commit 0583bc776ca5b5a3f5752869fc31cf7322df2b35 upstream.
dwc2_hc_n_intr() writes back INTMASK as read but evaluates it
with intmask applied. In stress testing this causes spurious
interrupts like this:
[Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 7 - ChHltd set, but reason is unknown
[Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 0 - ChHltd set, but reason is unknown
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length
Applying INTMASK prevents this. The issue exists in all versions of the
driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Tested-by: Ivan Ivanov <ivan.ivanov@suse.com>
Tested-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://lore.kernel.org/r/20231115144514.15248-1-oneukum@suse.com
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58f2fcb3a845fcbbad2f3196bb37d744e0506250 upstream.
The interrupt service routine registered for the gadget is a primary
handler which mask the interrupt source and a threaded handler which
handles the source of the interrupt. Since the threaded handler is
voluntary threaded, the IRQ-core does not disable bottom halves before
invoke the handler like it does for the forced-threaded handler.
Due to changes in networking it became visible that a network gadget's
completions handler may schedule a softirq which remains unprocessed.
The gadget's completion handler is usually invoked either in hard-IRQ or
soft-IRQ context. In this context it is enough to just raise the softirq
because the softirq itself will be handled once that context is left.
In the case of the voluntary threaded handler, there is nothing that
will process pending softirqs. Which means it remain queued until
another random interrupt (on this CPU) fires and handles it on its exit
path or another thread locks and unlocks a lock with the bh suffix.
Worst case is that the CPU goes idle and the NOHZ complains about
unhandled softirqs.
Disable bottom halves before acquiring the lock (and disabling
interrupts) and enable them after dropping the lock. This ensures that
any pending softirqs will handled right away.
cc: stable@vger.kernel.org
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20231108093125.224963-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7cc47e64d3d69786a2711a4767e26b26ba63d7ed upstream.
We found that after long run, the dirty_data of the bcache device
will have errors. This error cannot be eliminated unless re-register.
We also found that reattach after detach, this error can accumulate.
In bch_sectors_dirty_init(), all inode <= d->id keys will be recounted
again. This is wrong, we only need to count the keys of the current
device.
Fixes: b144e45fc5 ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-6-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c7f497ac274a14330208b18f6f734000868ebf9 upstream.
In SHOW(), the variable 'n' is of type 'size_t.' While there is a
conditional check to verify that 'n' is not equal to zero before
executing the 'do_div' macro, concerns arise regarding potential
division by zero error in 64-bit environments.
The concern arises when 'n' is 64 bits in size, greater than zero, and
the lower 32 bits of it are zeros. In such cases, the conditional check
passes because 'n' is non-zero, but the 'do_div' macro casts 'n' to
'uint32_t,' effectively truncating it to its lower 32 bits.
Consequently, the 'n' value becomes zero.
To fix this potential division by zero error and ensure precise
division handling, this commit replaces the 'do_div' macro with
div64_u64(). div64_u64() is designed to work with 64-bit operands,
guaranteeing that division is performed correctly.
This change enhances the robustness of the code, ensuring that division
operations yield accurate results in all scenarios, eliminating the
possibility of division by zero, and improving compatibility across
different 64-bit environments.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-5-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 777967e7e9f6f5f3e153abffb562bffaf4430d26 upstream.
In btree_gc_rewrite_node(), pointer 'n' is not checked after it returns
from btree_gc_rewrite_node(). There is potential possibility that 'n' is
a non NULL ERR_PTR(), referencing such error code is not permitted in
following code. Therefore a return value checking is necessary after 'n'
is back from btree_node_alloc_replacement().
Signed-off-by: Coly Li <colyli@suse.de>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231120052503.6122-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6fc45b6ed921dc00dfb264dc08c7d67ee63d2656 ]
In delay_presuspend, we set the atomic variable may_delay and then stop
the timer and flush pending bios. The intention here is to prevent the
delay target from re-arming the timer again.
