Greg Kroah-Hartman ba152773be Merge 5.10.11 into android12-5.10
Changes in 5.10.11
	scsi: target: tcmu: Fix use-after-free of se_cmd->priv
	mtd: rawnand: gpmi: fix dst bit offset when extracting raw payload
	mtd: rawnand: nandsim: Fix the logic when selecting Hamming soft ECC engine
	i2c: tegra: Wait for config load atomically while in ISR
	i2c: bpmp-tegra: Ignore unknown I2C_M flags
	platform/x86: i2c-multi-instantiate: Don't create platform device for INT3515 ACPI nodes
	platform/x86: ideapad-laptop: Disable touchpad_switch for ELAN0634
	ALSA: seq: oss: Fix missing error check in snd_seq_oss_synth_make_info()
	ALSA: hda/realtek - Limit int mic boost on Acer Aspire E5-575T
	ALSA: hda/via: Add minimum mute flag
	crypto: xor - Fix divide error in do_xor_speed()
	dm crypt: fix copy and paste bug in crypt_alloc_req_aead
	ACPI: scan: Make acpi_bus_get_device() clear return pointer on error
	btrfs: don't get an EINTR during drop_snapshot for reloc
	btrfs: do not double free backref nodes on error
	btrfs: fix lockdep splat in btrfs_recover_relocation
	btrfs: don't clear ret in btrfs_start_dirty_block_groups
	btrfs: send: fix invalid clone operations when cloning from the same file and root
	fs: fix lazytime expiration handling in __writeback_single_inode()
	pinctrl: ingenic: Fix JZ4760 support
	mmc: core: don't initialize block size from ext_csd if not present
	mmc: sdhci-of-dwcmshc: fix rpmb access
	mmc: sdhci-xenon: fix 1.8v regulator stabilization
	mmc: sdhci-brcmstb: Fix mmc timeout errors on S5 suspend
	dm: avoid filesystem lookup in dm_get_dev_t()
	dm integrity: fix a crash if "recalculate" used without "internal_hash"
	dm integrity: conditionally disable "recalculate" feature
	drm/atomic: put state on error path
	drm/syncobj: Fix use-after-free
	drm/amdgpu: remove gpu info firmware of green sardine
	drm/amd/display: DCN2X Find Secondary Pipe properly in MPO + ODM Case
	drm/i915/gt: Prevent use of engine->wa_ctx after error
	drm/i915: Check for rq->hwsp validity after acquiring RCU lock
	ASoC: Intel: haswell: Add missing pm_ops
	ASoC: rt711: mutex between calibration and power state changes
	SUNRPC: Handle TCP socket sends with kernel_sendpage() again
	HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device
	HID: sony: select CONFIG_CRC32
	dm integrity: select CRYPTO_SKCIPHER
	x86/hyperv: Fix kexec panic/hang issues
	scsi: ufs: Relax the condition of UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL
	scsi: ufs: Correct the LUN used in eh_device_reset_handler() callback
	scsi: qedi: Correct max length of CHAP secret
	scsi: scsi_debug: Fix memleak in scsi_debug_init()
	scsi: sd: Suppress spurious errors when WRITE SAME is being disabled
	riscv: Fix kernel time_init()
	riscv: Fix sifive serial driver
	riscv: Enable interrupts during syscalls with M-Mode
	HID: logitech-dj: add the G602 receiver
	HID: Ignore battery for Elan touchscreen on ASUS UX550
	clk: tegra30: Add hda clock default rates to clock driver
	ALSA: hda/tegra: fix tegra-hda on tegra30 soc
	riscv: cacheinfo: Fix using smp_processor_id() in preemptible
	arm64: make atomic helpers __always_inline
	xen: Fix event channel callback via INTX/GSI
	x86/xen: Add xen_no_vector_callback option to test PCI INTX delivery
	x86/xen: Fix xen_hvm_smp_init() when vector callback not available
	dts: phy: fix missing mdio device and probe failure of vsc8541-01 device
	dts: phy: add GPIO number and active state used for phy reset
	riscv: defconfig: enable gpio support for HiFive Unleashed
	drm/amdgpu/psp: fix psp gfx ctrl cmds
	drm/amd/display: disable dcn10 pipe split by default
	HID: logitech-hidpp: Add product ID for MX Ergo in Bluetooth mode
	drm/amd/display: Fix to be able to stop crc calculation
	drm/nouveau/bios: fix issue shadowing expansion ROMs
