Pull char/misc driver fixes from Greg KH:
"Here are some tiny char/misc driver fixes for 5.13-rc4.
Nothing huge here, just some tiny fixes for reported issues:
- two interconnect driver fixes
- kgdb build warning fix for gcc-11
- hgafb regression fix
- soundwire driver fix
- mei driver fix
All have been in linux-next with no reported issues"
* tag 'char-misc-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: request autosuspend after sending rx flow control
kgdb: fix gcc-11 warnings harder
video: hgafb: correctly handle card detect failure during probe
soundwire: qcom: fix handling of qcom,ports-block-pack-mode
interconnect: qcom: Add missing MODULE_DEVICE_TABLE
interconnect: qcom: bcm-voter: add a missing of_node_put()
Pull driver core fixes from Greg KH:
"Here are three small driver core / debugfs fixes for 5.13-rc4:
- debugfs fix for incorrect "lockdown" mode for selinux accesses
- two device link changes, one bugfix and one cleanup
All of these have been in linux-next for over a week with no reported
problems"
* tag 'driver-core-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: base: Reduce device link removal code duplication
drivers: base: Fix device link removal
debugfs: fix security_locked_down() call for SELinux
Pull staging and IIO driver fixes from Greg KH:
"Here are some small IIO and staging driver fixes for reported issues
for 5.13-rc4.
Nothing major here, tiny changes for reported problems, full details
are in the shortlog if people are curious.
All have been in linux-next for a while with no reported problems"
* tag 'staging-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: adc: ad7793: Add missing error code in ad7793_setup()
iio: adc: ad7923: Fix undersized rx buffer.
iio: adc: ad7768-1: Fix too small buffer passed to iio_push_to_buffers_with_timestamp()
iio: dac: ad5770r: Put fwnode in error case during ->probe()
iio: gyro: fxas21002c: balance runtime power in error path
staging: emxx_udc: fix loop in _nbu2ss_nuke()
staging: iio: cdc: ad7746: avoid overwrite of num_channels
iio: adc: ad7192: handle regulator voltage error first
iio: adc: ad7192: Avoid disabling a clock that was never enabled.
iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers
iio: adc: ad7124: Fix missbalanced regulator enable / disable on error.
Pull tty / serial driver fixes from Greg KH:
"Here are some small fixes for reported problems for tty and serial
drivers for 5.13-rc4.
They consist of:
- 8250 bugfixes and new device support
- lockdown security mode fixup
- syzbot found problems fixed
- 8250_omap fix for interrupt storm
- revert of 8250_omap driver fix as it caused worse problem than the
original issue
All but the last patch have been in linux-next for a while, the last
one is a revert of a problem found in linux-next with the 8250_omap
driver change"
* tag 'tty-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"
serial: 8250_pci: handle FL_NOIRQ board flag
serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
serial: 8250_pci: Add support for new HPE serial device
serial: 8250: 8250_omap: Fix possible interrupt storm
serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
serial: 8250_dw: Add device HID for new AMD UART controller
serial: sh-sci: Fix off-by-one error in FIFO threshold register setting
serial: core: fix suspicious security_locked_down() call
serial: tegra: Fix a mask operation that is always true
Pull USB / Thunderbolt fixes from Greg KH:
"Here are a number of tiny USB and Thunderbolt driver fixes for
5.13-rc4.
They consist of:
- thunderbolt fixes for some NVM bound issues
- xhci fixes for reported problems
- control-request fixups
- documentation build warning fixes
- new usb-serial driver device ids
- typec bugfixes for reported issues
- usbfs warning fixups (could be triggered from userspace)
- other tiny fixes for reported problems.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
xhci: Fix 5.12 regression of missing xHC cache clearing command after a Stall
xhci: fix giving back URB with incorrect status regression in 5.12
usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen()
usb: typec: tcpm: Respond Not_Supported if no snk_vdo
usb: typec: tcpm: Properly interrupt VDM AMS
USB: trancevibrator: fix control-request direction
usb: Restore the usb_header label
usb: typec: tcpm: Use LE to CPU conversion when accessing msg->header
usb: typec: ucsi: Clear pending after acking connector change
usb: typec: mux: Fix matching with typec_altmode_desc
misc/uss720: fix memory leak in uss720_probe
usb: dwc3: gadget: Properly track pending and queued SG
USB: usbfs: Don't WARN about excessively large memory allocations
thunderbolt: usb4: Fix NVM read buffer bounds and offset issue
thunderbolt: dma_port: Fix NVM read buffer bounds and offset issue
usb: chipidea: udc: assign interrupt number to USB gadget structure
usb: cdnsp: Fix lack of removing request from pending list.
usb: cdns3: Fix runtime PM imbalance on error
USB: serial: pl2303: add device id for ADLINK ND-6530 GC
USB: serial: ti_usb_3410_5052: add startech.com device id
...