However, this test is racy. Suppose that one thread goes to delay_bio,
sees that dc->may_delay is one and proceeds; now, another thread executes
delay_presuspend, it sets dc->may_delay to zero, deletes the timer and
flushes pending bios. Then, the first thread continues and adds the bio to
delayed->list despite the fact that dc->may_delay is false.
Fix this bug by changing may_delay's type from atomic_t to bool and
only access it while holding the delayed_bios_lock mutex. Note that we
don't have to grab the mutex in delay_resume because there are no bios
in flight at this point.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c807d6cd089d2f4951baa838081ec5ae3e2360f8 upstream.
When a VF is being exposed form the kernel, it should be marked as "slave"
before exposing to the user-mode. The VF is not usable without netvsc
running as master. The user-mode should never see a VF without the "slave"
flag.
This commit moves the code of setting the slave flag to the time before
VF is exposed to user-mode.
Cc: stable@vger.kernel.org
Fixes: 0c195567a8 ("netvsc: transparent VF management")
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85520856466ed6bc3b1ccb013cddac70ceb437db upstream.
If VF NIC is registered earlier, NETDEV_REGISTER event is replayed,
but NETDEV_POST_INIT is not.
Move register_netdevice_notifier() earlier, so the call back
function is set before probing.
Cc: stable@vger.kernel.org
Fixes: e04e7a7bbd ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()")
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d30fb712e52964f2cf9a9c14cf67078394044837 upstream.
The rtnl lock also needs to be held before rndis_filter_device_add()
which advertises nvsp_2_vsc_capability / sriov bit, and triggers
VF NIC offering and registering. If VF NIC finished register_netdev()
earlier it may cause name based config failure.
To fix this issue, move the call to rtnl_lock() before
rndis_filter_device_add(), so VF will be registered later than netvsc
/ synthetic NIC, and gets a name numbered (ethX) after netvsc.
Cc: stable@vger.kernel.org
Fixes: e04e7a7bbd ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()")
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db46cd1e0426f52999d50fa72cfa97fa39952885 upstream.
In dasd_profile_start() the amount of requests on the device queue are
counted. The access to the device queue is unprotected against
concurrent access. With a lot of parallel I/O, especially with alias
devices enabled, the device queue can change while dasd_profile_start()
is accessing the queue. In the worst case this leads to a kernel panic
due to incorrect pointer accesses.
Fix this by taking the device lock before accessing the queue and
counting the requests. Additionally the check for a valid profile data
pointer can be done earlier to avoid unnecessary locking in a hot path.
Cc: <stable@vger.kernel.org>
Fixes: 4fa52aa7a8 ("[S390] dasd: add enhanced DASD statistics interface")
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20231025132437.1223363-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2faac25d7958c4761bb8cec54adb79f806783ad6 upstream.
We get a kernel crash about "unable to handle kernel paging request":
```dmesg
[368033.032005] BUG: unable to handle kernel paging request at ffffffffad9ae4b5
[368033.032007] PGD fc3a0d067 P4D fc3a0d067 PUD fc3a0e063 PMD 8000000fc38000e1
[368033.032012] Oops: 0003 [#1] SMP PTI
[368033.032015] CPU: 23 PID: 55090 Comm: bch_dirtcnt[0] Kdump: loaded Tainted: G OE --------- - - 4.18.0-147.5.1.es8_24.x86_64 #1
[368033.032017] Hardware name: Tsinghua Tongfang THTF Chaoqiang Server/072T6D, BIOS 2.4.3 01/17/2017
[368033.032027] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0
[368033.032029] Code: 8b 02 48 85 c0 74 f6 48 89 c1 eb d0 c1 e9 12 83 e0
03 83 e9 01 48 c1 e0 05 48 63 c9 48 05 c0 3d 02 00 48 03 04 cd 60 68 93
ad <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 02
[368033.032031] RSP: 0018:ffffbb48852abe00 EFLAGS: 00010082
[368033.032032] RAX: ffffffffad9ae4b5 RBX: 0000000000000246 RCX: 0000000000003bf3