	drm/nouveau/privring: ack interrupts the same way as RM
	drm/nouveau/i2c/gm200: increase width of aux semaphore owner fields
	drm/nouveau/mmu: fix vram heap sizing
	drm/nouveau/kms/nv50-: fix case where notifier buffer is at offset 0
	io_uring: flush timeouts that should already have expired
	libperf tests: If a test fails return non-zero
	libperf tests: Fail when failing to get a tracepoint id
	RISC-V: Set current memblock limit
	RISC-V: Fix maximum allowed phsyical memory for RV32
	x86/xen: fix 'nopvspin' build error
	nfsd: Fixes for nfsd4_encode_read_plus_data()
	nfsd: Don't set eof on a truncated READ_PLUS
	gpiolib: cdev: fix frame size warning in gpio_ioctl()
	pinctrl: aspeed: g6: Fix PWMG0 pinctrl setting
	pinctrl: mediatek: Fix fallback call path
	RDMA/ucma: Do not miss ctx destruction steps in some cases
	btrfs: print the actual offset in btrfs_root_name
	scsi: megaraid_sas: Fix MEGASAS_IOC_FIRMWARE regression
	scsi: ufs: ufshcd-pltfrm depends on HAS_IOMEM
	scsi: ufs: Fix tm request when non-fatal error happens
	crypto: omap-sham - Fix link error without crypto-engine
	bpf: Prevent double bpf_prog_put call from bpf_tracing_prog_attach
	powerpc: Use the common INIT_DATA_SECTION macro in vmlinux.lds.S
	powerpc: Fix alignment bug within the init sections
	arm64: entry: remove redundant IRQ flag tracing
	bpf: Reject too big ctx_size_in for raw_tp test run
	drm/amdkfd: Fix out-of-bounds read in kdf_create_vcrat_image_cpu()
	RDMA/umem: Avoid undefined behavior of rounddown_pow_of_two()
	RDMA/cma: Fix error flow in default_roce_mode_store
	printk: ringbuffer: fix line counting
	printk: fix kmsg_dump_get_buffer length calulations
	iov_iter: fix the uaccess area in copy_compat_iovec_from_user
	i2c: octeon: check correct size of maximum RECV_LEN packet
	drm/vc4: Unify PCM card's driver_name
	platform/x86: intel-vbtn: Drop HP Stream x360 Convertible PC 11 from allow-list
	platform/x86: hp-wmi: Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors
	gpio: sifive: select IRQ_DOMAIN_HIERARCHY rather than depend on it
	ALSA: hda: Balance runtime/system PM if direct-complete is disabled
	xsk: Clear pool even for inactive queues
	selftests: net: fib_tests: remove duplicate log test
	can: dev: can_restart: fix use after free bug
	can: vxcan: vxcan_xmit: fix use after free bug
	can: peak_usb: fix use after free bugs
	perf evlist: Fix id index for heterogeneous systems
	i2c: sprd: depend on COMMON_CLK to fix compile tests
	iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
	iio: ad5504: Fix setting power-down state
	drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
	iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free()
	counter:ti-eqep: remove floor
	powerpc/64s: fix scv entry fallback flush vs interrupt
	cifs: do not fail __smb_send_rqst if non-fatal signals are pending
	irqchip/mips-cpu: Set IPI domain parent chip
	x86/fpu: Add kernel_fpu_begin_mask() to selectively initialize state
	x86/topology: Make __max_die_per_package available unconditionally
	x86/mmx: Use KFPU_387 for MMX string operations
	x86/setup: don't remove E820_TYPE_RAM for pfn 0
	proc_sysctl: fix oops caused by incorrect command parameters
	mm: memcg/slab: optimize objcg stock draining
	mm: memcg: fix memcg file_dirty numa stat
	mm: fix numa stats for thp migration
	io_uring: iopoll requests should also wake task ->in_idle state
	io_uring: fix SQPOLL IORING_OP_CLOSE cancelation state
	io_uring: fix short read retries for non-reg files
	intel_th: pci: Add Alder Lake-P support
	stm class: Fix module init return on allocation failure
	serial: mvebu-uart: fix tx lost characters at power off
	ehci: fix EHCI host controller initialization sequence
	USB: ehci: fix an interrupt calltrace error
	usb: gadget: aspeed: fix stop dma register setting.
