arm64: dts: rockchip: add rk3358m automotive board support

Change-Id: I48e6d2748f5d7ab2681a8c13c54a92252d56eb59
Signed-off-by: Jianlong Wang <jianlong.wang@rock-chips.com>
This commit is contained in:
Jianlong Wang
2024-11-13 15:15:36 +08:00
committed by Tao Huang
parent fd4dfa23f4
commit a3d08fbcc0
3 changed files with 791 additions and 0 deletions

View File

@@ -47,6 +47,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-pc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3358-evb-ddr3-v10-linux.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3358m-automotive-ddr3-v11-linux.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3358m-vehicle-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb

View File

@@ -0,0 +1,60 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2024 Rockchip Electronics Co., Ltd.
*
*/
/dts-v1/;
#include "rk3358m-automotive-ddr3-v11.dtsi"
#include "rk3358-linux.dtsi"
/ {
model = "Rockchip RK3358M AUTOMOTIVE DDR3 V11 board";
compatible = "rockchip,rk3358m-automotive-ddr3-v11-linux", "rockchip,px30", "rockchip,rk3358";
chosen {
bootargs = "earlycon=uart8250,mmio32,0xff160000 console=ttyFIQ0 skip_initramfs root=/dev/rd0 rootfstype=squashfs init=/sbin/init";
};
/*
* This memory mapping range represents a 512MB memory space
* starting from the physical address 0x00000000
* where:
* 0x00000000 - base address
* 0x0 - address cells
* 0x0 - size cells
* 0x20000000 - memory size (512MB)
* Note: The actual available memory size depends on the hardware design
* and may differ from the 512MB defined here.
* Adjustment is needed based on the specific hardware memory configuration.
*/
memory: memory {
device_type = "memory";
reg = <0x00000000 0x0 0x0 0x20000000>;
};
ramdisk: ramdisk {
compatible = "rockchip,ramdisk";
memory-region = <&ramdisk_r>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
atf: atf@0 {
reg = <0x0 0x00000 0x0 0x200000>;
no-map;
};
mmc_dma_buf@200000 {
reg = <0x0 0x200000 0x0 0x200000>;
};
ramdisk_r: ramdisk_r@4000000 {
/* Do not exceed 132MB which used by TEE */
reg = <0x0 0x4000000 0x0 0x2000000>;
};
};
};

