mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-08 03:40:35 +09:00
arm64: dts: rockchip: add RK630 evaluation board devicetree
Signed-off-by: Yanchao Hu <yanchao.hu@rock-chips.com> Change-Id: I9c8512b42c66fc34fa7de036ad6fe9608eaac729
This commit is contained in:
Yanchao Hu
@@ -111,3 +111,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nvr-demo-v10-linux.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nvr-demo-v10-linux-spi-nand.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nvr-demo-v12-linux.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nvr-demo-v12-linux-spi-nand.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk630-rk3568-ddr3-v10.dtb
|
||||
|
||||
696
arch/arm64/boot/dts/rockchip/rk630-rk3568-ddr3-v10.dts
Normal file
696
arch/arm64/boot/dts/rockchip/rk630-rk3568-ddr3-v10.dts
Normal file
@@ -0,0 +1,696 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2022 Rockchip Electronics Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/input/rk-input.h>
|
||||
#include <dt-bindings/display/drm_mipi_dsi.h>
|
||||
#include <dt-bindings/sensor-dev.h>
|
||||
#include "rk3568.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK630 RK3568 DDR3 V10 Board";
|
||||
compatible = "rockchip,rk630-rk3568-ddr3-v10", "rockchip,rk3568";
|
||||
|
||||
chosen: chosen {
|
||||
bootargs = "earlycon=uart8250,mmio32,0xfe660000 console=ttyFIQ0 root=PARTUUID=614e0000-0000 rw rootwait";
|
||||
};
|
||||
|
||||
fiq-debugger {
|
||||
compatible = "rockchip,fiq-debugger";
|
||||
rockchip,serial-id = <2>;
|
||||
rockchip,wake-irq = <0>;
|
||||
/* If enable uart uses irq instead of fiq */
|
||||
rockchip,irq-mode-enable = <1>;
|
||||
rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */
|
||||
interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
debug: debug@fd904000 {
|
||||
compatible = "rockchip,debug";
|
||||
reg = <0x0 0xfd904000 0x0 0x1000>,
|
||||
<0x0 0xfd905000 0x0 0x1000>,
|
||||
<0x0 0xfd906000 0x0 0x1000>,
|
||||
<0x0 0xfd907000 0x0 0x1000>;
|
||||
};
|
||||
|
||||
cspmu: cspmu@fd90c000 {
|
||||
compatible = "rockchip,cspmu";
|
||||
reg = <0x0 0xfd90c000 0x0 0x1000>,
|
||||
<0x0 0xfd90d000 0x0 0x1000>,
|
||||
<0x0 0xfd90e000 0x0 0x1000>,
|
||||
<0x0 0xfd90f000 0x0 0x1000>;
|
||||
};
|
||||
|
||||
adc_keys: adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
vol-up-key {
|
||||
label = "volume up";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
press-threshold-microvolt = <1750>;
|
||||
};
|
||||
};
|
||||
|
||||
dc_12v: dc-12v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "dc_12v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_usb: vcc5v0-usb {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_otg: vcc5v0-otg-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_otg";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc3v3_lcd0_n: vcc3v3-lcd0-n {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_lcd0_n";
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_lcd1_n: vcc3v3-lcd1-n {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_lcd1_n";
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&pmucru CLK_RTC_32K>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h &wifi_32k>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
post-power-on-delay-ms = <200>;
|
||||
reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wireless_wlan: wireless-wlan {
|
||||
compatible = "wlan-platdata";
|
||||
rockchip,grf = <&grf>;
|
||||
wifi_chip_type = "ap6398s";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wireless_bluetooth: wireless-bluetooth {
|
||||
compatible = "bluetooth-platdata";
|
||||
clocks = <&pmucru CLK_RTC_32K>;
|
||||
clock-names = "ext_clock";
|
||||
uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default", "rts_gpio";
|
||||
pinctrl-0 = <&uart1m0_rtsn>;
|
||||
pinctrl-1 = <&uart1_gpios>;
|
||||
BT,reset_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_gpio = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_host_irq = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&reserved_memory {
|
||||
ramoops: ramoops@110000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0x0 0x110000 0x0 0xf0000>;
|
||||
record-size = <0x20000>;
|
||||
console-size = <0x80000>;
|
||||
ftrace-size = <0x00000>;
|
||||
pmsg-size = <0x50000>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&dfi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dmc {
|
||||
center-supply = <&vdd_logic>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: tcs4525@1c {
|
||||
compatible = "tcs,tcs452x";
|
||||
reg = <0x1c>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
regulator-compatible = "fan53555-reg";
