ARM: dts: rv1109: add rv1109 38 v10 spi nand board support

rv1109-38-v10-spi-nand is a spi nand,rmii gmac phy,os04a10 board.

Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Change-Id: Ie4d3de1f87aee1d630152de95b43714234d32932

arch/arm/boot/dts/Makefile

@@ -842,6 +842,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
 	sh73a0-kzm9g.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rv1108-evb.dtb \
+	rv1109-38-v10-spi-nand.dtb \
 	rv1109-evb-ddr3-v10.dtb \
 	rv1109-evb-ddr3-v12.dtb \
 	rv1109-evb-lp3-v10.dtb \

arch/arm/boot/dts/rv1109-38-v10-spi-nand.dts

@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rv1109.dtsi"
+#include "rv11xx-ipc.dtsi"
+
+/ {
+	model = "Rockchip RV1109 38 V10 SPI NAND DDR3 Board";
+	compatible = "rockchip,rv1109-38-v10-spi-nand", "rockchip,rv1109";
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xff570000 console=ttyFIQ0 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs snd_aloop.index=7";
+	};
+
+	/delete-node/ vdd-npu;
+	/delete-node/ vdd-vepu;
+
+	vcc_1v8: vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_dvdd: vcc-dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_dvdd";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	vcc3v3_sys: vcc33sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vdd_arm: vdd-arm {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		regulator-name = "vdd_arm";
+		regulator-min-microvolt = <720000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-init-microvolt = <825000>;
+		regulator-always-on;
+		regulator-boot-on;
+		pwm-supply = <&vcc3v3_sys>;
+		status = "okay";
+	};
+
+	/*
+	 * pwm1 is reserved as voltage adjustment in hardware
+	 * use fixed regulator to avoid voltage adjustment by software
+	 */
+	vdd_logic_npu_vepu: vdd-logic-npu-vepu {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 1>;
+		regulator-name = "vdd_logic_npu_vepu";
+		regulator-min-microvolt = <720000>;
+		regulator-max-microvolt = <880000>;
+		regulator-init-microvolt = <825000>;
+		regulator-always-on;
+		regulator-boot-on;
+		pwm-supply = <&vcc3v3_sys>;
+		status = "okay";
+	};
+
+	vdd_logic_npu_vepu_fixed: vdd-logic-npu-vepu-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_logic_npu_vepu-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <825000>;
+		regulator-max-microvolt = <825000>;
+	};
+};
+
+&csi_dphy0 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipi_in_ucam0: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&ucam_out0>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+		port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			csidphy0_out: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&isp_in>;
+			};
+		};
+	};
+};
+
+&gmac {
+	phy-mode = "rmii";
+	clock_in_out = "output";
+
+	snps,reset-gpio = <&gpio3 RK_PC5 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 50000 50000>;
+
+	assigned-clocks = <&cru CLK_GMAC_SRC>, <&cru CLK_GMAC_TX_RX>;
+	assigned-clock-parents = <&cru CLK_GMAC_SRC_M0>, <&cru RMII_MODE_CLK>;
+	assigned-clock-rates = <50000000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmiim0_pins &gmac_clk_m0_drv_level0_pins>;
+
+	phy-handle = <&phy>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	os04a10: os04a10@36 {
+		compatible = "ovti,os04a10";
+		reg = <0x36>;
+		clocks = <&cru CLK_MIPICSI_OUT>;
+		clock-names = "xvclk";
+		power-domains = <&power RV1126_PD_VI>;
+		pinctrl-names = "rockchip,camera_default";
+		pinctrl-0 = <&mipicsi_clk0>;
+		avdd-supply = <&vcc3v3_sys>;
+		dovdd-supply = <&vcc_1v8>;
+		dvdd-supply = <&vcc_dvdd>;
+		pwdn-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+		rst-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+		rockchip,camera-module-index = <1>;
+		rockchip,camera-module-facing = "front";
+		rockchip,camera-module-name = "CMK-OT1607-FV1";
+		rockchip,camera-module-lens-name = "M12-4IR-4MP-F16";
+
+		port {
+			ucam_out0: endpoint {
+				remote-endpoint = <&mipi_in_ucam0>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&mdio {
+	phy: phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&nandc {
+	status = "okay";
+};
+
+&npu {
+	npu-supply = <&vdd_logic_npu_vepu_fixed>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+
+	pmuio0-supply = <&vcc3v3_sys>;
+	pmuio1-supply = <&vcc3v3_sys>;
+	vccio1-supply = <&vcc_1v8>;
+	vccio2-supply = <&vcc3v3_sys>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc3v3_sys>;
+	vccio6-supply = <&vcc3v3_sys>;
+	vccio7-supply = <&vcc3v3_sys>;
+};
+
+&rkisp {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			isp_in: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&csidphy0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			isp_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&ispp_in>;
+			};
+		};
+	};
+};
+
+&rkispp {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ispp_in: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&isp_out>;
+		};
+	};
+};
+
+&rkvenc {
+	venc-supply = <&vdd_logic_npu_vepu_fixed>;
+};
+
+&rockchip_suspend {
+	status = "okay";
+	rockchip,sleep-debug-en = <1>;
+	rockchip,sleep-mode-config = <
+		(0
+		| RKPM_SLP_ARMOFF
+		| RKPM_SLP_PMU_PMUALIVE_32K
+		| RKPM_SLP_PMU_DIS_OSC
+		)
+	>;
+};
+
+&sfc {
+	status = "okay";
+};