View File

@@ -0,0 +1,730 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2024 Rockchip Electronics Co., Ltd
*
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/display/drm_mipi_dsi.h>
#include "rk3358.dtsi"
/ {
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 2>;
io-channel-names = "buttons";
poll-interval = <100>;
keyup-threshold-microvolt = <1800000>;
vol-down-key {
linux,code = <KEY_VOLUMEDOWN>;
label = "volume down";
press-threshold-microvolt = <300000>;
};
vol-up-key {
linux,code = <KEY_VOLUMEUP>;
label = "volume up";
press-threshold-microvolt = <17000>;
};
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm3 0 10000000 0>;
pinctrl-names = "default";
pinctrl-0 = <&lcd0_pwren &lcd0_rst>;
enable-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_HIGH>;
brightness-levels = <
0 1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 23
24 25 26 27 28 29 30 31
32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47
48 49 50 51 52 53 54 55
56 57 58 59 60 61 62 63
64 65 66 67 68 69 70 71
72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87
88 89 90 91 92 93 94 95
96 97 98 99 100 101 102 103
104 105 106 107 108 109 110 111
112 113 114 115 116 117 118 119
120 121 122 123 124 125 126 127
128 129 130 131 132 133 134 135
136 137 138 139 140 141 142 143
144 145 146 147 148 149 150 151
152 153 154 155 156 157 158 159
160 161 162 163 164 165 166 167
168 169 170 171 172 173 174 175
176 177 178 179 180 181 182 183
184 185 186 187 188 189 190 191
192 193 194 195 196 197 198 199
200 201 202 203 204 205 206 207
208 209 210 211 212 213 214 215
216 217 218 219 220 221 222 223
224 225 226 227 228 229 230 231
232 233 234 235 236 237 238 239
240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>;
default-brightness-level = <60>;
};
/* The THine 827-Q (rgb to dual lvds) don't need driver */
panel_rgb: panel-rgb {
compatible = "simple-panel";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pwdn_rgb>; /* This the pwdn of THine-827-Q */
power-supply = <&vcc3v3_lcd>;
backlight = <&backlight>;
enable-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>;
prepare-delay-ms = <0>;
reset-delay-ms = <0>;
init-delay-ms = <0>;
enable-delay-ms = <5>;
disable-delay-ms = <10>;
unprepare-delay-ms = <0>;
width-mm = <292>;
height-mm = <109>;
bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
display-timings {
native-mode = <&timing1>;
timing1: timing1 {
clock-frequency = <88200000>;
hactive = <1920>;
vactive = <720>;
hfront-porch = <40>;
hsync-len = <20>;
hback-porch = <24>;
vfront-porch = <5>;
vsync-len = <4>;
vback-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <0>;
pixelclk-active = <1>;
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
panel_in_rgb: endpoint@0 {
reg = <0>;
remote-endpoint = <&rgb_out_panel>;
};
};
};
};
rk809_sound: rk809-sound {
status = "okay";
compatible = "rockchip,multicodecs-card";
rockchip,card-name = "rockchip-rk809";
poll-interval = <100>;
rockchip,format = "i2s";
rockchip,mclk-fs = <256>;
rockchip,cpu = <&i2s1_2ch>;
rockchip,codec = <&rk809_codec>;
};
vcc5v0_sys: vcc5v0-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vcc_phy: vcc-phy {
compatible = "regulator-fixed";
regulator-name = "vcc_phy";
regulator-always-on;
regulator-boot-on;
};
/* It's just for compatibility with SDK script checks. */
wireless-bluetooth {
status = "disabled";
};
};
&cpu0 {
cpu-supply = <&vdd_arm>;
};
&dfi {
status = "okay";
};
&display_subsystem {
status = "okay";
};
&dmc {
center-supply = <&vdd_logic>;
status = "okay";
};
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
supports-emmc;
disable-wp;
non-removable;
num-slots = <1>;
status = "okay";
};
&gmac {
phy-supply = <&vcc_phy>;
clock_in_out = "output";
snps,reset-gpio = <&gpio2 12 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 50000 50000>;
status = "okay";
};
&gpu {
mali-supply = <&vdd_logic>;
status = "okay";
};
&hevc {
status = "okay";
};
&hevc_mmu {
status = "okay";
};
&i2c0 {
status = "okay";
clock-frequency = <400000>;
rk809: pmic@20 {
compatible = "rockchip,rk809";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default", "pmic-sleep",
"pmic-power-off", "pmic-reset";
pinctrl-0 = <&pmic_int>;
pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
pinctrl-3 = <&soc_slppin_rst>, <&rk817_slppin_rst>;
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
clock-output-names = "rk808-clkout1", "rk808-clkout2";
//fb-inner-reg-idxs = <2>;
/* 1: rst regs (default in codes), 0: rst the pmic */
pmic-reset-func = <1>;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
vcc3-supply = <&vcc5v0_sys>;
vcc4-supply = <&vcc5v0_sys>;
vcc5-supply = <&vcc3v3_sys>;
vcc6-supply = <&vcc3v3_sys>;
vcc7-supply = <&vcc3v3_sys>;
vcc8-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc5v0_sys>;
pwrkey {
status = "okay";
};
pinctrl_rk8xx: pinctrl_rk8xx {
gpio-controller;
#gpio-cells = <2>;
rk817_slppin_null: rk817_slppin_null {
pins = "gpio_slp";
function = "pin_fun0";
};
rk817_slppin_slp: rk817_slppin_slp {
pins = "gpio_slp";
function = "pin_fun1";
};
rk817_slppin_pwrdn: rk817_slppin_pwrdn {
pins = "gpio_slp";
function = "pin_fun2";
};
rk817_slppin_rst: rk817_slppin_rst {
pins = "gpio_slp";
function = "pin_fun3";
};
};
regulators {
vdd_logic: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_logic";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <950000>;
