This reverts commit 75aa3f255c which is
commit 8c00914e54 upstream.
It breaks the Android api, so revert it for now. If it needs to come
back, it can do so in an abi-safe way.
Bug: 161946584
Change-Id: Ic6c0f3eda15a05d292fa047430a900682505fa64
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Changes in 5.10.186
drm/amd/display: fix the system hang while disable PSR
net/sched: Refactor qdisc_graft() for ingress and clsact Qdiscs
tracing: Add tracing_reset_all_online_cpus_unlocked() function
tick/common: Align tick period during sched_timer setup
selftests: mptcp: lib: skip if missing symbol
selftests: mptcp: lib: skip if not below kernel version
selftests: mptcp: pm nl: remove hardcoded default limits
selftests: mptcp: join: skip check if MIB counter not supported
nilfs2: fix buffer corruption due to concurrent device reads
Drivers: hv: vmbus: Fix vmbus_wait_for_unload() to scan present CPUs
PCI: hv: Fix a race condition bug in hv_pci_query_relations()
Revert "PCI: hv: Fix a timing issue which causes kdump to fail occasionally"
PCI: hv: Remove the useless hv_pcichild_state from struct hv_pci_dev
PCI: hv: Fix a race condition in hv_irq_unmask() that can cause panic
cgroup: Do not corrupt task iteration when rebinding subsystem
mmc: sdhci-msm: Disable broken 64-bit DMA on MSM8916
mmc: meson-gx: remove redundant mmc_request_done() call from irq context
mmc: mmci: stm32: fix max busy timeout calculation
ip_tunnels: allow VXLAN/GENEVE to inherit TOS/TTL from VLAN
regulator: pca9450: Fix LDO3OUT and LDO4OUT MASK
regmap: spi-avmm: Fix regmap_bus max_raw_write
writeback: fix dereferencing NULL mapping->host on writeback_page_template
io_uring/net: save msghdr->msg_control for retries
io_uring/net: clear msg_controllen on partial sendmsg retry
io_uring/net: disable partial retries for recvmsg with cmsg
nilfs2: prevent general protection fault in nilfs_clear_dirty_page()
x86/mm: Avoid using set_pgd() outside of real PGD pages
mm/pagealloc: sysctl: change watermark_scale_factor max limit to 30%
sysctl: move some boundary constants from sysctl.c to sysctl_vals
memfd: check for non-NULL file_seals in memfd_create() syscall
ieee802154: hwsim: Fix possible memory leaks
xfrm: Treat already-verified secpath entries as optional
xfrm: interface: rename xfrm_interface.c to xfrm_interface_core.c
xfrm: Ensure policies always checked on XFRM-I input path
bpf: track immediate values written to stack by BPF_ST instruction
bpf: Fix verifier id tracking of scalars on spill
xfrm: fix inbound ipv4/udp/esp packets to UDPv6 dualstack sockets
selftests: net: vrf-xfrm-tests: change authentication and encryption algos
selftests: net: fcnal-test: check if FIPS mode is enabled
xfrm: Linearize the skb after offloading if needed.