[368033.032033] RDX: ffff97b0ff8e3dc0 RSI: 0000000000600000 RDI: ffffbb4884743c68
[368033.032034] RBP: 0000000000000001 R08: 0000000000000000 R09: 000007ffffffffff
[368033.032035] R10: ffffbb486bb01000 R11: 0000000000000001 R12: ffffffffc068da70
[368033.032036] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000
[368033.032038] FS: 0000000000000000(0000) GS:ffff97b0ff8c0000(0000) knlGS:0000000000000000
[368033.032039] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[368033.032040] CR2: ffffffffad9ae4b5 CR3: 0000000fc3a0a002 CR4: 00000000003626e0
[368033.032042] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[368033.032043] bcache: bch_cached_dev_attach() Caching rbd479 as bcache462 on set 8cff3c36-4a76-4242-afaa-7630206bc70b
[368033.032045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[368033.032046] Call Trace:
[368033.032054] _raw_spin_lock_irqsave+0x32/0x40
[368033.032061] __wake_up_common_lock+0x63/0xc0
[368033.032073] ? bch_ptr_invalid+0x10/0x10 [bcache]
[368033.033502] bch_dirty_init_thread+0x14c/0x160 [bcache]
[368033.033511] ? read_dirty_submit+0x60/0x60 [bcache]
[368033.033516] kthread+0x112/0x130
[368033.033520] ? kthread_flush_work_fn+0x10/0x10
[368033.034505] ret_from_fork+0x35/0x40
```
The crash occurred when call wake_up(&state->wait), and then we want
to look at the value in the state. However, bch_sectors_dirty_init()
is not found in the stack of any task. Since state is allocated on
the stack, we guess that bch_sectors_dirty_init() has exited, causing
bch_dirty_init_thread() to be unable to handle kernel paging request.
In order to verify this idea, we added some printing information during
wake_up(&state->wait). We find that "wake up" is printed twice, however
we only expect the last thread to wake up once.
```dmesg
[ 994.641004] alcache: bch_dirty_init_thread() wake up
[ 994.641018] alcache: bch_dirty_init_thread() wake up
[ 994.641523] alcache: bch_sectors_dirty_init() init exit
```
There is a race. If bch_sectors_dirty_init() exits after the first wake
up, the second wake up will trigger this bug("unable to handle kernel
paging request").
Proceed as follows:
bch_sectors_dirty_init
kthread_run ==============> bch_dirty_init_thread(bch_dirtcnt[0])
... ...
atomic_inc(&state.started) ...
... ...
atomic_read(&state.enough) ...
... atomic_set(&state->enough, 1)
kthread_run ======================================================> bch_dirty_init_thread(bch_dirtcnt[1])
... atomic_dec_and_test(&state->started) ...
atomic_inc(&state.started) ... ...
... wake_up(&state->wait) ...
atomic_read(&state.enough) atomic_dec_and_test(&state->started)
... ...
wait_event(state.wait, atomic_read(&state.started) == 0) ...
return ...
wake_up(&state->wait)
We believe it is very common to wake up twice if there is no dirty, but
crash is an extremely low probability event. It's hard for us to reproduce
this issue. We attached and detached continuously for a week, with a total
of more than one million attaches and only one crash.
Putting atomic_inc(&state.started) before kthread_run() can avoid waking
up twice.
Fixes: b144e45fc5 ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-8-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45b478951b2ba5aea70b2850c49c1aa83aedd0d2 upstream.
md_end_clone_io() may overwrite error status in orig_bio->bi_status with
BLK_STS_OK. This could happen when orig_bio has BIO_CHAIN (split by
md_submit_bio => bio_split_to_limits, for example). As a result, upper
layer may miss error reported from md (or the device) and consider the
failed IO was successful.
Fix this by only update orig_bio->bi_status when current bio reports
error and orig_bio is BLK_STS_OK. This is the same behavior as
__bio_chain_endio().
Fixes: 10764815ff ("md: add io accounting for raid0 and raid5")
Cc: stable@vger.kernel.org # v5.14+
Reported-by: Bhanu Victor DiCara <00bvd0+linux@gmail.com>
Closes: https://lore.kernel.org/regressions/5727380.DvuYhMxLoT@bvd0/
Signed-off-by: Song Liu <song@kernel.org>
Tested-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f72f4312d4388376fc8a1f6cf37cb21a0d41758b upstream.
