commit 9f070b1862f3411b8bcdfd51a8eaad25286f9deb upstream.
The v4l2_detect_cvt/gtf functions should check the result against the
timing capabilities: these functions calculate the timings, so if they
are out of bounds, they should be rejected.
To do this, add the struct v4l2_dv_timings_cap as argument to those
functions.
This required updates to the adv7604 and adv7842 drivers since the
prototype of these functions has now changed. The timings struct
that is passed to v4l2_detect_cvt/gtf in those two drivers is filled
with the timings detected by the hardware.
The vivid driver was also updated, but an additional check was added:
the width and height specified by VIDIOC_S_DV_TIMINGS has to match the
calculated result, otherwise something went wrong. Note that vivid
*emulates* hardware, so all the values passed to the v4l2_detect_cvt/gtf
functions came from the timings struct that was filled by userspace
and passed on to the driver via VIDIOC_S_DV_TIMINGS. So these fields
can contain random data. Both the constraints check via
struct v4l2_dv_timings_cap and the additional width/height check
ensure that the resulting timings are sane and not messed up by the
v4l2_detect_cvt/gtf calculations.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Fixes: 2576415846 ("[media] v4l2: move dv-timings related code to v4l2-dv-timings.c")
Cc: stable@vger.kernel.org
Reported-by: syzbot+a828133770f62293563e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-media/000000000000013050062127830a@google.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca59f9956d4519ab18ab2270be47c6b8c6ced091 upstream.
Atomicity violation occurs when the fmc_send_cmd() function is executed
simultaneously with the modification of the fmdev->resp_skb value.
Consider a scenario where, after passing the validity check within the
function, a non-null fmdev->resp_skb variable is assigned a null value.
This results in an invalid fmdev->resp_skb variable passing the validity
check. As seen in the later part of the function, skb = fmdev->resp_skb;
when the invalid fmdev->resp_skb passes the check, a null pointer
dereference error may occur at line 478, evt_hdr = (void *)skb->data;
To address this issue, it is recommended to include the validity check of
fmdev->resp_skb within the locked section of the function. This
modification ensures that the value of fmdev->resp_skb does not change
during the validation process, thereby maintaining its validity.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations.
Fixes: e8454ff7b9 ("[media] drivers:media:radio: wl128x: FM Driver Common sources")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49a397ad24ee5e2c53a59dada2780d7e71bd3f77 upstream.
The tilt data contained in the Bluetooth packets of an Intuos Pro are
supposed to be interpreted as signed values. Simply casting the values
to type `char` is not guaranteed to work since it is implementation-
defined whether it is signed or unsigned. At least one user has noticed
the data being reported incorrectly on their system. To ensure that the
data is interpreted properly, we specifically cast to `signed char`
instead.
Link: https://github.com/linuxwacom/input-wacom/issues/445
Fixes: 4922cd26f0 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
CC: stable@vger.kernel.org # 4.11+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96a9fe64bfd486ebeeacf1e6011801ffe89dae18 upstream.
Supposing first scenario with a virtio_blk driver.
CPU0 CPU1
blk_mq_try_issue_directly()
__blk_mq_issue_directly()
q->mq_ops->queue_rq()
virtio_queue_rq()
blk_mq_stop_hw_queue()
virtblk_done()
blk_mq_request_bypass_insert() 1) store
blk_mq_start_stopped_hw_queue()
clear_bit(BLK_MQ_S_STOPPED) 3) store
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending()) 4) load
return
blk_mq_sched_dispatch_requests()
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending())
return
blk_mq_sched_dispatch_requests()
if (blk_mq_hctx_stopped()) 2) load
return
__blk_mq_sched_dispatch_requests()
Supposing another scenario.
CPU0 CPU1
blk_mq_requeue_work()
blk_mq_insert_request() 1) store
virtblk_done()
blk_mq_start_stopped_hw_queue()
blk_mq_run_hw_queues() clear_bit(BLK_MQ_S_STOPPED) 3) store
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending()) 4) load
return
blk_mq_sched_dispatch_requests()
if (blk_mq_hctx_stopped()) 2) load
continue
blk_mq_run_hw_queue()
Both scenarios are similar, the full memory barrier should be inserted
between 1) and 2), as well as between 3) and 4) to make sure that either
CPU0 sees BLK_MQ_S_STOPPED is cleared or CPU1 sees dispatch list.
Otherwise, either CPU will not rerun the hardware queue causing
starvation of the request.
The easy way to fix it is to add the essential full memory barrier into
helper of blk_mq_hctx_stopped(). In order to not affect the fast path
(hardware queue is not stopped most of the time), we only insert the
barrier into the slow path. Actually, only slow path needs to care about
missing of dispatching the request to the low-level device driver.
Fixes: 320ae51fee ("blk-mq: new multi-queue block IO queueing mechanism")
Cc: stable@vger.kernel.org
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241014092934.53630-4-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67ab51cbdfee02ef07fb9d7d14cc0bf6cb5a5e5c upstream.