net: qca_spi: Avoid high load if QCA7000 is not available
mmc: mtk-sd: fix deferred probing
mmc: mvsdio: fix deferred probing
mmc: omap: fix deferred probing
mmc: omap_hsmmc: fix deferred probing
mmc: owl: fix deferred probing
mmc: sdhci-acpi: fix deferred probing
mmc: sh_mmcif: fix deferred probing
mmc: usdhi60rol0: fix deferred probing
ipvs: align inner_mac_header for encapsulation
net: dsa: mt7530: fix trapping frames on non-MT7621 SoC MT7530 switch
be2net: Extend xmit workaround to BE3 chip
netfilter: nft_set_pipapo: .walk does not deal with generations
netfilter: nf_tables: disallow element updates of bound anonymous sets
netfilter: nfnetlink_osf: fix module autoload
Revert "net: phy: dp83867: perform soft reset and retain established link"
sch_netem: acquire qdisc lock in netem_change()
gpio: Allow per-parent interrupt data
gpiolib: Fix GPIO chip IRQ initialization restriction
scsi: target: iscsi: Prevent login threads from racing between each other
HID: wacom: Add error check to wacom_parse_and_register()
arm64: Add missing Set/Way CMO encodings
media: cec: core: don't set last_initiator if tx in progress
nfcsim.c: Fix error checking for debugfs_create_dir
usb: gadget: udc: fix NULL dereference in remove()
Input: soc_button_array - add invalid acpi_index DMI quirk handling
s390/cio: unregister device when the only path is gone
spi: lpspi: disable lpspi module irq in DMA mode
ASoC: simple-card: Add missing of_node_put() in case of error
ASoC: nau8824: Add quirk to active-high jack-detect
s390/purgatory: disable branch profiling
ARM: dts: Fix erroneous ADS touchscreen polarities
drm/exynos: vidi: fix a wrong error return
drm/exynos: fix race condition UAF in exynos_g2d_exec_ioctl
drm/radeon: fix race condition UAF in radeon_gem_set_domain_ioctl
x86/apic: Fix kernel panic when booting with intremap=off and x2apic_phys
i2c: imx-lpi2c: fix type char overflow issue when calculating the clock cycle
netfilter: nftables: statify nft_parse_register()
netfilter: nf_tables: validate registers coming from userspace.
netfilter: nf_tables: hold mutex on netns pre_exit path
bpf/btf: Accept function names that contain dots
Linux 5.10.186
Change-Id: I2c45f6bd0cb20e43ac316ed751d2708315db80f0
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This reverts commit bf82668eb9 which is
commit 9bc61c04ff upstream.
It is removing unused code, but that changes a structure size so revert
it for now to preserve the ABI.
Bug: 161946584
Change-Id: I237cda2e5c07440d25613a1a1e30fa499751c7ac
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Changes in 5.10.185
lib: cleanup kstrto*() usage
kernel.h: split out kstrtox() and simple_strtox() to a separate header
test_firmware: Use kstrtobool() instead of strtobool()
test_firmware: prevent race conditions by a correct implementation of locking
test_firmware: fix a memory leak with reqs buffer
power: supply: ab8500: Fix external_power_changed race
power: supply: sc27xx: Fix external_power_changed race
power: supply: bq27xxx: Use mod_delayed_work() instead of cancel() + schedule()
ARM: dts: vexpress: add missing cache properties
tools: gpio: fix debounce_period_us output of lsgpio
power: supply: Ratelimit no data debug output
platform/x86: asus-wmi: Ignore WMI events with codes 0x7B, 0xC0
regulator: Fix error checking for debugfs_create_dir
irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues
power: supply: Fix logic checking if system is running from battery
btrfs: scrub: try harder to mark RAID56 block groups read-only
btrfs: handle memory allocation failure in btrfs_csum_one_bio
ASoC: soc-pcm: test if a BE can be prepared
parisc: Improve cache flushing for PCXL in arch_sync_dma_for_cpu()
parisc: Flush gatt writes and adjust gatt mask in parisc_agp_mask_memory()
MIPS: Alchemy: fix dbdma2
mips: Move initrd_start check after initrd address sanitisation.
ASoC: dwc: move DMA init to snd_soc_dai_driver probe()
xen/blkfront: Only check REQ_FUA for writes
drm:amd:amdgpu: Fix missing buffer object unlock in failure path
irqchip/gic: Correctly validate OF quirk descriptors
io_uring: hold uring mutex around poll removal
epoll: ep_autoremove_wake_function should use list_del_init_careful
ocfs2: fix use-after-free when unmounting read-only filesystem
ocfs2: check new file size on fallocate call
nios2: dts: Fix tse_mac "max-frame-size" property
nilfs2: fix incomplete buffer cleanup in nilfs_btnode_abort_change_key()
nilfs2: fix possible out-of-bounds segment allocation in resize ioctl
kexec: support purgatories with .text.hot sections
x86/purgatory: remove PGO flags
powerpc/purgatory: remove PGO flags
nouveau: fix client work fence deletion race
RDMA/uverbs: Restrict usage of privileged QKEYs
net: usb: qmi_wwan: add support for Compal RXM-G1
ALSA: hda/realtek: Add a quirk for Compaq N14JP6
Remove DECnet support from kernel
USB: serial: option: add Quectel EM061KGL series
serial: lantiq: add missing interrupt ack
usb: dwc3: gadget: Reset num TRBs before giving back the request
RDMA/rtrs: Fix the last iu->buf leak in err path
spi: fsl-dspi: avoid SCK glitches with continuous transfers
netfilter: nfnetlink: skip error delivery on batch in case of ENOMEM
net: enetc: correct the indexes of highest and 2nd highest TCs
ping6: Fix send to link-local addresses with VRF.
