PD#SWPL-6608
Problem:
system will report tx error somethime after resume
Solution:
reset ethernet when resume
Verify:
verify on u200 board
Change-Id: I9863a8a50c08addd4e2d8c024f46a2e7568c28b4
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
PD#SWPL-5295
Problem:
add RX delay for 8211f and add led setup interface
Solution:
tuning delay and leds
Verify:
verify on u200 board
Change-Id: I45e855894d570fdd976f90fd8f03151ad52a3683
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
a9eb626 dtv_demod: Prevent NULL pointer crash caused by tuner attach failure [1/1]
d27b145 dtv_demod: TL1 dtmb suspend hangup issue [1/1]
27c05dd dtv_demod: tl1,dvbc, new method for fast channel searching [1/1]
fa80091 dtv_demod: txlx atsc-t loses lock when play video for a long time [1/1]
43db0c5 build: fix build err [1/1]
d4abd67 dtv_demod: TXLX ISDB-T can't search channel [1/1]
70f2c39 dtv_demod: TL1 dvbc search time more than 3 min [1/1]
16d4727 dtv_demod: TL1 dtmb cma allocate fail after dtmb->dvbc->dtmb by cmd [1/1]
b5aa9de media_module: h264/mpeg2/h265 [2/2]
3d6a5ed ppmgr: use light reg for video decoder local reset [1/1]
ppmgr: use light reg for video decoder local reset [1/1]
PD#SWPL-5014
Problem:
ppmgr provider error sometimes in long time run under poor signal
Solution:
use light reg for video decoder local reset
Verify:
X301
Change-Id: I1500c9ddfdce76b3e9cb2b24a35cdee765f82d5f
Signed-off-by: Hui Zhang <hui.zhang@amlogic.com>
media_module: h264/mpeg2/h265 [2/2]
PD#SWPL-3654
Problem:
provide aspect_ratio information by AMSTREAM_IOC_VDECSTAT
Solution:
add ration_control information in vdec_status function for
h264/mh264/vh265/mpeg12/mmpeg12, and normalized it for
aspect_ratio in AMSTREAM_IOC_VDECSTAT message.
Verify:
Verified U212
Change-Id: Icd9270eb8f2ce2f6f7455ec28780d26ac6c56348
Signed-off-by: Rong Zhang <rong.zhang@amlogic.com>
dtv_demod: TL1 dtmb cma allocate fail after dtmb->dvbc->dtmb by cmd [1/1]
PD#TV-1748
Problem:
[Hisense-T962X2-P-customer-DTV]:Failed to lock frequency in dtmb system
Solution:
leave the last mode before enter current mode to release the resources
Verify:
verified by t962x2_x301
Change-Id: Ibd7e1d4c67f5a5ad2191e0031fdd0b81812c8606
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
dtv_demod: TL1 dvbc search time more than 3 min [1/1]
PD#SWPL-3555
Problem:
{DVB-C}Hisense needs less than 3 minutes for dvb-c search.(5/5，None)
Solution:
1.use demod internal state machine to optimize time
2.remove j.83b filter setting in dvbc mode for tl1 & txlx
Verify:
verified by t962x2_x301&t962x_r311
Change-Id: Ic922e3da727179e2e35a0fc80e52ac7242c54129
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
dtv_demod: TXLX ISDB-T can't search channel [1/1]
PD#SWPL-3987
Problem:
[Einstein]use ISDB-T cannot search any channel
Solution:
release cma memory at leave_mode for ISDB-t&DVB-T
Verify:
verified by t962x_r311
Change-Id: I9b79687a4d5270932ab30afaa3e7d2817e900149
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
build: fix build err [1/1]
PD#SWPL-4150
Problem:
When switch to the toolchain shipped with android P, multipile
"-Werror=maybe-uninitialized" error occurs, and the code fail
to be compiled
Solution:
Initialize variables if necessary
Verify:
Locally on Ampere
Change-Id: I280de648914565656831e211539bf41a7dee2b4a
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
dtv_demod: txlx atsc-t loses lock when play video for a long time [1/1]
PD#SWPL-3418
Problem:
[Einstein]when AC off/on,enter live TV ,
TV display blank screen and no signal about 5S
Solution:
use post-eq to track(0x912=0x50)
Verify:
verified by t962x_r311
Change-Id: I924c55a8f1c92328e4371cb730e1b03bd720457f
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
dtv_demod: tl1,dvbc, new method for fast channel searching [1/1]
PD#TV-2154
Problem:
[Hisense-T962X2-P-customer-DTV]:DVBC QAM is set to auto to search channels
Solution:
add new searching method
note:
use "demod_dvbc_speedup_en" to mark the new method
it's disabled as default, can be enabled if needed
we can make it always enabled after all testing are passed
enable: echo fast_search on > /sys/kernel/debug/demod/dvbc_channel_fast
Verify:
verified by t962x2_x301
Change-Id: Icaaab9f27eb058a062d7048c6ca9fa2e3bff008e
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
dtv_demod: TL1 dtmb suspend hangup issue [1/1]
PD#SWPL-5202
Problem:
cma memory is not released when suspend
Solution:
provide suspend interface to release cma memory
Verify:
verified by t962x2_x301
Change-Id: I1d808a8a6119a2f385961c4c5bded5ab71c9c9d1
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
dtv_demod: Prevent NULL pointer crash caused by tuner attach failure [1/1]
PD#TV-1539
Problem:
Prevent NULL pointer crash caused by tuner attach failure.
