mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-07 19:30:30 +09:00
arm64: dts: rk3328-evb-android: add new dts for rk3328 evb android
this dts is copy from rk3328-evb.dts and add pwm3/firmware nodes Change-Id: Id08e5b2e2d11c34dc81d3a335d5e1a7de21e13cb Signed-off-by: Xinhuang Li <buluess.li@rock-chips.com>
This commit is contained in:
Xinhuang Li
@@ -1,4 +1,5 @@
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb-android.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3366-fpga.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3366-sheep.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
|
||||
|
||||
634
arch/arm64/boot/dts/rockchip/rk3328-evb-android.dts
Normal file
634
arch/arm64/boot/dts/rockchip/rk3328-evb-android.dts
Normal file
@@ -0,0 +1,634 @@
|
||||
/*
|
||||
* Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This library is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3328.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3328 EVB";
|
||||
compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
|
||||
|
||||
chosen {
|
||||
bootargs = "rockchip_jtag earlyprintk=uart8250-32bit,0xff130000";
|
||||
};
|
||||
|
||||
fiq-debugger {
|
||||
compatible = "rockchip,fiq-debugger";
|
||||
rockchip,serial-id = <2>;
|
||||
rockchip,signal-irq = <159>;
|
||||
rockchip,wake-irq = <0>;
|
||||
/* If enable uart uses irq instead of fiq */
|
||||
rockchip,irq-mode-enable = <0>;
|
||||
rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */
|
||||
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
firmware {
|
||||
android {
|
||||
compatible = "android,firmware";
|
||||
fstab {
|
||||
compatible = "android,fstab";
|
||||
system {
|
||||
compatible = "android,system";
|
||||
dev = "/dev/block/platform/ff520000.rksdmmc/by-name/system";
|
||||
type = "ext4";
|
||||
mnt_flags = "ro,barrier=1,inode_readahead_blks=8";
|
||||
fsmgr_flags = "wait,verify";
|
||||
};
|
||||
vendor {
|
||||
compatible = "android,vendor";
|
||||
dev = "/dev/block/platform/ff520000.rksdmmc/by-name/vendor";
|
||||
type = "ext4";
|
||||
mnt_flags = "ro,barrier=1,inode_readahead_blks=8";
|
||||
fsmgr_flags = "wait,verify";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gmac_clkin: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "gmac_clkin";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,name = "rockchip,rk3328";
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s1>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&codec>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <128>;
|
||||
simple-audio-card,name = "rockchip,hdmi";
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s0>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
spdif-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "rockchip,spdif";
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&spdif>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&spdif_out>;
|
||||
};
|
||||
};
|
||||
|
||||
spdif_out: spdif-out {
|
||||
compatible = "linux,spdif-dit";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
vcc_phy: vcc-phy-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_phy";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc_sd: sdmmc-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
gpio = <&gpio0 30 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0m1_gpio>;
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_io>;
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
compatible = "wlan-platdata";
|
||||
rockchip,grf = <&grf>;
|
||||
wifi_chip_type = "ap6354";
|
||||
sdio_vref = <1800>;
|
||||
WIFI,host_wake_irq = <&gpio1 19 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&codec {