net/sched: cls_u32: Fix reference counter leak leading to overflow
RDMA/rxe: Remove the unused variable obj
RDMA/rxe: Removed unused name from rxe_task struct
RDMA/rxe: Fix the use-before-initialization error of resp_pkts
iavf: remove mask from iavf_irq_enable_queues()
octeontx2-af: fixed resource availability check
RDMA/mlx5: Initiate dropless RQ for RAW Ethernet functions
RDMA/cma: Always set static rate to 0 for RoCE
IB/uverbs: Fix to consider event queue closing also upon non-blocking mode
IB/isert: Fix dead lock in ib_isert
IB/isert: Fix possible list corruption in CMA handler
IB/isert: Fix incorrect release of isert connection
ipvlan: fix bound dev checking for IPv6 l3s mode
sctp: fix an error code in sctp_sf_eat_auth()
igb: fix nvm.ops.read() error handling
drm/nouveau: don't detect DSM for non-NVIDIA device
drm/nouveau/dp: check for NULL nv_connector->native_mode
drm/nouveau: add nv_encoder pointer check for NULL
ext4: drop the call to ext4_error() from ext4_get_group_info()
net/sched: cls_api: Fix lockup on flushing explicitly created chain
net: lapbether: only support ethernet devices
net: tipc: resize nlattr array to correct size
selftests/ptp: Fix timestamp printf format for PTP_SYS_OFFSET
afs: Fix vlserver probe RTT handling
cgroup: always put cset in cgroup_css_set_put_fork
rcu/kvfree: Avoid freeing new kfree_rcu() memory after old grace period
neighbour: Remove unused inline function neigh_key_eq16()
net: Remove unused inline function dst_hold_and_use()
net: Remove DECnet leftovers from flow.h.
neighbour: delete neigh_lookup_nodev as not used
batman-adv: Switch to kstrtox.h for kstrtou64
mmc: block: ensure error propagation for non-blk
mm/memory_hotplug: extend offline_and_remove_memory() to handle more than one memory block
nilfs2: reject devices with insufficient block count
media: dvbdev: Fix memleak in dvb_register_device
media: dvbdev: fix error logic at dvb_register_device()
media: dvb-core: Fix use-after-free due to race at dvb_register_device()
drm/i915/dg1: Wait for pcode/uncore handshake at startup
drm/i915/gen11+: Only load DRAM information from pcode
um: Fix build w/o CONFIG_PM_SLEEP
Linux 5.10.185
Change-Id: I05ba9c2e38c013c553c9f89e2a6b71ec9bdb0bd3
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This reverts commit 9fcc3c3d26 which is
commit ed779fe4c9 upstream.
It breaks the Android kernel abi and is not needed for Android systems,
so it is safe to revert.
Bug: 161946584
Change-Id: I0aa37ddcb0939b55d0d1b74ab3e0432b02cc5285
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 9724160b39 ]
When building a kernel with LLVM=1, LLVM_IAS=0 and CONFIG_KASAN=y, LLVM
leaves DWARF tags for the "asan.module_ctor" & co symbols. In turn,
pahole creates BTF_KIND_FUNC entries for these and this makes the BTF
metadata validation fail because they contain a dot.
In a dramatic turn of event, this BTF verification failure can cause
the netfilter_bpf initialization to fail, causing netfilter_core to
free the netfilter_helper hashmap and netfilter_ftp to trigger a
use-after-free. The risk of u-a-f in netfilter will be addressed
separately but the existence of "asan.module_ctor" debug info under some
build conditions sounds like a good enough reason to accept functions
that contain dots in BTF.
