Finley Xiao fe111758d6 MALI: bifrost: enable regulator when suspend
When system resume, all power domains will power on in
dpm_noirq_resume_devices(), if vdd gpu is disabled before system
suspend, the pd gpu will failed to power on when system resume,
the detail as follows:

rockchip-pm-domain fd8d8000.power-management:power-controller: failed to get ack on domain 'gpu', target_idle = 0, target_ack = 0, val=0x8080f
Kernel panic - not syncing: panic_on_set_idle set ...
CPU: 0 PID: 1947 Comm: Binder:352_2 Not tainted 5.10.66 #960
Hardware name: Rockchip RK3588 EVB1 LP4 V10 Board (DT)
Call trace:
 dump_backtrace+0x0/0x1c8
 show_stack+0x1c/0x2c
 dump_stack_lvl+0xdc/0x12c
 dump_stack+0x1c/0x64
 panic+0x150/0x3a4
 rockchip_pmu_set_idle_request+0x1f8/0x1fc
 rockchip_pd_power+0x11c/0x1e0
 rockchip_pd_power_on+0x28/0x38
 genpd_sync_power_on+0xf4/0x134
 genpd_resume_noirq+0x70/0xd0
 device_resume_noirq+0x1a8/0x410
 dpm_noirq_resume_devices+0x100/0x55c
 dpm_resume_noirq+0x18/0x34
 suspend_enter+0x33c/0x52c
 suspend_devices_and_enter+0xec/0x338
 enter_state+0x12c/0x3f8
 pm_suspend+0x60/0xcc
 state_store+0x108/0x148
 kobj_attr_store+0x1c/0x34
 sysfs_kf_write+0x40/0x58
 kernfs_fop_write_iter+0xf0/0x194
 vfs_write+0x328/0x390
 ksys_write+0x78/0xe8
 __arm64_sys_write+0x20/0x30
 el0_svc_common+0xc0/0x23c
 do_el0_svc+0x28/0x88
 el0_svc+0x14/0x24
 el0_sync_handler+0x88/0xec
 el0_sync+0x1a8/0x1c0
SMP: stopping secondary CPUs

Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Change-Id: I89f80d37ab2cc61c715bce3f8a25c26552918922
2022-05-12 18:59:23 +08:00

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)
Description
No description provided
Readme 7.9 GiB
Languages
C 97.7%
Assembly 1.6%
Makefile 0.3%
Perl 0.1%