Ensure the pclk is enabled when register access occurs.
Change-Id: Id108a04aed8424725dcc02dec9fe46bfc724c09b
Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
There are some configs needed to update for rockchip_linux_defconfig.
As below:
1) UART number increase to 6, e.g: px30...
2) Enable HW_RANDOM_ROCKCHIP for fast ramdom number init
3) Enable some the missing configs for rk805
4) Enable ARM_ROCKCHIP_BUS_DEVFREQ config
5) Enable USB_CONFIGFS_F_UVC for UVC
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Change-Id: I880a4c59e40ba7b79f6f68fc39fca55919314e7b
Add the px30-evb-ddr3-v11-linux.dts for new panel on px30 evb boards.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Change-Id: I3f9acdd5f31c666487b1a51f611aa406ca553645
Fixes: d3d4f3e92d ("arm64: dts: rockchip: use ports to link DSI node and panel")
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Change-Id: I25328b4ac95fc88c0bbfa64c2a0dfd33040a8f63
make ARCH=arm rv1126_defconfig rv1126-facial-gate.config
Signed-off-by: Lin Jianhua <linjh@rock-chips.com>
Change-Id: I31719cb84af3d5ca12acec44df2976cdaf43e246
In rx only mode, if start is rewritten, a repeat start signal
will be generated, which may affect some peripherals.
Fixes: 42f500840d ("i2c: rk3x: Remove start state and irq")
Signed-off-by: David Wu <david.wu@rock-chips.com>
Change-Id: I1bdc6ee669bfcbd60e25abf723596791c59a9231
it produces a lot of heat when es8323 suspend, and fixed it.
Signed-off-by: XiaoTan Luo <lxt@rock-chips.com>
Change-Id: I26c9a5dacc15f4b9a5ca323993d4986848c6be7d
it has a high probability that es8323 record error, and fixed it.
Signed-off-by: XiaoTan Luo <lxt@rock-chips.com>
Change-Id: I57509a2f5ee04045bb2618a7c7ec11440030c4dc
1. when import dma-buf we should compare dma_buf->ops with
rockchip_drm_gem_prime_dmabuf_ops;
2. drm_gem_prime_import_dev add some special change for ion alloc
buffer, we must remove them from drm_prime.c for gki.
so we implement rockchip_drm_gem_prime_import to instead of
drm_gem_prime_import.
Change-Id: Iab3260b5c3efb5634d411eb1e8620fb575aa063c
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
fixed the maximum voltage value of CPU working at 408M
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Change-Id: Iaa730767007229295106d8f5e2ff7e1653f19aef
y state isr of next long frame of some sensor comes before frame end of short frame,
fix can not report luma connected with these sensor.
Signed-off-by: Hu Kejun <william.hu@rock-chips.com>
Change-Id: I9024bf330da178445aaff4aa8131dec6547e5ba5
There is a pull-up resistor added to the new touch board,
so the address of TP is changed to 0x14.
At the same time, switch the reporting coordinate method for
meet the requirement of QT using linuxfb.
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Change-Id: I1e25f7e47b2b93ccb66b1c093241eb94afc1a574
RV1126 robot defconfig removes some configs from rv1126_defconfig
which is not in use of robot boards, like BT, ethernet, LCD, VOP.
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Change-Id: I8f89e79e6b6e48005c8a4dca231ef7ea0a5a064a
drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd/dhd_linux.c:6975:39:
warning: argument to 'sizeof' in 'strncpy' call is the same expression
as the source; did you mean to use the size of the destination?
[-Wsizeof-pointer-memaccess]
error, forbidden warning:dhd_linux.c:6975
strncpy(drvname, info.driver, sizeof(info.driver));
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Change-Id: I8f39153a2df4bb2395cd9aac9bd763587f509713
Configure gtp_ics_slot_report in dts node will use slot report
to report coordinate. QT use linuxfb backend can only receive
touch reports in this way.
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Change-Id: I080d7752852e07bd8f93c86149af6021e2b0edbf
