[ Upstream commit 8e64d2356cbc800b4cd0e3e614797f76bcf0cdb8 ]
dasd_add_busid() can return an error via ERR_PTR() if an allocation
fails. However, two callsites in dasd_copy_pair_store() do not check
the result, potentially resulting in a NULL pointer dereference. Fix
this by checking the result with IS_ERR() and returning the error up
the stack.
Fixes: a91ff09d39 ("s390/dasd: add copy pair setup")
Signed-off-by: Carlos López <clopez@suse.de>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240715112434.2111291-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb95678ee930d67d79fc83f0a700245ae7230455 ]
We skip the run_truncate_head call also for $MFT::$ATTR_BITMAP.
Otherwise wnd_map()/run_lookup_entry will not find the disk position for the bitmap parts.
Fixes: 0e5b044cbf ("fs/ntfs3: Refactoring attr_set_size to restore after errors")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 463927a8902a9f22c3633960119410f57d4c8920 ]
`rtc_add_offset()` is called by `__rtc_read_time()`
and `__rtc_read_alarm()` to add the RTC's offset to
the raw read-outs from the device drivers. However,
in the latter case, a fix-up algorithm is run if
the RTC device does not report a full `struct rtc_time`
alarm value. In that case, the offset was forgot to be
added.
Fixes: fd6792bb02 ("rtc: fix alarm read and set offset")
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20240619140451.2800578-1-csokas.bence@prolan.hu
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f3819e8c483771a59cf9d3190cd68a7a990083c ]
According to the C standard 3.4.3p3, the result of signed integer overflow
is undefined. The macro nilfs_cnt32_ge(), which compares two sequence
numbers, uses signed integer subtraction that can overflow, and therefore
the result of the calculation may differ from what is expected due to
undefined behavior in different environments.
Similar to an earlier change to the jiffies-related comparison macros in
commit 5a581b367b ("jiffies: Avoid undefined behavior from signed
overflow"), avoid this potential issue by changing the definition of the
macro to perform the subtraction as unsigned integers, then cast the
result to a signed integer for comparison.
Link: https://lkml.kernel.org/r/20130727225828.GA11864@linux.vnet.ibm.com
Link: https://lkml.kernel.org/r/20240702183512.6390-1-konishi.ryusuke@gmail.com
Fixes: 9ff05123e3 ("nilfs2: segment constructor")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f9f022e975d930709848a86a1c79775b0585202 ]
Patch series "fs/proc: move page_mapcount() to fs/proc/internal.h".
With all other page_mapcount() users in the tree gone, move
page_mapcount() to fs/proc/internal.h, rename it and extend the
documentation to prevent future (ab)use.
... of course, I find some issues while working on that code that I sort
first ;)
We'll now only end up calling page_mapcount() [now
folio_precise_page_mapcount()] on pages mapped via present page table
entries. Except for /proc/kpagecount, that still does questionable
things, but we'll leave that legacy interface as is for now.
Did a quick sanity check. Likely we would want some better selfestest for
/proc/$/pagemap + smaps. I'll see if I can find some time to write some
more.
This patch (of 6):
Looks like we never taught pagemap_pmd_range() about the existence of
PMD-mapped file THPs. Seems to date back to the times when we first added
support for non-anon THPs in the form of shmem THP.
Link: https://lkml.kernel.org/r/20240607122357.115423-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240607122357.115423-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Fixes: 800d8c63b2 ("shmem: add huge pages support")
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Lance Yang <ioworker0@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfd2428f3a80647af681df4793e473258aa755da ]
The Pin Multiplex attachment in Rev.1.10 of the R-Car V4H Series
Hardware User's Manual still has two alternate pins named both TCLK3
and TCLK4. To differentiate, the pin control driver uses "TCLK[34]" and
"TCLK[34]_X". In addition, there are alternate pins without suffix, and
with an "_A" or "_B" suffix.
Increase uniformity by adopting R-Car V4M naming:
- Rename "TCLK2_B" to "TCLK2_C",
- Rename "TCLK[12]_A" to "TCLK[12]_B",
- Rename "TCLK[12]" to "TCLK[12]_A",
- Rename "TCLK[34]_A" to "TCLK[34]_C",
- Rename "TCLK[34]_X" to "TCLK[34]_A",
- Rename "TCLK[34]" to "TCLK[34]_B".