Commit 18011eac28 ("arm64: tls: Avoid unconditional zeroing of
tpidrro_el0 for native tasks") tried to optimise the context switching
of tpidrro_el0 by eliding the clearing of the register when switching
to a native task with kpti enabled, on the erroneous assumption that
the kpti trampoline entry code would already have taken care of the
write.
Although the kpti trampoline does zero the register on entry from a
native task, the check in tls_thread_switch() is on the *next* task and
so we can end up leaving a stale, non-zero value in the register if the
previous task was 32-bit.
Drop the broken optimisation and zero tpidrro_el0 unconditionally when
switching to a native 64-bit task.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Fixes: 18011eac28 ("arm64: tls: Avoid unconditional zeroing of tpidrro_el0 for native tasks")
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20241114095332.23391-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d369735e02ef122d19d4c3d093028da0eb400636 upstream.
In ublk_ch_mmap(), queue id is calculated in the following way:
(vma->vm_pgoff << PAGE_SHIFT) / `max_cmd_buf_size`
'max_cmd_buf_size' is equal to
`UBLK_MAX_QUEUE_DEPTH * sizeof(struct ublksrv_io_desc)`
and UBLK_MAX_QUEUE_DEPTH is 4096 and part of UAPI, so 'max_cmd_buf_size'
is always page aligned in 4K page size kernel. However, it isn't true in
64K page size kernel.
Fixes the issue by always rounding up 'max_cmd_buf_size' with PAGE_SIZE.
Cc: stable@vger.kernel.org
Fixes: 71f28f3136 ("ublk_drv: add io_uring based userspace block driver")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241111110718.1394001-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcc7ba668818dcadd2f1db66b39ed860a63ecf97 upstream.
Currently in omap_8250_shutdown, the dma->rx_running flag is
set to zero in omap_8250_rx_dma_flush. Next pm_runtime_get_sync
is called, which is a runtime resume call stack which can
re-set the flag. When the call omap_8250_shutdown returns, the
flag is expected to be UN-SET, but this is not the case. This
is causing issues the next time UART is re-opened and
omap_8250_rx_dma is called. Fix by moving pm_runtime_get_sync
before the omap_8250_rx_dma_flush.
cc: stable@vger.kernel.org
Fixes: 0e31c8d173 ("tty: serial: 8250_omap: add custom DMA-RX callback")
Signed-off-by: Bin Liu <b-liu@ti.com>
[Judith: Add commit message]
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20241031172315.453750-1-jm@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d610020f030bec819f42de327c2bd5437d2766b3 upstream.
During wear-leveing work, the source PEB will be moved into scrub list
when source LEB cannot be locked in ubi_eba_copy_leb(), which is wrong
for non-scrub type source PEB. The problem could bring extra and
ineffective wear-leveing jobs, which makes more or less negative effects
for the life time of flash. Specifically, the process is divided 2 steps:
1. wear_leveling_worker // generate false scrub type PEB
ubi_eba_copy_leb // MOVE_RETRY is returned
leb_write_trylock // trylock failed
scrubbing = 1;
e1 is put into ubi->scrub
2. wear_leveling_worker // schedule false scrub type PEB for wl
scrubbing = 1
e1 = rb_entry(rb_first(&ubi->scrub))
The problem can be reproduced easily by running fsstress on a small
UBIFS partition(<64M, simulated by nandsim) for 5~10mins
(CONFIG_MTD_UBI_FASTMAP=y,CONFIG_MTD_UBI_WL_THRESHOLD=50). Following
message is shown:
ubi0: scrubbed PEB 66 (LEB 0:10), data moved to PEB 165
Since scrub type source PEB has set variable scrubbing as '1', and
variable scrubbing is checked before variable keep, so the problem can
be fixed by setting keep variable as 1 directly if the source LEB cannot
be locked.
Fixes: e801e128b2 ("UBI: fix missing scrub when there is a bit-flip")
CC: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5f05a138a8cac035bf9da9b6ed0e532bc7942c8 upstream.
Due to an apparent copy-paste bug, the parisc implementation of
ftrace_disable_ftrace_graph_caller() doesn't actually do anything.
It enables the (already-enabled) static key rather than disabling it.
The result is that after function graph tracing has been "disabled", any
subsequent (non-graph) function tracing will inadvertently also enable
the slow fgraph return address hijacking.
Fixes: 98f2926171 ("parisc/ftrace: use static key to enable/disable function graph tracer")
Cc: stable@vger.kernel.org # 5.16+
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 172bf5ed04cb6c9e66d58de003938ed5c8756570 upstream.
mtk_cpufreq_get_cpu_power() return 0 if the policy is NULL. Then in
em_create_perf_table(), the later zero check for power is not invalid
as power is uninitialized. As Lukasz suggested, it must return -EINVAL when
the 'policy' is not found. So return -EINVAL to fix it.
