queue wasn't emptied.
Fixes: 21f4d5cc25 ("net_sched/hfsc: fix curve activation in hfsc_change_class()")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Reviewed-by: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20250417184732.943057-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d039eac6e5950f9d1ecc9e410c2fd1feaeab3b6 ]
Normally do_lock_mount(path, _) is locking a mountpoint pinned by
*path and at the time when matching unlock_mount() unlocks that
location it is still pinned by the same thing.
Unfortunately, for 'beneath' case it's no longer that simple -
the object being locked is not the one *path points to. It's the
mountpoint of path->mnt. The thing is, without sufficient locking
->mnt_parent may change under us and none of the locks are held
at that point. The rules are
* mount_lock stabilizes m->mnt_parent for any mount m.
* namespace_sem stabilizes m->mnt_parent, provided that
m is mounted.
* if either of the above holds and refcount of m is positive,
we are guaranteed the same for refcount of m->mnt_parent.
namespace_sem nests inside inode_lock(), so do_lock_mount() has
to take inode_lock() before grabbing namespace_sem. It does
recheck that path->mnt is still mounted in the same place after
getting namespace_sem, and it does take care to pin the dentry.
It is needed, since otherwise we might end up with racing mount --move
(or umount) happening while we were getting locks; in that case
dentry would no longer be a mountpoint and could've been evicted
on memory pressure along with its inode - not something you want
when grabbing lock on that inode.
However, pinning a dentry is not enough - the matching mount is
also pinned only by the fact that path->mnt is mounted on top it
and at that point we are not holding any locks whatsoever, so
the same kind of races could end up with all references to
that mount gone just as we are about to enter inode_lock().
If that happens, we are left with filesystem being shut down while
we are holding a dentry reference on it; results are not pretty.
What we need to do is grab both dentry and mount at the same time;
that makes inode_lock() safe *and* avoids the problem with fs getting
shut down under us. After taking namespace_sem we verify that
path->mnt is still mounted (which stabilizes its ->mnt_parent) and
check that it's still mounted at the same place. From that point
on to the matching namespace_unlock() we are guaranteed that
mount/dentry pair we'd grabbed are also pinned by being the mountpoint
of path->mnt, so we can quietly drop both the dentry reference (as
the current code does) and mnt one - it's OK to do under namespace_sem,
since we are not dropping the final refs.
That solves the problem on do_lock_mount() side; unlock_mount()
also has one, since dentry is guaranteed to stay pinned only until
the namespace_unlock(). That's easy to fix - just have inode_unlock()
done earlier, while it's still pinned by mp->m_dentry.
Fixes: 6ac3928156 "fs: allow to mount beneath top mount" # v6.5+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7f0ee992adf601aa00c252418266177eb7ac2bc ]
A network restart test on a router led to an out-of-memory condition,
which was traced to a memory leak in the PHY LED trigger code.
The root cause is misuse of the devm API. The registration function
(phy_led_triggers_register) is called from phy_attach_direct, not
phy_probe, and the unregister function (phy_led_triggers_unregister)
is called from phy_detach, not phy_remove. This means the register and
unregister functions can be called multiple times for the same PHY
device, but devm-allocated memory is not freed until the driver is
unbound.
This also prevents kmemleak from detecting the leak, as the devm API
internally stores the allocated pointer.
Fix this by replacing devm_kzalloc/devm_kcalloc with standard
kzalloc/kcalloc, and add the corresponding kfree calls in the unregister
path.
Fixes: 3928ee6485 ("net: phy: leds: Add support for "link" trigger")
Fixes: 2e0bc452f4 ("net: phy: leds: add support for led triggers on phy link state change")
Signed-off-by: Hao Guan <hao.guan@siflower.com.cn>
Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250417032557.2929427-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54bebe46871d4e56e05fcf55c1a37e7efa24e0a8 ]
Commands that have not been completed with scsi_done() do not clear the
SCMD_INITIALIZED flag and therefore will not be properly reinitialized.
Thus, the next time the scsi_cmnd structure is used, the command may
fail in scsi_cmd_runtime_exceeded() due to the old jiffies_at_alloc
value:
kernel: sd 16:0:1:84: [sdts] tag#405 timing out command, waited 720s
kernel: sd 16:0:1:84: [sdts] tag#405 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=66636s
Clear flags for commands that have not been completed by SCSI.
Fixes: 4abafdc436 ("block: remove the initialize_rq_fn blk_mq_ops method")
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Link: https://lore.kernel.org/r/20250324084933.15932-2-a.kovaleva@yadro.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc2dbc4983afedd198490cca043798f57c93e9bf ]
[BUG]
When running btrfs/004 with 4K fs block size and 64K page size,
sometimes fsstress workload can take 100% CPU for a while, but not long
enough to trigger a 120s hang warning.
