Greg Kroah-Hartman 51ab149d5f Merge 5.10.52 into android12-5.10-lts
Changes in 5.10.52
	certs: add 'x509_revocation_list' to gitignore
	cifs: handle reconnect of tcon when there is no cached dfs referral
	KVM: mmio: Fix use-after-free Read in kvm_vm_ioctl_unregister_coalesced_mmio
	KVM: x86: Use guest MAXPHYADDR from CPUID.0x8000_0008 iff TDP is enabled
	KVM: x86/mmu: Do not apply HPA (memory encryption) mask to GPAs
	KVM: nSVM: Check the value written to MSR_VM_HSAVE_PA
	KVM: X86: Disable hardware breakpoints unconditionally before kvm_x86->run()
	scsi: core: Fix bad pointer dereference when ehandler kthread is invalid
	scsi: zfcp: Report port fc_security as unknown early during remote cable pull
	tracing: Do not reference char * as a string in histograms
	drm/i915/gtt: drop the page table optimisation
	drm/i915/gt: Fix -EDEADLK handling regression
	cgroup: verify that source is a string
	fbmem: Do not delete the mode that is still in use
	drm/dp_mst: Do not set proposed vcpi directly
	drm/dp_mst: Avoid to mess up payload table by ports in stale topology
	drm/dp_mst: Add missing drm parameters to recently added call to drm_dbg_kms()
	drm/ingenic: Fix non-OSD mode
	drm/ingenic: Switch IPU plane to type OVERLAY
	Revert "drm/ast: Remove reference to struct drm_device.pdev"
	net: bridge: multicast: fix PIM hello router port marking race
	net: bridge: multicast: fix MRD advertisement router port marking race
	leds: tlc591xx: fix return value check in tlc591xx_probe()
	ASoC: Intel: sof_sdw: add mutual exclusion between PCH DMIC and RT715
	dmaengine: fsl-qdma: check dma_set_mask return value
	scsi: arcmsr: Fix the wrong CDB payload report to IOP
	srcu: Fix broken node geometry after early ssp init
	rcu: Reject RCU_LOCKDEP_WARN() false positives
	tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero
	serial: fsl_lpuart: disable DMA for console and fix sysrq
	misc/libmasm/module: Fix two use after free in ibmasm_init_one
	misc: alcor_pci: fix null-ptr-deref when there is no PCI bridge
	ASoC: intel/boards: add missing MODULE_DEVICE_TABLE
	partitions: msdos: fix one-byte get_unaligned()
	iio: gyro: fxa21002c: Balance runtime pm + use pm_runtime_resume_and_get().
	iio: magn: bmc150: Balance runtime pm + use pm_runtime_resume_and_get()
	ALSA: usx2y: Avoid camelCase
	ALSA: usx2y: Don't call free_pages_exact() with NULL address
	Revert "ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro"
	usb: common: usb-conn-gpio: fix NULL pointer dereference of charger
	w1: ds2438: fixing bug that would always get page0
	scsi: arcmsr: Fix doorbell status being updated late on ARC-1886
	scsi: hisi_sas: Propagate errors in interrupt_init_v1_hw()
	scsi: lpfc: Fix "Unexpected timeout" error in direct attach topology
	scsi: lpfc: Fix crash when lpfc_sli4_hba_setup() fails to initialize the SGLs
	scsi: core: Cap scsi_host cmd_per_lun at can_queue
	ALSA: ac97: fix PM reference leak in ac97_bus_remove()
	tty: serial: 8250: serial_cs: Fix a memory leak in error handling path
	scsi: mpt3sas: Fix deadlock while cancelling the running firmware event
	scsi: core: Fixup calling convention for scsi_mode_sense()
	scsi: scsi_dh_alua: Check for negative result value
	fs/jfs: Fix missing error code in lmLogInit()
	scsi: megaraid_sas: Fix resource leak in case of probe failure
	scsi: megaraid_sas: Early detection of VD deletion through RaidMap update
	scsi: megaraid_sas: Handle missing interrupts while re-enabling IRQs
	scsi: iscsi: Add iscsi_cls_conn refcount helpers
	scsi: iscsi: Fix conn use after free during resets
	scsi: iscsi: Fix shost->max_id use
	scsi: qedi: Fix null ref during abort handling
	scsi: qedi: Fix race during abort timeouts
	scsi: qedi: Fix TMF session block/unblock use
	scsi: qedi: Fix cleanup session block/unblock use
	mfd: da9052/stmpe: Add and modify MODULE_DEVICE_TABLE