Cc: stable@vger.kernel.org
Fixes: 4855e26bcf ("cpufreq: mediatek-hw: Add support for CPUFREQ HW")
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Suggested-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98d1fb94ce75f39febd456d6d3cbbe58b6678795 upstream.
The default dummy cycle for Macronix SPI NOR flash in Octal Output
Read Mode(1-1-8) is 20.
Currently, the dummy buswidth is set according to the address bus width.
In the 1-1-8 mode, this means the dummy buswidth is 1. When converting
dummy cycles to bytes, this results in 20 x 1 / 8 = 2 bytes, causing the
host to read data 4 cycles too early.
Since the protocol data buswidth is always greater than or equal to the
address buswidth. Setting the dummy buswidth to match the data buswidth
increases the likelihood that the dummy cycle-to-byte conversion will be
divisible, preventing the host from reading data prematurely.
Fixes: 0e30f47232 ("mtd: spi-nor: add support for DTR protocol")
Cc: stable@vger.kernel.org
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Link: https://lore.kernel.org/r/20241112075242.174010-2-linchengming884@gmail.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35f56c554eb1b56b77b3cf197a6b00922d49033d upstream.
When tb[IPSET_ATTR_IP_TO] is not present but tb[IPSET_ATTR_CIDR] exists,
the values of ip and ip_to are slightly swapped. Therefore, the range check
for ip should be done later, but this part is missing and it seems that the
vulnerability occurs.
So we should add missing range checks and remove unnecessary range checks.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot+58c872f7790a4d2ac951@syzkaller.appspotmail.com
Fixes: 72205fc68b ("netfilter: ipset: bitmap:ip set type support")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72cef64180de04a7b055b4773c138d78f4ebdb77 upstream.
Setting GPIO direction = high, sometimes results in GPIO value = 0.
If a GPIO is pulled high, the following construction results in the
value being 0 when the desired value is 1:
$ echo "high" > /sys/class/gpio/gpio336/direction
$ cat /sys/class/gpio/gpio336/value
0
Before the GPIO direction is changed from an input to an output,
exar_set_value() is called with value = 1, but since the GPIO is an
input when exar_set_value() is called, _regmap_update_bits() reads a 1
due to an external pull-up. regmap_set_bits() sets force_write =
false, so the value (1) is not written. When the direction is then
changed, the GPIO becomes an output with the value of 0 (the hardware
default).
regmap_write_bits() sets force_write = true, so the value is always
written by exar_set_value() and an external pull-up doesn't affect the
outcome of setting direction = high.
The same can happen when a GPIO is pulled low, but the scenario is a
little more complicated.
$ echo high > /sys/class/gpio/gpio351/direction
$ cat /sys/class/gpio/gpio351/value
1
$ echo in > /sys/class/gpio/gpio351/direction
$ cat /sys/class/gpio/gpio351/value
0
$ echo low > /sys/class/gpio/gpio351/direction
$ cat /sys/class/gpio/gpio351/value
1
Fixes: 36fb7218e8 ("gpio: exar: switch to using regmap")
Co-developed-by: Matthew McClain <mmcclain@noprivs.com>
Signed-off-by: Matthew McClain <mmcclain@noprivs.com>
Signed-off-by: Sai Kumar Cholleti <skmr537@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241105071523.2372032-1-skmr537@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 718632467d88e98816fa01ab12681ef1c2aa56f8 upstream.
This reverts commit 3791ea69a4858b81e0277f695ca40f5aae40f312.
It was reported to cause boot-time issues, so revert it for now.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 3791ea69a485 ("serial: sh-sci: Clean sci_ports[0] after at earlycon exit")
Cc: stable <stable@kernel.org>
Cc: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3791ea69a4858b81e0277f695ca40f5aae40f312 upstream.
The early_console_setup() function initializes the sci_ports[0].port with
an object of type struct uart_port obtained from the object of type
struct earlycon_device received as argument by the early_console_setup().
It may happen that later, when the rest of the serial ports are probed,
the serial port that was used as earlycon (e.g., port A) to be mapped to a
different position in sci_ports[] and the slot 0 to be used by a different
serial port (e.g., port B), as follows:
sci_ports[0] = port A
sci_ports[X] = port B
In this case, the new port mapped at index zero will have associated data
that was used for earlycon.
In case this happens, after Linux boot, any access to the serial port that
maps on sci_ports[0] (port A) will block the serial port that was used as
earlycon (port B).
To fix this, add early_console_exit() that clean the sci_ports[0] at
earlycon exit time.
Fixes: 0b0cced19a ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20241106120118.1719888-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51cdd69d6a857f527d6d0697a2e1f0fa8bca1005 upstream.
This reverts commit ec6ce7075ef879b91a8710829016005dc8170f17.