[CAUSE]
When such 100% CPU usage happens, btrfs_punch_hole_lock_range() is
always in the call trace.
One example when this problem happens, the function
btrfs_punch_hole_lock_range() got the following parameters:
lock_start = 4096, lockend = 20469
Then we calculate @page_lockstart by rounding up lock_start to page
boundary, which is 64K (page size is 64K).
For @page_lockend, we round down the value towards page boundary, which
result 0. Then since we need to pass an inclusive end to
filemap_range_has_page(), we subtract 1 from the rounded down value,
resulting in (u64)-1.
In the above case, the range is inside the same page, and we do not even
need to call filemap_range_has_page(), not to mention to call it with
(u64)-1 at the end.
This behavior will cause btrfs_punch_hole_lock_range() to busy loop
waiting for irrelevant range to have its pages dropped.
[FIX]
Calculate @page_lockend by just rounding down @lockend, without
decreasing the value by one. So @page_lockend will no longer overflow.
Then exit early if @page_lockend is no larger than @page_lockstart.
As it means either the range is inside the same page, or the two pages
are adjacent already.
Finally only decrease @page_lockend when calling filemap_range_has_page().
Fixes: 0528476b6a ("btrfs: fix the filemap_range_has_page() call in btrfs_punch_hole_lock_range()")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b8e6b58889c672e1ae3601d9b2b070be4dc2fbc ]
Returning a negative error code in a function with an unsigned
return type is a pretty bad idea. It is probably worse when the
justification for the change is "our static analisys tool found it".
Fixes: cf7de25878a1 ("cppc_cpufreq: Fix possible null pointer dereference")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c324085062919d4e21c69e5e78456dcec0052fe ]
A race can occur between the MCQ completion path and the abort handler:
once a request completes, __blk_mq_free_request() sets rq->mq_hctx to
NULL, meaning the subsequent ufshcd_mcq_req_to_hwq() call in
ufshcd_mcq_abort() can return a NULL pointer. If this NULL pointer is
dereferenced, the kernel will crash.
Add a NULL check for the returned hwq pointer. If hwq is NULL, log an
error and return FAILED, preventing a potential NULL-pointer
dereference. As suggested by Bart, the ufshcd_cmd_inflight() check is
removed.
This is similar to the fix in commit 74736103fb41 ("scsi: ufs: core: Fix
ufshcd_abort_one racing issue").
This is found by our static analysis tool KNighter.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://lore.kernel.org/r/20250410001320.2219341-1-chenyuan0y@gmail.com
Fixes: f1304d4420 ("scsi: ufs: mcq: Added ufshcd_mcq_abort()")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73b24dc731731edf762f9454552cb3a5b7224949 ]
cpufreq_cpu_get_raw() can return NULL when the target CPU is not present
in the policy->cpus mask. scpi_cpufreq_get_rate() does not check for
this case, which results in a NULL pointer dereference.
Fixes: 343a8d17fa ("cpufreq: scpi: remove arm_big_little dependency")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 484d3f15cc6cbaa52541d6259778e715b2c83c54 ]
cpufreq_cpu_get_raw() can return NULL when the target CPU is not present
in the policy->cpus mask. scmi_cpufreq_get_rate() does not check for
this case, which results in a NULL pointer dereference.
Add NULL check after cpufreq_cpu_get_raw() to prevent this issue.
Fixes: 99d6bdf338 ("cpufreq: add support for CPU DVFS based on SCMI message protocol")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9992649f6786921873a9b89dafa5e04d8c5fef2b ]
cpufreq_cpu_get_raw() can return NULL when the target CPU is not present
in the policy->cpus mask. apple_soc_cpufreq_get_rate() does not check
for this case, which results in a NULL pointer dereference.
Fixes: 6286bbb405 ("cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7b98ae5221007d3f202746903d4c21c7caf7ea9 ]
When building with W=1, this variable is unused for configs with
CONFIG_CMA_SIZE_SEL_PERCENTAGE=y:
kernel/dma/contiguous.c:67:26: error: 'size_bytes' defined but not used [-Werror=unused-const-variable=]
Change this to a macro to avoid the warning.
Fixes: c64be2bb1c ("drivers: add Contiguous Memory Allocator")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250409151557.3890443-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f452a2204614fc10e2c3b85904c4bd300c2789dc ]
In ceph, in fill_fscrypt_truncate(), the end flush position is calculated
by:
loff_t lend = orig_pos + CEPH_FSCRYPT_BLOCK_SHIFT - 1;
but that's using the block shift not the block size.
Fix this to use the block size instead.
Fixes: 5c64737d25 ("ceph: add truncate size handling support for fscrypt")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79443a7e9da3c9f68290a8653837e23aba0fa89f ]
The handling of the limits_changed flag in struct sugov_policy needs to
be explicitly synchronized to ensure that cpufreq policy limits updates
will not be missed in some cases.