Commit 028ddcac47 ("bcache: Remove unnecessary NULL point check in
node allocations") do the following change inside btree_gc_coalesce(),
31 @@ -1340,7 +1340,7 @@ static int btree_gc_coalesce(
32 memset(new_nodes, 0, sizeof(new_nodes));
33 closure_init_stack(&cl);
34
35 - while (nodes < GC_MERGE_NODES && !IS_ERR_OR_NULL(r[nodes].b))
36 + while (nodes < GC_MERGE_NODES && !IS_ERR(r[nodes].b))
37 keys += r[nodes++].keys;
38
39 blocks = btree_default_blocks(b->c) * 2 / 3;
At line 35 the original r[nodes].b is not always allocatored from
__bch_btree_node_alloc(), and possibly initialized as NULL pointer by
caller of btree_gc_coalesce(). Therefore the change at line 36 is not
correct.
This patch replaces the mistaken IS_ERR() by IS_ERR_OR_NULL() to avoid
potential issue.
Fixes: 028ddcac47 ("bcache: Remove unnecessary NULL point check in node allocations")
Cc: <stable@vger.kernel.org> # 6.5+
Cc: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-9-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bff2a2d453a1b683378b4508b86b84389f551a00 upstream.
There's a bug that when using the XEN hypervisor with bios with large
multi-page bio vectors on NVMe, the kernel deadlocks [1].
The deadlocks are caused by inability to map a large bio vector -
dma_map_sgtable always returns an error, this gets propagated to the block
layer as BLK_STS_RESOURCE and the block layer retries the request
indefinitely.
XEN uses the swiotlb framework to map discontiguous pages into contiguous
runs that are submitted to the PCIe device. The swiotlb framework has a
limitation on the length of a mapping - this needs to be announced with
the max_mapping_size method to make sure that the hardware drivers do not
create larger mappings.
Without max_mapping_size, the NVMe block driver would create large
mappings that overrun the maximum mapping size.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Link: https://lore.kernel.org/stable/ZTNH0qtmint%2FzLJZ@mail-itl/ [1]
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/151bef41-e817-aea9-675-a35fdac4ed@redhat.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd911485294a6f0596e4592ed442438015cffc8a upstream.
Like various other ASUS ExpertBook-s, the ASUS ExpertBook B1402CVA
has an ACPI DSDT table that describes IRQ 1 as ActiveLow while
the kernel overrides it to EdgeHigh.
This prevents the keyboard from working. To fix this issue, add this laptop
to the skip_override_table so that the kernel does not override IRQ 1.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218114
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26ca44bdbd upstream.
This commit is taken from Variscite linux kernel public git repository.
Original patch author: Nate Drude <nate.d@variscite.com>
See: https://github.com/varigit/linux-imx/blob/5.15-2.0.x-imx_var01/drivers/net/ethernet/freescale/fec_main.c#L3993-L4050
The ethernet phy reset was moved from the fec controller to the
mdio bus, see for example: 0e825b32c0
When the fec driver managed the reset, the regulator had time to
settle during the fec phy reset before calling of_mdiobus_register,
which probes the mii bus for the phy id to match the correct driver.
Now that the mdio bus controls the reset, the fec driver no longer has
any delay between enabling the regulator and calling of_mdiobus_register.
If the regulator voltage has not settled, the phy id will not be read
correctly and the generic phy driver will be used.