Fix installation of WinUSB driver using OS descriptors. Without the
fix the drivers are not installed correctly and the property
'DeviceInterfaceGUID' is missing on host side.
The original change was based on the assumption that the interface
number is in the high byte of wValue but it is in the low byte,
instead. Unfortunately, the fix is based on MS documentation which is
also wrong.
The actual USB request for OS descriptors (using USB analyzer) looks
like:
Offset 0 1 2 3 4 5 6 7
0x000 C1 A1 02 00 05 00 0A 00
C1: bmRequestType (device to host, vendor, interface)
A1: nas magic number
0002: wValue (2: nas interface)
0005: wIndex (5: get extended property i.e. nas interface GUID)
008E: wLength (142)
The fix was tested on Windows 10 and Windows 11.
Cc: stable@vger.kernel.org
Fixes: ec6ce7075ef8 ("usb: gadget: composite: fix OS descriptors w_value logic")
Signed-off-by: Michal Vrastil <michal.vrastil@hidglobal.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Acked-by: Peter korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/20241113235433.20244-1-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e19a3b590ebf2e351fc9d0e7c323430e65b6b6d upstream.
The fixed patch introduced an additional condition to enter the scope
where the 'root' device_node is released (!settings->board_type,
currently 'err'), which avoid decrementing the refcount with a call to
of_node_put() if that second condition is not satisfied.
Move the call to of_node_put() to the point where 'root' is no longer
required to avoid leaking the resource if err is not zero.
Cc: stable@vger.kernel.org
Fixes: 7682de8b33 ("wifi: brcmfmac: of: Fetch Apple properties")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241030-brcmfmac-of-cleanup-v1-1-0b90eefb4279@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c1b544563005a00591a3aa86ecff62ed4d11be3 upstream.
Syzkaller reported a hung task with uevent_show() on stack trace. That
specific issue was addressed by another commit [0], but even with that
fix applied (for example, running v6.12-rc5) we face another type of hung
task that comes from the same reproducer [1]. By investigating that, we
could narrow it to the following path:
(a) Syzkaller emulates a Realtek USB WiFi adapter using raw-gadget and
dummy_hcd infrastructure.
(b) During the probe of rtl8192cu, the driver ends-up performing an efuse
read procedure (which is related to EEPROM load IIUC), and here lies the
issue: the function read_efuse() calls read_efuse_byte() many times, as
loop iterations depending on the efuse size (in our example, 512 in total).
This procedure for reading efuse bytes relies in a loop that performs an
I/O read up to *10k* times in case of failures. We measured the time of
the loop inside read_efuse_byte() alone, and in this reproducer (which
involves the dummy_hcd emulation layer), it takes 15 seconds each. As a
consequence, we have the driver stuck in its probe routine for big time,
exposing a stack trace like below if we attempt to reboot the system, for
example:
task:kworker/0:3 state:D stack:0 pid:662 tgid:662 ppid:2 flags:0x00004000
Workqueue: usb_hub_wq hub_event
Call Trace:
__schedule+0xe22/0xeb6
schedule_timeout+0xe7/0x132
__wait_for_common+0xb5/0x12e
usb_start_wait_urb+0xc5/0x1ef
? usb_alloc_urb+0x95/0xa4
usb_control_msg+0xff/0x184
_usbctrl_vendorreq_sync+0xa0/0x161
_usb_read_sync+0xb3/0xc5
read_efuse_byte+0x13c/0x146
read_efuse+0x351/0x5f0
efuse_read_all_map+0x42/0x52
rtl_efuse_shadow_map_update+0x60/0xef
rtl_get_hwinfo+0x5d/0x1c2
rtl92cu_read_eeprom_info+0x10a/0x8d5
? rtl92c_read_chip_version+0x14f/0x17e
rtl_usb_probe+0x323/0x851
usb_probe_interface+0x278/0x34b
really_probe+0x202/0x4a4
__driver_probe_device+0x166/0x1b2
driver_probe_device+0x2f/0xd8
[...]
We propose hereby to drastically reduce the attempts of doing the I/O
reads in case of failures, restricted to USB devices (given that
they're inherently slower than PCIe ones). By retrying up to 10 times
(instead of 10000), we got reponsiveness in the reproducer, while seems
reasonable to believe that there's no sane USB device implementation in
the field requiring this amount of retries at every I/O read in order
to properly work. Based on that assumption, it'd be good to have it
backported to stable but maybe not since driver implementation (the 10k
number comes from day 0), perhaps up to 6.x series makes sense.
[0] Commit 15fffc6a5624 ("driver core: Fix uevent_show() vs driver detach race")
[1] A note about that: this syzkaller report presents multiple reproducers
that differs by the type of emulated USB device. For this specific case,
check the entry from 2024/08/08 06:23 in the list of crashes; the C repro
is available at https://syzkaller.appspot.com/text?tag=ReproC&x=1521fc83980000.