Fixes: ad9bb2fec6 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support")
Fixes: 0df46188a5 ("pinctrl: renesas: r8a779g0: Add missing TCLKx_A/TCLKx_B/TCLKx_X")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/2845ff1f8fe1fd8d23d2f307ad5e8eb8243da608.1717754960.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5350f38150a171322b50c0a48efa671885f87050 ]
(H)SCIF instance 3 has two alternate pin groups: "hscif3" and
"hscif3_a", resp. "scif3" and "scif3_a", but the actual meanings of the
pins within the groups do not match.
Increase uniformity by adopting R-Car V4M naming:
- Rename "hscif3_a" to "hscif3_b",
- Rename "hscif3" to "hscif3_a",
- Rename "scif3" to "scif3_b".
While at it, remove unneeded separators.
Fixes: ad9bb2fec6 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support")
Fixes: 050442ae4c ("pinctrl: renesas: r8a779g0: Add pins, groups and functions")
Fixes: 213b713255 ("pinctrl: renesas: r8a779g0: Add missing HSCIF3_A")
Fixes: 49e4697656 ("pinctrl: renesas: r8a779g0: Add missing SCIF3")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/61fdde58e369e8070ffd3c5811c089e6219c7ecc.1717754960.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cf834a1669ea433aeee4c82c642776899c87451 ]
The Pin Multiplex attachment in Rev.1.10 of the R-Car V4H Series
Hardware User's Manual still has two alternate pin groups (GP0_14-18
and GP1_6-10) each named both HSCIF1 and SCIF1. To differentiate, the
pin control driver uses "(h)scif1" and "(h)scif1_x", which were
considered temporary names until the conflict was sorted out.
Fix this by adopting R-Car V4M naming:
- Rename "(h)scif1" to "(h)scif1_a",
- Rename "(h)scif1_x" to "(h)scif1_b".
Adopt the R-Car V4M naming "(h)scif1_a" and "(h)scif1_b" to increase
uniformity.
While at it, remove unneeded separators.
Fixes: ad9bb2fec6 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support")
Fixes: 050442ae4c ("pinctrl: renesas: r8a779g0: Add pins, groups and functions")
Fixes: cf4f789184 ("pinctrl: renesas: r8a779g0: Add missing HSCIF1_X")
Fixes: 9c151c2be9 ("pinctrl: renesas: r8a779g0: Add missing SCIF1_X")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/5009130d1867e12abf9b231c8838fd05e2b28bee.1717754960.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4976d61ca39ce51f422e094de53b46e2e3ac5c0d ]
The Pin Multiplex attachment in Rev.1.10 of the R-Car V4H Series
Hardware User's Manual still has two alternate pins named both
"FXR_TXEN[AB]". To differentiate, the pin control driver uses
"FXR_TXEN[AB]" and "FXR_TXEN[AB]_X", which were considered temporary
names until the conflict was sorted out.
Fix this by adopting R-Car V4M naming:
- Rename "FXR_TXEN[AB]" to "FXR_TXEN[AB]_A",
- Rename "FXR_TXEN[AB]_X" to "FXR_TXEN[AB]_B".
Fixes: ad9bb2fec6 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support")
Fixes: 1c2646b5ce ("pinctrl: renesas: r8a779g0: Add missing FlexRay")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/5e1e9abb46c311d4c54450d991072d6d0e66f14c.1717754960.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69505fe98f198ee813898cbcaf6770949636430b ]
The issue was detected due to xfstest 465 failing.
Fixes: 4342306f0f ("fs/ntfs3: Add file operations and implementation")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f500f2011c0bbb6e1cacab74b4c99222e60248e ]
of_get_next_child() will increase refcount of the returned node, need
use of_node_put() on it when done.
Per current implementation, 'child' will be override by
for_each_child_of_node(np, child), so use of_get_child_count to avoid
refcount leakage.
Fixes: 17723111e6 ("pinctrl: add pinctrl-mxs support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/20240504-pinctrl-cleanup-v2-18-26c5f2dc1181@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b401f4a7170125365160c9af267a41ff6b39001 ]
This driver calls pinctrl_register_and_init() which is not
devm_ managed, it will leads memory leak if pinctrl_enable()
fails. Replace it with devm_pinctrl_register_and_init().
And add missing of_node_put() in the error path.