Although using only LLVM=1 is the recommended way to compile clang-based
kernels, users can certainly do LLVM=1, LLVM_IAS=0 as well and we still
try to support that combination according to Nick. To clarify:
- > v5.10 kernel, LLVM=1 (LLVM_IAS=0 is not the default) is recommended,
but user can still have LLVM=1, LLVM_IAS=0 to trigger the issue
- <= 5.10 kernel, LLVM=1 (LLVM_IAS=0 is the default) is recommended in
which case GNU as will be used
Fixes: 1dc9285184 ("bpf: kernel side support for BTF Var and DataSec")
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Yonghong Song <yhs@meta.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/bpf/20230615145607.3469985-1-revest@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3923b1e440 upstream.
clean_net() runs in workqueue while walking over the lists, grab mutex.
Fixes: 767d1216bf ("netfilter: nftables: fix possible UAF over chains from packet path in netns")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e1acfa387 upstream.
Bail out in case userspace uses unsupported registers.
Fixes: 49499c3e6e ("netfilter: nf_tables: switch registers to 32 bit addressing")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 85d38d5810 ]
When booting with "intremap=off" and "x2apic_phys" on the kernel command
line, the physical x2APIC driver ends up being used even when x2APIC
mode is disabled ("intremap=off" disables x2APIC mode). This happens
because the first compound condition check in x2apic_phys_probe() is
false due to x2apic_mode == 0 and so the following one returns true
after default_acpi_madt_oem_check() having already selected the physical
x2APIC driver.
This results in the following panic:
kernel BUG at arch/x86/kernel/apic/io_apic.c:2409!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-rc2-ver4.1rc2 #2
Hardware name: Dell Inc. PowerEdge R6515/07PXPY, BIOS 2.3.6 07/06/2021
RIP: 0010:setup_IO_APIC+0x9c/0xaf0
Call Trace:
<TASK>
? native_read_msr
apic_intr_mode_init
x86_late_time_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
secondary_startup_64_no_verify
</TASK>
which is:
setup_IO_APIC:
apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
for_each_ioapic(ioapic)
BUG_ON(mp_irqdomain_create(ioapic));
Return 0 to denote that x2APIC has not been enabled when probing the
physical x2APIC driver.
[ bp: Massage commit message heavily. ]
Fixes: 9ebd680bd0 ("x86, apic: Use probe routines to simplify apic selection")
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230616212236.1389-1-dheerajkumar.srivastava@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 982b173a6c ]
Userspace can race to free the gobj(robj converted from), robj should not
be accessed again after drm_gem_object_put, otherwith it will result in
use-after-free.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48bfd02569 ]
If it is async, runqueue_node is freed in g2d_runqueue_worker on another
worker thread. So in extreme cases, if g2d_runqueue_worker runs first, and
then executes the following if statement, there will be use-after-free.
Signed-off-by: Min Li <lm0963hack@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a05955980 ]
Fix a wrong error return by dropping an error return.
When vidi driver is remvoed, if ctx->raw_edid isn't same as fake_edid_info
then only what we have to is to free ctx->raw_edid so that driver removing
can work correctly - it's not an error case.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03c5c83b70 ]
Avoid linker error for randomly generated config file that
has CONFIG_BRANCH_PROFILE_NONE enabled and make it similar
to riscv, x86 and also to commit 4bf3ec384e ("s390: disable
branch profiling for vdso").
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89c0c62e94 ]
Currently, if the device is offline and all the channel paths are
either configured or varied offline, the associated subchannel gets
unregistered. Don't unregister the subchannel, instead unregister
offline device.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20a99a291d ]
Some devices have a wrong entry in their button array which points to
a GPIO which is required in another driver, so soc_button_array must
not claim it.
A specific example of this is the Lenovo Yoga Book X90F / X90L,
where the PNP0C40 home button entry points to a GPIO which is not
a home button and which is required by the lenovo-yogabook driver.
Add a DMI quirk table which can specify an ACPI GPIO resource index which
should be skipped; and add an entry for the Lenovo Yoga Book X90F / X90L
to this new DMI quirk table.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230414072116.4497-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b9e46aa07 ]
This patch fixes the error checking in nfcsim.c.
The DebugFS kernel API is developed in
a way that the caller can safely ignore the errors that
occur during the creation of DebugFS nodes.