Cc: stable@vger.kernel.org # v6.1+
Reported-by: syzbot+edd9fe0d3a65b14588d5@syzkaller.appspotmail.com
Tested-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241101193412.1390391-1-gpiccoli@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 484c3bab2d5dfa13ff659a51a06e9a393141eefc upstream.
xhci_invalidate_cancelled_tds() may not work correctly if the hardware
is modifying endpoint or stream contexts at the same time by executing
a Set TR Dequeue command. And even if it worked, it would be unable to
queue Set TR Dequeue for the next stream, failing to clear xHC cache.
On stream endpoints, a chain of Set TR Dequeue commands may take some
time to execute and we may want to cancel more TDs during this time.
Currently this leads to Stop Endpoint completion handler calling this
function without testing for SET_DEQ_PENDING, which will trigger the
aforementioned problems when it happens.
On all endpoints, a halt condition causes Reset Endpoint to be queued
and an error status given to the class driver, which may unlink more
URBs in response. Stop Endpoint is queued and its handler may execute
concurrently with Set TR Dequeue queued by Reset Endpoint handler.
(Reset Endpoint handler calls this function too, but there seems to
be no possibility of it running concurrently with Set TR Dequeue).
Fix xhci_invalidate_cancelled_tds() to work correctly under a pending
Set TR Dequeue. Bail out of the function when SET_DEQ_PENDING is set,
then make the completion handler call the function again and also call
xhci_giveback_invalidated_tds(), which needs to be called next.
This seems to fix another potential bug, where the handler would call
xhci_invalidate_cancelled_tds(), which may clear some deferred TDs if
a sanity check fails, and the TDs wouldn't be given back promptly.
Said sanity check seems to be wrong and prone to false positives when
the endpoint halts, but fixing it is beyond the scope of this change,
besides ensuring that cleared TDs are given back properly.
Fixes: 5ceac4402f5d ("xhci: Handle TD clearing for multiple streams case")
CC: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241106101459.775897-33-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fe6caa62b07fd39cd6a28acc8f92ba2955e11a6 upstream.
Commit 9bf4e919ccad worked around an issue introduced after an innocuous
optimisation change in LLVM main:
> len is defined as an 'int' because it is assigned from
> '__user int *optlen'. However, it is clamped against the result of
> sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit
> platforms). This is done with min_t() because min() requires compatible
> types, which results in both len and the result of sizeof() being casted
> to 'unsigned int', meaning len changes signs and the result of sizeof()
> is truncated. From there, len is passed to copy_to_user(), which has a
> third parameter type of 'unsigned long', so it is widened and changes
> signs again. This excessive casting in combination with the KCSAN
> instrumentation causes LLVM to fail to eliminate the __bad_copy_from()
> call, failing the build.
The same issue occurs in rfcomm in functions rfcomm_sock_getsockopt and
rfcomm_sock_getsockopt_old.
Change the type of len to size_t in both rfcomm_sock_getsockopt and
rfcomm_sock_getsockopt_old and replace min_t() with min().
Cc: stable@vger.kernel.org
Co-authored-by: Aleksei Vetrov <vvvvvv@google.com>
Improves: 9bf4e919ccad ("Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()")
Link: https://github.com/ClangBuiltLinux/linux/issues/2007
Link: https://github.com/llvm/llvm-project/issues/85647
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02dffe9ab092fc4c8800aee68cb7eafd37a980c4 upstream.
There is no check if stream size and start_clu are invalid.
If start_clu is EOF cluster and stream size is 4096, It will
cause uninit value access. because ei->hint_femp.eidx could
be 128(if cluster size is 4K) and wrong hint will allocate
next cluster. and this cluster will be same with the cluster
that is allocated by exfat_extend_valid_size(). The previous
patch will check invalid start_clu, but for clarity, initialize
hint_femp.eidx to zero.
Cc: stable@vger.kernel.org
Reported-by: syzbot+01218003be74b5e1213a@syzkaller.appspotmail.com
Tested-by: syzbot+01218003be74b5e1213a@syzkaller.appspotmail.com
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6bc0ebfb1d920f13c522545f114cdabb49e9408a upstream.
Commit 723e8462a4 ("pinctrl: qcom: spmi-gpio: Fix the GPIO strength
mapping") fixed a long-standing issue in the Qualcomm SPMI PMIC gpio
driver which had the 'low' and 'high' drive strength settings switched
but failed to update the debugfs interface which still gets this wrong.
Fix the debugfs code so that the exported values match the hardware
settings.
Note that this probably means that most devicetrees that try to describe
the firmware settings got this wrong if the settings were derived from
debugfs. Before the above mentioned commit the settings would have
actually matched the firmware settings even if they were described
incorrectly, but now they are inverted.