Pull KVM fixes from Paolo Bonzini:
"ARM fixes:
- Another state update on exit to userspace fix
- Prevent the creation of mixed 32/64 VMs
- Fix regression with irqbypass not restarting the guest on failed
connect
- Fix regression with debug register decoding resulting in
overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
x86 fixes:
- fix guest missed wakeup with assigned devices
- fix WARN reported by syzkaller
- do not use BIT() in UAPI headers
- make the kvm_amd.avic parameter bool
PPC fixes:
- make halt polling heuristics consistent with other architectures
selftests:
- various fixes
- new performance selftest memslot_perf_test
- test UFFD minor faults in demand_paging_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
KVM: x86/mmu: Fix comment mentioning skip_4k
KVM: VMX: update vcpu posted-interrupt descriptor when assigning device
KVM: rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK
KVM: x86: add start_assignment hook to kvm_x86_ops
KVM: LAPIC: Narrow the timer latency between wait_lapic_expire and world switch
selftests: kvm: do only 1 memslot_perf_test run by default
KVM: X86: Use _BITUL() macro in UAPI headers
KVM: selftests: add shared hugetlbfs backing source type
KVM: selftests: allow using UFFD minor faults for demand paging
KVM: selftests: create alias mappings when using shared memory
KVM: selftests: add shmem backing source type
KVM: selftests: refactor vm_mem_backing_src_type flags
KVM: selftests: allow different backing source types
KVM: selftests: compute correct demand paging size
KVM: selftests: simplify setup_demand_paging error handling
KVM: selftests: Print a message if /dev/kvm is missing
...
Pull s390 fixes from Vasily Gorbik:
"Fix races in vfio-ccw request handling"
* tag 's390-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
vfio-ccw: Serialize FSM IDLE state with I/O completion
vfio-ccw: Reset FSM state to IDLE inside FSM
vfio-ccw: Check initialized flag in cp_init()
vm_create allocates memory and maps it close to GPA. This memory
is separate from what is allocated in subsequent calls to
vm_userspace_mem_region_add, so it is incorrect to pass the
test memory size to vm_create_default. Just pass a small
fixed amount of memory which can be used later for page table,
otherwise GPAs are already allocated at MEM_GPA and the
test aborts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull SCSI fixes from James Bottomley:
"Ten small fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal
scsi: hisi_sas: Drop free_irq() of devm_request_irq() allocated irq
scsi: vmw_pvscsi: Set correct residual data length
scsi: bnx2fc: Return failure if io_req is already in ABTS processing
scsi: aic7xxx: Remove multiple definition of globals
scsi: aic7xxx: Restore several defines for aic7xxx firmware build
scsi: target: iblock: Fix smp_processor_id() BUG messages
scsi: libsas: Use _safe() loop in sas_resume_port()
scsi: target: tcmu: Fix xarray RCU warning
scsi: target: core: Avoid smp_processor_id() in preemptible code
Pull block fixes from Jens Axboe:
- NVMe pull request (Christoph):
- fix a memory leak in nvme_cdev_add (Guoqing Jiang)
- fix inline data size comparison in nvmet_tcp_queue_response (Hou
Pu)
- fix false keep-alive timeout when a controller is torn down
(Sagi Grimberg)
- fix a nvme-tcp Kconfig dependency (Sagi Grimberg)
- short-circuit reconnect retries for FC (Hannes Reinecke)
- decode host pathing error for connect (Hannes Reinecke)
- MD pull request (Song):
- Fix incorrect chunk boundary assert (Christoph)
- Fix s390/dasd verification panic (Stefan)
* tag 'block-5.13-2021-05-28' of git://git.kernel.dk/linux-block:
nvmet: fix false keep-alive timeout when a controller is torn down
nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response
nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME
md/raid5: remove an incorrect assert in in_chunk_boundary
s390/dasd: add missing discipline function
nvme-fabrics: decode host pathing error for connect
nvme-fc: short-circuit reconnect retries
nvme: fix potential memory leaks in nvme_cdev_add
Pull io_uring fixes from Jens Axboe:
"A few minor fixes:
- Fix an issue with hashed wait removal on exit (Zqiang, Pavel)
- Fix a recent data race introduced in this series (Marco)"
* tag 'io_uring-5.13-2021-05-28' of git://git.kernel.dk/linux-block:
io_uring: fix data race to avoid potential NULL-deref
io-wq: Fix UAF when wakeup wqe in hash waitqueue
io_uring/io-wq: close io-wq full-stop gap
Pull drm fixes from Dave Airlie:
"Pretty quiet this week, couple of amdgpu, one i915, and a few misc otherwise.
