mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-06 10:58:48 +09:00
arm64: dts: rockchip: rk3562-evb2: add fast image reverse support
Change-Id: Ic240f2680e221aaadf40303d3367fcf604e03100 Signed-off-by: Jianwei Fan <jianwei.fan@rock-chips.com>
This commit is contained in:
Jianwei Fan
@@ -85,6 +85,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3562-evb1-lp4x-v10-rgb-FX070-DHM11BOE-A.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3562-evb1-lp4x-v10-spdif.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3562-evb2-ddr4-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3562-evb2-ddr4-v10-dual-camera.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3562-evb2-ddr4-v10-image-reverse.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3562-evb2-ddr4-v10-linux.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3562-evb2-ddr4-v10-pdm-mic-array.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3562-evb2-ddr4-v10-sii9022-bt1120-to-hdmi.dtb
|
||||
|
||||
@@ -0,0 +1,11 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2022 Rockchip Electronics Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "rk3562-evb2-ddr4-v10.dtsi"
|
||||
#include "rk3562-android.dtsi"
|
||||
#include "rk3562-rk809.dtsi"
|
||||
#include "rk3562-evb2-nvp6324.dtsi"
|
||||
#include "rk3562-evb2-image-reverse.dtsi"
|
||||
171
arch/arm64/boot/dts/rockchip/rk3562-evb2-image-reverse.dtsi
Normal file
171
arch/arm64/boot/dts/rockchip/rk3562-evb2-image-reverse.dtsi
Normal file
@@ -0,0 +1,171 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2022 Rockchip Electronics Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
/{
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
drm_vehicle: drm-vehicle@0{
|
||||
compatible = "shared-dma-pool";
|
||||
inactive;
|
||||
reusable;
|
||||
reg = <0x0 (512 * 0x100000) 0x0 (256 * 0x100000)>;//512M ~ 512M+256M
|
||||
linux,cma-default;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_det: gpio-det {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vehicle_gpios>;
|
||||
|
||||
/*if use the reverse, please config this*/
|
||||
car-reverse {
|
||||
car-reverse-gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>;
|
||||
linux,debounce-ms = <5>;
|
||||
label = "car-reverse";
|
||||
gpio,wakeup;
|
||||
};
|
||||
};
|
||||
|
||||
vehicle: vehicle {
|
||||
compatible = "rockchip,vehicle";
|
||||
status = "okay";
|
||||
|
||||
// pinctrl-names = "default";
|
||||
// pinctrl-0 = <&camm0_clk0_out>;
|
||||
|
||||
clocks = <&cru ACLK_VICAP>,
|
||||
<&cru HCLK_VICAP>,
|
||||
<&cru DCLK_VICAP>,
|
||||
<&cru CSIRX0_CLK_DATA>,
|
||||
<&cru CSIRX1_CLK_DATA>,
|
||||
<&cru CSIRX2_CLK_DATA>,
|
||||
<&cru CSIRX3_CLK_DATA>;
|
||||
clock-names = "aclk_cif",
|
||||
"hclk_cif",
|
||||
"dclk_cif",
|
||||
"csirx0_data",
|
||||
"csirx1_data",
|
||||
"csirx2_data",
|
||||
"csirx3_data";
|
||||
resets = <&cru SRST_A_VICAP>,
|
||||
<&cru SRST_H_VICAP>,
|
||||
<&cru SRST_D_VICAP>,
|
||||
<&cru SRST_I0_VICAP>,
|
||||
<&cru SRST_I1_VICAP>,
|
||||
<&cru SRST_I2_VICAP>,
|
||||
<&cru SRST_I3_VICAP>;
|
||||
reset-names = "rst_cif_a",
|
||||
"rst_cif_h",
|
||||
"rst_cif_d",
|
||||
"rst_cif_i0",
|
||||
"rst_cif_i1",
|
||||
"rst_cif_i2",
|
||||
"rst_cif_i3";
|
||||
power-domains = <&power RK3562_PD_VI>;
|
||||
cif,drop-frames = <4>; //frames to drop
|
||||
cif,chip-id = <2>; /*0:rk3568 1:rk3588 2:rk3562*/
|
||||
rockchip,grf = <&sys_grf>;
|
||||
rockchip,cru = <&cru>;
|
||||
rockchip,cif = <&rkcif>;
|
||||
rockchip,gpio-det = <&gpio_det>;
|
||||
rockchip,cif-sensor = <&cif_sensor>;
|
||||
rockchip,cif-phy = <&cif_phy>;
|
||||
ad,fix-format = <0>;//0:auto detect,1:pal;2:ntsc;3:720p50;4:720p30;5:720p25
|
||||
/*0:no, 1:90; 2:180; 4:270; 0x10:mirror-y; 0x20:mirror-x*/
|
||||
vehicle,rotate-mirror = <0x00>;
|
||||
vehicle,crtc_name = "video_port0";
|
||||
vehicle,plane_name = "Esmart0-win0";
|
||||
};
|
||||
|
||||
cif_phy: cif_phy {
|
||||
status = "okay";
|
||||
|
||||
csi2_dphy0 {
|
||||
status = "okay";
|
||||
clocks = <&cru CLK_CAM0_OUT2IO>,
|
||||
<&cru PCLK_CSIPHY0>,
|
||||
<&cru PCLK_CSIHOST0>;
|
||||
clock-names = "xvclk",
|
||||
"pclk",
|
||||
"pclk_csi2host";
|
||||
resets = <&cru SRST_P_CSIPHY0>,
|
||||
<&cru SRST_P_CSIHOST0>;
|
||||
reset-names = "srst_p_csiphy",
|
||||
"srst_csihost_p";
|
||||
csihost-idx = <0>;
|
||||