Fixes: 723e8462a4 ("pinctrl: qcom: spmi-gpio: Fix the GPIO strength mapping")
Fixes: eadff30244 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver")
Cc: Anjelique Melendez <quic_amelende@quicinc.com>
Cc: stable@vger.kernel.org # 3.19
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/20241025121622.1496-1-johan+linaro@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d7fe143cb115076fed0126ad8cf5ba6c3e575e43 upstream.
Syzbot reports a problem that a warning will be triggered while
searching a lock class in look_up_lock_class().
The cause of the issue is that a new name is created and used by
lockdep_set_subclass() instead of using the existing one. This results
in a lock instance has a different name pointer than previous registered
one stored in lock class, and WARN_ONCE() is triggered because of that
in look_up_lock_class().
To fix this, change lockdep_set_subclass() to use the existing name
instead of a new one. Hence, no new name will be created by
lockdep_set_subclass(). Hence, the warning is avoided.
[boqun: Reword the commit log to state the correct issue]
Reported-by: <syzbot+7f4a6f7f7051474e40ad@syzkaller.appspotmail.com>
Fixes: de8f5e4f2d ("lockdep: Introduce wait-type checks")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmed Ehab <bottaawesome633@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/lkml/20240824221031.7751-1-bottaawesome633@gmail.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce8f9fb651fac95dd41f69afe54d935420b945bd upstream.
If some remap_pfn_range() calls succeeded before one failed, we still have
buffer pages mapped into the userspace page tables when we drop the buffer
reference with comedi_buf_map_put(bm). The userspace mappings are only
cleaned up later in the mmap error path.
Fix it by explicitly flushing all mappings in our VMA on the error path.
See commit 79a61cc3fc04 ("mm: avoid leaving partial pfn mappings around in
error case").
Cc: stable@vger.kernel.org
Fixes: ed9eccbe89 ("Staging: add comedi core")
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20241017-comedi-tlb-v3-1-16b82f9372ce@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa52c54da40d9eee3ba87c05cdcb0cd07c04fa13 upstream.
We got a report that adding a fanotify filsystem watch prevents tail -f
from receiving events.
Reproducer:
1. Create 3 windows / login sessions. Become root in each session.
2. Choose a mounted filesystem that is pretty quiet; I picked /boot.
3. In the first window, run: fsnotifywait -S -m /boot
4. In the second window, run: echo data >> /boot/foo
5. In the third window, run: tail -f /boot/foo
6. Go back to the second window and run: echo more data >> /boot/foo
7. Observe that the tail command doesn't show the new data.
8. In the first window, hit control-C to interrupt fsnotifywait.
9. In the second window, run: echo still more data >> /boot/foo
10. Observe that the tail command in the third window has now printed
the missing data.
When stracing tail, we observed that when fanotify filesystem mark is
set, tail does get the inotify event, but the event is receieved with
the filename:
read(4, "\1\0\0\0\2\0\0\0\0\0\0\0\20\0\0\0foo\0\0\0\0\0\0\0\0\0\0\0\0\0",
50) = 32
This is unexpected, because tail is watching the file itself and not its
parent and is inconsistent with the inotify event received by tail when
fanotify filesystem mark is not set:
read(4, "\1\0\0\0\2\0\0\0\0\0\0\0\0\0\0\0", 50) = 16
The inteference between different fsnotify groups was caused by the fact
that the mark on the sb requires the filename, so the filename is passed
to fsnotify(). Later on, fsnotify_handle_event() tries to take care of
not passing the filename to groups (such as inotify) that are interested
in the filename only when the parent is watching.
But the logic was incorrect for the case that no group is watching the
parent, some groups are watching the sb and some watching the inode.
Reported-by: Miklos Szeredi <miklos@szeredi.hu>
Fixes: 7372e79c9e ("fanotify: fix logic of reporting name info with watched parent")
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7acef99642b763ba585f4a43af999fcdbcc3dc4 upstream.
Dennis reports a boot crash on recent Lenovo laptops with a USB4 dock.
Since commit 0fc7088656 ("thunderbolt: Reset USB4 v2 host router") and
commit 59a54c5f3dbd ("thunderbolt: Reset topology created by the boot
firmware"), USB4 v2 and v1 Host Routers are reset on probe of the
thunderbolt driver.
The reset clears the Presence Detect State and Data Link Layer Link Active
bits at the USB4 Host Router's Root Port and thus causes hot removal of the
dock.
The crash occurs when pciehp is unbound from one of the dock's Downstream
Ports: pciehp creates a pci_slot on bind and destroys it on unbind. The
pci_slot contains a pointer to the pci_bus below the Downstream Port, but
a reference on that pci_bus is never acquired. The pci_bus is destroyed
before the pci_slot, so a use-after-free ensues when pci_slot_release()
accesses slot->bus.
In principle this should not happen because pci_stop_bus_device() unbinds
pciehp (and therefore destroys the pci_slot) before the pci_bus is
destroyed by pci_remove_bus_device().