ttm:
- prevent irrelevant swapout
amdgpu:
- MultiGPU fan fix
- VCN powergating fixes
amdkfd:
- Fix SDMA register offset error
meson:
- fix shutdown crash
i915:
- Re-enable LTTPR non-transparent LT mode for DPCD_REV < 1.4"
* tag 'drm-fixes-2021-05-29' of git://anongit.freedesktop.org/drm/drm:
drm/ttm: Skip swapout if ttm object is not populated
drm/i915: Reenable LTTPR non-transparent LT mode for DPCD_REV<1.4
drm/meson: fix shutdown crash when component not probed
drm/amdgpu/jpeg3: add cancel_delayed_work_sync before power gate
drm/amdgpu/jpeg2.5: add cancel_delayed_work_sync before power gate
drm/amdgpu/jpeg2.0: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn3: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn2.5: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn2.0: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn1: add cancel_delayed_work_sync before power gate
drm/amdkfd: correct sienna_cichlid SDMA RLC register offset error
drm/amd/pm: correct MGpuFanBoost setting
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix error checking of BPF prog attachment in 'perf stat'.
- Fix getting maximum number of fds in the vendor events JSON parser.
- Move debug initialization earlier, fixing a segfault in some cases.
- Fix eventcode of power10 JSON events.
* tag 'perf-tools-fixes-for-v5.13-2021-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf vendor events powerpc: Fix eventcode of power10 JSON events
perf stat: Fix error check for bpf_program__attach
perf debug: Move debug initialization earlier
perf jevents: Fix getting maximum number of fds
Pull cifs fixes from Steve French:
"Three SMB3 fixes.
Two for stable, and the other fixes a problem pointed out with a
recently added ioctl"
* tag '5.13-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: change format of CIFS_FULL_KEY_DUMP ioctl
cifs: fix string declarations and assignments in tracepoints
cifs: set server->cipher_type to AES-128-CCM for SMB3.0
Pull NFS client bugfixes from Trond Myklebust:
"Stable fixes:
- Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
- Fix Oops in xs_tcp_send_request() when transport is disconnected
- Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()
Bugfixes:
- Fix instances where signal_pending() should be fatal_signal_pending()
- fix an incorrect limit in filelayout_decode_layout()
- Fixes for the SUNRPC backlogged RPC queue
- Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
- Revert commit 586a0787ce ("Clean up rpcrdma_prepare_readch()")"
* tag 'nfs-for-5.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: Remove trailing semicolon in macros
xprtrdma: Revert 586a0787ce
NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
NFS: Clean up reset of the mirror accounting variables
NFS: Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
NFS: Fix an Oopsable condition in __nfs_pageio_add_request()
SUNRPC: More fixes for backlog congestion
SUNRPC: Fix Oops in xs_tcp_send_request() when transport is disconnected
NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()
SUNRPC in case of backlog, hand free slots directly to waiting task
pNFS/NFSv4: Remove redundant initialization of 'rd_size'
NFS: fix an incorrect limit in filelayout_decode_layout()
fs/nfs: Use fatal_signal_pending instead of signal_pending
Pull sound fixes from Takashi Iwai:
"A slightly high volume at this time due to pending ASoC fixes.
