mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-07 11:26:02 +09:00
arm64: dts: rockchip: add dts file for rk3566-evb5
Signed-off-by: Luo Wei <lw@rock-chips.com> Change-Id: I3eeb023b7ce622acd8ed151f0948489d5cd07ad8
This commit is contained in:
Luo Wei
@@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-evb2-lp4x-v10-i2s-mic-array.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-evb2-lp4x-v10-pdm-mic-array.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-evb3-ddr3-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-evb3-ddr3-v10-linux.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-evb5-lp4x-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-rk817-eink.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-rk817-tablet.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-rk817-tablet-k108.dtb
|
||||
|
||||
7
arch/arm64/boot/dts/rockchip/rk3566-evb5-lp4x-v10.dts
Normal file
7
arch/arm64/boot/dts/rockchip/rk3566-evb5-lp4x-v10.dts
Normal file
@@ -0,0 +1,7 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2020 Rockchip Electronics Co., Ltd.
|
||||
*/
|
||||
|
||||
#include "rk3566-evb5-lp4x-v10.dtsi"
|
||||
#include "rk3568-android.dtsi"
|
||||
318
arch/arm64/boot/dts/rockchip/rk3566-evb5-lp4x-v10.dtsi
Normal file
318
arch/arm64/boot/dts/rockchip/rk3566-evb5-lp4x-v10.dtsi
Normal file
@@ -0,0 +1,318 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2020 Rockchip Electronics Co., Ltd.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3566.dtsi"
|
||||
#include "rk3566-evb.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3566 EVB5 LP4X V10 Board";
|
||||
compatible = "rockchip,rk3566-evb5-lp4x-v10", "rockchip,rk3568";
|
||||
|
||||
pcie20_3v3: gpio-regulator {
|
||||
compatible = "regulator-gpio";
|
||||
regulator-name = "pcie20_3v3";
|
||||
regulator-min-microvolt = <0100000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <0x1>;
|
||||
states = <0100000 0x0
|
||||
3300000 0x1>;
|
||||
};
|
||||
|
||||
rk_headset: rk-headset {
|
||||
compatible = "rockchip_headset";
|
||||
headset_gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hp_det>;
|
||||
};
|
||||
|
||||
vcc3v3_vga: vcc3v3-vga {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_vga";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&audiopwmout_diff {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&combphy1_usq {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2_psq {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&dig_acodec {
|
||||
status = "disabled";
|
||||
rockchip,pwm-output-mode;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&audiopwm_loutp
|
||||
&audiopwm_loutn
|
||||
&audiopwm_routp
|
||||
&audiopwm_routn
|
||||
>;
|
||||
};
|
||||
|
||||
/*
|
||||
* mipi_dphy0 needs to be enabled
|
||||
* when dsi0 is enabled
|
||||
*/
|
||||
&dsi0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi0_in_vp0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi0_in_vp1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&dsi0_panel {
|
||||
power-supply = <&vcc3v3_lcd0_n>;
|
||||
reset-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcd0_rst_gpio>;
|
||||
};
|
||||
|
||||
/*
|
||||
* mipi_dphy1 needs to be enabled
|
||||
* when dsi1 is enabled
|
||||
*/
|
||||
&dsi1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&dsi1_in_vp0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&dsi1_in_vp1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&dsi1_panel {
|
||||
power-supply = <&vcc3v3_lcd1_n>;
|
||||
reset-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcd1_rst_gpio>;
|
||||
};
|
||||
|
||||
&edp {
|
||||
hpd-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&edp_phy {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&edp_in_vp0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&edp_in_vp1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "output";
|
||||
|
||||
snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 20ms, 100ms for rtl8211f */
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
|
||||
assigned-clock-rates = <0>, <125000000>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m0_miim
|
||||
&gmac1m0_tx_bus2
|
||||
&gmac1m0_rx_bus2
|
||||
&gmac1m0_rgmii_clk
|
||||
&gmac1m0_rgmii_bus>;
|
||||
|
||||
tx_delay = <0x59>;
|
||||
rx_delay = <0x2e>;
|
||||
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* power-supply should switche to vcc3v3_lcd1_n
|
||||
* when mipi panel is connected to dsi1.
|
||||
*/
|
||||
>1x {
|
||||
power-supply = <&vcc3v3_lcd0_n>;
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
rockchip,phy-table =
|
||||
<92812500 0x8009 0x0000 0x0270>,
|
||||
<165000000 0x800b 0x0000 0x026d>,
|
||||
<185625000 0x800b 0x0000 0x01ed>,
|
||||
<297000000 0x800b 0x0000 0x01ad>,
|
||||
<594000000 0x8029 0x0000 0x0088>,
|
||||
<000000000 0x0000 0x0000 0x0000>;
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&i2s3_2ch {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&mipi_dphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mipi_dphy1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pcie2x1 {
|
||||
reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&pcie20_3v3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pdm {
|
||||
status = "disabled";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pdmm1_clk1
|
||||
&pdmm1_sdi1
|
||||
&pdmm1_sdi2
|
||||
&pdmm1_sdi3>;
|
||||
};
|
||||
|
||||
&pdmics {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pdm_mic_array {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sdmmc2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn>;
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&uart7 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&vcc3v3_lcd0_n {
|
||||
gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
&vcc3v3_lcd1_n {
|
||||
gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
&wireless_bluetooth {
|
||||
uart_rts_gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default", "rts_gpio";
|
||||
pinctrl-0 = <&uart1m1_rtsn>;
|
||||
pinctrl-1 = <&uart1_gpios>;
|
||||
BT,reset_gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_gpio = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_host_irq = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&wireless_wlan {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_irq>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
headphone {
|
||||
hp_det: hp-det {
|
||||
rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
lcd0 {
|
||||
lcd0_rst_gpio: lcd0-rst-gpio {
|
||||
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
lcd1 {
|
||||
lcd1_rst_gpio: lcd1-rst-gpio {
|
||||
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
wifi_host_wake_irq: wifi-host-wake-irq {
|
||||
rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
uart1_gpios: uart1-gpios {
|
||||
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user