Changes in 4.19.117
amd-xgbe: Use __napi_schedule() in BH context
hsr: check protocol version in hsr_newlink()
net: ipv4: devinet: Fix crash when add/del multicast IP with autojoin
net: ipv6: do not consider routes via gateways for anycast address check
net: qrtr: send msgs from local of same id as broadcast
net: revert default NAPI poll timeout to 2 jiffies
net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes
net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode
ovl: fix value of i_ino for lower hardlink corner case
scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic
jbd2: improve comments about freeing data buffers whose page mapping is NULL
pwm: pca9685: Fix PWM/GPIO inter-operation
ext4: fix incorrect group count in ext4_fill_super error message
ext4: fix incorrect inodes per group in error message
ASoC: Intel: mrfld: fix incorrect check on p->sink
ASoC: Intel: mrfld: return error codes when an error occurs
ALSA: usb-audio: Filter error from connector kctl ops, too
ALSA: usb-audio: Don't override ignore_ctl_error value from the map
ALSA: usb-audio: Don't create jack controls for PCM terminals
ALSA: usb-audio: Check mapping at creating connector controls, too
keys: Fix proc_keys_next to increase position index
tracing: Fix the race between registering 'snapshot' event trigger and triggering 'snapshot' operation
btrfs: check commit root generation in should_ignore_root
mac80211_hwsim: Use kstrndup() in place of kasprintf()
usb: dwc3: gadget: don't enable interrupt when disabling endpoint
usb: dwc3: gadget: Don't clear flags before transfer ended
drm/amd/powerplay: force the trim of the mclk dpm_levels if OD is enabled
ext4: do not zeroout extents beyond i_disksize
kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD
scsi: target: remove boilerplate code
scsi: target: fix hang when multiple threads try to destroy the same iscsi session
x86/microcode/AMD: Increase microcode PATCH_MAX_SIZE
x86/resctrl: Preserve CDP enable over CPU hotplug
x86/resctrl: Fix invalid attempt at removing the default resource group
wil6210: check rx_buff_mgmt before accessing it
wil6210: ignore HALP ICR if already handled
wil6210: add general initialization/size checks
wil6210: make sure Rx ring sizes are correlated
wil6210: remove reset file from debugfs
mm/vmalloc.c: move 'area->pages' after if statement
Linux 4.19.117
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ib4ab9aa34c22c034887be15902a625ecc5622b35
commit 61e5ec0447 upstream.
When enlarging rx_ring_order module param, wil6210 fails to load
because there are not enough Rx buffers.
Fix this by enlarging number of Rx buffers at startup, if needed based
on rx_ring_order.
Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 979c9d8d01 upstream.
HALP ICR is set as long as the FW should stay awake.
To prevent its multiple handling the driver masks this IRQ bit.
However, if there is a different MISC ICR before the driver clears
this bit, there is a risk of race condition between HALP mask and
unmask. This race leads to HALP timeout, in case it is mistakenly
masked.
Add an atomic flag to indicate if HALP ICR should be handled.
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0151da52a upstream.
The default resource group ("rdtgroup_default") is associated with the
root of the resctrl filesystem and should never be removed. New resource
groups can be created as subdirectories of the resctrl filesystem and
they can be removed from user space.
There exists a safeguard in the directory removal code
(rdtgroup_rmdir()) that ensures that only subdirectories can be removed
by testing that the directory to be removed has to be a child of the
root directory.
A possible deadlock was recently fixed with
334b0f4e9b ("x86/resctrl: Fix a deadlock due to inaccurate reference").
This fix involved associating the private data of the "mon_groups"
and "mon_data" directories to the resource group to which they belong
instead of NULL as before. A consequence of this change was that
the original safeguard code preventing removal of "mon_groups" and
"mon_data" found in the root directory failed resulting in attempts to
remove the default resource group that ends in a BUG:
kernel BUG at mm/slub.c:3969!
invalid opcode: 0000 [#1] SMP PTI
Call Trace:
rdtgroup_rmdir+0x16b/0x2c0
kernfs_iop_rmdir+0x5c/0x90
vfs_rmdir+0x7a/0x160
do_rmdir+0x17d/0x1e0
do_syscall_64+0x55/0x1d0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by improving the directory removal safeguard to ensure that
subdirectories of the resctrl root directory can only be removed if they
are a child of the resctrl filesystem's root _and_ not associated with
the default resource group.