	mfd: cpcap: Fix cpcap dmamask not set warnings
	ASoC: img: Fix PM reference leak in img_i2s_in_probe()
	fsi: Add missing MODULE_DEVICE_TABLE
	serial: tty: uartlite: fix console setup
	s390/sclp_vt220: fix console name to match device
	s390: disable SSP when needed
	selftests: timers: rtcpie: skip test if default RTC device does not exist
	ALSA: sb: Fix potential double-free of CSP mixer elements
	powerpc/ps3: Add dma_mask to ps3_dma_region
	iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails
	iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation
	ASoC: soc-pcm: fix the return value in dpcm_apply_symmetry()
	gpio: zynq: Check return value of pm_runtime_get_sync
	gpio: zynq: Check return value of irq_get_irq_data
	scsi: storvsc: Correctly handle multiple flags in srb_status
	ALSA: ppc: fix error return code in snd_pmac_probe()
	selftests/powerpc: Fix "no_handler" EBB selftest
	gpio: pca953x: Add support for the On Semi pca9655
	powerpc/mm/book3s64: Fix possible build error
	ASoC: soc-core: Fix the error return code in snd_soc_of_parse_audio_routing()
	habanalabs/gaudi: set the correct cpu_id on MME2_QM failure
	habanalabs: remove node from list before freeing the node
	s390/processor: always inline stap() and __load_psw_mask()
	s390/ipl_parm: fix program check new psw handling
	s390/mem_detect: fix diag260() program check new psw handling
	s390/mem_detect: fix tprot() program check new psw handling
	Input: hideep - fix the uninitialized use in hideep_nvm_unlock()
	ALSA: bebob: add support for ToneWeal FW66
	ALSA: usb-audio: scarlett2: Fix 18i8 Gen 2 PCM Input count
	ALSA: usb-audio: scarlett2: Fix data_mutex lock
	ALSA: usb-audio: scarlett2: Fix scarlett2_*_ctl_put() return values
	usb: gadget: f_hid: fix endianness issue with descriptors
	usb: gadget: hid: fix error return code in hid_bind()
	powerpc/boot: Fixup device-tree on little endian
	ASoC: Intel: kbl_da7219_max98357a: shrink platform_id below 20 characters
	backlight: lm3630a: Fix return code of .update_status() callback
	ALSA: hda: Add IRQ check for platform_get_irq()
	ALSA: usb-audio: scarlett2: Fix 6i6 Gen 2 line out descriptions
	ALSA: firewire-motu: fix detection for S/PDIF source on optical interface in v2 protocol
	leds: turris-omnia: add missing MODULE_DEVICE_TABLE
	staging: rtl8723bs: fix macro value for 2.4Ghz only device
	intel_th: Wait until port is in reset before programming it
	i2c: core: Disable client irq on reboot/shutdown
	phy: intel: Fix for warnings due to EMMC clock 175Mhz change in FIP
	lib/decompress_unlz4.c: correctly handle zero-padding around initrds.
	kcov: add __no_sanitize_coverage to fix noinstr for all architectures
	power: supply: sc27xx: Add missing MODULE_DEVICE_TABLE
	power: supply: sc2731_charger: Add missing MODULE_DEVICE_TABLE
	pwm: spear: Don't modify HW state in .remove callback
	PCI: ftpci100: Rename macro name collision
	power: supply: ab8500: Avoid NULL pointers
	PCI: hv: Fix a race condition when removing the device
	power: supply: max17042: Do not enforce (incorrect) interrupt trigger type
	power: reset: gpio-poweroff: add missing MODULE_DEVICE_TABLE
	ARM: 9087/1: kprobes: test-thumb: fix for LLVM_IAS=1
	PCI/P2PDMA: Avoid pci_get_slot(), which may sleep
	NFSv4: Fix delegation return in cases where we have to retry
	PCI: pciehp: Ignore Link Down/Up caused by DPC
	watchdog: Fix possible use-after-free in wdt_startup()
	watchdog: sc520_wdt: Fix possible use-after-free in wdt_turnoff()
	watchdog: Fix possible use-after-free by calling del_timer_sync()
	watchdog: imx_sc_wdt: fix pretimeout
	watchdog: iTCO_wdt: Account for rebooting on second timeout
	x86/fpu: Return proper error codes from user access functions
	remoteproc: core: Fix cdev remove and rproc del
	PCI: tegra: Add missing MODULE_DEVICE_TABLE
	orangefs: fix orangefs df output.