Without that synchronization it is theoretically possible that
the limits_changed update in sugov_should_update_freq() will be
reordered with respect to the reads of the policy limits in
cpufreq_driver_resolve_freq() and in that case, if the limits_changed
update in sugov_limits() clobbers the one in sugov_should_update_freq(),
the new policy limits may not take effect for a long time.
Likewise, the limits_changed update in sugov_limits() may theoretically
get reordered with respect to the updates of the policy limits in
cpufreq_set_policy() and if sugov_should_update_freq() runs between
them, the policy limits change may be missed.
To ensure that the above situations will not take place, add memory
barriers preventing the reordering in question from taking place and
add READ_ONCE() and WRITE_ONCE() annotations around all of the
limits_changed flag updates to prevent the compiler from messing up
with that code.
Fixes: 600f5badb7 ("cpufreq: schedutil: Don't skip freq update when limits change")
Cc: 5.3+ <stable@vger.kernel.org> # 5.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/3376719.44csPzL39Z@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c0b4bb7f6303c9c4e2e34984c46f5a86478f84d ]
The current method to take into account uclamp hints when estimating the
target frequency can end in a situation where the selected target
frequency is finally higher than uclamp hints, whereas there are no real
needs. Such cases mainly happen because we are currently mixing the
traditional scheduler utilization signal with the uclamp performance
hints. By adding these 2 metrics, we loose an important information when
it comes to select the target frequency, and we have to make some
assumptions which can't fit all cases.
Rework the interface between the scheduler and schedutil governor in order
to propagate all information down to the cpufreq governor.
effective_cpu_util() interface changes and now returns the actual
utilization of the CPU with 2 optional inputs:
- The minimum performance for this CPU; typically the capacity to handle
the deadline task and the interrupt pressure. But also uclamp_min
request when available.
- The maximum targeting performance for this CPU which reflects the
maximum level that we would like to not exceed. By default it will be
the CPU capacity but can be reduced because of some performance hints
set with uclamp. The value can be lower than actual utilization and/or
min performance level.
A new sugov_effective_cpu_perf() interface is also available to compute
the final performance level that is targeted for the CPU, after applying
some cpufreq headroom and taking into account all inputs.
With these 2 functions, schedutil is now able to decide when it must go
above uclamp hints. It now also has a generic way to get the min
performance level.
The dependency between energy model and cpufreq governor and its headroom
policy doesn't exist anymore.
eenv_pd_max_util() asks schedutil for the targeted performance after
applying the impact of the waking task.
[ mingo: Refined the changelog & C comments. ]
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20231122133904.446032-2-vincent.guittot@linaro.org
Stable-dep-of: 79443a7e9da3 ("cpufreq/sched: Explicitly synchronize limits_changed flag handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7bc263840bc3377186cb06b003ac287bb2f18ce2 ]
Remove the rq::cpu_capacity_orig field and use arch_scale_cpu_capacity()
instead.
The scheduler uses 3 methods to get access to a CPU's max compute capacity:
- arch_scale_cpu_capacity(cpu) which is the default way to get a CPU's capacity.
- cpu_capacity_orig field which is periodically updated with
arch_scale_cpu_capacity().
- capacity_orig_of(cpu) which encapsulates rq->cpu_capacity_orig.
There is no real need to save the value returned by arch_scale_cpu_capacity()
in struct rq. arch_scale_cpu_capacity() returns:
- either a per_cpu variable.
- or a const value for systems which have only one capacity.
Remove rq::cpu_capacity_orig and use arch_scale_cpu_capacity() everywhere.
No functional changes.
Some performance tests on Arm64:
- small SMP device (hikey): no noticeable changes
- HMP device (RB5): hackbench shows minor improvement (1-2%)
- large smp (thx2): hackbench and tbench shows minor improvement (1%)
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20231009103621.374412-2-vincent.guittot@linaro.org
Stable-dep-of: 79443a7e9da3 ("cpufreq/sched: Explicitly synchronize limits_changed flag handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a46a0805635d07de50c2ac71588345323c13b2f9 ]
In of_resolve_phandles(), refcount of device node @local_fixups will be
increased if the for_each_child_of_node() exits early, but nowhere to
decrease the refcount, so cause refcount leakage for the node.
Fix by using __free() on @local_fixups.
Fixes: da56d04c80 ("of/resolver: Switch to new local fixups format.")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-9-93e3a2659aa7@quicinc.com
[robh: Use __free() instead]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5275e8b5293f65cc82a5ee5eab02dd573b911d6e ]
Use the __free() cleanup to simplify of_resolve_phandles() and remove
all the goto's.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Stable-dep-of: a46a0805635d ("of: resolver: Fix device node refcount leakage in of_resolve_phandles()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