Fixes: 334b0f4e9b ("x86/resctrl: Fix a deadlock due to inaccurate reference")
Reported-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/884cbe1773496b5dbec1b6bd11bb50cffa83603d.1584461853.git.reinette.chatre@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 57c46e9f33 ]
A number of hangs have been reported against the target driver; they are
due to the fact that multiple threads may try to destroy the iscsi session
at the same time. This may be reproduced for example when a "targetcli
iscsi/iqn.../tpg1 disable" command is executed while a logout operation is
underway.
When this happens, two or more threads may end up sleeping and waiting for
iscsit_close_connection() to execute "complete(session_wait_comp)". Only
one of the threads will wake up and proceed to destroy the session
structure, the remaining threads will hang forever.
Note that if the blocked threads are somehow forced to wake up with
complete_all(), they will try to free the same iscsi session structure
destroyed by the first thread, causing double frees, memory corruptions
etc...
With this patch, the threads that want to destroy the iscsi session will
increase the session refcount and will set the "session_close" flag to 1;
then they wait for the driver to close the remaining active connections.
When the last connection is closed, iscsit_close_connection() will wake up
all the threads and will wait for the session's refcount to reach zero;
when this happens, iscsit_close_connection() will destroy the session
structure because no one is referencing it anymore.
INFO: task targetcli:5971 blocked for more than 120 seconds.
Tainted: P OE 4.15.0-72-generic #81~16.04.1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
targetcli D 0 5971 1 0x00000080
Call Trace:
__schedule+0x3d6/0x8b0
? vprintk_func+0x44/0xe0
schedule+0x36/0x80
schedule_timeout+0x1db/0x370
? __dynamic_pr_debug+0x8a/0xb0
wait_for_completion+0xb4/0x140
? wake_up_q+0x70/0x70
iscsit_free_session+0x13d/0x1a0 [iscsi_target_mod]
iscsit_release_sessions_for_tpg+0x16b/0x1e0 [iscsi_target_mod]
iscsit_tpg_disable_portal_group+0xca/0x1c0 [iscsi_target_mod]
lio_target_tpg_enable_store+0x66/0xe0 [iscsi_target_mod]
configfs_write_file+0xb9/0x120
__vfs_write+0x1b/0x40
vfs_write+0xb8/0x1b0
SyS_write+0x5c/0xe0
do_syscall_64+0x73/0x130
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Link: https://lore.kernel.org/r/20200313170656.9716-3-mlombard@redhat.com
Reported-by: Matt Coleman <mcoleman@datto.com>
Tested-by: Matt Coleman <mcoleman@datto.com>
Tested-by: Rahul Kundu <rahul.kundu@chelsio.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 396d2e878f upstream.
The host reports support for the synthetic feature X86_FEATURE_SSBD
when any of the three following hardware features are set:
CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31]
CPUID.80000008H:EBX.AMD_SSBD[bit 24]
CPUID.80000008H:EBX.VIRT_SSBD[bit 25]
Either of the first two hardware features implies the existence of the
IA32_SPEC_CTRL MSR, but CPUID.80000008H:EBX.VIRT_SSBD[bit 25] does
not. Therefore, CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] should only be
set in the guest if CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] or
CPUID.80000008H:EBX.AMD_SSBD[bit 24] is set on the host.
Fixes: 0c54914d0c ("KVM: x86: use Intel speculation bugs and features as derived in generic x86 code")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[bwh: Backported to 4.x: adjust indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 801674f34e upstream.
We do not want to create initialized extents beyond end of file because
for e2fsck it is impossible to distinguish them from a case of corrupted
file size / extent tree and so it complains like:
Inode 12, i_size is 147456, should be 163840. Fix? no
Code in ext4_ext_convert_to_initialized() and
ext4_split_convert_extents() try to make sure it does not create
initialized extents beyond inode size however they check against
inode->i_size which is wrong. They should instead check against
EXT4_I(inode)->i_disksize which is the current inode size on disk.
That's what e2fsck is going to see in case of crash before all dirty
data is written. This bug manifests as generic/456 test failure (with
recent enough fstests where fsx got fixed to properly pass
FALLOC_KEEP_SIZE_FL flags to the kernel) when run with dioread_lock
mount option.
CC: stable@vger.kernel.org
Fixes: 21ca087a38 ("ext4: Do not zero out uninitialized extents beyond i_size")
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20200331105016.8674-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a114c4ca64 ]
We track END_TRANSFER command completion. Don't clear transfer
started/ended flag prematurely. Otherwise, we'd run into the problem
with restarting transfer before END_TRANSFER command finishes.