Solution:
Prevent NULL pointer crash caused by tuner attach failure.
Verify:
verified by x301
Change-Id: I57cf32947775626467eb952dd2298ae9ec84601d
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
dtv_demod: add AGC control for board t309 [1/1]
PD#SWPL-5175
Problem:
r842 agc control need be controlled by demod
Solution:
add agc control function
Verify:
verified by t962x2_x301 t962x2_t309
Change-Id: If712e22276b97c457e2e2ed1c79bdf3673813dff
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
PD#SWPL-5664
Problem:
for netflix 23.97fps non-tunnle playback 3:2 patten broken so many times
Solution:
reuse initial phase that Tim use in amazon
Verify:
verify by u212
Change-Id: I5d988e1c3a3dbf1bb728f55a921e8b8fb6990985
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-5664
Problem:
pcr not paused when netflix video non-tunnel mode pause
Solution:
do not compensation when diff between omxpts and pcr too large
Because when paused, continous compensation will lead diff
beween omxpts and pcr will alway inside pcr adjust threshold,
and pcr not set again, then pcr will increase
Verify:
verify by nts
Change-Id: Ib2acea35758d161d1e9db53dd6ff369ba7973351
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-5664
Problem:
pcr is probably adjust when test AL1 eyepatch test case
Solution:
the time is not accurate when check pcr and omx_pts differ, because
omx_pts is used the value that be set, but pcr is current. Here add
compensation for omx_pts
Verify:
verify by nts
Change-Id: I3e0f6f006fd79cf7cac4148fd18da72111a333c7
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-7656
Problem:
crash when there is cpu boot fail in hmp
Solution:
fix crash when there is cpu boot fail in hmp
Verify:
W400
Change-Id: I0153975593adb0bfcbc3c3bd6543f0fb2e6bf2e0
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
PD#SWPL-7181
Problem:
switch to high-speed from hs200 failed for resume process.
Solution:
set tx_delay as 0 for legacy mode.
clear cfg_cmd_setup
Verify:
verify by TL1
Change-Id: I5dbb1bbc391da864464bf137837a2b0f54ccda42
Signed-off-by: Long Yu <long.yu@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-7765
Problem:
g12b revb efuse not correct
Solution:
set tx_amp with chipid to work around
Verify:
verify on g12b skt board
Change-Id: Id1babce231d866293e4de52685834834a4b65227
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
PD#SWPL-6937
Problem:
1.get lefttime error by 'cat sys/class/watchdog/watchdog0/timeleft' cmd.
2.if DTS is configured to feed watchdog by Android, the system will
restart automatically after wake up.
Solution:
1.modify the code to get time.
2.when the system wakes up, first judge whether the watchdog runs,
and then decide whether to start the watchdog.
