PD#SWPL-2600
Problem:
osd display half menu when in 1080i
Solution:
osd: adjust free_scale_dst if interlaced
Verify:
verify by p212
Change-Id: Ie9faffbb5942faa317b380ca0cdbee072a30c01f
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-2580
Problem:
The vd1 postblend bit in vpp misc is overwriten.
Solution:
add more check for vd1 postblend bit in vsync
Verify:
verify by p212
Change-Id: I367e920c13764af41446d7d759aaf8388fb08722
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-2580
Problem:
The vd1 postblend bit in vpp misc is overwriten.
Solution:
osd: call osd_update_enable if needed
Verify:
verify by p212
Change-Id: I438848dc843ea370d65dc3c6b4befb32d1f2b5f8
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
PD#SWPL-2558
Problem:
a black horizontal line below the screen when play video
Solution:
set dummy data alpha
Verify:
verified on p321
Change-Id: I36dc924b9bc89f4f8ea61eb86c6f5bc9199e40ae
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#172587
Problem:
afbc now support on chip txlx and g12a,
but we use cpu_after_eq(G12A) to judge
if afbc is support or not.
Solution:
use is_meson_g12a_cpu() replace cpu_after_eq(G12A).
Verify:
u200(g12a),t962x_r311
Change-Id: I3fb7ed54f7137fada97481177e40a2543cf8df9f
Signed-off-by: huaihao guo <huaihao.guo@amlogic.com>
PD#SWPL-714
Problem:
The last few seconds of the DD+ stream are not smooth by DTV playback.
Solution:
check the apts and vpts both discontinue,then replay the stream.
Verify:
P321
Change-Id: I6cbbdecc052dfe9fef76b44f36545b231332ee12
Signed-off-by: Yinming Ding <yinming.ding@amlogic.com>
PD#SWPL-2565
Problem:
The splash screen problem for first frame after starting up.
Solution:
Modify the value of register afbc_gclk_ctrl.
Verify:
u211
Change-Id: Ie1ddfade0566ff8cd571c43ba8490a8c277a8758
Signed-off-by: Peng Yixin <yixin.peng@amlogic.com>
PD#SWPL-1207
Problem:
fix the filckered problem when playing transition
video in sdr tv
Solution:
when dv core2 don't run, the reset can't be executed
Verify:
r321
Change-Id: I719325f1722589e02a40d46442258b0d1e3feb17
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-2302
Problem:
Play online video,half an hour later, the TV shows
a pink screen and the sound is normal.
Solution:
Check hdcp1.4 status and disable encryption when fail.
Verify:
S922X
Change-Id: I6ce51824726b267d140750f9e9d80aa8bb921cac
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
PD#172587
Problem:
the line check always return low.
the print of check too much.
Solution:
modify the cec gpio from 7 to 10.
modify the check line.
Verify:
tl1 x301 board
Change-Id: I09ae5eee455d83e51e65957cd293e07da1c0046a
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
PD#SWPL-2539
Problem:
defendkey_reserved have influenced on display
during the system boot up
Solution:
adjust defendkey_reserved node location
Verify:
GXL/TXL skt board verify pass
Change-Id: I5cf0245f9653e20224c4e3bab1f6f05527011210
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#SWPL-2287
Problem:
set wakeup reason to stick mem
Solution:
set wakeup reason to stick mem
Verify:
gxl,test pass
Change-Id: Iff6f1824ea4ac9ec12b8295d4283992fdac03b14
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
PD#SWPL-2100
Problem:
GXL need to support secure upgrade check
Solution:
1.add dtb decrypt support
2.add 32bit defendkey support
Verify:
GXL skt board verify pass
Change-Id: I501967530b2a61d9b90c20241b82f92b00829453
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#SWPL-2100
Problem:
GXL need to support secure upgrade check
Solution:
add defendkey support in all GXL dts
Verify:
GXL skt board verify pass
Change-Id: I73b84b86f23f512ddc556b61f3a07d015c717e8c
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#SWPL-1804
Problem:
osd color error when osd hdr enabled
Solution:
div alpha when osd hdr enabled
Verify:
verified on u212 dev board
Change-Id: I1f5ea0db404d1956f454bd5da2532bded89626ee
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
PD#SWPL-1804
Problem:
fix osd color matrix when dv enabled
Solution:
enable osd matrix when dv enabled
Verify:
verified on u212 dev board
Change-Id: I4b4206f4d8c447873f23a3a0066af0d0fa85e18c
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-2497
Problem:
on 32bit kernel, when user space call WAITFORVSYNC,
we cannot send other command to framebuffer.
Solution:
remove lock in fbioctl as fb compat_ioctl do.
Our driver have locks to protect internal resources.
Verify:
verified on franklin.
Change-Id: I1789c09a7ea459aed4b782748847687c7f974526
Signed-off-by: sky zhou <sky.zhou@amlogic.com>
PD#SWPL-215
Problem:
1. additional or missing bytes be sent on mosi sometimes.
2. Customer DSP load firmware through SPICC. the loading time is 12s with
buildroot release 20180907 while 6s with 20180131.
3. rx error when work in loopback mode at high speed.
Solution:
1. change to disable irq at the irq-handle begining;
change to enable irq after all data pulled.