The following call tree explains in more detail:
fec_probe
fec_reset_phy <- no longer introduces delay after migration to mdio reset
fec_enet_mii_init
of_mdiobus_register
of_mdiobus_register_phy
fwnode_mdiobus_register_phy
get_phy_device <- mii probe for phy id to match driver happens here
...
fwnode_mdiobus_phy_device_register
phy_device_register
mdiobus_register_device
mdio_device_reset <- mdio reset assert / deassert delay happens here
Add a 20ms enable delay to the regulator to fix the issue.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bf51c52a1f3c238d72c64e14d5e7702d3a245b82 ]
nfsd_cache_csum() currently assumes that the server's RPC layer has
been advancing rq_arg.head[0].iov_base as it decodes an incoming
request, because that's the way it used to work. On entry, it
expects that buf->head[0].iov_base points to the start of the NFS
header, and excludes the already-decoded RPC header.
These days however, head[0].iov_base now points to the start of the
RPC header during all processing. It no longer points at the NFS
Call header when execution arrives at nfsd_cache_csum().
In a retransmitted RPC the XID and the NFS header are supposed to
be the same as the original message, but the contents of the
retransmitted RPC header can be different. For example, for krb5,
the GSS sequence number will be different between the two. Thus if
the RPC header is always included in the DRC checksum computation,
the checksum of the retransmitted message might not match the
checksum of the original message, even though the NFS part of these
messages is identical.
The result is that, even if a matching XID is found in the DRC,
the checksum mismatch causes the server to execute the
retransmitted RPC transaction again.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1caf5f61dd8430ae5a0b4538afe4953ce7517cbb ]
The "statp + 1" pointer that is passed to nfsd_cache_update() is
supposed to point to the start of the egress NFS Reply header. In
fact, it does point there for AUTH_SYS and RPCSEC_GSS_KRB5 requests.
But both krb5i and krb5p add fields between the RPC header's
accept_stat field and the start of the NFS Reply header. In those
cases, "statp + 1" points at the extra fields instead of the Reply.
The result is that nfsd_cache_update() caches what looks to the
client like garbage.
A connection break can occur for a number of reasons, but the most
common reason when using krb5i/p is a GSS sequence number window
underrun. When an underrun is detected, the server is obliged to
drop the RPC and the connection to force a retransmit with a fresh
GSS sequence number. The client presents the same XID, it hits in
the server's DRC, and the server returns the garbage cache entry.
The "statp + 1" argument has been used since the oldest changeset
in the kernel history repo, so it has been in nfsd_dispatch()
literally since before history began. The problem arose only when
the server-side GSS implementation was added twenty years ago.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8e387c89e96b9543a339f84043cf9df15fed2632 ]
__insert_pending() allocate memory in atomic context, so the allocation
could fail, but we are not handling that failure now. It could lead
ext4_es_remove_extent() to get wrong reserved clusters, and the global
data blocks reservation count will be incorrect. The same to
extents_status entry preallocation, preallocate pending entry out of the
i_es_lock with __GFP_NOFAIL, make sure __insert_pending() and
__revise_pending() always succeeds.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230824092619.1327976-3-yi.zhang@huaweicloud.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 768d612f79 ]
Yikebaer reported an issue:
==================================================================
BUG: KASAN: slab-use-after-free in ext4_es_insert_extent+0xc68/0xcb0
fs/ext4/extents_status.c:894
Read of size 4 at addr ffff888112ecc1a4 by task syz-executor/8438
CPU: 1 PID: 8438 Comm: syz-executor Not tainted 6.5.0-rc5 #1
Call Trace:
[...]
kasan_report+0xba/0xf0 mm/kasan/report.c:588
ext4_es_insert_extent+0xc68/0xcb0 fs/ext4/extents_status.c:894
ext4_map_blocks+0x92a/0x16f0 fs/ext4/inode.c:680
ext4_alloc_file_blocks.isra.0+0x2df/0xb70 fs/ext4/extents.c:4462
ext4_zero_range fs/ext4/extents.c:4622 [inline]
ext4_fallocate+0x251c/0x3ce0 fs/ext4/extents.c:4721
[...]
Allocated by task 8438:
[...]
kmem_cache_zalloc include/linux/slab.h:693 [inline]
__es_alloc_extent fs/ext4/extents_status.c:469 [inline]
ext4_es_insert_extent+0x672/0xcb0 fs/ext4/extents_status.c:873
ext4_map_blocks+0x92a/0x16f0 fs/ext4/inode.c:680
ext4_alloc_file_blocks.isra.0+0x2df/0xb70 fs/ext4/extents.c:4462
ext4_zero_range fs/ext4/extents.c:4622 [inline]
ext4_fallocate+0x251c/0x3ce0 fs/ext4/extents.c:4721
[...]