};
};
vdd_arm: DCDC_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_arm";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <950000>;
};
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_ddr";
regulator-initial-mode = <0x2>;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_3v3: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <0x2>;
regulator-name = "vcc_3v3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_1v0: LDO_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vcc_1v0";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vcc_1v8: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_1v8";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_1v0: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd_1v0";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vcc3v3_pmu: LDO_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc3v3_pmu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3000000>;
};
};
vcc3v3_ser: LDO_REG5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc3v3_ser";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc3v3_deser: LDO_REG6 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-off;
regulator-name = "vcc3v3_deser";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc1v8_thc: LDO_REG7 {
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc1v8_thc";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc1v8_ser: LDO_REG8 {
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc1v8_ser";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd1v2_ser: LDO_REG9 {
regulator-boot-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vdd1v2_ser";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <1200000>;
};
};
vcc3v3_sys: DCDC_REG5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc3v3_sys";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc5v0_host: SWITCH_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc5v0_host";
};
vcc3v3_lcd: SWITCH_REG2 {
regulator-boot-on;
regulator-name = "vcc3v3_lcd";
};
};
rk809_codec: codec {
#sound-dai-cells = <0>;
compatible = "rockchip,rk809-codec", "rockchip,rk817-codec";
clocks = <&cru SCLK_I2S1_OUT>;
clock-names = "mclk";
pinctrl-names = "default";
pinctrl-0 = <&i2s1_2ch_mclk>;
hp-volume = <20>;
spk-volume = <3>;
status = "okay";
};
};
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
/* These are relatively safe rise/fall times; TODO: measure */
i2c-scl-falling-time-ns = <50>;
i2c-scl-rising-time-ns = <300>;
};
&i2c2 {
status = "okay";
clock-frequency = <400000>;
};
&i2s1_2ch {
status = "okay";
#sound-dai-cells = <0>;
};
&io_domains {
status = "okay";
vccio1-supply = <&vcc_3v3>;
vccio2-supply = <&vcc_3v3>;
vccio3-supply = <&vcc_3v3>;
vccio4-supply = <&vcc3v3_pmu>;
vccio5-supply = <&vcc3v3_pmu>;
};
&isp_mmu {
status = "okay";
};
&mipi_dphy_rx0 {
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
mipi_in_ucam: endpoint@1 {
reg = <1>;
// remote-endpoint = <&ucam_out>;
data-lanes = <1 2>;
};
};
port@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
dphy_rx0_out: endpoint@0 {
reg = <0>;
remote-endpoint = <&isp0_mipi_in>;
};
};
};
};
&mpp_srv {
status = "okay";
};
&pinctrl {
lcd {
lcd0_pwren: lcd0-pwren {
rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_output_high>;
};
lcd0_rst: lcd0-rst {
rockchip,pins = <1 RK_PD7 RK_FUNC_GPIO &pcfg_output_high>;
};
pwdn_rgb: pwdn-rgb {
rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_output_high>;
};
};
pmic {
pmic_int: pmic_int {
rockchip,pins =
<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
};
soc_slppin_gpio: soc_slppin_gpio {
rockchip,pins =
<0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
};
soc_slppin_slp: soc_slppin_slp {
rockchip,pins =
<0 RK_PA4 1 &pcfg_pull_none>;
};
soc_slppin_rst: soc_slppin_rst {
rockchip,pins =
<0 RK_PA4 2 &pcfg_pull_none>;
};
};
};
&pmu_io_domains {
status = "okay";
pmuio1-supply = <&vcc3v3_pmu>;
pmuio2-supply = <&vcc3v3_pmu>;
};
&pwm1 {
status = "okay";
};
&pwm3 {
status = "okay";
};
&rgb {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
/delete-property/ phys;
/delete-property/ phy-names;
pinctrl-0 = <&lcdc_m0_rgb_pins>;
pinctrl-1 = <&lcdc_m0_sleep_pins>;
ports {
port@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
rgb_out_panel: endpoint@0 {
reg = <0>;
remote-endpoint = <&panel_in_rgb>;
};
};
};
};
&rgb_in_vopb {
status = "okay";
};
&rgb_in_vopl {
status = "disabled";
};
&rk_rga {
status = "okay";
};
&rkisp1 {
status = "okay";
port {
#address-cells = <1>;
#size-cells = <0>;
isp0_mipi_in: endpoint@0 {
reg = <0>;
remote-endpoint = <&dphy_rx0_out>;
};
};
};
&route_rgb {
connect = <&vopb_out_rgb>;
status = "okay";
};
&saradc {
status = "okay";
vref-supply = <&vcc_1v8>;
};
&spi0 {
status = "okay";
};
&tsadc {
pinctrl-names = "gpio", "otpout";
pinctrl-0 = <&tsadc_otp_gpio>;
pinctrl-1 = <&tsadc_otp_out>;
status = "okay";
};
&u2phy {
status = "okay";
u2phy_host: host-port {
status = "okay";
phy-supply = <&vcc5v0_host>;
};
u2phy_otg: otg-port {
status = "okay";
};
};
&usb20_otg {
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&vdpu {
status = "okay";
};
&vepu {
status = "okay";
};
&vopb {
status = "okay";
};
&vopb_mmu {
status = "okay";
};
&vopl {
status = "okay";
};
&vopl_mmu {
status = "okay";
};
&vpu_mmu {
status = "okay";
};