While there are a few generic simple-card fixes for regressions, most
of the changes are device-specific fixes: ASoC Intel SOF, codec
clocks, other codec / platform fixes as well as usual HD-audio and
USB-audio"
* tag 'sound-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (37 commits)
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 17 G8
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 15 G8
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP 855 G8
ALSA: hda/realtek: Chain in pop reduction fixup for ThinkStation P340
ALSA: usb-audio: scarlett2: snd_scarlett_gen2_controls_create() can be static
ALSA: hda/realtek: the bass speaker can't output sound on Yoga 9i
ALSA: hda/realtek: Headphone volume is controlled by Front mixer
ALSA: usb-audio: scarlett2: Improve driver startup messages
ALSA: usb-audio: scarlett2: Fix device hang with ehci-pci
ALSA: usb-audio: fix control-request direction
ASoC: qcom: lpass-cpu: Use optional clk APIs
ASoC: cs35l33: fix an error code in probe()
ASoC: SOF: Intel: hda: don't send DAI_CONFIG IPC for older firmware
ASoC: fsl: fix SND_SOC_IMX_RPMSG dependency
ASoC: cs42l52: Minor tidy up of error paths
ASoC: cs35l32: Add missing regmap use_single config
ASoC: cs35l34: Add missing regmap use_single config
ASoC: cs42l73: Add missing regmap use_single config
ASoC: cs53l30: Add missing regmap use_single config
...
Pull clang feature fixes from Kees Cook:
- Correctly pass stack frame size checking under LTO (Nick Desaulniers)
- Avoid CFI mismatches by checking initcall_t types (Marco Elver)
* tag 'clang-features-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Makefile: LTO: have linker check -Wframe-larger-than
init: verify that function is initcall_t at compile-time
Pull MIPS fixes from Thomas Bogendoerfer:
- fix function/preempt trace hangs
- a few build fixes
* tag 'mips-fixes_5.13_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACER
MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c
MIPS: launch.h: add include guard to prevent build errors
MIPS: alchemy: xxs1500: add gpio-au1000.h header file
Reported by syzkaller:
WARNING: CPU: 7 PID: 10526 at linux/arch/x86/kvm//x86.c:7621 x86_emulate_instruction+0x41b/0x510 [kvm]
RIP: 0010:x86_emulate_instruction+0x41b/0x510 [kvm]
Call Trace:
kvm_mmu_page_fault+0x126/0x8f0 [kvm]
vmx_handle_exit+0x11e/0x680 [kvm_intel]
vcpu_enter_guest+0xd95/0x1b40 [kvm]
kvm_arch_vcpu_ioctl_run+0x377/0x6a0 [kvm]
kvm_vcpu_ioctl+0x389/0x630 [kvm]
__x64_sys_ioctl+0x8e/0xd0
do_syscall_64+0x3c/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Commit 4a1e10d5b5 ("KVM: x86: handle hardware breakpoints during emulation())
adds hardware breakpoints check before emulation the instruction and parts of
emulation context initialization, actually we don't have the EMULTYPE_NO_DECODE flag
here and the emulation context will not be reused. Commit c8848cee74 ("KVM: x86:
set ctxt->have_exception in x86_decode_insn()) triggers the warning because it
catches the stale emulation context has #UD, however, it is not during instruction
decoding which should result in EMULATION_FAILED. This patch fixes it by moving
the second part emulation context initialization into init_emulate_ctxt() and
before hardware breakpoints check. The ctxt->ud will be dropped by a follow-up
patch.
syzkaller source: https://syzkaller.appspot.com/x/repro.c?x=134683fdd00000
Reported-by: syzbot+71271244f206d17f6441@syzkaller.appspotmail.com
Fixes: 4a1e10d5b5 (KVM: x86: handle hardware breakpoints during emulation)
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <1622160097-37633-1-git-send-email-wanpengli@tencent.com>
The kvm_get_linear_rip() handles x86/long mode cases well and has
better readability, __kvm_set_rflags() also use the paired
function kvm_is_linear_rip() to check the vcpu->arch.singlestep_rip
set in kvm_arch_vcpu_ioctl_set_guest_debug(), so change the
"CS.BASE + RIP" code in kvm_arch_vcpu_ioctl_set_guest_debug() and
handle_exception_nmi() to this one.
Signed-off-by: Yuan Yao <yuan.yao@intel.com>
Message-Id: <20210526063828.1173-1-yuan.yao@linux.intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull percpu fixes from Dennis Zhou:
"This contains a cleanup to lib/percpu-refcount.c and an update to the
MAINTAINERS file to more formally take over support for lib/percpu*"
* 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
MAINTAINERS: Add lib/percpu* as part of percpu entry
percpu_ref: Don't opencode percpu_ref_is_dying
Pull arm64 fixes from Catalin Marinas:
- Don't use contiguous or block mappings for the linear map when KFENCE
is enabled.
