Charan Teja Kalla 8ca606e98b FROMLIST: mm: fix use-after free of page_ext after race with memory-offline
The below is one path where race between page_ext and  offline of the
respective memory blocks will cause use-after-free on the access of
page_ext structure.

process1		              process2
---------                             ---------
a)doing /proc/page_owner           doing memory offline
			           through offline_pages.

b)PageBuddy check is failed
thus proceed to get the
page_owner information
through page_ext access.
page_ext = lookup_page_ext(page);

				    migrate_pages();
				    .................
				Since all pages are successfully
				migrated as part of the offline
				operation,send MEM_OFFLINE notification
				where for page_ext it calls:
				offline_page_ext()-->
				__free_page_ext()-->
				   free_page_ext()-->
				     vfree(ms->page_ext)
			           mem_section->page_ext = NULL

c) Check for the PAGE_EXT flags
in the page_ext->flags access
results into the use-after-free(leading
to the translation faults).

As mentioned above, there is really no synchronization between page_ext
access and its freeing in the memory_offline.

The memory offline steps(roughly) on a memory block is as below:
1) Isolate all the pages
2) while(1)
  try free the pages to buddy.(->free_list[MIGRATE_ISOLATE])
3) delete the pages from this buddy list.
4) Then free page_ext.(Note: The struct page is still alive as it is
freed only during hot remove of the memory which frees the memmap, which
steps the user might not perform).

This design leads to the state where struct page is alive but the struct
page_ext is freed, where the later is ideally part of the former which
just representing the page_flags (check [3] for why this design is
chosen).

The above mentioned race is just one example __but the problem persists
in the other paths too involving page_ext->flags access(eg:
page_is_idle())__.

Fix all the paths where offline races with page_ext access by
maintaining synchronization with rcu lock and is achieved in 3 steps:
1) Invalidate all the page_ext's of the sections of a memory block by
storing a flag in the LSB of mem_section->page_ext.

2) Wait till all the existing readers to finish working with the
->page_ext's with synchronize_rcu(). Any parallel process that starts
after this call will not get page_ext, through lookup_page_ext(), for
the block parallel offline operation is being performed.

3) Now safely free all sections ->page_ext's of the block on which
offline operation is being performed.

Note: If synchronize_rcu() takes time then optimizations can be done in
this path through call_rcu()[2].

Thanks to David Hildenbrand for his views/suggestions on the initial
discussion[1] and Pavan kondeti for various inputs on this patch.

[1] https://lore.kernel.org/linux-mm/59edde13-4167-8550-86f0-11fc67882107@quicinc.com/
[2] https://lore.kernel.org/all/a26ce299-aed1-b8ad-711e-a49e82bdd180@quicinc.com/T/#u
[3] https://lore.kernel.org/all/6fa6b7aa-731e-891c-3efb-a03d6a700efa@redhat.com/

Bug: 236222283
Bug: 240196534
Link: https://lore.kernel.org/all/1661496993-11473-1-git-send-email-quic_charante@quicinc.com/
Change-Id: Ib439ae19c61a557a5c70ea90e3c4b35a5583ba0d
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Signed-off-by: Minchan Kim <minchan@google.com>
(fixed merge conflicts and still exported lookup_page_ext)
(minchan: fixed page_pinner with new page_ext scheme)
2023-01-04 02:18:52 +00:00
2023-01-04 02:18:52 +00:00
2022-12-04 12:02:10 +00:00
2022-12-19 17:29:08 +01:00
2022-12-22 18:50:37 +00:00
2022-07-13 11:40:42 +02:00
2022-12-19 17:29:08 +01:00
2022-12-22 18:50:37 +00:00
2022-11-03 14:21:38 +09:00
2021-10-18 20:22:03 -10:00
2022-12-22 18:50:37 +00:00
2022-12-01 22:58:42 +00:00

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass scripts/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)
Description
No description provided
Readme 7.9 GiB
Languages
C 97.7%
Assembly 1.6%
Makefile 0.3%
Perl 0.1%