However the stacktrace provided by Dennis shows that pciehp is unbound from
pci_remove_bus_device() instead of pci_stop_bus_device(). To understand
the significance of this, one needs to know that the PCI core uses a two
step process to remove a portion of the hierarchy: It first unbinds all
drivers in the sub-hierarchy in pci_stop_bus_device() and then actually
removes the devices in pci_remove_bus_device(). There is no precaution to
prevent driver binding in-between pci_stop_bus_device() and
pci_remove_bus_device().
In Dennis' case, it seems removal of the hierarchy by pciehp races with
driver binding by pci_bus_add_devices(). pciehp is bound to the
Downstream Port after pci_stop_bus_device() has run, so it is unbound by
pci_remove_bus_device() instead of pci_stop_bus_device(). Because the
pci_bus has already been destroyed at that point, accesses to it result in
a use-after-free.
One might conclude that driver binding needs to be prevented after
pci_stop_bus_device() has run. However it seems risky that pci_slot points
to pci_bus without holding a reference. Solely relying on correct ordering
of driver unbind versus pci_bus destruction is certainly not defensive
programming.
If pci_slot has a need to access data in pci_bus, it ought to acquire a
reference. Amend pci_create_slot() accordingly. Dennis reports that the
crash is not reproducible with this change.
Abridged stacktrace:
pcieport 0000:00:07.0: PME: Signaling with IRQ 156
pcieport 0000:00:07.0: pciehp: Slot #12 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
pci_bus 0000:20: dev 00, created physical slot 12
pcieport 0000:00:07.0: pciehp: Slot(12): Card not present
...
pcieport 0000:21:02.0: pciehp: pcie_disable_notification: SLOTCTRL d8 write cmd 0
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI
CPU: 13 UID: 0 PID: 134 Comm: irq/156-pciehp Not tainted 6.11.0-devel+ #1
RIP: 0010:dev_driver_string+0x12/0x40
pci_destroy_slot
pciehp_remove
pcie_port_remove_service
device_release_driver_internal
bus_remove_device
device_del
device_unregister
remove_iter
device_for_each_child
pcie_portdrv_remove
pci_device_remove
device_release_driver_internal
bus_remove_device
device_del
pci_remove_bus_device (recursive invocation)
pci_remove_bus_device
pciehp_unconfigure_device
pciehp_disable_slot
pciehp_handle_presence_or_link_change
pciehp_ist
Link: https://lore.kernel.org/r/4bfd4c0e976c1776cd08e76603903b338cf25729.1728579288.git.lukas@wunner.de
Reported-by: Dennis Wassenberg <Dennis.Wassenberg@secunet.com>
Closes: https://lore.kernel.org/r/6de4b45ff2b32dd91a805ec02ec8ec73ef411bf6.camel@secunet.com/
Tested-by: Dennis Wassenberg <Dennis.Wassenberg@secunet.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54bbee190d42166209185d89070c58a343bf514b upstream.
DDI0487K.a D13.3.1 describes the PMU overflow condition, which evaluates
to true if any counter's global enable (PMCR_EL0.E), overflow flag
(PMOVSSET_EL0[n]), and interrupt enable (PMINTENSET_EL1[n]) are all 1.
Of note, this does not require a counter to be enabled
(i.e. PMCNTENSET_EL0[n] = 1) to generate an overflow.
Align kvm_pmu_overflow_status() with the reality of the architecture
and stop using PMCNTENSET_EL0 as part of the overflow condition. The
bug was discovered while running an SBSA PMU test [*], which only sets
PMCR.E, PMOVSSET<0>, PMINTENSET<0>, and expects an overflow interrupt.
Cc: stable@vger.kernel.org
Fixes: 76d883c4e6 ("arm64: KVM: Add access handler for PMOVSSET and PMOVSCLR register")
Link: https://github.com/ARM-software/sbsa-acs/blob/master/test_pool/pmu/operating_system/test_pmu001.c
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
[ oliver: massaged changelog ]
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241120005230.2335682-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44e5d21e6d3fd2a1fed7f0327cf72e99397e2eaf upstream.
As per the kernel documentation[1], hardlockup detector should
be disabled in KVM guests as it may give false positives. On
PPC, hardlockup detector is enabled inside KVM guests because
disable_hardlockup_detector() is marked as early_initcall and it
relies on kvm_guest static key (is_kvm_guest()) which is initialized
later during boot by check_kvm_guest(), which is a core_initcall.
check_kvm_guest() is also called in pSeries_smp_probe(), which is called
before initcalls, but it is skipped if KVM guest does not have doorbell
support or if the guest is launched with SMT=1.
Call check_kvm_guest() in disable_hardlockup_detector() so that
is_kvm_guest() check goes through fine and hardlockup detector can be
disabled inside the KVM guest.