Fixes: 6d8a019614 ("usb: dwc3: gadget: check for Missed Isoc from event status")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7ea8620483 upstream.
syzbot reports a warning:
precision 33020 too large
WARNING: CPU: 0 PID: 9618 at lib/vsprintf.c:2471 set_precision+0x150/0x180 lib/vsprintf.c:2471
vsnprintf+0xa7b/0x19a0 lib/vsprintf.c:2547
kvasprintf+0xb2/0x170 lib/kasprintf.c:22
kasprintf+0xbb/0xf0 lib/kasprintf.c:59
hwsim_del_radio_nl+0x63a/0x7e0 drivers/net/wireless/mac80211_hwsim.c:3625
genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
...
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Thus it seems that kasprintf() with "%.*s" format can not be used for
duplicating a string with arbitrary length. Replace it with kstrndup().
Note that later this string is limited to NL80211_WIPHY_NAME_MAXLEN == 64,
but the code is simpler this way.
Reported-by: syzbot+6693adf1698864d21734@syzkaller.appspotmail.com
Reported-by: syzbot+a4aee3f42d7584d76761@syzkaller.appspotmail.com
Cc: stable@kernel.org
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Link: https://lore.kernel.org/r/20200410123257.14559-1-tuomas.tynkkynen@iki.fi
[johannes: add note about length limit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d4225fc22 upstream.
Previously we would set the reloc root's last snapshot to transid - 1.
However there was a problem with doing this, and we changed it to
setting the last snapshot to the generation of the commit node of the fs
root.
This however broke should_ignore_root(). The assumption is that if we
are in a generation newer than when the reloc root was created, then we
would find the reloc root through normal backref lookups, and thus can
ignore any fs roots we find with an old enough reloc root.
Now that the last snapshot could be considerably further in the past
than before, we'd end up incorrectly ignoring an fs root. Thus we'd
find no nodes for the bytenr we were searching for, and we'd fail to
relocate anything. We'd loop through the relocate code again and see
that there were still used space in that block group, attempt to
relocate those bytenr's again, fail in the same way, and just loop like
this forever. This is tricky in that we have to not modify the fs root
at all during this time, so we need to have a block group that has data
in this fs root that is not shared by any other root, which is why this
has been difficult to reproduce.
Fixes: 054570a1dc ("Btrfs: fix relocation incorrectly dropping data references")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86d32f9a7c upstream.
If seq_file .next function does not change position index,
read after some lseek can generate unexpected output:
$ dd if=/proc/keys bs=1 # full usual output
0f6bfdf5 I--Q--- 2 perm 3f010000 1000 1000 user 4af2f79ab8848d0a: 740
1fb91b32 I--Q--- 3 perm 1f3f0000 1000 65534 keyring _uid.1000: 2
27589480 I--Q--- 1 perm 0b0b0000 0 0 user invocation_id: 16
2f33ab67 I--Q--- 152 perm 3f030000 0 0 keyring _ses: 2
33f1d8fa I--Q--- 4 perm 3f030000 1000 1000 keyring _ses: 1
3d427fda I--Q--- 2 perm 3f010000 1000 1000 user 69ec44aec7678e5a: 740
3ead4096 I--Q--- 1 perm 1f3f0000 1000 65534 keyring _uid_ses.1000: 1
521+0 records in
521+0 records out
521 bytes copied, 0,00123769 s, 421 kB/s
But a read after lseek in middle of last line results in the partial
last line and then a repeat of the final line:
$ dd if=/proc/keys bs=500 skip=1
dd: /proc/keys: cannot skip to specified offset
g _uid_ses.1000: 1
3ead4096 I--Q--- 1 perm 1f3f0000 1000 65534 keyring _uid_ses.1000: 1
0+1 records in
0+1 records out
97 bytes copied, 0,000135035 s, 718 kB/s
and a read after lseek beyond end of file results in the last line being
shown:
$ dd if=/proc/keys bs=1000 skip=1 # read after lseek beyond end of file
dd: /proc/keys: cannot skip to specified offset
3ead4096 I--Q--- 1 perm 1f3f0000 1000 65534 keyring _uid_ses.1000: 1
0+1 records in
0+1 records out
76 bytes copied, 0,000119981 s, 633 kB/s
See https://bugzilla.kernel.org/show_bug.cgi?id=206283
Fixes: 1f4aace60b ("fs/seq_file.c: simplify seq_file iteration code ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9cc5f232a4 upstream.
This driver allows pwms to be requested as gpios via gpiolib. Obviously,
it should not be allowed to request a GPIO when its corresponding PWM is
already requested (and vice versa). So it requires some exclusion code.
Given that the PWMm and GPIO cores are not synchronized with respect to
each other, this exclusion code will also require proper
synchronization.