	ceph: remove bogus checks and WARN_ONs from ceph_set_page_dirty
	drm/gma500: Add the missed drm_gem_object_put() in psb_user_framebuffer_create()
	NFS: nfs_find_open_context() may only select open files
	power: supply: charger-manager: add missing MODULE_DEVICE_TABLE
	power: supply: ab8500: add missing MODULE_DEVICE_TABLE
	drm/amdkfd: fix sysfs kobj leak
	pwm: img: Fix PM reference leak in img_pwm_enable()
	pwm: tegra: Don't modify HW state in .remove callback
	ACPI: AMBA: Fix resource name in /proc/iomem
	ACPI: video: Add quirk for the Dell Vostro 3350
	PCI: rockchip: Register IRQ handlers after device and data are ready
	virtio-blk: Fix memory leak among suspend/resume procedure
	virtio_net: Fix error handling in virtnet_restore()
	virtio_console: Assure used length from device is limited
	f2fs: atgc: fix to set default age threshold
	NFSD: Fix TP_printk() format specifier in nfsd_clid_class
	x86/signal: Detect and prevent an alternate signal stack overflow
	f2fs: add MODULE_SOFTDEP to ensure crc32 is included in the initramfs
	f2fs: compress: fix to disallow temp extension
	remoteproc: k3-r5: Fix an error message
	PCI/sysfs: Fix dsm_label_utf16s_to_utf8s() buffer overrun
	power: supply: rt5033_battery: Fix device tree enumeration
	NFSv4: Initialise connection to the server in nfs4_alloc_client()
	NFSv4: Fix an Oops in pnfs_mark_request_commit() when doing O_DIRECT
	misc: alcor_pci: fix inverted branch condition
	um: fix error return code in slip_open()
	um: fix error return code in winch_tramp()
	ubifs: Fix off-by-one error
	ubifs: journal: Fix error return code in ubifs_jnl_write_inode()
	watchdog: aspeed: fix hardware timeout calculation
	watchdog: jz4740: Fix return value check in jz4740_wdt_probe()
	SUNRPC: prevent port reuse on transports which don't request it.
	nfs: fix acl memory leak of posix_acl_create()
	ubifs: Set/Clear I_LINKABLE under i_lock for whiteout inode
	PCI: iproc: Fix multi-MSI base vector number allocation
	PCI: iproc: Support multi-MSI only on uniprocessor kernel
	f2fs: fix to avoid adding tab before doc section
	x86/fpu: Fix copy_xstate_to_kernel() gap handling
	x86/fpu: Limit xstate copy size in xstateregs_set()
	PCI: intel-gw: Fix INTx enable
	pwm: imx1: Don't disable clocks at device remove time
	PCI: tegra194: Fix tegra_pcie_ep_raise_msi_irq() ill-defined shift
	vdpa/mlx5: Fix umem sizes assignments on VQ create
	vdpa/mlx5: Fix possible failure in umem size calculation
	virtio_net: move tx vq operation under tx queue lock
	nvme-tcp: can't set sk_user_data without write_lock
	nfsd: Reduce contention for the nfsd_file nf_rwsem
	ALSA: isa: Fix error return code in snd_cmi8330_probe()
	vdpa/mlx5: Clear vq ready indication upon device reset
	NFSv4/pnfs: Fix the layout barrier update
	NFSv4/pnfs: Fix layoutget behaviour after invalidation
	NFSv4/pNFS: Don't call _nfs4_pnfs_v3_ds_connect multiple times
	hexagon: handle {,SOFT}IRQENTRY_TEXT in linker script
	hexagon: use common DISCARDS macro
	ARM: dts: gemini-rut1xx: remove duplicate ethernet node
	reset: RESET_BRCMSTB_RESCAL should depend on ARCH_BRCMSTB
	reset: RESET_INTEL_GW should depend on X86
	reset: a10sr: add missing of_match_table reference
	ARM: exynos: add missing of_node_put for loop iteration
	ARM: dts: exynos: fix PWM LED max brightness on Odroid XU/XU3
	ARM: dts: exynos: fix PWM LED max brightness on Odroid HC1
	ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4
	memory: stm32-fmc2-ebi: add missing of_node_put for loop iteration
	memory: atmel-ebi: add missing of_node_put for loop iteration
	reset: brcmstb: Add missing MODULE_DEVICE_TABLE
	memory: pl353: Fix error return code in pl353_smc_probe()
	ARM: dts: sun8i: h3: orangepi-plus: Fix ethernet phy-mode
	rtc: fix snprintf() checking in is_rtc_hctosys()
	arm64: dts: renesas: v3msk: Fix memory size
	ARM: dts: r8a7779, marzen: Fix DU clock names
	arm64: dts: ti: j7200-main: Enable USB2 PHY RX sensitivity workaround
	arm64: dts: renesas: Add missing opp-suspend properties
	arm64: dts: renesas: r8a7796[01]: Fix OPP table entry voltages
	ARM: dts: stm32: Connect PHY IRQ line on DH STM32MP1 SoM
	ARM: dts: stm32: Rework LAN8710Ai PHY reset on DHCOM SoM
	arm64: dts: qcom: trogdor: Add no-hpd to DSI bridge node
	firmware: tegra: Fix error return code in tegra210_bpmp_init()
	firmware: arm_scmi: Reset Rx buffer to max size during async commands
	dt-bindings: i2c: at91: fix example for scl-gpios
	ARM: dts: BCM5301X: Fixup SPI binding
	reset: bail if try_module_get() fails
	arm64: dts: renesas: r8a779a0: Drop power-domains property from GIC node
	arm64: dts: ti: k3-j721e-main: Fix external refclk input to SERDES
	memory: fsl_ifc: fix leak of IO mapping on probe failure
	memory: fsl_ifc: fix leak of private memory on probe failure
	arm64: dts: allwinner: a64-sopine-baseboard: change RGMII mode to TXID
	ARM: dts: dra7: Fix duplicate USB4 target module node
	ARM: dts: am335x: align ti,pindir-d0-out-d1-in property with dt-shema
	ARM: dts: am437x: align ti,pindir-d0-out-d1-in property with dt-shema
	thermal/drivers/sprd: Add missing MODULE_DEVICE_TABLE
	ARM: dts: imx6q-dhcom: Fix ethernet reset time properties
	ARM: dts: imx6q-dhcom: Fix ethernet plugin detection problems
	ARM: dts: imx6q-dhcom: Add gpios pinctrl for i2c bus recovery
	thermal/drivers/rcar_gen3_thermal: Fix coefficient calculations
	firmware: turris-mox-rwtm: fix reply status decoding function
	firmware: turris-mox-rwtm: report failures better
	firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng
	firmware: turris-mox-rwtm: show message about HWRNG registration
	arm64: dts: rockchip: Re-add regulator-boot-on, regulator-always-on for vdd_gpu on rk3399-roc-pc
	arm64: dts: rockchip: Re-add regulator-always-on for vcc_sdio for rk3399-roc-pc
	scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
	sched/uclamp: Ignore max aggregation if rq is idle
	jump_label: Fix jump_label_text_reserved() vs __init
	static_call: Fix static_call_text_reserved() vs __init
	mips: always link byteswap helpers into decompressor
	mips: disable branch profiling in boot/decompress.o
	MIPS: vdso: Invalid GIC access through VDSO
	scsi: scsi_dh_alua: Fix signedness bug in alua_rtpg()
	seq_file: disallow extremely large seq buffer allocations
	Linux 5.10.52

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ic1b04661728db8b0e060ca6935783e15a22210da
2021-07-20 16:36:53 +02:00
2021-07-20 16:36:53 +02:00
2021-07-20 16:36:53 +02:00
2021-07-19 17:29:53 +02:00
2021-07-20 16:36:53 +02:00
2021-05-20 15:35:25 +02:00
2021-05-20 15:35:25 +02:00
2021-07-20 16:36:53 +02:00

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)
Description
No description provided
Readme 7.9 GiB
Languages
C 97.7%
Assembly 1.6%
Makefile 0.3%
Perl 0.1%