- Fix link in the arch_counter_enforce_ordering() comment.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: don't use CON and BLK mapping if KFENCE is enabled
arm64: Fix stale link in the arch_counter_enforce_ordering() comment
Pull device mapper fixes from Mike Snitzer:
- Fix DM verity target's 'require_signatures' module_param permissions.
- Revert DM snapshot fix from v5.13-rc3 and then properly fix crash
when an origin has no snapshots. This allows only the proper fix to
go to stable@ (since the original fix was successfully dropped).
* tag 'for-5.13/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm snapshot: properly fix a crash when an origin has no snapshots
dm snapshot: revert "fix a crash when an origin has no snapshots"
dm verity: fix require_signatures module_param permissions
We missed using the variable length string macros in several
tracepoints. Fixed them in this change.
There's probably more useful macros that we can use to print
others like flags etc. But I'll submit sepawrate patches for
those at a future date.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: <stable@vger.kernel.org> # v5.12
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB3.0 doesn't have encryption negotiate context but simply uses
the SMB2_GLOBAL_CAP_ENCRYPTION flag.
When that flag is present in the neg response cifs.ko uses AES-128-CCM
which is the only cipher available in this context.
cipher_type was set to the server cipher only when parsing encryption
negotiate context (SMB3.1.1).
For SMB3.0 it was set to 0. This means cipher_type value can be 0 or 1
for AES-128-CCM.
Fix this by checking for SMB3.0 and encryption capability and setting
cipher_type appropriately.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull ACPI fix from Rafael Wysocki:
"Fix a recent ACPI power management regression causing boot issues to
occur on some systems due to attempts to turn off ACPI power resources
that are already off (which should work according to the ACPI
specification)"
* tag 'acpi-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: power: Refine turning off unused power resources
Pull iommu fixes from Joerg Roedel:
- Important fix for the AMD IOMMU driver in the recently added
page-specific invalidation code to fix a calculation.
- Fix a NULL-ptr dereference in the AMD IOMMU driver when a device
switches domain types.
- Fixes for the Intel VT-d driver to check for allocation failure and
do correct cleanup.
- Another fix for Intel VT-d to not allow supervisor page requests from
devices when using second level page translation.
- Add a MODULE_DEVICE_TABLE to the VIRTIO IOMMU driver
* tag 'iommu-fixes-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix sysfs leak in alloc_iommu()
iommu/vt-d: Use user privilege for RID2PASID translation
iommu/vt-d: Check for allocation failure in aux_detach_device()
iommu/virtio: Add missing MODULE_DEVICE_TABLE
iommu/amd: Fix wrong parentheses on page-specific invalidations
iommu/amd: Clear DMA ops when switching domain
Commit ba5ef6dc8a ("io_uring: fortify tctx/io_wq cleanup") introduced
setting tctx->io_wq to NULL a bit earlier. This has caused KCSAN to
detect a data race between accesses to tctx->io_wq:
write to 0xffff88811d8df330 of 8 bytes by task 3709 on cpu 1:
io_uring_clean_tctx fs/io_uring.c:9042 [inline]
__io_uring_cancel fs/io_uring.c:9136
io_uring_files_cancel include/linux/io_uring.h:16 [inline]
do_exit kernel/exit.c:781
do_group_exit kernel/exit.c:923
get_signal kernel/signal.c:2835
arch_do_signal_or_restart arch/x86/kernel/signal.c:789
handle_signal_work kernel/entry/common.c:147 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
...
read to 0xffff88811d8df330 of 8 bytes by task 6412 on cpu 0:
io_uring_try_cancel_iowq fs/io_uring.c:8911 [inline]
io_uring_try_cancel_requests fs/io_uring.c:8933
io_ring_exit_work fs/io_uring.c:8736
process_one_work kernel/workqueue.c:2276
...
With the config used, KCSAN only reports data races with value changes:
this implies that in the case here we also know that tctx->io_wq was
non-NULL. Therefore, depending on interleaving, we may end up with:
[CPU 0] | [CPU 1]
io_uring_try_cancel_iowq() | io_uring_clean_tctx()
if (!tctx->io_wq) // false | ...
... | tctx->io_wq = NULL
io_wq_cancel_cb(tctx->io_wq, ...) | ...