Such a mechanism was in place, but was inadvertently removed by Uwe's
clean-up in commit e926b12c61 ("pwm: Clear chip_data in pwm_put()").
Upon revisiting the synchronization mechanism, we found that
theoretically, it could allow two threads to successfully request
conflicting PWMs/GPIOs.
Replace with a bitmap which tracks PWMs in-use, plus a mutex. As long as
PWM and GPIO's respective request/free functions modify the in-use
bitmap while holding the mutex, proper synchronization will be
guaranteed.
Reported-by: YueHaibing <yuehaibing@huawei.com>
Fixes: e926b12c61 ("pwm: Clear chip_data in pwm_put()")
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: YueHaibing <yuehaibing@huawei.com>
Link: https://lkml.org/lkml/2019/5/31/963
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[cg: Tested on an i.MX6Q board with two NXP PCA9685 chips]
Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> # cg's rebase
Link: https://lore.kernel.org/lkml/20200330160238.GD2817345@ulmo/
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 300b124fcf upstream.
Commit 6dde1e42f4 ("ovl: make i_ino consistent with st_ino in more
cases"), relaxed the condition nfs_export=on in order to set the value of
i_ino to xino map of real ino.
Specifically, it also relaxed the pre-condition that index=on for
consistent i_ino. This opened the corner case of lower hardlink in
ovl_get_inode(), which calls ovl_fill_inode() with ino=0 and then
ovl_init_inode() is called to set i_ino to lower real ino without the xino
mapping.
Pass the correct values of ino;fsid in this case to ovl_fill_inode(), so it
can initialize i_ino correctly.
Fixes: 6dde1e42f4 ("ovl: make i_ino consistent with st_ino in more ...")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e045124e93 ]
In VLAN-unaware mode, the Egress Tag (EG_TAG) field in Port VLAN
Control register must be set to Consistent to let tagged frames pass
through as is, otherwise their tags will be stripped.
Fixes: 83163f7dca ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 806fd188ce ]
After commit bfcb813203 ("net: dsa:
configure the MTU for switch ports") my Lamobo R1 platform which uses
an allwinner,sun7i-a20-gmac compatible Ethernet MAC started to fail
by rejecting a MTU of 1536. The reason for that is that the DMA
capabilities are not readable on this version of the IP, and there
is also no 'tx-fifo-depth' property being provided in Device Tree. The
property is documented as optional, and is not provided.
Chen-Yu indicated that the FIFO sizes are 4KB for TX and 16KB for RX, so
provide these values through platform data as an immediate fix until
various Device Tree sources get updated accordingly.
Fixes: eaf4fac478 ("net: stmmac: Do not accept invalid MTU values")
Suggested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a4837980fd ]
For HZ < 1000 timeout 2000us rounds up to 1 jiffy but expires randomly
because next timer interrupt could come shortly after starting softirq.
For commonly used CONFIG_HZ=1000 nothing changes.
Fixes: 7acf8a1e8a ("Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning")
Reported-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6dbf02acef ]
If the local node id(qrtr_local_nid) is not modified after its
initialization, it equals to the broadcast node id(QRTR_NODE_BCAST).
So the messages from local node should not be taken as broadcast
and keep the process going to send them out anyway.
The definitions are as follow:
static unsigned int qrtr_local_nid = NUMA_NO_NODE;
Fixes: fdf5fd3975 ("net: qrtr: Broadcast messages only from control port")
Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 03e2a984b6 ]
The behaviour for what is considered an anycast address changed in
commit 45e4fd2668 ("ipv6: Only create RTF_CACHE routes after
encountering pmtu exception"). This now considers the first
address in a subnet where there is a route via a gateway
to be an anycast address.
This breaks path MTU discovery and traceroutes when a host in a
remote network uses the address at the start of a prefix
(eg 2600:: advertised as 2600::/48 in the DFZ) as ICMP errors
will not be sent to anycast addresses.
This patch excludes any routes with a gateway, or via point to
point links, like the behaviour previously from
rt6_is_gw_or_nonexthop in net/ipv6/route.c.
This can be tested with:
ip link add v1 type veth peer name v2
ip netns add test
ip netns exec test ip link set lo up
ip link set v2 netns test
ip link set v1 up
ip netns exec test ip link set v2 up
ip addr add 2001:db8::1/64 dev v1 nodad
ip addr add 2001:db8:100:: dev lo nodad
ip netns exec test ip addr add 2001:db8::2/64 dev v2 nodad
ip netns exec test ip route add unreachable 2001:db8:1::1
ip netns exec test ip route add 2001:db8:100::/64 via 2001:db8::1
ip netns exec test sysctl net.ipv6.conf.all.forwarding=1
ip route add 2001:db8:1::1 via 2001:db8::2
ping -I 2001:db8::1 2001:db8:1::1 -c1
ping -I 2001:db8:100:: 2001:db8:1::1 -c1
ip addr delete 2001:db8:100:: dev lo
ip netns delete test
Currently the first ping will get back a destination unreachable ICMP
error, but the second will never get a response, with "icmp6_send:
acast source" logged. After this patch, both get destination
unreachable ICMP replies.