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73af6c7511 ]
When a message was received the last_initiator is set to 0xff.
This will force the signal free time for the next transmit
to that for a new initiator. However, if a new transmit is
already in progress, then don't set last_initiator, since
that's the initiator of the current transmit. Overwriting
this would cause the signal free time of a following transmit
to be that of the new initiator instead of a next transmit.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16a9c24f24 ]
Added a variable check and
transition in case of an error
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a737d3b8c ]
The tpg->np_login_sem is a semaphore that is used to serialize the login
process when multiple login threads run concurrently against the same
target portal group.
The iscsi_target_locate_portal() function finds the tpg, calls
iscsit_access_np() against the np_login_sem semaphore and saves the tpg
pointer in conn->tpg;
If iscsi_target_locate_portal() fails, the caller will check for the
conn->tpg pointer and, if it's not NULL, then it will assume that
iscsi_target_locate_portal() called iscsit_access_np() on the semaphore.
Make sure that conn->tpg gets initialized only if iscsit_access_np() was
successful, otherwise iscsit_deaccess_np() may end up being called against
a semaphore we never took, allowing more than one thread to access the same
tpg.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Link: https://lore.kernel.org/r/20230508162219.1731964-4-mlombard@redhat.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c00914e54 ]
In case of gpio-regmap, IRQ chip is added by regmap-irq and associated with
GPIO chip by gpiochip_irqchip_add_domain(). The initialization flag was not
added in gpiochip_irqchip_add_domain(), causing gpiochip_to_irq() to return
-EPROBE_DEFER.
Fixes: 5467801f1f ("gpio: Restrict usage of GPIO chip irq members before initialization")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfe6807d82 ]
The core gpiolib code is able to deal with multiple interrupt parents
for a single gpio irqchip. It however only allows a single piece
of data to be conveyed to all flow handlers (either the gpio_chip
or some other, driver-specific data).
This means that drivers have to go through some interesting dance
to find the correct context, something that isn't great in interrupt
context (see aebdc8abc9 for a prime
example).
Instead, offer an optional way for a pinctrl/gpio driver to provide
an array of pointers which gets used to provide the correct context
to the flow handler.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211026175815.52703-2-joey.gouly@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Stable-dep-of: 8c00914e54 ("gpiolib: Fix GPIO chip IRQ initialization restriction")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62f9a68a36 ]
Move the alias from xt_osf to nfnetlink_osf.
Fixes: f932495208 ("netfilter: nfnetlink_osf: extract nfnetlink_subsystem code from xt_osf.c")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c88c535b59 ]
Anonymous sets come with NFT_SET_CONSTANT from userspace. Although API
allows to create anonymous sets without NFT_SET_CONSTANT, it makes no
sense to allow to add and to delete elements for bound anonymous sets.
Fixes: 96518518cc ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b84e215f8 ]
The .walk callback iterates over the current active set, but it might be
useful to iterate over the next generation set. Use the generation mask
to determine what set view (either current or next generation) is use
for the walk iteration.
Fixes: 3c4287f620 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7580e0a78e ]
We have seen a bug where the NIC incorrectly changes the length in the
IP header of a padded packet to include the padding bytes. The driver
already has a workaround for this so do the workaround for this NIC too.
This resolves the issue.
The NIC in question identifies itself as follows:
[ 8.828494] be2net 0000:02:00.0: FW version is 10.7.110.31
[ 8.834759] be2net 0000:02:00.0: Emulex OneConnect(be3): PF FLEX10 port 1
02:00.0 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 01)
Fixes: ca34fe38f0 ("be2net: fix wrong usage of adapter->generation")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Link: https://lore.kernel.org/r/20230616164549.2863037-1-ross.lagerwall@citrix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ae90f90e4 ]
All MT7530 switch IP variants share the MT7530_MFC register, but the
current driver only writes it for the switch variant that is integrated in
the MT7621 SoC. Modify the code to include all MT7530 derivatives.