|
||||
#sound-dai-cells = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&display_subsystem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
supports-emmc;
|
||||
disable-wp;
|
||||
non-removable;
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac2io {
|
||||
phy-supply = <&vcc_phy>;
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "input";
|
||||
snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
|
||||
assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmiim1_pins>;
|
||||
tx_delay = <0x26>;
|
||||
rx_delay = <0x11>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&gmac2phy {
|
||||
phy-supply = <&vcc_phy>;
|
||||
clock_in_out = "output";
|
||||
assigned-clocks = <&cru SCLK_MAC2PHY_SRC>;
|
||||
assigned-clock-rate = <50000000>;
|
||||
assigned-clocks = <&cru SCLK_MAC2PHY>;
|
||||
assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
mali-supply = <&vdd_logic>;
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
#sound-dai-cells = <0>;
|
||||
ddc-i2c-scl-high-time-ns = <9625>;
|
||||
ddc-i2c-scl-low-time-ns = <10000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmiphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
rk805: rk805@18 {
|
||||
compatible = "rockchip,rk805";
|
||||
status = "okay";
|
||||
reg = <0x18>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "xin32k", "rk805-clkout2";
|
||||
|
||||
rtc {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pwrkey {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "rk805-regulator";
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
vdd_logic: RK805_DCDC1@0 {
|
||||
regulator-compatible = "RK805_DCDC1";
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1450000>;
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-mode = <0x2>;
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_arm: RK805_DCDC2@1 {
|
||||
regulator-compatible = "RK805_DCDC2";
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-init-microvolt = <1225000>;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1450000>;
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-mode = <0x2>;
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: RK805_DCDC3@2 {
|
||||
regulator-compatible = "RK805_DCDC3";
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-mode = <0x2>;
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_io: RK805_DCDC4@3 {
|
||||
regulator-compatible = "RK805_DCDC4";
|
||||
regulator-name = "vcc_io";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-mode = <0x2>;
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_18: RK805_LDO1@4 {
|
||||
regulator-compatible = "RK805_LDO1";
|
||||
regulator-name = "vdd_18";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_18emmc: RK805_LDO2@5 {
|
||||
regulator-compatible = "RK805_LDO2";
|
||||
regulator-name = "vcc_18emmc";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_10: RK805_LDO3@6 {
|
||||
regulator-compatible = "RK805_LDO3";
|
||||
regulator-name = "vdd_10";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&h265e {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s0 {
|
||||
#sound-dai-cells = <0>;
|
||||
rockchip,bclk-fs = <128>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s1 {
|
||||
#sound-dai-cells = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
status = "okay";
|
||||
|
||||
vccio1-supply = <&vcc_io>;
|
||||
vccio2-supply = <&vcc_18emmc>;
|
||||
vccio3-supply = <&vcc_io>;
|
||||
vccio4-supply = <&vdd_18>;
|
||||
vccio5-supply = <&vcc_io>;
|
||||
vccio6-supply = <&vcc_io>;
|
||||
pmuio-supply = <&vcc_io>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins =
|
||||