Fixes: 45e4fd2668 ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception")
Signed-off-by: Tim Stallard <code@timstallard.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 690cc86321 ]
When CONFIG_IP_MULTICAST is not set and multicast ip is added to the device
with autojoin flag or when multicast ip is deleted kernel will crash.
steps to reproduce:
ip addr add 224.0.0.0/32 dev eth0
ip addr del 224.0.0.0/32 dev eth0
or
ip addr add 224.0.0.0/32 dev eth0 autojoin
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088
pc : _raw_write_lock_irqsave+0x1e0/0x2ac
lr : lock_sock_nested+0x1c/0x60
Call trace:
_raw_write_lock_irqsave+0x1e0/0x2ac
lock_sock_nested+0x1c/0x60
ip_mc_config.isra.28+0x50/0xe0
inet_rtm_deladdr+0x1a8/0x1f0
rtnetlink_rcv_msg+0x120/0x350
netlink_rcv_skb+0x58/0x120
rtnetlink_rcv+0x14/0x20
netlink_unicast+0x1b8/0x270
netlink_sendmsg+0x1a0/0x3b0
____sys_sendmsg+0x248/0x290
___sys_sendmsg+0x80/0xc0
__sys_sendmsg+0x68/0xc0
__arm64_sys_sendmsg+0x20/0x30
el0_svc_common.constprop.2+0x88/0x150
do_el0_svc+0x20/0x80
el0_sync_handler+0x118/0x190
el0_sync+0x140/0x180
Fixes: 93a714d6b5 ("multicast: Extend ip address command to enable multicast group join/leave on")
Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4faab8c446 ]
In the current hsr code, only 0 and 1 protocol versions are valid.
But current hsr code doesn't check the version, which is received by
userspace.
Test commands:
ip link add dummy0 type dummy
ip link add dummy1 type dummy
ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 version 4
In the test commands, version 4 is invalid.
So, the command should be failed.
After this patch, following error will occur.
"Error: hsr: Only versions 0..1 are supported."
Fixes: ee1c279772 ("net/hsr: Added support for HSR v1")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d518691cbd ]
The driver uses __napi_schedule_irqoff() which is fine as long as it is
invoked with disabled interrupts by everybody. Since the commit
mentioned below the driver may invoke xgbe_isr_task() in tasklet/softirq
context. This may lead to list corruption if another driver uses
__napi_schedule_irqoff() in IRQ context.
Use __napi_schedule() which safe to use from IRQ and softirq context.
Fixes: 85b85c8534 ("amd-xgbe: Re-issue interrupt if interrupt status not cleared")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A sensor may need to be monitored by two or more thermal governors to
deploy different mitigation strategies to control the device temperature.
To achieve this the sensors driver has to register the same sensor as
multiple thermal zones and then let the different governors monitor and
mitigate. The sensor driver should handle the aggregation of thresholds,
trip notification and synchronization between thermal zones.
Add support in of-thermal to create and handle sibling thermal zones.
Thermal zones that share the same sensor are siblings. To establish a
relationship between then the sibling zones, a sensor meta data is shared
across multiple sibling thermal zones. This meta data will aid in
traversing through all the sibling thermal zones.
Test: build
Bug: 149945768
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Change-Id: I2e26d71ca30927dfa23b58e00a7de246bfebb274
(cherry picked commit from 8a12149c264c7b871932ad90f76e5981452bb4bb)
Fixes: 3b10834869 ("ANDROID: GKI: Add devm_thermal_of_virtual_sensor_register API.")