Fixes: 5038a66dad01 ("pinctrl: core: delete incorrect free in pinctrl_enable()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240606023704.3931561-4-yangyingliang@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88b3f108502bc45e6ebd005702add46759f3f45a ]
ti_iodelay_remove() is only called after ti_iodelay_probe() completed
successfully. In this case platform_set_drvdata() was called with a
non-NULL argument and so platform_get_drvdata() won't return NULL.
Simplify by removing the if block with the always false condition.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009083856.222030-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Stable-dep-of: 9b401f4a7170 ("pinctrl: ti: ti-iodelay: fix possible memory leak when pinctrl_enable() fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f773bfbdd428819328a2d185976cfc6ae811cd3 ]
This driver calls pinctrl_register_and_init() which is not
devm_ managed, it will leads memory leak if pinctrl_enable()
fails. Replace it with devm_pinctrl_register_and_init().
And call pcs_free_resources() if pinctrl_enable() fails.
Fixes: 5038a66dad01 ("pinctrl: core: delete incorrect free in pinctrl_enable()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240606023704.3931561-3-yangyingliang@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae1cf4759972c5fe665ee4c5e0c29de66fe3cf4a ]
In devm_pinctrl_register(), if pinctrl_enable() fails in pinctrl_register(),
the "pctldev" has not been added to dev resources, so devm_pinctrl_dev_release()
can not be called, it leads memory leak.
Introduce pinctrl_uninit_controller(), call it in the error path to free memory.
Fixes: 5038a66dad01 ("pinctrl: core: delete incorrect free in pinctrl_enable()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240606023704.3931561-2-yangyingliang@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24c5100aceedcd47af89aaa404d4c96cd2837523 ]
An additional condition causes the mft record to be read from disk
and get the file type dt_type.
Fixes: 22457c047ed97 ("fs/ntfs3: Modified fix directory element type detection")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25610ff98d4a34e6a85cbe4fd8671be6b0829f8f ]
Сorrected calculation of required space len (in clusters)
for attribute data storage in case of compression.
Fixes: be71b5cba2 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 487f8d482a7e51a640b8f955a398f906a4f83951 ]
COMPRESSION_UNIT and NTFS_LZNT_CUNIT mean the same thing
(1u<<NTFS_LZNT_CUNIT) determines the size for compression (in clusters).
COMPRESS_MAX_CLUSTER is not used in the code.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Stable-dep-of: 25610ff98d4a ("fs/ntfs3: Fix transform resident to nonresident for compressed files")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97a6815e50 ]
This way code will be more readable.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Stable-dep-of: 25610ff98d4a ("fs/ntfs3: Fix transform resident to nonresident for compressed files")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5118072e228e7e4385fc5ac46b2e31cf6c4f2d3 ]
Broadcom switches supported by the b53 driver use a chip-wide jumbo frame
configuration. In the commit referenced with the Fixes tag, the setting
is applied just for the last port changing its MTU.
While configuring CPU ports accounts for tagger overhead, user ports do
not. When setting the MTU for a user port, the chip-wide setting is
reduced to not include the tagger overhead, resulting in an potentially
insufficient chip-wide maximum frame size for the CPU port.
As, by design, the CPU port MTU is adjusted for any user port change,
apply the chip-wide setting only for CPU ports. This aligns the driver
to the behavior of other switch drivers.
Fixes: 6ae5834b98 ("net: dsa: b53: add MTU configuration support")
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Willi <martin@strongswan.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66b6095c264e1b4e0a441c6329861806504e06c6 ]
Marvell chips not supporting per-port jumbo frame size configurations use
a chip-wide frame size configuration. In the commit referenced with the
Fixes tag, the setting is applied just for the last port changing its MTU.
While configuring CPU ports accounts for tagger overhead, user ports do
not. When setting the MTU for a user port, the chip-wide setting is
reduced to not include the tagger overhead, resulting in an potentially
insufficient maximum frame size for the CPU port. Specifically, sending
full-size frames from the CPU port on a MV88E6097 having a user port MTU
of 1500 bytes results in dropped frames.
As, by design, the CPU port MTU is adjusted for any user port change,
apply the chip-wide setting only for CPU ports.
Fixes: 1baf0fac10 ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU")
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Willi <martin@strongswan.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f036e68212c11e5a7edbb59b5e25299341829485 ]
The TOS value that is returned to user space in the route get reply is
the one with which the lookup was performed ('fl4->flowi4_tos'). This is
fine when the matched route is configured with a TOS as it would not
match if its TOS value did not match the one with which the lookup was
performed.