Freed by task 8438:
[...]
kmem_cache_free+0xec/0x490 mm/slub.c:3823
ext4_es_try_to_merge_right fs/ext4/extents_status.c:593 [inline]
__es_insert_extent+0x9f4/0x1440 fs/ext4/extents_status.c:802
ext4_es_insert_extent+0x2ca/0xcb0 fs/ext4/extents_status.c:882
ext4_map_blocks+0x92a/0x16f0 fs/ext4/inode.c:680
ext4_alloc_file_blocks.isra.0+0x2df/0xb70 fs/ext4/extents.c:4462
ext4_zero_range fs/ext4/extents.c:4622 [inline]
ext4_fallocate+0x251c/0x3ce0 fs/ext4/extents.c:4721
[...]
==================================================================
The flow of issue triggering is as follows:
1. remove es
raw es es removed es1
|-------------------| -> |----|.......|------|
2. insert es
es insert es1 merge with es es1 merge with es and free es1
|----|.......|------| -> |------------|------| -> |-------------------|
es merges with newes, then merges with es1, frees es1, then determines
if es1->es_len is 0 and triggers a UAF.
The code flow is as follows:
ext4_es_insert_extent
es1 = __es_alloc_extent(true);
es2 = __es_alloc_extent(true);
__es_remove_extent(inode, lblk, end, NULL, es1)
__es_insert_extent(inode, &newes, es1) ---> insert es1 to es tree
__es_insert_extent(inode, &newes, es2)
ext4_es_try_to_merge_right
ext4_es_free_extent(inode, es1) ---> es1 is freed
if (es1 && !es1->es_len)
// Trigger UAF by determining if es1 is used.
We determine whether es1 or es2 is used immediately after calling
__es_remove_extent() or __es_insert_extent() to avoid triggering a
UAF if es1 or es2 is freed.
Reported-by: Yikebaer Aizezi <yikebaer61@gmail.com>
Closes: https://lore.kernel.org/lkml/CALcu4raD4h9coiyEBL4Bm0zjDwxC2CyPiTwsP3zFuhot6y9Beg@mail.gmail.com
Fixes: 2a69c45008 ("ext4: using nofail preallocation in ext4_es_insert_extent()")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230815070808.3377171-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 8e387c89e96b ("ext4: make sure allocate pending entry not fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a69c45008 ]
Similar to in ext4_es_insert_delayed_block(), we use preallocations that
do not fail to avoid inconsistencies, but we do not care about es that are
not must be kept, and we return 0 even if such es memory allocation fails.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-9-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 8e387c89e96b ("ext4: make sure allocate pending entry not fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9fe2b882b ]
If __es_remove_extent() returns an error it means that when splitting
extent, allocating an extent that must be kept failed, where returning
an error directly would cause the extent tree to be inconsistent. So we
use GFP_NOFAIL to pre-allocate an extent_status and pass it to
__es_remove_extent() to avoid this problem.
In addition, since the allocated memory is outside the i_es_lock, the
extent_status tree may change and the pre-allocated extent_status is
no longer needed, so we release the pre-allocated extent_status when
es->es_len is not initialized.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-7-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 8e387c89e96b ("ext4: make sure allocate pending entry not fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bda3efaf77 ]
When splitting extent, if the second extent can not be dropped, we return
-ENOMEM and use GFP_NOFAIL to preallocate an extent_status outside of
i_es_lock and pass it to __es_remove_extent() to be used as the second
extent. This ensures that __es_remove_extent() is executed successfully,
thus ensuring consistency in the extent status tree. If the second extent
is not undroppable, we simply drop it and return 0. Then retry is no longer
necessary, remove it.