-> NULL-deref |
Note: It is likely that thus far we've gotten lucky and the compiler
optimizes the double-read into a single read into a register -- but this
is never guaranteed, and can easily change with a different config!
Fix the data race by restoring the previous behaviour, where both
setting io_wq to NULL and put of the wq are _serialized_ after
concurrent io_uring_try_cancel_iowq() via acquisition of the uring_lock
and removal of the node in io_uring_del_task_file().
Fixes: ba5ef6dc8a ("io_uring: fortify tctx/io_wq cleanup")
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Reported-by: syzbot+bf2b3d0435b9b728946c@syzkaller.appspotmail.com
Signed-off-by: Marco Elver <elver@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20210527092547.2656514-1-elver@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.13
- fix a memory leak in nvme_cdev_add (Guoqing Jiang)
- fix inline data size comparison in nvmet_tcp_queue_response (Hou Pu)
- fix false keep-alive timeout when a controller is torn down
(Sagi Grimberg)
- fix a nvme-tcp Kconfig dependency (Sagi Grimberg)
- short-circuit reconnect retries for FC (Hannes Reinecke)
- decode host pathing error for connect (Hannes Reinecke)"
* tag 'nvme-5.13-2021-05-27' of git://git.infradead.org/nvme:
nvmet: fix false keep-alive timeout when a controller is torn down
nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response
nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME
nvme-fabrics: decode host pathing error for connect
nvme-fc: short-circuit reconnect retries
nvme: fix potential memory leaks in nvme_cdev_add
Commit 9ed5af268e ("SUNRPC: Clean up the handling of page padding
in rpc_prepare_reply_pages()") [Dec 2020] affects RPC Replies that
have a data payload (i.e., Write chunks).
rpcrdma_prepare_readch(), as its name suggests, sets up Read chunks
which are data payloads within RPC Calls. Those payloads are
constructed by xdr_write_pages(), which continues to stuff the call
buffer's tail kvec with the payload's XDR roundup. Thus removing
the tail buffer logic in rpcrdma_prepare_readch() was the wrong
thing to do.
Fixes: 586a0787ce ("xprtrdma: Clean up rpcrdma_prepare_readch()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Since commit bdcc2cd14e ("NFSv4.2: handle NFS-specific llseek errors"),
nfs42_proc_llseek would return -EOPNOTSUPP rather than -ENOTSUPP when
SEEK_DATA on NFSv4.0/v4.1.
This will lead xfstests generic/285 not run on NFSv4.0/v4.1 when set the
CONFIG_NFS_V4_2, rather than run failed.
Fixes: bdcc2cd14e ("NFSv4.2: handle NFS-specific llseek errors")
Cc: <stable.vger.kernel.org> # 4.2
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
For VMX, when a vcpu enters HLT emulation, pi_post_block will:
1) Add vcpu to per-cpu list of blocked vcpus.
2) Program the posted-interrupt descriptor "notification vector"
to POSTED_INTR_WAKEUP_VECTOR
With interrupt remapping, an interrupt will set the PIR bit for the
vector programmed for the device on the CPU, test-and-set the
ON bit on the posted interrupt descriptor, and if the ON bit is clear
generate an interrupt for the notification vector.
This way, the target CPU wakes upon a device interrupt and wakes up
the target vcpu.
Problem is that pi_post_block only programs the notification vector
if kvm_arch_has_assigned_device() is true. Its possible for the
following to happen:
1) vcpu V HLTs on pcpu P, kvm_arch_has_assigned_device is false,
notification vector is not programmed
2) device is assigned to VM
3) device interrupts vcpu V, sets ON bit
(notification vector not programmed, so pcpu P remains in idle)
4) vcpu 0 IPIs vcpu V (in guest), but since pi descriptor ON bit is set,
kvm_vcpu_kick is skipped
5) vcpu 0 busy spins on vcpu V's response for several seconds, until
RCU watchdog NMIs all vCPUs.
To fix this, use the start_assignment kvm_x86_ops callback to kick
vcpus out of the halt loop, so the notification vector is
properly reprogrammed to the wakeup vector.
Reported-by: Pei Zhang <pezhang@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20210526172014.GA29007@fuller.cnet>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_REQ_UNBLOCK will be used to exit a vcpu from
its inner vcpu halt emulation loop.
Rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK, switch
PowerPC to arch specific request bit.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20210525134321.303768132@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