However, matching on TOS is only performed when the route's TOS is not
zero. It is therefore possible to have the kernel incorrectly return a
non-zero TOS:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get fibmatch 192.0.2.2 tos 0xfc
192.0.2.0/24 tos 0x1c dev dummy1 proto kernel scope link src 192.0.2.1
Fix by instead returning the DSCP field from the FIB result structure
which was populated during the route lookup.
Output after the patch:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get fibmatch 192.0.2.2 tos 0xfc
192.0.2.0/24 dev dummy1 proto kernel scope link src 192.0.2.1
Extend the existing selftests to not only verify that the correct route
is returned, but that it is also returned with correct "tos" value (or
without it).
Fixes: b61798130f ("net: ipv4: RTM_GETROUTE: return matched fib result when requested")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 338bb57e4c2a1c2c6fc92f9c0bd35be7587adca7 ]
The TOS value that is returned to user space in the route get reply is
the one with which the lookup was performed ('fl4->flowi4_tos'). This is
fine when the matched route is configured with a TOS as it would not
match if its TOS value did not match the one with which the lookup was
performed.
However, matching on TOS is only performed when the route's TOS is not
zero. It is therefore possible to have the kernel incorrectly return a
non-zero TOS:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get 192.0.2.2 tos 0xfc
192.0.2.2 tos 0x1c dev dummy1 src 192.0.2.1 uid 0
cache
Fix by adding a DSCP field to the FIB result structure (inside an
existing 4 bytes hole), populating it in the route lookup and using it
when filling the route get reply.
Output after the patch:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get 192.0.2.2 tos 0xfc
192.0.2.2 dev dummy1 src 192.0.2.1 uid 0
cache
Fixes: 1a00fee4ff ("ipv4: Remove rt_key_{src,dst,tos} from struct rtable.")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 791a615b7ad2258c560f91852be54b0480837c93 ]
The initial buffer has to be inited to all-ones, but it must restrict
it to the size of the first field, not the total field size.
After each round in the map search step, the result and the fill map
are swapped, so if we have a set where f->bsize of the first element
is smaller than m->bsize_max, those one-bits are leaked into future
rounds result map.
This makes pipapo find an incorrect matching results for sets where
first field size is not the largest.
Followup patch adds a test case to nft_concat_range.sh selftest script.
Thanks to Stefano Brivio for pointing out that we need to zero out
the remainder explicitly, only correcting memset() argument isn't enough.
Fixes: 3c4287f620 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reported-by: Yi Chen <yiche@redhat.com>
Cc: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f04df573faf90bb828a2241b650598c02c074323 ]
Those get called from packet path, content must not be modified.
No functional changes intended.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Stable-dep-of: 791a615b7ad2 ("netfilter: nf_set_pipapo: fix initial map fill")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 782161895eb4ac45cf7cfa8db375bd4766cb8299 ]
Delete expectation path is missing a call to the nf_expect_get_id()
helper function to calculate the expectation ID, otherwise LSB of the
expectation object address is leaked to userspace.
Fixes: 3c79107631 ("netfilter: ctnetlink: don't use conntrack/expect object addresses as id")
Reported-by: zdi-disclosures@trendmicro.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95b087f87b780daafad1dbb2c84e81b729d5d33f ]
When map a device between servers with MLX and BCM RoCE nics, RTRS
server complain about unknown imm type, and can't map the device,
After more debug, it seems bnxt_re wrongly handle the
imm_data, this patch fixed the compat issue with MLX for us.
In off list discussion, Selvin confirmed HW is working in little endian format
and all data needs to be converted to LE while providing.
This patch fix the endianness for imm_data
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20240710122102.37569-1-jinpu.wang@ionos.com
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb5f50a43d ]
For the case that VT-d page is smaller than mm page, converting dma pfn
should be handled in two cases which are for start pfn and for end pfn.
Currently the calculation of end dma pfn is incorrect and the result is
less than real page frame number which is causing the mapping of iova
always misses some page frames.
Rename the mm_to_dma_pfn() to mm_to_dma_pfn_start() and add a new helper
for converting end dma pfn named mm_to_dma_pfn_end().
