Greg Kroah-Hartman df1d4ee9d7 Merge 5.10.130 into android13-5.10-lts
Changes in 5.10.130
	mm/slub: add missing TID updates on slab deactivation
	ALSA: hda/realtek: Add quirk for Clevo L140PU
	can: bcm: use call_rcu() instead of costly synchronize_rcu()
	can: grcan: grcan_probe(): remove extra of_node_get()
	can: gs_usb: gs_usb_open/close(): fix memory leak
	bpf: Fix incorrect verifier simulation around jmp32's jeq/jne
	bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals
	usbnet: fix memory leak in error case
	net: rose: fix UAF bug caused by rose_t0timer_expiry
	netfilter: nft_set_pipapo: release elements in clone from abort path
	netfilter: nf_tables: stricter validation of element data
	iommu/vt-d: Fix PCI bus rescan device hot add
	fbdev: fbmem: Fix logo center image dx issue
	fbmem: Check virtual screen sizes in fb_set_var()
	fbcon: Disallow setting font bigger than screen size
	fbcon: Prevent that screen size is smaller than font size
	PM: runtime: Redefine pm_runtime_release_supplier()
	memregion: Fix memregion_free() fallback definition
	video: of_display_timing.h: include errno.h
	powerpc/powernv: delay rng platform device creation until later in boot
	can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_info
	can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression
	can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits
	xfs: remove incorrect ASSERT in xfs_rename
	ARM: meson: Fix refcount leak in meson_smp_prepare_cpus
	pinctrl: sunxi: a83t: Fix NAND function name for some pins
	arm64: dts: qcom: msm8994: Fix CPU6/7 reg values
	arm64: dts: imx8mp-evk: correct mmc pad settings
	arm64: dts: imx8mp-evk: correct the uart2 pinctl value
	arm64: dts: imx8mp-evk: correct gpio-led pad settings
	arm64: dts: imx8mp-evk: correct I2C3 pad settings
	pinctrl: sunxi: sunxi_pconf_set: use correct offset
	arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo
	ARM: at91: pm: use proper compatible for sama5d2's rtc
	ARM: at91: pm: use proper compatibles for sam9x60's rtc and rtt
	ARM: dts: at91: sam9x60ek: fix eeprom compatible and size
	ARM: dts: at91: sama5d2_icp: fix eeprom compatibles
	xsk: Clear page contiguity bit when unmapping pool
	i40e: Fix dropped jumbo frames statistics
	ibmvnic: Properly dispose of all skbs during a failover.
	selftests: forwarding: fix flood_unicast_test when h2 supports IFF_UNICAST_FLT
	selftests: forwarding: fix learning_test when h1 supports IFF_UNICAST_FLT
	selftests: forwarding: fix error message in learning_test
	r8169: fix accessing unset transport header
	i2c: cadence: Unregister the clk notifier in error path
	dmaengine: imx-sdma: Allow imx8m for imx7 FW revs
	misc: rtsx_usb: fix use of dma mapped buffer for usb bulk transfer
	misc: rtsx_usb: use separate command and response buffers
	misc: rtsx_usb: set return value in rsp_buf alloc err path
	dt-bindings: dma: allwinner,sun50i-a64-dma: Fix min/max typo
	ida: don't use BUG_ON() for debugging
	dmaengine: pl330: Fix lockdep warning about non-static key
	dmaengine: at_xdma: handle errors of at_xdmac_alloc_desc() correctly
	dmaengine: ti: Fix refcount leak in ti_dra7_xbar_route_allocate
	dmaengine: ti: Add missing put_device in ti_dra7_xbar_route_allocate
	Linux 5.10.130

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Id8a7c8ed8f6f1aab605fc0ad328bbeb3d3d0946f
2022-08-10 17:51:30 +02:00
2022-08-10 17:51:30 +02:00
2022-08-10 17:51:30 +02:00
2022-05-15 18:02:37 +02:00
2022-05-15 18:02:37 +02:00
2021-05-20 15:35:25 +02:00
2022-06-19 02:47:56 +00:00

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)
Description
No description provided
Readme 7.9 GiB
Languages
C 97.7%
Assembly 1.6%
Makefile 0.3%
Perl 0.1%