Verify:
test pass on u200
Change-Id: If64888ffdd5651e8cfcace5ea0d0da31641bb397
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
PD#SWPL-5475
Problem:
need to add interface of HDR Prime SL driver
Solution:
add interface of HDR Prime SL driver
Verify:
U212
Change-Id: If0e62b74ccbaa4ede490e7a9896d9f5915480d6f
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#OTT-2524
Problem:
enable sdr2hdr function, uboot logo have color change
Solution:
match uboot sdr2hdr function
Verify:
verify on G12A
Change-Id: I160cd6141d09a385d299ca96a89eb1ebf09c86e8
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
PD#SWPL-6969
Problem:
For some historical reason, aml-uart is configured as the earlycon
name in uboot, which is not recognized by 4.9 kernel
Solution:
support aml-uart as the name for earlycon
Verify:
Ampere
Change-Id: I01427f2d512c0bf1972dd545dc71570919c5bc07
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#OTT-3244
Problem:
When vd layer state is on_pending, calling enable videolayer
function will overwrite the state. Then it will not enable video
layer really.
Solution:
Add the judgement to check if the state is on_pending.
Verify:
verified on W400
Change-Id: I0513a6610fdb108bec05858c7f6c7976be5e7edb
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-7302
Problem:
sm1 green screen when play videos
Solution:
add chip support
Verify:
s905D3
Change-Id: I50c0a9f889d72b65157a973bfe1df8dce10db64a
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
PD#SWPL-5430
Problem:
new function lane 6 and lane 8
Solution:
support max 16 channel playback
Verify:
sm1_ac200, verify pass
Change-Id: I3af42a0b68bca8804afa042ad4a506a379b9bf86
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/tdm.c
PD#SWPL-5495
Problem:
There is some improvement code on RSR
project, we need to merge them back to
trunk.
Solution:
Merge the code from rsr branch
Verify:
A113
Change-Id: I0ba11c8ff412db659ff2f10bfc00d63c49f84bb5
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/tdm.c
PD#SWPL-3365
Problem:
not resample for audio in, so output in wrong sample rate
Solution:
1. enable resample in dts
2. fix to check whether resample is needed
Verify:
x301
Change-Id: I99238cc21a00ab53df6a1f8ab1703bc9ab48cbaa
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/ddr_mngr.c
sound/soc/amlogic/auge/resample.c
sound/soc/amlogic/auge/spdif.c
PD#SWPL-2645
Problem:
play ddp source, then play pcm source, no sound
Solution:
1. fix same source control and channel map issue
2. i2s 8ch, spdif 2ch, channels are not mapped, make spdif 8 channel mask
3. when same source used, keep mpll use same mpll
Verify:
x301
Change-Id: I2fe4bbcbcbfff0a1c1a6cebf61d1da5aba9b7a9d
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/tl1_t962x2_t309.dts
arch/arm/boot/dts/amlogic/tl1_t962x2_x301.dts
arch/arm64/boot/dts/amlogic/tm2_t962e2_ab311.dts
arch/arm64/boot/dts/amlogic/tm2_t962x3_ab301.dts
sound/soc/amlogic/auge/ddr_mngr.c
sound/soc/amlogic/auge/sharebuffer.c
sound/soc/amlogic/auge/spdif_hw.c
sound/soc/amlogic/auge/spdif_hw.h
PD#SWPL-5837
Problem:
dtv is out of avsync when dolby ms12 certificate
Solution:
when the audio is played, recalculate the apts to sync
pcrsrc when pcrmaster.
Verify:
X301
Change-Id: I199383aa1c0de1b4f0ec646d9d066910b3bb2b42
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
PD#TV-4638
Problem:
Speaker output high frequency howling
after change from pattern 615 to pattern 1 on chroma22294.
The hw resampler keeps sending noise if it has no input.
Solution:
Enable the hw resample pause thd by default.
Verify:
TL1 X301.
Change-Id: Ib6f0924025e155eaa8ba0e3681b307f7ff56b449
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#TV-4638
Problem:
Speaker output high frequency howling
after change from pattern 615 to pattern 1 on chroma22294.
The hw resampler keeps sending noise if it has no input.
Solution:
Enable the hw resample pause thd by default.
Verify:
TL1 X301.
Change-Id: I076d1b80c6482661fdc3fd5808f1cc231666d07e
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-7039
Problem:
Kernel Panic when resample A is disabled
Solution:
When resample is disabled，don't init resample
Verify:
Verified on T962e2_ab311
Change-Id: Id9552ffc6be40f133b828dbded4ad3f15d177ab0
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
