On an eDP connection, the eDP sink must operate only in Enhanced Framing
Mode. The Source must send only Enhanced Framing on the main link, and
must only write a '0' to DPCD 00101h: LANE_COUNT_SET Bit 7:
ENHANCED_FRAME_EN bit.
Independent of method used, DP1.2-compliant eDP Receivers shall indicate
any eDP protocol differentiation method they support through the
Receiver Capability Field of DPCD (DPCD:0000Dh).
Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
Change-Id: I38e30426924bed531047a2d41b812d697d9f9838
According to commit 736706bee3 ("get rid of legacy 'get_ds()' function")
Every in-kernel use of this function defined it to KERNEL_DS (either as
an actual define, or as an inline function). It's an entirely
historical artifact, and long long long ago used to actually read the
segment selector valueof '%ds' on x86.
Which in the kernel is always KERNEL_DS.
Inspired by a patch from Jann Horn that just did this for a very small
subset of users (the ones in fs/), along with Al who suggested a script.
I then just took it to the logical extreme and removed all the remaining
gunk.
Roughly scripted with
git grep -l '(get_ds())' -- :^tools/ | xargs sed -i 's/(get_ds())/(KERNEL_DS)/'
git grep -lw 'get_ds' -- :^tools/ | xargs sed -i '/^#define get_ds()/d'
plus manual fixups to remove a few unusual usage patterns, the couple of
inline function cases and to fix up a comment that had become stale.
The 'get_ds()' function remains in an x86 kvm selftest, since in user
space it actually does something relevant.
Change-Id: I4b8e3436c958b7745059ea7ef4367f3fd4a0ebbe
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
According to commit fad7c90209 ("err.h: remove deprecated PTR_RET for good").
Initially, commit fa9ee9c4b9 ("include/linux/err.h: add a function to
cast error-pointers to a return value") from Uwe Kleine-König introduced
PTR_RET in 03/2011. Then, in 07/2013, commit 6e8b8726ad ("PTR_RET is
now PTR_ERR_OR_ZERO") from Rusty Russell renamed PTR_RET to
PTR_ERR_OR_ZERO, and left PTR_RET as deprecated-marked alias.
After six years since the renaming and various repeated cleanups in the
meantime, it is time to finally remove the deprecated PTR_RET for good.
Change-Id: I2b5d464dc1c6bc0409e41dd9da503f14bef17dc7
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
According to commit 4bdc0d676a ("remove ioremap_nocache and devm_ioremap_nocache").
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Change-Id: Id62917547d7d0d838ac3785f8c2bfd2d645af034
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
1.resize auto framecount, one byte per 16 pixels
2.do not change framecount value in refresh new function
3.remove ebc_refresh_task thread
4.add mutex to protect empty buf get
5.improve temperture get
Signed-off-by: Zorro Liu <lyx@rock-chips.com>
Change-Id: I80c245594cc87cc6717bafadc27562d66368eb04
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: I6c1a95c0cb15b1a5a4215acba748e7023dfd4338
In the same way of
commit 697aafe93f ("MALI: bifrost: rk: do not use deferrable work for poweroff")
Signed-off-by: Zhen Chen <chenzhen@rock-chips.com>
Change-Id: I061ca478f4e8f8a836ce3996a138b1d0382cfd2b
If the layer pass through layer mix is unused, we need to disable alpha,
at this time, the layer mix only used to transfer alpha to next mix.
Change-Id: Ibd469b4fb61b41480297bc20c346e9ceefa61fc7
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
To use tsadc_shut_m0 function, tsadc must switch to cru_shut_mode,
because tsadc_shut signal have to go through the cru to get to tsadc_shut_m0 signal.
Refer to "10.10.10.81\技术文档\thermal\rk3568_tsadc_shut.png" for details.
Change-Id: I0528917efe2f5ea6f002ebf1608815eb01f552c0
Signed-off-by: XiaoDong Huang <derrick.huang@rock-chips.com>
This is for mipi dsi on rk356x: there
is a hold signal from mipi dsi to
vop.
Mipi dsi may trigger the hold signal
when send dsi command or switch between
video mode and command mode.
vop may run into an unexpected situation if this hold
signal is rise when vop is running.
So when mipi dsi switch between video mode
or command mode, or send a dsi command, it
should set vop in stanby state.
Change-Id: I80e456d3416518436045ae8e0eec215c22b111a3
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
The f_uac1 use ep address 0x81 and 0x01 for set sample rate,
so it can only support uac1 ep1-in and ep1-out to set playback
and capture sample rate, it has limitation for USB composite
device (e.g. RNDIS & UAC1). This patch use in_ep->address and
out_ep->address instead of the fixed addresses.
Change-Id: Ie2c70e2c2ec89fb66b00cd2a64928b50ee0541cc
Signed-off-by: William Wu <william.wu@rock-chips.com>
