In the past, movable allocations could be disallowed from CMA through
PF_MEMALLOC_PIN. As CMA pages are funneled through the MOVABLE pcplist,
this required filtering that cornercase during allocations, such that
pinnable allocations wouldn't accidentally get a CMA page.
However, since 8e3560d963 ("mm: honor PF_MEMALLOC_PIN for all movable
pages"), PF_MEMALLOC_PIN automatically excludes __GFP_MOVABLE. Once
again, MOVABLE implies CMA is allowed.
Remove the stale filtering code. Also remove a stale comment that was
introduced as part of the filtering code, because the filtering let
order-0 pages fall through to the buddy allocator. See 1d91df85f3
("mm/page_alloc: handle a missing case for memalloc_nocma_{save/restore}
APIs") for context. The comment's been obsolete since the introduction of
the explicit ALLOC_HIGHATOMIC flag in eb2e2b425c ("mm/page_alloc:
explicitly record high-order atomic allocations in alloc_flags").
Link: https://lkml.kernel.org/r/20230824153821.243148-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With madvise and prctl KSM can be enabled for different VMA's. Once it is
enabled we can query how effective KSM is overall. However we cannot
easily query if an individual VMA benefits from KSM.
This commit adds a KSM section to the /prod/<pid>/smaps file. It reports
how many of the pages are KSM pages. Note that KSM-placed zeropages are
not included, only actual KSM pages.
Here is a typical output:
7f420a000000-7f421a000000 rw-p 00000000 00:00 0
Size: 262144 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Rss: 51212 kB
Pss: 8276 kB
Shared_Clean: 172 kB
Shared_Dirty: 42996 kB
Private_Clean: 196 kB
Private_Dirty: 7848 kB
Referenced: 15388 kB
Anonymous: 51212 kB
KSM: 41376 kB
LazyFree: 0 kB
AnonHugePages: 0 kB
ShmemPmdMapped: 0 kB
FilePmdMapped: 0 kB
Shared_Hugetlb: 0 kB
Private_Hugetlb: 0 kB
Swap: 202016 kB
SwapPss: 3882 kB
Locked: 0 kB
THPeligible: 0
ProtectionKey: 0
ksm_state: 0
ksm_skip_base: 0
ksm_skip_count: 0
VmFlags: rd wr mr mw me nr mg anon
This information also helps with the following workflow:
- First enable KSM for all the VMA's of a process with prctl.
- Then analyze with the above smaps report which VMA's benefit the most
- Change the application (if possible) to add the corresponding madvise
calls for the VMA's that benefit the most
[shr@devkernel.io: v5]
Link: https://lkml.kernel.org/r/20230823170107.1457915-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20230822180539.1424843-1-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Avoid setting the variables until necessary, and actually use the
variables where applicable. Introducing a variable for the slots array
avoids spanning multiple lines.
Add the missing argument to the documentation.
Use the node type when setting the metadata instead of blindly assuming
the type.
Finally, add a trace point to the function for successful store.
Link: https://lkml.kernel.org/r/20230819004356.1454718-3-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since at least kernel 6.1, flush_dcache_page() is called with IRQs
disabled, e.g. from aio_complete().
But the current implementation for flush_dcache_page() on NIOS2
unintentionally re-enables IRQs, which may lead to deadlocks.
Fix it by using xa_lock_irqsave() and xa_unlock_irqrestore() for the
flush_dcache_mmap_*lock() macros instead.
Link: https://lkml.kernel.org/r/ZOTF5WWURQNH9+iw@p100
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are many files in mm/ that contain kernel-doc which is not
currently published on kernel.org. Some of it is easily categorisable,
but most of it is going into the miscellaneous documentation section to
be organised later.
Some files aren't ready to be included; they contain documentation with
build errors. Or they're nommu.c which duplicates documentation from
"real" MMU systems. Those files are noted with a # mark (although really
anything which isn't a recognised directive would do to prevent inclusion)
Link: https://lkml.kernel.org/r/20230818200630.2719595-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Improve mm documentation".
