mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-05 02:21:52 +09:00
e2664d0870
Jonathan writes:
First set of new device support, features and cleanup for IIO in 5.10 cycle, take 2
A few changes to how I write this cover letter.
* Started to use manufacturer prefixes to group changes better.
* Stop list minor formatting etc changes.
* Whilst I appreciate those changes, we don't need to call them out here.
New device support:
* adi,adxrs290
- New driver for this gyroscope with dt bindings. One fix follows.
* ams,as73211
- New driver for this colour sensor with dt bindings. Also includes
docs for XYZ modifiers as used for the CIE colour space. Sysfs docs.
* atlas,atlas-ezo-sensor
- Support O_2 sensor, includes new modifier for concentration.
- Support humidity sensor.
* ti,hdc2010
- New driver support hdc2010 and hdc2080 humidity sensors. Includes dt
bindings.
Cleanup, minor fixes and features
* core
- Make the trigger related stub functions static inline, avoiding some build
warnings.
- buffer-dmaengine. Allow adjusting bytes_used with residue info.
* dev_error_probe to replace open coded equivalent in many drivers.
* docs and comment fixes
- Fix some typos, doubled words, capitalisation and punctuation.
* dt binding conversions to yaml
- lltc,ltc2497
- lltc,ltc2632
- maxim,max11100
- maxim,max1118
- maxim,max9611
- microchip,mcp3201
- microchip,mcp342x (add to trivial devices)
- ti,adc0832
- ti,adc108s102
- ti,adc128s052
- ti,adc161s626
- ti,ads8344
- ti,tlc4541 (includes adding an accidentally dropped original binding doc)
* adi,adi-axi-adc
- Use kobj_to_dev instead of open coding.
* adi,ad5686
- Constify iio_chan_spec
* adi,ad8366
- Add HMC1119 to kconfig help text as the driver supports it.
* adi,ad9523
- Use devm for reset of probe and drop remove.
* adi,adxl372
- Tidy up alignment
- Add OF table
- Add peak mode support with some docs.
* bosch,bma220 (general tidy up)
- Fix some return codes.
- Use read_avail callback rather than open coding attrs.
- Use dev_get_drvdata rather than dance via to_spi_device()
- Mark PM functions as __maybe_unused rather than #ifdef fun.
- Drop ACPI_PTR protections and ifdefs.
- Tidy up header ordering.
- BIT and GENMASK
* broadcom,bcm_iproc
- Drop of_match_ptr protection and switch to mod_devicetable.h
Part of general move to get this anti-pattern out of IIO.
* melexis,mlx90614
- Simplify some calculations.
- Add some kernel_doc
- Use regmap poll loop rather than open coding.
- Add extended calibration option.
* sensortec,sx9310, wide ranging set of fixes and cleanups.
- Document dt-binding.
- Rename some macros to align better with spec sheet
- Fix some issues with irq handling.
- Drop of_match_ptr and ACPI_PTR macros to avoid unused warnings etc.
- Switch to probe_new
- Fix memory alignment for iio_push_to_buffers_with_timestamp()
- Use long for bitmaps to allow use of for_each_bit_set()
- Use regmap_read_poll instead of opencoding.
- Simplify error paths
- Enabled regulators at probe.
- Use trigger flags from firmware rather than forcing them in the driver.
* ti,adc081c
- Drop ACPI IDs that are not likely to be official ones and we don't believe
anyone is using.
* ti,adc108s102
- Drop CONFIG_OF and of_match_ptr protections.
* ti,adc128s052
- Drop of_match_ptr protection and include mod_devicetable.h
* ti,dac5571
- Support powerdown for mutlichannel usecases.
* xpowers,axp20x
- Convert from OF to generic fw / device properties. Unlikely anyone will
use this with anything other than devicetree, but this is part of a
general move across IIO.
* tag 'iio-for-5.10a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (96 commits)
drivers/iio/humidity/hdc2010.c:305:2-3: Unneeded semicolon
iio: accel: bma220: Remove unneeded blank lines
iio: accel: bma220: Use BIT() and GENMASK() macros
iio: accel: bma220: Group IIO headers together
iio: accel: bma220: Drop ACPI_PTR() and accompanying ifdeffery
iio: accel: bma220: Mark PM functions as __maybe_unused
iio: accel: bma220: Use dev_get_drvdata() directly
iio: accel: bma220: Convert to use ->read_avail()
iio: accel: bma220: Fix returned codes from bma220_init(), bma220_deinit()
dt-bindings: iio: adc: microchip,mcp3201 yaml conversion.
iio: buffer-dmaengine: adjust `bytes_used` with residue info
dt-bindings: iio: adc: ti,tlc4541 binding conversion
dt-bindings: iio: adc: tlc4541 - recover accidentally dropped binding doc
dt-bindings: iio: adc: ti,ads8344 yaml conversion
dt-bindings: iio: adc: ti,adc128s052 yaml conversion.
dt-bindings: iio: adc: ti,adc0832 yaml conversion.
dt-bindings: iio: adc: ti,adc161s626 yaml conversion.
dt-bindings: iio: adc: lltc,ltc2497 yaml conversion.
dt-bindings: iio: adc: ti,adc108s102 yaml conversion
dt-bindings: trivial-devices: Add mcp342x ADCs and drop separate binding doc.
...
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.