[1]: Documentation/admin-guide/sysctl/kernel.rst
Fixes: 633c8e9800 ("powerpc/pseries: Enable hardlockup watchdog for PowerVM partitions")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241108094839.33084-1-gautam@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2867eb782cf7f64c2ac427596133b6f9c3f64b7a upstream.
Apply make_spte()'s optimization to skip trying to unsync shadow pages if
and only if the old SPTE was a leaf SPTE, as non-leaf SPTEs in direct MMUs
are always writable, i.e. could trigger a false positive and incorrectly
lead to KVM creating a SPTE without write-protecting or marking shadow
pages unsync.
This bug only affects the TDP MMU, as the shadow MMU only overwrites a
shadow-present SPTE when synchronizing SPTEs (and only 4KiB SPTEs can be
unsync). Specifically, mmu_set_spte() drops any non-leaf SPTEs *before*
calling make_spte(), whereas the TDP MMU can do a direct replacement of a
page table with the leaf SPTE.
Opportunistically update the comment to explain why skipping the unsync
stuff is safe, as opposed to simply saying "it's someone else's problem".
Cc: stable@vger.kernel.org
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-5-seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b2f2d22fb424e9bebda4dbf6676cbfc7f9f62cd upstream.
Fix the AEGIS assembly code to access 'unsigned int' arguments as 32-bit
values instead of 64-bit, since the upper bits of the corresponding
64-bit registers are not guaranteed to be zero.
Note: there haven't been any reports of this bug actually causing
incorrect behavior. Neither gcc nor clang guarantee zero-extension to
64 bits, but zero-extension is likely to happen in practice because most
instructions that operate on 32-bit registers zero-extend to 64 bits.
Fixes: 1d373d4e8e ("crypto: x86 - Add optimized AEGIS implementations")
Cc: stable@vger.kernel.org
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b590160d2cf776b304eb054afafea2bd55e3620 upstream.
If the trace data buffer becomes full, a truncated flag [T] is reported
in PERF_RECORD_AUX. In some cases, the size reported is 0, even though
data must have been added to make the buffer full.
That happens when the buffer fills up from empty to full before the
Intel PT driver has updated the buffer position. Then the driver
calculates the new buffer position before calculating the data size.
If the old and new positions are the same, the data size is reported
as 0, even though it is really the whole buffer size.
Fix by detecting when the buffer position is wrapped, and adjust the
data size calculation accordingly.
Example
Use a very small buffer size (8K) and observe the size of truncated [T]
data. Before the fix, it is possible to see records of 0 size.
Before:
$ perf record -m,8K -e intel_pt// uname
Linux
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.105 MB perf.data ]
$ perf script -D --no-itrace | grep AUX | grep -F '[T]'
Warning:
AUX data lost 2 times out of 3!
5 19462712368111 0x19710 [0x40]: PERF_RECORD_AUX offset: 0 size: 0 flags: 0x1 [T]
5 19462712700046 0x19ba8 [0x40]: PERF_RECORD_AUX offset: 0x170 size: 0xe90 flags: 0x1 [T]
After:
$ perf record -m,8K -e intel_pt// uname
Linux
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.040 MB perf.data ]
$ perf script -D --no-itrace | grep AUX | grep -F '[T]'
Warning:
AUX data lost 2 times out of 3!
1 113720802995 0x4948 [0x40]: PERF_RECORD_AUX offset: 0 size: 0x2000 flags: 0x1 [T]
1 113720979812 0x6b10 [0x40]: PERF_RECORD_AUX offset: 0x2000 size: 0x2000 flags: 0x1 [T]
Fixes: 52ca9ced3f ("perf/x86/intel/pt: Add Intel PT PMU driver")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20241022155920.17511-2-adrian.hunter@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1157733344651ca505e259d6554591ff156922fa upstream.
An atomicity violation occurs when the validity of the variables
da7219->clk_src and da7219->mclk_rate is being assessed. Since the entire
assessment is not protected by a lock, the da7219 variable might still be
in flux during the assessment, rendering this check invalid.
To fix this issue, we recommend adding a lock before the block
if ((da7219->clk_src == clk_id) && (da7219->mclk_rate == freq)) so that
the legitimacy check for da7219->clk_src and da7219->mclk_rate is
protected by the lock, ensuring the validity of the check.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations.
Fixes: 6d817c0e9f ("ASoC: codecs: Add da7219 codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Link: https://patch.msgid.link/20240930101216.23723-1-chenqiuji666@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9f9d96136cba8fedd647d2c024342ce090133c2 upstream.
Commit 7c55b78818cf ("jfs: xattr: fix buffer overflow for invalid xattr")
also addresses this issue but it only fixes it for positive values, while
ea_size is an integer type and can take negative values, e.g. in case of
a corrupted filesystem. This still breaks validation and would overflow
because of implicit conversion from int to size_t in print_hex_dump().
Fix this issue by clamping the ea_size value instead.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org
Signed-off-by: Artem Sadovnikov <ancowi69@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