If you build with W=1, kernel-doc complains about tlb_flush_rmaps(). Then
I ran scripts/find-unused-docs.sh against mm/ and found a large number of
files which weren't included in the ReST documentation. I fixed up a
couple of them, and added all those without erros to the rst files.
There's a lot more work to do to organise all of this, but at least now if
we have documentation that refers to these functions, we'll get a nice
link to them.
This patch (of 4):
The vma parameter wasn't described.
Link: https://lkml.kernel.org/r/20230818200630.2719595-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230818200630.2719595-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove the unnecessary encoding of page order into an enum and pass the
page order directly. That lets us get rid of pe_order().
The switch constructs have to be changed to if/else constructs to prevent
GCC from warning on builds with 3-level page tables where PMD_ORDER and
PUD_ORDER have the same value.
If you are looking at this commit because your driver stopped compiling,
look at the previous commit as well and audit your driver to be sure it
doesn't depend on mmap_lock being held in its ->huge_fault method.
[willy@infradead.org: use "order %u" to match the (non dev_t) style]
Link: https://lkml.kernel.org/r/ZOUYekbtTv+n8hYf@casper.infradead.org
Link: https://lkml.kernel.org/r/20230818202335.2739663-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove the checks for the VMA lock being held, allowing the page fault
path to call into the filesystem instead of retrying with the mmap_lock
held. This will improve scalability for DAX page faults. Also update the
documentation to match (and fix some other changes that have happened
recently).
Link: https://lkml.kernel.org/r/20230818202335.2739663-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Change calling convention for ->huge_fault", v2.
There are two unrelated changes to the calling convention for
->huge_fault. I've bundled them together to help people notice the
change. The first is to improve scalability of DAX page faults by
allowing them to be handled under the VMA lock. The second is to remove
enum page_entry_size since it's really unnecessary. The changelogs and
documentation updates hopefully work to that end.
This patch (of 3):
Allow this to be used in generic code. Also add PUD_ORDER.
Link: https://lkml.kernel.org/r/20230818202335.2739663-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230818202335.2739663-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit 7f3bfab52c ("mm/gup: take mmap_lock in get_dump_page()"),
which landed in v5.10, core dumping doesn't enter fault handling without
holding the mmap_lock anymore. Remove the stale parts of the comments,
but leave the behavior as-is - letting core dumping block on userfault
handling would be a bad idea and could lead to deadlocks if the dumping
process was handling its own userfaults.
Link: https://lkml.kernel.org/r/20230815212216.264445-1-jannh@google.com
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Call set_pte_range() once per contiguous range of the folio instead of
once per page. This batches the updates to mm counters and the rmap.
With a will-it-scale.page_fault3 like app (change file write fault testing
to read fault testing. Trying to upstream it to will-it-scale at [1]) got
15% performance gain on a 48C/96T Cascade Lake test box with 96 processes
running against xfs.
Perf data collected before/after the change:
18.73%--page_add_file_rmap
|
--11.60%--__mod_lruvec_page_state
|
|--7.40%--__mod_memcg_lruvec_state
| |
| --5.58%--cgroup_rstat_updated
|
--2.53%--__mod_lruvec_state
|
--1.48%--__mod_node_page_state
9.93%--page_add_file_rmap_range
|
--2.67%--__mod_lruvec_page_state
|
|--1.95%--__mod_memcg_lruvec_state
| |
| --1.57%--cgroup_rstat_updated
|
--0.61%--__mod_lruvec_state
|
--0.54%--__mod_node_page_state
The running time of __mode_lruvec_page_state() is reduced about 9%.
[1]: https://github.com/antonblanchard/will-it-scale/pull/37
Link: https://lkml.kernel.org/r/20230802151406.3735276-38-willy@infradead.org
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