Now, __es_remove_extent() will always remove what it should, maybe more.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-6-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 8e387c89e96b ("ext4: make sure allocate pending entry not fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73a2f03365 ]
Factor out __es_alloc_extent() and __es_free_extent(), which only allocate
and free extent_status in these two helpers.
The ext4_es_alloc_extent() function is split into __es_alloc_extent()
and ext4_es_init_extent(). In __es_alloc_extent() we allocate memory using
GFP_KERNEL | __GFP_NOFAIL | __GFP_ZERO if the memory allocation cannot
fail, otherwise we use GFP_ATOMIC. and the ext4_es_init_extent() is used to
initialize extent_status and update related variables after a successful
allocation.
This is to prepare for the use of pre-allocated extent_status later.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 8e387c89e96b ("ext4: make sure allocate pending entry not fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9649eb18c6 ]
In the extent status tree, we have extents which we can just drop without
issues and extents we must not drop - this depends on the extent's status
- currently ext4_es_is_delayed() extents must stay, others may be dropped.
A helper function is added to help determine if the current extent can
be dropped, although only ext4_es_is_delayed() extents cannot be dropped
currently.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 8e387c89e96b ("ext4: make sure allocate pending entry not fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f69791c39745e64621216fe8919cb73c0065002b ]
Right now we never release the power-domains properly on the error path.
Add a routine to be reused for this purpose and appropriate jumps in
probe() to run that routine where necessary.
Fixes: 2f6f8af672 ("media: camss: Refactor VFE power domain toggling")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b278080a89f452063915beda0ade6b3ed5ee4271 ]
Previously the jump label err_cleanup was used higher in the probe()
function to release the async notifier however the async notifier
registration was moved later in the code rendering the previous four jumps
redundant.
Rename the label from err_cleanup to err_v4l2_device_unregister to capture
what the jump does.
Fixes: 51397a4ec75d ("media: qcom: Initialise V4L2 async notifier later")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fix old name in commit log: err_v4l2_device_register -> err_v4l2_device_unregister]
Stable-dep-of: f69791c39745 ("media: qcom: camss: Fix genpd cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5651bab689 ]
Initialise V4L2 async notifier and parse DT for async sub-devices later,
just before registering the notifier. This way the device can be made
available to the V4L2 async framework from the notifier init time onwards.
A subsequent patch will add struct v4l2_device as an argument to
v4l2_async_nf_init().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: f69791c39745 ("media: qcom: camss: Fix genpd cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 428bbf4be4 ]
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: f69791c39745 ("media: qcom: camss: Fix genpd cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46cc031754 ]
There are three cases of power domain management on supported platforms:
1) CAMSS on MSM8916, where a single VFE power domain is operated outside
of the camss device driver,
2) CAMSS on MSM8996 and SDM630/SDM660, where two VFE power domains are
managed separately by the camss device driver, the power domains are
linked and unlinked on demand by their functions vfe_pm_domain_on()
and vfe_pm_domain_off() respectively,
3) CAMSS on SDM845 and SM8250 platforms, and there are two VFE power
domains and their parent power domain TITAN_TOP, the latter one
shall be turned on prior to turning on any of VFE power domains.
Due to a previously missing link between TITAN_TOP and VFEx power domains
in the latter case, which is now fixed by [1], it was decided always to
turn on all found VFE power domains and TITAN_TOP power domain, even if
just one particular VFE is needed to be enabled or none of VFE power
domains are required, for instance the latter case is when vfe_lite is in
use. This misusage becomes more incovenient and clumsy, if next generations
are to be supported, for instance CAMSS on SM8450 has three VFE power
domains.