rockchip,csi2-dphy = <&csi2_dphy0_hw>;
|
||||
rockchip,csi2 = <&mipi0_csi2>;
|
||||
};
|
||||
csi2_dphy3 {
|
||||
status = "disabled";
|
||||
clocks = <&cru CLK_CAM2_OUT2IO>,
|
||||
<&cru PCLK_CSIPHY1>,
|
||||
<&cru PCLK_CSIHOST2>;
|
||||
clock-names = "xvclk",
|
||||
"pclk",
|
||||
"pclk_csi2host";
|
||||
resets = <&cru SRST_P_CSIPHY1>,
|
||||
<&cru SRST_P_CSIHOST2>;
|
||||
reset-names = "srst_p_csiphy",
|
||||
"srst_csihost_p";
|
||||
csihost-idx = <2>;
|
||||
rockchip,csi2-dphy = <&csi2_dphy1_hw>;
|
||||
rockchip,csi2 = <&mipi2_csi2>;
|
||||
};
|
||||
};
|
||||
|
||||
cif_sensor: cif_sensor {
|
||||
compatible = "rockchip,sensor";
|
||||
status = "okay";
|
||||
|
||||
nvp6324 {
|
||||
status = "okay";
|
||||
// dphy0
|
||||
powerdown-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
pwdn_active = <1>;
|
||||
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
rst_active = <1>;
|
||||
// dphy3
|
||||
// powerdown-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
// pwdn_active = <1>;
|
||||
// reset-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
// rst_active = <1>;
|
||||
|
||||
orientation = <90>;
|
||||
i2c_add = <0x60>;
|
||||
i2c_chl = <4>;
|
||||
cif_chl = <0>;
|
||||
ad_chl = <0>;
|
||||
mclk_rate = <24>;
|
||||
rockchip,camera-module-defrect0 = <1920 1080 0 0 1920 1080>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&display_subsystem {
|
||||
memory-region = <&drm_logo>, <&drm_vehicle>;
|
||||
memory-region-names = "drm-logo", "drm-vehicle";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
vehicle {
|
||||
vehicle_gpios: vehicle-pins {
|
||||
/* gpios */
|
||||
rockchip,pins =
|
||||
/* car-reverse */
|
||||
<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
140
arch/arm64/boot/dts/rockchip/rk3562-evb2-nvp6324.dtsi
Normal file
140
arch/arm64/boot/dts/rockchip/rk3562-evb2-nvp6324.dtsi
Normal file
@@ -0,0 +1,140 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2023 Rockchip Electronics Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
/ {
|
||||
vcc_mipicsi0: vcc-mipicsi0-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
gpio = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mipicsi0_pwr>;
|
||||
regulator-name = "vcc_mipicsi0";
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&csi2_dphy0 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
mipi_in_ucam0: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&n4_out>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
csidphy0_out: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&mipi0_csi2_input>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
|
||||
jaguar1: jaguar1@30 {
|
||||
compatible = "jaguar1-v4l2";
|
||||
status = "okay";
|
||||
reg = <0x30>;
|
||||
clocks = <&cru CLK_CAM0_OUT2IO>;
|
||||
clock-names = "xvclk";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&camm0_clk0_out>;
|
||||
pd-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
rst-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
rockchip,camera-module-index = <0>;
|
||||
rockchip,camera-module-facing = "back";
|
||||
rockchip,camera-module-name = "jaguar1";
|
||||
rockchip,camera-module-lens-name = "jaguar1";
|
||||
rockchip,default_rect= <1920 1080>; // default resolution
|
||||
port {
|
||||
n4_out: endpoint {
|
||||
remote-endpoint = <&mipi_in_ucam0>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&csi2_dphy0_hw {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mipi0_csi2 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
mipi0_csi2_input: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&csidphy0_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
mipi0_csi2_output: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&cif_mipi_in0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rkcif {
|
||||
status = "okay";
|
||||
rockchip,android-usb-camerahal-enable;
|
||||
};
|
||||
|
||||
&rkcif_mipi_lvds {
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
cif_mipi_in0: endpoint {
|
||||
remote-endpoint = <&mipi0_csi2_output>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rkcif_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
cam {
|
||||
mipicsi0_pwr: mipicsi0-pwr {
|
||||
rockchip,pins =
|
||||
/* camera power en */
|
||||
<4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
Reference in New Issue
Block a user