mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-07 19:30:30 +09:00
bdb69a7d690dce89a755e99633677ee3b44b6300
Changes in 5.10.127 vt: drop old FONT ioctls random: schedule mix_interrupt_randomness() less often random: quiet urandom warning ratelimit suppression message ALSA: hda/via: Fix missing beep setup ALSA: hda/conexant: Fix missing beep setup ALSA: hda/realtek: Add mute LED quirk for HP Omen laptop ALSA: hda/realtek - ALC897 headset MIC no sound ALSA: hda/realtek: Apply fixup for Lenovo Yoga Duet 7 properly ALSA: hda/realtek: Add quirk for Clevo PD70PNT ALSA: hda/realtek: Add quirk for Clevo NS50PU net: openvswitch: fix parsing of nw_proto for IPv6 fragments btrfs: add error messages to all unrecognized mount options mmc: sdhci-pci-o2micro: Fix card detect by dealing with debouncing mtd: rawnand: gpmi: Fix setting busy timeout setting ata: libata: add qc->flags in ata_qc_complete_template tracepoint dm era: commit metadata in postsuspend after worker stops dm mirror log: clear log bits up to BITS_PER_LONG boundary USB: serial: option: add Telit LE910Cx 0x1250 composition USB: serial: option: add Quectel EM05-G modem USB: serial: option: add Quectel RM500K module support drm/msm: Fix double pm_runtime_disable() call netfilter: nftables: add nft_parse_register_load() and use it netfilter: nftables: add nft_parse_register_store() and use it netfilter: use get_random_u32 instead of prandom scsi: scsi_debug: Fix zone transition to full condition drm/msm: use for_each_sgtable_sg to iterate over scatterlist bpf: Fix request_sock leak in sk lookup helpers drm/sun4i: Fix crash during suspend after component bind failure bpf, x86: Fix tail call count offset calculation on bpf2bpf call phy: aquantia: Fix AN when higher speeds than 1G are not advertised tipc: simplify the finalize work queue tipc: fix use-after-free Read in tipc_named_reinit igb: fix a use-after-free issue in igb_clean_tx_ring bonding: ARP monitor spams NETDEV_NOTIFY_PEERS notifiers net/sched: sch_netem: Fix arithmetic in netem_dump() for 32-bit platforms drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intf drm/msm/dp: check core_initialized before disable interrupts at dp_display_unbind() drm/msm/dp: fixes wrong connection state caused by failure of link train drm/msm/dp: deinitialize mainlink if link training failed drm/msm/dp: promote irq_hpd handle to handle link training correctly drm/msm/dp: fix connect/disconnect handled at irq_hpd erspan: do not assume transport header is always set net/tls: fix tls_sk_proto_close executed repeatedly udmabuf: add back sanity check selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh x86/xen: Remove undefined behavior in setup_features() MIPS: Remove repetitive increase irq_err_count afs: Fix dynamic root getattr ice: ethtool: advertise 1000M speeds properly regmap-irq: Fix a bug in regmap_irq_enable() for type_in_mask chips igb: Make DMA faster when CPU is active on the PCIe link virtio_net: fix xdp_rxq_info bug after suspend/resume Revert "net/tls: fix tls_sk_proto_close executed repeatedly" nvme: centralize setting the timeout in nvme_alloc_request nvme: split nvme_alloc_request() nvme: mark nvme_setup_passsthru() inline nvme: don't check nvme_req flags for new req nvme-pci: allocate nvme_command within driver pdu nvme-pci: add NO APST quirk for Kioxia device nvme: move the Samsung X5 quirk entry to the core quirks gpio: winbond: Fix error code in winbond_gpio_get() s390/cpumf: Handle events cycles and instructions identical iio: mma8452: fix probe fail when device tree compatible is used. iio: adc: vf610: fix conversion mode sysfs node name usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMIC xhci: turn off port power in shutdown xhci-pci: Allow host runtime PM as default for Intel Raptor Lake xHCI xhci-pci: Allow host runtime PM as default for Intel Meteor Lake xHCI usb: gadget: Fix non-unique driver names in raw-gadget driver USB: gadget: Fix double-free bug in raw_gadget driver usb: chipidea: udc: check request status before setting device address f2fs: attach inline_data after setting compression iio:chemical:ccs811: rearrange iio trigger get and register iio:accel:bma180: rearrange iio trigger get and register iio:accel:mxc4005: rearrange iio trigger get and register iio: accel: mma8452: ignore the return value of reset operation iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up() iio: trigger: sysfs: fix use-after-free on remove iio: adc: stm32: fix maximum clock rate for stm32mp15x iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value) iio: adc: stm32: Fix ADCs iteration in irq handler iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message iio: adc: axp288: Override TS pin bias current for some models iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client xtensa: xtfpga: Fix refcount leak bug in setup xtensa: Fix refcount leak bug in time.c parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI parisc: Enable ARCH_HAS_STRICT_MODULE_RWX powerpc: Enable execve syscall exit tracepoint powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address powerpc/powernv: wire up rng during setup_arch ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node ARM: dts: imx6qdl: correct PU regulator ramp delay ARM: exynos: Fix refcount leak in exynos_map_pmu soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe ARM: Fix refcount leak in axxia_boot_secondary memory: samsung: exynos5422-dmc: Fix refcount leak in of_get_dram_timings ARM: cns3xxx: Fix refcount leak in cns3xxx_init modpost: fix section mismatch check for exported init/exit sections random: update comment from copy_to_user() -> copy_to_iter() kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt) powerpc/pseries: wire up rng during setup_arch() Linux 5.10.127 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: Ie890155be8976eb42f1ae1905571071eed5e66ac
How do I submit patches to Android Common Kernels
-
BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.
- Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux,
additions of
EXPORT_SYMBOL_GPL()require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export. - When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
- Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux,
additions of
-
LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.
Common Kernel patch requirements
- All patches must conform to the Linux kernel coding standards and pass
script/checkpatch.pl - Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
- If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch:
UPSTREAM:,BACKPORT:,FROMGIT:,FROMLIST:, orANDROID:. - All patches must have a
Change-Id:tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html) - If an Android bug has been assigned, there must be a
Bug:tag. - All patches must have a
Signed-off-by:tag by the author and the submitter
Additional requirements are listed below based on patch type
Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:
- If the patch is a cherry-pick from Linux mainline with no changes at all
- tag the patch subject with
UPSTREAM:. - add upstream commit information with a
(cherry picked from commit ...)line - Example:
- if the upstream commit message is
- tag the patch subject with
important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
- then Joe Smith would upload the patch for the common kernel as
UPSTREAM: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
(cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
Signed-off-by: Joe Smith <joe.smith@foo.org>
- If the patch requires any changes from the upstream version, tag the patch with
BACKPORT:instead ofUPSTREAM:.- use the same tags as
UPSTREAM: - add comments about the changes under the
(cherry picked from commit ...)line - Example:
- use the same tags as
BACKPORT: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
(cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
[joe: Resolved minor conflict in drivers/foo/bar.c ]
Signed-off-by: Joe Smith <joe.smith@foo.org>
Requirements for other backports: FROMGIT:, FROMLIST:,
- If the patch has been merged into an upstream maintainer tree, but has not yet
been merged into Linux mainline
- tag the patch subject with
FROMGIT: - add info on where the patch came from as
(cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't uselinux-nextfor example). - if changes were required, use
BACKPORT: FROMGIT: - Example:
- if the commit message in the maintainer tree is
- tag the patch subject with
important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
- then Joe Smith would upload the patch for the common kernel as
FROMGIT: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
(cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
Signed-off-by: Joe Smith <joe.smith@foo.org>
- If the patch has been submitted to LKML, but not accepted into any maintainer tree
- tag the patch subject with
FROMLIST: - add a
Link:tag with a link to the submittal on lore.kernel.org - add a
Bug:tag with the Android bug (required for patches not accepted into a maintainer tree) - if changes were required, use
BACKPORT: FROMLIST: - Example:
- tag the patch subject with
FROMLIST: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
Signed-off-by: Joe Smith <joe.smith@foo.org>
Requirements for Android-specific patches: ANDROID:
- If the patch is fixing a bug to Android-specific code
- tag the patch subject with
ANDROID: - add a
Fixes:tag that cites the patch with the bug - Example:
- tag the patch subject with
ANDROID: fix android-specific bug in foobar.c
This is the detailed description of the important fix
Fixes: 1234abcd2468 ("foobar: add cool feature")
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
Signed-off-by: Joe Smith <joe.smith@foo.org>
- If the patch is a new feature
- tag the patch subject with
ANDROID: - add a
Bug:tag with the Android bug (required for android-specific features)
- tag the patch subject with
Description
Languages
C
97.7%
Assembly
1.6%
Makefile
0.3%
Perl
0.1%