Signed-off-by: Yanfei Xu <yanfei.xu@intel.com>
Link: https://lore.kernel.org/r/20230625082046.979742-1-yanfei.xu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: 31000732d56b ("iommu/vt-d: Fix identity map bounds in si_domain_init()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd748e177194ebcbbaf98df75152a30e08230cc6 ]
The of_device_unregister call in therm_windtunnel's module_exit procedure
does not fully reverse the effects of of_platform_device_create in the
module_init prodedure. Once you unload this module, it is impossible
to load it ever again since only the first of_platform_device_create
call on the fan node succeeds.
This driver predates first git commit, and it turns out back then
of_platform_device_create worked differently than it does today.
So this is actually an old regression.
The appropriate function to undo of_platform_device_create now appears
to be of_platform_device_destroy, and switching to use this makes it
possible to unload and load the module as expected.
Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Fixes: c6e126de43 ("of: Keep track of populated platform devices")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240711035428.16696-1-nbowler@draconx.ca
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14196e47c5ffe32af7ed5a51c9e421c5ea5bccce ]
In the xmon disassembly code there are several CPU feature checks to
determine what dialects should be passed to the disassembler. The
dialect controls which instructions the disassembler will recognise.
Unfortunately the checks are incorrect, because instead of passing a
single CPU feature they are passing a mask of feature bits.
For example the code:
if (cpu_has_feature(CPU_FTRS_POWER5))
dialect |= PPC_OPCODE_POWER5;
Is trying to check if the system is running on a Power5 CPU. But
CPU_FTRS_POWER5 is a mask of *all* the feature bits that are enabled on
a Power5.
In practice the test will always return true for any 64-bit CPU, because
at least one bit in the mask will be present in the CPU_FTRS_ALWAYS
mask.
Similarly for all the other checks against CPU_FTRS_xx masks.
Rather than trying to match the disassembly behaviour exactly to the
current CPU, just differentiate between 32-bit and 64-bit, and Altivec,
VSX and HTM.
That will cause some instructions to be shown in disassembly even
on a CPU that doesn't support them, but that's OK, objdump -d output
has the same behaviour, and if anything it's less confusing than some
instructions not being disassembled.
Fixes: 897f112bb4 ("[POWERPC] Import updated version of ppc disassembly code for xmon")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240509121248.270878-2-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2a57ee0f2f1ad8c970ff58b78a43e85abbdeb7f ]
When PERST# assert and deassert happens on the PERST# supported platforms,
both iATU0 and iATU6 will map inbound window to BAR0. DMA will access the
area that was previously allocated (iATU0) for BAR0, instead of the new
area (iATU6) for BAR0.
Right now, this isn't an issue because both iATU0 and iATU6 should
translate inbound accesses to BAR0 to the same allocated memory area.
However, having two separate inbound mappings for the same BAR is a
disaster waiting to happen.
The mappings between PCI BAR and iATU inbound window are maintained in the
dw_pcie_ep::bar_to_atu[] array. While allocating a new inbound iATU map for
a BAR, dw_pcie_ep_inbound_atu() API checks for the availability of the
existing mapping in the array and if it is not found (i.e., value in the
array indexed by the BAR is found to be 0), it allocates a new map value
using find_first_zero_bit().
The issue is the existing logic failed to consider the fact that the map
value '0' is a valid value for BAR0, so find_first_zero_bit() will return
'0' as the map value for BAR0 (note that it returns the first zero bit
position).
Due to this, when PERST# assert + deassert happens on the PERST# supported
platforms, the inbound window allocation restarts from BAR0 and the
existing logic to find the BAR mapping will return '6' for BAR0 instead of
'0' due to the fact that it considers '0' as an invalid map value.
Fix this issue by always incrementing the map value before assigning to
bar_to_atu[] array and then decrementing it while fetching. This will make
sure that the map value '0' always represents the invalid mapping."
Fixes: 4284c88fff ("PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address")
Closes: https://lore.kernel.org/linux-pci/ZXsRp+Lzg3x%2Fnhk3@x1-carbon/
Link: https://lore.kernel.org/linux-pci/20240412160841.925927-1-Frank.Li@nxp.com
Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Tested-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 912315715d7b74f7abdb6f063ebace44ee288af9 ]
All EP specific resources are enabled during PERST# deassert. As a counter
operation, all resources should be disabled during PERST# assert. There is
no point in skipping that if the link was not enabled.
This will also result in enablement of the resources twice if PERST# got
deasserted again. So remove the check from qcom_pcie_perst_assert() and
disable all the resources unconditionally.
Fixes: f55fee56a6 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver")
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-1-22832d0d456f@linaro.org
Tested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