2. pre-setup of every spi transfer spends most of time on clk_set_rate().
this time is not obvious while cpu work at a high frequence such as
1000MHz.
In fact, a slave speed is almost fixed and we needn't set it for every
transfer but set only when speed changed.
3. disable auto io delay when in loopback mode.
Verify:
verified on axg-s400-v03 and tl1-skt
Change-Id: I61bcceccc243b218879b2b0711d0aff7538151f6
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
PD#SWPL-2351
Problem:
atv/dtv no signal when suspend after switch from hdmi
Solution:
disable vdac bandgap when suspend
Verify:
test pass on P321
Change-Id: I0449f0d9673f46928b8951249f5759a4a1f16562
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
PD#165764
Problem:
have a warning of the "ram" variable cast.
Solution:
add a "void *" to the ram variable.
Verify:
test locally.
Change-Id: I037a89a28e98ae8c8ab965e908877bf4a72d3ead
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
PD#SWPL-1158
Problem:
The video will become un-smooth after change
between several audio languages
Solution:
when apts and vpts distance is large then 60*90000
then set the tsync mode to vmaster and set the tysnc
enable to 0
Verify:
P321
Change-Id: I7c7e32f49ca12645cf6a1aa58caeb968a9234c8c
Signed-off-by: live.li <live.li@amlogic.com>
PD#165764
Problem:
ramdump is not enabled on ARM32
Solution:
Enable it and fix compatible with ARM64
Verify:
R311
Change-Id: I337ef019ecab05d25b7d9dc0cacab7a03149aa7b
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
PD#SWPL-2170
Problem:
cts fail
android.hardware.consumerir.cts.ConsumerIrTest#test_timing
Solution:
add synchronous transmit
when it returns the pattern has been transmitted
Verify:
verify on franklin
Change-Id: I7e490236e5effc13f81e4fab3a1c7fc10c5dcfb3
Signed-off-by: Wencai You <wencai.you@amlogic.com>
PD#174867
Problem:
vrtc time update for stick mem.
Solution:
vrtc time update for stick mem.
Verify:
g12a txl.
Change-Id: I65074422569370b253882a4e66fb771da10ccdbf
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
PD#SWPL-1978
Problem:
bring up board r314.
Solution:
increase board dts file
feature:
The Dts file with Einstein is identical except for the memory difference
R314 1.5G, Einstein 1G.
Verify:
Verified on txlx_t962x_r314 board.
Change-Id: I271cb92a9cbcab174fb0bb76cfbc8beff9c730d3
Signed-off-by: guotai.shen <guotai.shen@amlogic.com>
PD#SWPL-2250
Problem:
h265 & vp9 4K playback abnormal because HEVC FRONT &
VPU READ2 pollute the phy address of near 0x0.
Solution:
it's only a temporary modification, the real reason
needs to take more time fixed.
Verify:
U212
Change-Id: I3dcc47f8979960e95c89cf53fe10eadc1a7ae5ad
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#SWPL-1689
Problem:
The thread still exists when the process exits
Solution:
Check if the thread exits when the process exits
Verify:
local
Change-Id: I6d805da6bfa0df85b6d39d065c95eed49b3cb7da
Signed-off-by: Renjiang Han <renjiang.han@amlogic.com>
PD#SWPL-1937
Problem:
secure discard and trim may cost 5mins on toshiba
"004GA0" emmc.
Solution:
using normal discard operation instead.
Verify:
W400
Change-Id: I7fd23867f8ae0af9192377de8f8c15609ef809ed
Signed-off-by: Yonghui Yu <yonghui.yu@amlogic.com>
PD#173820
Problem:
kasan bug in di_task_handle
Solution:
delete cma_mutex because it has no effect
Verify:
P321
Change-Id: Ie6ca7973576e7350870c5466b54b38b490dff65e
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#172256
Problem:
On G12A/G12B, bit for ddr0 protection 0 vilation is not same
Solution:
Fix bit missmatch problem
Verify:
U212
Change-Id: I5dca14c8bc96bdcb85dbe8bbd5a9a18157834bcf
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
PD#SWPL-1603
Problem:
don't support old spi driver now
Solution:
update new spi driver api for ldim driver
Verify:
txlx r311
Change-Id: I4dff13e4cab5666a30488730e27c6275b933a922
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#SWPL-1513
Problem:
ab update can not work on P
Solution:
add dtsi for ab update for P
Verify:
test pass in ampere
Change-Id: I6ff219170a16c0081fba7297110e8dfaadcff401
Signed-off-by: Xindong Xu <xindong.xu@amlogic.com>
PD#SWPL-2286
Problem:
emmc response crc error in emmc init.
Solution:
clean emmc reg val from uboot to kernel.
Verify:
w400
Change-Id: I6a4763187f18e9e284c887c5c788f3a88c8548ff
Signed-off-by: Nan Li <nan.li@amlogic.com>
PD#172865
Problem:
Customer requests a new release for linux dvb
Need enable dvb for QA testing
Solution:
Need enable dvb for QA testing
Verify:
Change-Id: Ib082c457d6f43ef4d6a5d16059a7e8ce068a332e
Signed-off-by: yeping.miao <yeping.miao@amlogic.com>