<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; /* gpio2_a6 */
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins =
|
||||
<1 18 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm3 {
|
||||
status = "okay";
|
||||
compatible = "rockchip,remotectl-pwm";
|
||||
remote_pwm_id = <3>;
|
||||
handle_cpu_id = <1>;
|
||||
remote_support_psci = <1>;
|
||||
|
||||
ir_key1 {
|
||||
rockchip,usercode = <0x4040>;
|
||||
rockchip,key_table =
|
||||
<0xf2 KEY_REPLY>,
|
||||
<0xba KEY_BACK>,
|
||||
<0xf4 KEY_UP>,
|
||||
<0xf1 KEY_DOWN>,
|
||||
<0xef KEY_LEFT>,
|
||||
<0xee KEY_RIGHT>,
|
||||
<0xbd KEY_HOME>,
|
||||
<0xea KEY_VOLUMEUP>,
|
||||
<0xe3 KEY_VOLUMEDOWN>,
|
||||
<0xe2 KEY_SEARCH>,
|
||||
<0xb2 KEY_POWER>,
|
||||
<0xbc KEY_MUTE>,
|
||||
<0xec KEY_MENU>,
|
||||
<0xbf 0x190>,
|
||||
<0xe0 0x191>,
|
||||
<0xe1 0x192>,
|
||||
<0xe9 183>,
|
||||
<0xe6 248>,
|
||||
<0xe8 185>,
|
||||
<0xe7 186>,
|
||||
<0xf0 388>,
|
||||
<0xbe 0x175>;
|
||||
};
|
||||
|
||||
ir_key2 {
|
||||
rockchip,usercode = <0xff00>;
|
||||
rockchip,key_table =
|
||||
<0xf9 KEY_HOME>,
|
||||
<0xbf KEY_BACK>,
|
||||
<0xfb KEY_MENU>,
|
||||
<0xaa KEY_REPLY>,
|
||||
<0xb9 KEY_UP>,
|
||||
<0xe9 KEY_DOWN>,
|
||||
<0xb8 KEY_LEFT>,
|
||||
<0xea KEY_RIGHT>,
|
||||
<0xeb KEY_VOLUMEDOWN>,
|
||||
<0xef KEY_VOLUMEUP>,
|
||||
<0xf7 KEY_MUTE>,
|
||||
<0xe7 KEY_POWER>,
|
||||
<0xfc KEY_POWER>,
|
||||
<0xa9 KEY_VOLUMEDOWN>,
|
||||
<0xa8 KEY_VOLUMEDOWN>,
|
||||
<0xe0 KEY_VOLUMEDOWN>,
|
||||
<0xa5 KEY_VOLUMEDOWN>,
|
||||
<0xab 183>,
|
||||
<0xb7 388>,
|
||||
<0xe8 388>,
|
||||
<0xf8 184>,
|
||||
<0xaf 185>,
|
||||
<0xed KEY_VOLUMEDOWN>,
|
||||
<0xee 186>,
|
||||
<0xb3 KEY_VOLUMEDOWN>,
|
||||
<0xf1 KEY_VOLUMEDOWN>,
|
||||
<0xf2 KEY_VOLUMEDOWN>,
|
||||
<0xf3 KEY_SEARCH>,
|
||||
<0xb4 KEY_VOLUMEDOWN>,
|
||||
<0xbe KEY_SEARCH>;
|
||||
};
|
||||
|
||||
ir_key3 {
|
||||
rockchip,usercode = <0x1dcc>;
|
||||
rockchip,key_table =
|
||||
<0xee KEY_REPLY>,
|
||||
<0xf0 KEY_BACK>,
|
||||
<0xf8 KEY_UP>,
|
||||
<0xbb KEY_DOWN>,
|
||||
<0xef KEY_LEFT>,
|
||||
<0xed KEY_RIGHT>,
|
||||
<0xfc KEY_HOME>,
|
||||
<0xf1 KEY_VOLUMEUP>,
|
||||
<0xfd KEY_VOLUMEDOWN>,
|
||||
<0xb7 KEY_SEARCH>,
|
||||
<0xff KEY_POWER>,
|
||||
<0xf3 KEY_MUTE>,
|
||||
<0xbf KEY_MENU>,
|
||||
<0xf9 0x191>,
|
||||
<0xf5 0x192>,
|
||||
<0xb3 388>,
|
||||
<0xbe KEY_1>,
|
||||
<0xba KEY_2>,
|
||||
<0xb2 KEY_3>,
|
||||
<0xbd KEY_4>,
|
||||
<0xf9 KEY_5>,
|
||||
<0xb1 KEY_6>,
|
||||
<0xfc KEY_7>,
|
||||
<0xf8 KEY_8>,
|
||||
<0xb0 KEY_9>,
|
||||
<0xb6 KEY_0>,
|
||||
<0xb5 KEY_BACKSPACE>;
|
||||
};
|
||||
};
|
||||
|
||||
&rkvdec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdio {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
disable-wp;
|
||||
keep-power-in-suspend;
|
||||
max-frequency = <150000000>;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
||||
supports-sdio;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
|
||||
supports-sd;
|
||||
status = "okay";
|
||||
vmmc-supply = <&vcc_sd>;
|
||||
};
|
||||
|
||||
&spdif {
|
||||
#sound-dai-cells = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy {
|
||||
otg-vbus-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
|
||||
u2phy_host: host-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&u3phy {
|
||||
vbus-drv-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u3phy_utmi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u3phy_pipe {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb20_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vepu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vpu_service {
|
||||
status = "okay";
|
||||
};
|
||||
Reference in New Issue
Block a user