	USB: gadget: dummy-hcd: Fix errors in port-reset handling
	usb: udc: core: Use lock when write to soft_connect
	usb: bdc: Make bdc pci driver depend on BROKEN
	usb: cdns3: imx: fix writing read-only memory issue
	usb: cdns3: imx: fix can't create core device the second time issue
	xhci: make sure TRB is fully written before giving it to the controller
	xhci: tegra: Delay for disabling LFPS detector
	drivers core: Free dma_range_map when driver probe failed
	driver core: Fix device link device name collision
	driver core: Extend device_is_dependent()
	drm/i915: s/intel_dp_sink_dpms/intel_dp_set_power/
	drm/i915: Only enable DFP 4:4:4->4:2:0 conversion when outputting YCbCr 4:4:4
	x86/entry: Fix noinstr fail
	x86/cpu/amd: Set __max_die_per_package on AMD
	cls_flower: call nla_ok() before nla_next()
	netfilter: rpfilter: mask ecn bits before fib lookup
	tools: gpio: fix %llu warning in gpio-event-mon.c
	tools: gpio: fix %llu warning in gpio-watch.c
	drm/i915/hdcp: Update CP property in update_pipe
	sh: dma: fix kconfig dependency for G2_DMA
	sh: Remove unused HAVE_COPY_THREAD_TLS macro
	locking/lockdep: Cure noinstr fail
	ASoC: SOF: Intel: fix page fault at probe if i915 init fails
	octeontx2-af: Fix missing check bugs in rvu_cgx.c
	net: dsa: mv88e6xxx: also read STU state in mv88e6250_g1_vtu_getnext
	selftests/powerpc: Fix exit status of pkey tests
	sh_eth: Fix power down vs. is_opened flag ordering
	nvme-pci: refactor nvme_unmap_data
	nvme-pci: fix error unwind in nvme_map_data
	cachefiles: Drop superfluous readpages aops NULL check
	lightnvm: fix memory leak when submit fails
	skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() too
	kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow
	kasan: fix incorrect arguments passing in kasan_add_zero_shadow
	tcp: fix TCP socket rehash stats mis-accounting
	net_sched: gen_estimator: support large ewma log
	udp: mask TOS bits in udp_v4_early_demux()
	ipv6: create multicast route with RTPROT_KERNEL
	net_sched: avoid shift-out-of-bounds in tcindex_set_parms()
	net_sched: reject silly cell_log in qdisc_get_rtab()
	ipv6: set multicast flag on the multicast route
	net: mscc: ocelot: allow offloading of bridge on top of LAG
	net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabled
	net: dsa: b53: fix an off by one in checking "vlan->vid"
	tcp: do not mess with cloned skbs in tcp_add_backlog()
	tcp: fix TCP_USER_TIMEOUT with zero window
	net: mscc: ocelot: Fix multicast to the CPU port
	net: core: devlink: use right genl user_ptr when handling port param get/set
	pinctrl: qcom: Allow SoCs to specify a GPIO function that's not 0
	pinctrl: qcom: No need to read-modify-write the interrupt status
	pinctrl: qcom: Properly clear "intr_ack_high" interrupts when unmasking
	pinctrl: qcom: Don't clear pending interrupts when enabling
	x86/sev: Fix nonistr violation
	tty: implement write_iter
	tty: fix up hung_up_tty_write() conversion
	net: systemport: free dev before on error path
	x86/sev-es: Handle string port IO to kernel memory properly
	tcp: Fix potential use-after-free due to double kfree()
	ASoC: SOF: Intel: hda: Avoid checking jack on system suspend
	drm/i915/hdcp: Get conn while content_type changed
	bpf: Local storage helpers should check nullness of owner ptr passed
	kernfs: implement ->read_iter
	kernfs: implement ->write_iter
	kernfs: wire up ->splice_read and ->splice_write
	interconnect: imx8mq: Use icc_sync_state
	fs/pipe: allow sendfile() to pipe again
	Commit 9bb48c82ac ("tty: implement write_iter") converted the tty layer to use write_iter. Fix the redirected_tty_write declaration also in n_tty and change the comparisons to use write_iter instead of write. also in n_tty and change the comparisons to use write_iter instead of write.
	mm: fix initialization of struct page for holes in memory layout
	Revert "mm: fix initialization of struct page for holes in memory layout"
	Linux 5.10.11

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I502239d06f9bcd68b59149376f3c796c64de5942
2021-01-27 12:12:33 +01:00
2021-01-20 13:38:21 -08:00
2021-01-27 12:12:33 +01:00
2021-01-19 18:49:54 +01:00
2021-01-27 12:12:33 +01:00
2021-01-27 12:12:33 +01:00
2021-01-27 12:12:33 +01:00
2021-01-27 12:12:33 +01:00
2021-01-27 12:12:33 +01:00
2021-01-27 12:12:33 +01:00
2021-01-27 12:12:33 +01:00
2021-01-23 16:16:06 +01:00
2021-01-19 18:49:54 +01:00
2021-01-27 12:12:33 +01:00
2021-01-27 12:12:33 +01:00
2021-01-12 20:18:22 +01:00
2021-01-27 12:12:33 +01:00

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)
Description
No description provided
Readme 7.9 GiB
Languages
C 97.7%
Assembly 1.6%
Makefile 0.3%
Perl 0.1%