[hridya: partial cherry-pick from snapshot]
Signed-off-by: Hridya Valsaraju <hridya@google.com>
POWERPC needs this hook. SPARC could use it too.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
(cherry picked from commit f726f30e32)
Signed-off-by: Swathi Sridhar <swatsrid@codeaurora.org>
(cherry picked from commit 4008eb493aa2f95094511125f136eb6ffbfa33b8)
[surenb: original patch is cherry picked from 4.4 kernel]
Bug: 154347709
Test: build and verify no ABI diffs
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: I1d08b56e2cbb1c6cb3478654b89abca3af83709a
* aosp/upstream-f2fs-stable-linux-4.19.y:
f2fs: fix quota_sync failure due to f2fs_lock_op
f2fs: support read iostat
f2fs: Fix the accounting of dcc->undiscard_blks
f2fs: fix to handle error path of f2fs_ra_meta_pages()
f2fs: report the discard cmd errors properly
f2fs: fix long latency due to discard during umount
f2fs: add tracepoint for f2fs iostat
f2fs: introduce sysfs/data_io_flag to attach REQ_META/FUA
ubifs: wire up FS_IOC_GET_ENCRYPTION_NONCE
f2fs: wire up FS_IOC_GET_ENCRYPTION_NONCE
ext4: wire up FS_IOC_GET_ENCRYPTION_NONCE
fscrypt: add FS_IOC_GET_ENCRYPTION_NONCE ioctl
Change-Id: I976edb3288576caa0c56eff202690b1159fcf827
Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
Including the 4.19.116 update
Leaf changes summary: 2 artifacts changed
Changed leaf types summary: 2 leaf types changed
Removed/Changed/Added functions summary: 0 Removed, 0 Changed, 0 Added function
Removed/Changed/Added variables summary: 0 Removed, 0 Changed, 0 Added variable
'struct dma_buf_ops at dma-buf.h:53:1' changed:
type size changed from 1088 to 1152 (in bits)
1 data member insertion:
'void ()* dma_buf_ops::get_uuid', at offset 1024 (in bits) at dma-buf.h:371:1
there are data member changes:
'void ()* dma_buf_ops::get_flags' offset changed from 1024 to 1088 (in bits) (by +64 bits)
46 impacted interfaces:
'struct drm_driver at drm_drv.h:70:1' changed:
type size changed from 3776 to 3840 (in bits)
1 data member insertion:
'void ()* drm_driver::gem_prime_get_uuid', at offset 2432 (in bits) at drm_drv.h:506:1
there are data member changes:
'void ()* drm_driver::dumb_create' offset changed from 2432 to 2496 (in bits) (by +64 bits)
'void ()* drm_driver::dumb_map_offset' offset changed from 2496 to 2560 (in bits) (by +64 bits)
'void ()* drm_driver::dumb_destroy' offset changed from 2560 to 2624 (in bits) (by +64 bits)
'const vm_operations_struct* drm_driver::gem_vm_ops' offset changed from 2624 to 2688 (in bits) (by +64 bits)
'int drm_driver::major' offset changed from 2688 to 2752 (in bits) (by +64 bits)
'int drm_driver::minor' offset changed from 2720 to 2784 (in bits) (by +64 bits)
'int drm_driver::patchlevel' offset changed from 2752 to 2816 (in bits) (by +64 bits)
'char* drm_driver::name' offset changed from 2816 to 2880 (in bits) (by +64 bits)
'char* drm_driver::desc' offset changed from 2880 to 2944 (in bits) (by +64 bits)
'char* drm_driver::date' offset changed from 2944 to 3008 (in bits) (by +64 bits)
'u32 drm_driver::driver_features' offset changed from 3008 to 3072 (in bits) (by +64 bits)
'const drm_ioctl_desc* drm_driver::ioctls' offset changed from 3072 to 3136 (in bits) (by +64 bits)
'int drm_driver::num_ioctls' offset changed from 3136 to 3200 (in bits) (by +64 bits)
'const file_operations* drm_driver::fops' offset changed from 3200 to 3264 (in bits) (by +64 bits)
'list_head drm_driver::legacy_dev_list' offset changed from 3264 to 3328 (in bits) (by +64 bits)
'void ()* drm_driver::firstopen' offset changed from 3392 to 3456 (in bits) (by +64 bits)
'void ()* drm_driver::preclose' offset changed from 3456 to 3520 (in bits) (by +64 bits)
'void ()* drm_driver::dma_ioctl' offset changed from 3520 to 3584 (in bits) (by +64 bits)
'void ()* drm_driver::dma_quiescent' offset changed from 3584 to 3648 (in bits) (by +64 bits)
'void ()* drm_driver::context_dtor' offset changed from 3648 to 3712 (in bits) (by +64 bits)
'int drm_driver::dev_priv_size' offset changed from 3712 to 3776 (in bits) (by +64 bits)
185 impacted interfaces:
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Id01915f1855a682195fc070fc894f4164f266066
Changes in 4.19.116
ARM: dts: sun8i-a83t-tbs-a711: HM5065 doesn't like such a high voltage
bus: sunxi-rsb: Return correct data when mixing 16-bit and 8-bit reads