The change splits the power management support for platforms with TITAN_TOP
parent power domain, and, since 'power-domain-names' property is not
present in camss device tree nodes, the assumption is that the first
N power domains from the 'power-domains' list correspond to VFE power
domains, and, if the number of power domains is greater than number of
non-lite VFEs, then the last power domain from the list is the TITAN_TOP
power domain.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: f69791c39745 ("media: qcom: camss: Fix genpd cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83767a67e7b6a0291cde5681ec7e3708f3f8f877 ]
After commit 411740f542 ("KVM: MIPS/MMU: Implement KVM_CAP_SYNC_MMU")
old_pte is no longer used in kvm_mips_map_page(). So remove it to fix a
build warning about variable set but not used:
arch/mips/kvm/mmu.c: In function 'kvm_mips_map_page':
>> arch/mips/kvm/mmu.c:701:29: warning: variable 'old_pte' set but not used [-Wunused-but-set-variable]
701 | pte_t *ptep, entry, old_pte;
| ^~~~~~~
Cc: stable@vger.kernel.org
Fixes: 411740f542 ("KVM: MIPS/MMU: Implement KVM_CAP_SYNC_MMU")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310070530.aARZCSfh-lkp@intel.com/
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29954d5b1e0d67a4cd61c30c2201030c97e94b1e ]
My last change in this area introduced a change which
accounted for primary channel in the interface ref count.
However, it did not reduce this ref count on deallocation
of the primary channel. i.e. during umount.
Fixing this leak here, by dropping this ref count for
primary channel while freeing up the session.
Fixes: fa1d0508bdd4 ("cifs: account for primary channel in the interface list")
Cc: stable@vger.kernel.org
Reported-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa1d0508bdd4a68c5e40f85f635712af8c12f180 ]
The refcounting of server interfaces should account
for the primary channel too. Although this is not
strictly necessary, doing so will account for the primary
channel in DebugData.
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6d8fb54a515f0546ffdb7870102b1238917e567 ]
Today, if the server interfaces RSS capable, we simply
choose the fastest interface to setup a channel. This is not
a scalable approach, and does not make a lot of attempt to
distribute the connections.
This change does a weighted distribution of channels across
all the available server interfaces, where the weight is
a function of the advertised interface speed.
Also make sure that we don't mix rdma and non-rdma for channels.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: fa1d0508bdd4 ("cifs: account for primary channel in the interface list")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05844bd661 ]
We store the last updated time for interface list while
parsing the interfaces. This change is to just print that
info in DebugData.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: fa1d0508bdd4 ("cifs: account for primary channel in the interface list")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de4eceab578ead12a71e5b5588a57e142bbe8ceb ]
When multiple mounts are to the same share from the same client it was not
possible to determine which section of /proc/fs/cifs/Stats (and DebugData)
correspond to that mount. In some recent examples this turned out to be
a significant problem when trying to analyze performance data - since
there are many cases where unless we know the tree id and session id we
can't figure out which stats (e.g. number of SMB3.1.1 requests by type,
the total time they take, which is slowest, how many fail etc.) apply to
which mount. The only existing loosely related ioctl CIFS_IOC_GET_MNT_INFO
does not return the information needed to uniquely identify which tcon
is which mount although it does return various flags and device info.
Add a cifs.ko ioctl CIFS_IOC_GET_TCON_INFO (0x800ccf0c) to return tid,
session id, tree connect count.
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c19204cbd6 ]
checkpatch showed formatting problems with extra spaces,
and extra semicolon and some missing blank lines in some
cifs headers.
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Germano Percossi <germano.percossi@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: de4eceab578e ("smb3: allow dumping session and tcon id to improve stats analysis and debugging")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bca4104b00fec60be330cd32818dd5c70db3d469 ]
Kent reported an occasional KASAN splat in lockdep. Mark then noted:
> I suspect the dodgy access is to chain_block_buckets[-1], which hits the last 4
> bytes of the redzone and gets (incorrectly/misleadingly) attributed to
> nr_large_chain_blocks.
That would mean @size == 0, at which point size_to_bucket() returns -1
and the above happens.
alloc_chain_hlocks() has 'size - req', for the first with the
precondition 'size >= rq', which allows the 0.
This code is trying to split a block, del_chain_block() takes what we
need, and add_chain_block() puts back the remainder, except in the
above case the remainder is 0 sized and things go sideways.
Fixes: 810507fe6f ("locking/lockdep: Reuse freed chain_hlocks entries")
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lkml.kernel.org/r/20231121114126.GH8262@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