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1390000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-names = "default", "pmic-sleep",
|
||||
"pmic-power-off", "pmic-reset";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
|
||||
pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
|
||||
pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>;
|
||||
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
/* 1: rst regs (default in codes), 0: rst the pmic */
|
||||
pmic-reset-func = <0>;
|
||||
/* not save the PMIC_POWER_EN register in uboot */
|
||||
not-save-power-en = <1>;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
|
||||
pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl_rk8xx: pinctrl_rk8xx {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk817_slppin_null: rk817_slppin_null {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk817_slppin_slp: rk817_slppin_slp {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun1";
|
||||
};
|
||||
|
||||
rk817_slppin_pwrdn: rk817_slppin_pwrdn {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun2";
|
||||
};
|
||||
|
||||
rk817_slppin_rst: rk817_slppin_rst {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun3";
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc3v3_sd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pmic {
|
||||
pmic_int: pmic_int {
|
||||
rockchip,pins =
|
||||
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
soc_slppin_gpio: soc_slppin_gpio {
|
||||
rockchip,pins =
|
||||
<0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low_pull_down>;
|
||||
};
|
||||
|
||||
soc_slppin_slp: soc_slppin_slp {
|
||||
rockchip,pins =
|
||||
<0 RK_PA2 1 &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
soc_slppin_rst: soc_slppin_rst {
|
||||
rockchip,pins =
|
||||
<0 RK_PA2 2 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wifi_32k: wifi-32k {
|
||||
rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
wifi_host_wake_irq: wifi-host-wake-irq {
|
||||
rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
uart1_gpios: uart1-gpios {
|
||||
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* There are 10 independent IO domains in RK3566/RK3568, including PMUIO[0:2] and VCCIO[1:7].
|
||||
* 1/ PMUIO0 and PMUIO1 are fixed-level power domains which cannot be configured;
|
||||
* 2/ PMUIO2 and VCCIO1,VCCIO[3:7] domains require that their hardware power supply voltages
|
||||
* must be consistent with the software configuration correspondingly
|
||||
* a/ When the hardware IO level is connected to 1.8V, the software voltage configuration
|
||||
* should also be configured to 1.8V accordingly;
|
||||
* b/ When the hardware IO level is connected to 3.3V, the software voltage configuration
|
||||
* should also be configured to 3.3V accordingly;
|
||||
* 3/ VCCIO2 voltage control selection (0xFDC20140)
|
||||
* BIT[0]: 0x0: from GPIO_0A7 (default)
|
||||
* BIT[0]: 0x1: from GRF
|
||||
* Default is determined by Pin FLASH_VOL_SEL/GPIO0_A7:
|
||||
* L:VCCIO2 must supply 3.3V
|
||||
* H:VCCIO2 must supply 1.8V
|
||||
*/
|
||||
&pmu_io_domains {
|
||||
status = "okay";
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vccio_acodec>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_1v8>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vcca_1v8>;
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
supports-emmc;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sfc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
max-frequency = <150000000>;
|
||||
supports-sdio;
|
||||
bus-width = <4>;
|
||||
disable-wp;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
|
||||
};
|
||||
|
||||
&wireless_wlan {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_irq>;
|
||||
WIFI,host_wake_irq = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&u2phy0_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
vbus-supply = <&vcc5v0_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3 {
|
||||
phys = <&u2phy0_otg>;
|
||||
phy-names = "usb2-phy";
|
||||
extcon = <&usb2phy0>;
|
||||
maximum-speed = "high-speed";
|
||||
snps,dis_u2_susphy_quirk;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd30 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbhost30 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy0_us {
|
||||
rockchip,dis-u3otg0-port;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1_usq {
|
||||
rockchip,dis-u3otg1-port;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2_psq {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usbhost_dwc3 {
|
||||
phys = <&u2phy0_host>;
|
||||
phy-names = "usb2-phy";
|
||||
maximum-speed = "high-speed";
|
||||
status = "okay";
|
||||
};
|
||||
Reference in New Issue
Block a user