net: vxge: fix wrong __VA_ARGS__ usage
hinic: fix a bug of waitting for IO stopped
hinic: fix wrong para of wait_for_completion_timeout
cxgb4/ptp: pass the sign of offset delta in FW CMD
qlcnic: Fix bad kzalloc null test
i2c: st: fix missing struct parameter description
cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL
media: venus: hfi_parser: Ignore HEVC encoding for V1
firmware: arm_sdei: fix double-lock on hibernate with shared events
null_blk: Fix the null_add_dev() error path
null_blk: Handle null_add_dev() failures properly
null_blk: fix spurious IO errors after failed past-wp access
xhci: bail out early if driver can't accress host in resume
x86: Don't let pgprot_modify() change the page encryption bit
block: keep bdi->io_pages in sync with max_sectors_kb for stacked devices
irqchip/versatile-fpga: Handle chained IRQs properly
sched: Avoid scale real weight down to zero
selftests/x86/ptrace_syscall_32: Fix no-vDSO segfault
PCI/switchtec: Fix init_completion race condition with poll_wait()
media: i2c: video-i2c: fix build errors due to 'imply hwmon'
libata: Remove extra scsi_host_put() in ata_scsi_add_hosts()
pstore/platform: fix potential mem leak if pstore_init_fs failed
gfs2: Don't demote a glock until its revokes are written
x86/boot: Use unsigned comparison for addresses
efi/x86: Ignore the memory attributes table on i386
genirq/irqdomain: Check pointer in irq_domain_alloc_irqs_hierarchy()
block: Fix use-after-free issue accessing struct io_cq
media: i2c: ov5695: Fix power on and off sequences
usb: dwc3: core: add support for disabling SS instances in park mode
irqchip/gic-v4: Provide irq_retrigger to avoid circular locking dependency
md: check arrays is suspended in mddev_detach before call quiesce operations
firmware: fix a double abort case with fw_load_sysfs_fallback
locking/lockdep: Avoid recursion in lockdep_count_{for,back}ward_deps()
block, bfq: fix use-after-free in bfq_idle_slice_timer_body
btrfs: qgroup: ensure qgroup_rescan_running is only set when the worker is at least queued
btrfs: remove a BUG_ON() from merge_reloc_roots()
btrfs: track reloc roots based on their commit root bytenr
IB/mlx5: Replace tunnel mpls capability bits for tunnel_offloads
uapi: rename ext2_swab() to swab() and share globally in swab.h
slub: improve bit diffusion for freelist ptr obfuscation
ASoC: fix regwmask
ASoC: dapm: connect virtual mux with default value
ASoC: dpcm: allow start or stop during pause for backend
ASoC: topology: use name_prefix for new kcontrol
usb: gadget: f_fs: Fix use after free issue as part of queue failure
usb: gadget: composite: Inform controller driver of self-powered
ALSA: usb-audio: Add mixer workaround for TRX40 and co
ALSA: hda: Add driver blacklist
ALSA: hda: Fix potential access overflow in beep helper
ALSA: ice1724: Fix invalid access for enumerated ctl items
ALSA: pcm: oss: Fix regression by buffer overflow fix
ALSA: doc: Document PC Beep Hidden Register on Realtek ALC256
ALSA: hda/realtek - Set principled PC Beep configuration for ALC256
ALSA: hda/realtek - Remove now-unnecessary XPS 13 headphone noise fixups
ALSA: hda/realtek - Add quirk for MSI GL63
media: ti-vpe: cal: fix disable_irqs to only the intended target
acpi/x86: ignore unspecified bit positions in the ACPI global lock field
thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n
nvme-fc: Revert "add module to ops template to allow module references"
nvme: Treat discovery subsystems as unique subsystems
PCI: pciehp: Fix indefinite wait on sysfs requests
PCI/ASPM: Clear the correct bits when enabling L1 substates
PCI: Add boot interrupt quirk mechanism for Xeon chipsets
PCI: endpoint: Fix for concurrent memory allocation in OB address region
tpm: Don't make log failures fatal
tpm: tpm1_bios_measurements_next should increase position index
tpm: tpm2_bios_measurements_next should increase position index
KEYS: reaching the keys quotas correctly
irqchip/versatile-fpga: Apply clear-mask earlier
pstore: pstore_ftrace_seq_next should increase position index
MIPS/tlbex: Fix LDDIR usage in setup_pw() for Loongson-3
MIPS: OCTEON: irq: Fix potential NULL pointer dereference
ath9k: Handle txpower changes even when TPC is disabled
signal: Extend exec_id to 64bits