Fixes: b8f126a8d5 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7fce52fdf ]
When using encapsulation the original packet's headers are copied to the
inner headers. This preserves the space for an inner mac header, which
is not used by the inner payloads for the encapsulation types supported
by IPVS. If a packet is using GUE or GRE encapsulation and needs to be
segmented, flow can be passed to __skb_udp_tunnel_segment() which
calculates a negative tunnel header length. A negative tunnel header
length causes pskb_may_pull() to fail, dropping the packet.
This can be observed by attaching probes to ip_vs_in_hook(),
__dev_queue_xmit(), and __skb_udp_tunnel_segment():
perf probe --add '__dev_queue_xmit skb->inner_mac_header \
skb->inner_network_header skb->mac_header skb->network_header'
perf probe --add '__skb_udp_tunnel_segment:7 tnl_hlen'
perf probe -m ip_vs --add 'ip_vs_in_hook skb->inner_mac_header \
skb->inner_network_header skb->mac_header skb->network_header'
These probes the headers and tunnel header length for packets which
traverse the IPVS encapsulation path. A TCP packet can be forced into
the segmentation path by being smaller than a calculated clamped MSS,
but larger than the advertised MSS.
probe:ip_vs_in_hook: inner_mac_header=0x0 inner_network_header=0x0 mac_header=0x44 network_header=0x52
probe:ip_vs_in_hook: inner_mac_header=0x44 inner_network_header=0x52 mac_header=0x44 network_header=0x32
probe:dev_queue_xmit: inner_mac_header=0x44 inner_network_header=0x52 mac_header=0x44 network_header=0x32
probe:__skb_udp_tunnel_segment_L7: tnl_hlen=-2
When using veth-based encapsulation, the interfaces are set to be
mac-less, which does not preserve space for an inner mac header. This
prevents this issue from occurring.
In our real-world testing of sending a 32KB file we observed operation
time increasing from ~75ms for veth-based encapsulation to over 1.5s
using IPVS encapsulation due to retries from dropped packets.
This changeset modifies the packet on the encapsulation path in
ip_vs_tunnel_xmit() and ip_vs_tunnel_xmit_v6() to remove the inner mac
header offset. This fixes UDP segmentation for both encapsulation types,
and corrects the inner headers for any IPIP flows that may use it.
Fixes: 84c0d5e96f ("ipvs: allow tunneling with gue encapsulation")
Signed-off-by: Terin Stock <terin@cloudflare.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92717c2356 ]
In case the QCA7000 is not available via SPI (e.g. in reset),
the driver will cause a high load. The reason for this is
that the synchronization is never finished and schedule()
is never called. Since the synchronization is not timing
critical, it's safe to drop this from the scheduling condition.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 291ab06ecf ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f015b900bc ]
With offloading enabled, esp_xmit() gets invoked very late, from within
validate_xmit_xfrm() which is after validate_xmit_skb() validates and
linearizes the skb if the underlying device does not support fragments.
esp_output_tail() may add a fragment to the skb while adding the auth
tag/ IV. Devices without the proper support will then send skb->data
points to with the correct length so the packet will have garbage at the
end. A pcap sniffer will claim that the proper data has been sent since
it parses the skb properly.
It is not affected with INET_ESP_OFFLOAD disabled.
Linearize the skb after offloading if the sending hardware requires it.
It was tested on v4, v6 has been adopted.
Fixes: 7785bba299 ("esp: Add a software GRO codepath")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7a2fc1437 ]
There are some MD5 tests which fail when the kernel is in FIPS mode,
since MD5 is not FIPS compliant. Add a check and only run those tests
if FIPS mode is not enabled.
Fixes: f0bee1ebb5 ("fcnal-test: Add TCP MD5 tests")
Fixes: 5cad8bce26 ("fcnal-test: Add TCP MD5 tests for VRF")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Magali Lemes <magali.lemes@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb43c60e64 ]
The vrf-xfrm-tests tests use the hmac(md5) and cbc(des3_ede)
algorithms for performing authentication and encryption, respectively.
This causes the tests to fail when fips=1 is set, since these algorithms
are not allowed in FIPS mode. Therefore, switch from hmac(md5) and
cbc(des3_ede) to hmac(sha1) and cbc(aes), which are FIPS compliant.
Fixes: 3f251d7411 ("selftests: Add tests for vrf and xfrms")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Magali Lemes <magali.lemes@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