x86/entry/32: Add missing ASM_CLAC to general_protection entry
KVM: nVMX: Properly handle userspace interrupt window request
KVM: s390: vsie: Fix region 1 ASCE sanity shadow address checks
KVM: s390: vsie: Fix delivery of addressing exceptions
KVM: x86: Allocate new rmap and large page tracking when moving memslot
KVM: VMX: Always VMCLEAR in-use VMCSes during crash with kexec support
KVM: x86: Gracefully handle __vmalloc() failure during VM allocation
KVM: VMX: fix crash cleanup when KVM wasn't used
CIFS: Fix bug which the return value by asynchronous read is error
mtd: spinand: Stop using spinand->oobbuf for buffering bad block markers
mtd: spinand: Do not erase the block before writing a bad block marker
Btrfs: fix crash during unmount due to race with delayed inode workers
btrfs: set update the uuid generation as soon as possible
btrfs: drop block from cache on error in relocation
btrfs: fix missing file extent item for hole after ranged fsync
btrfs: fix missing semaphore unlock in btrfs_sync_file
crypto: mxs-dcp - fix scatterlist linearization for hash
erofs: correct the remaining shrink objects
powerpc/pseries: Drop pointless static qualifier in vpa_debugfs_init()
x86/speculation: Remove redundant arch_smt_update() invocation
tools: gpio: Fix out-of-tree build regression
mm: Use fixed constant in page_frag_alloc instead of size + 1
net: qualcomm: rmnet: Allow configuration updates to existing devices
arm64: dts: allwinner: h6: Fix PMU compatible
dm writecache: add cond_resched to avoid CPU hangs
dm verity fec: fix memory leak in verity_fec_dtr
scsi: zfcp: fix missing erp_lock in port recovery trigger for point-to-point
arm64: armv8_deprecated: Fix undef_hook mask for thumb setend
selftests: vm: drop dependencies on page flags from mlock2 tests
rtc: omap: Use define directive for PIN_CONFIG_ACTIVE_HIGH
drm/etnaviv: rework perfmon query infrastructure
powerpc/pseries: Avoid NULL pointer dereference when drmem is unavailable
NFS: Fix a page leak in nfs_destroy_unlinked_subrequests()
ext4: fix a data race at inode->i_blocks
fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
ocfs2: no need try to truncate file beyond i_size
perf tools: Support Python 3.8+ in Makefile
s390/diag: fix display of diagnose call statistics
Input: i8042 - add Acer Aspire 5738z to nomux list
clk: ingenic/jz4770: Exit with error if CGU init failed
kmod: make request_module() return an error when autoloading is disabled
cpufreq: powernv: Fix use-after-free
hfsplus: fix crash and filesystem corruption when deleting files
libata: Return correct status in sata_pmp_eh_recover_pm() when ATA_DFLAG_DETACH is set
ipmi: fix hung processes in __get_guid()
xen/blkfront: fix memory allocation flags in blkfront_setup_indirect()
powerpc/powernv/idle: Restore AMR/UAMOR/AMOR after idle
powerpc/64/tm: Don't let userspace set regs->trap via sigreturn
powerpc/hash64/devmap: Use H_PAGE_THP_HUGE when setting up huge devmap PTE entries
powerpc/xive: Use XIVE_BAD_IRQ instead of zero to catch non configured IPIs
powerpc/kprobes: Ignore traps that happened in real mode
scsi: mpt3sas: Fix kernel panic observed on soft HBA unplug
powerpc: Add attributes for setjmp/longjmp
powerpc: Make setjmp/longjmp signature standard
btrfs: use nofs allocations for running delayed items
dm zoned: remove duplicate nr_rnd_zones increase in dmz_init_zone()
crypto: caam - update xts sector size for large input length
crypto: ccree - improve error handling
crypto: ccree - zero out internal struct before use
crypto: ccree - don't mangle the request assoclen
crypto: ccree - dec auth tag size from cryptlen map
crypto: ccree - only try to map auth tag if needed
Revert "drm/dp_mst: Remove VCPI while disabling topology mgr"
drm/dp_mst: Fix clearing payload state on topology disable
drm: Remove PageReserved manipulation from drm_pci_alloc
ftrace/kprobe: Show the maxactive number on kprobe_events
powerpc/fsl_booke: Avoid creating duplicate tlb1 entry
misc: echo: Remove unnecessary parentheses and simplify check for zero
etnaviv: perfmon: fix total and idle HI cyleces readout
mfd: dln2: Fix sanity checking for endpoints
efi/x86: Fix the deletion of variables in mixed mode
Linux 4.19.116
Change-Id: If09fbb53fcb11ea01eaaa7fee7ed21ed6234f352
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
