ARM: dts: rockchip: add dts for rv1106 uvc demo board

Signed-off-by: Huang zhibao <hzb@rock-chips.com>
Change-Id: Ida1820188cb5b293f5a9a6dda7b1da88193bd895
This commit is contained in:
Huang zhibao
2022-03-30 16:30:46 +08:00
committed by Tao Huang
parent e8c0569ca5
commit ff0bc31061
5 changed files with 200 additions and 0 deletions

View File

@@ -978,6 +978,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rv1106g-evb1-v10-spi-nand.dtb \
rv1106g-evb1-v10-spi-nor.dtb \
rv1106g-evb2-v10.dtb \
rv1106g-uvc-demo-v10.dtb \
rv1106g-uvc-demo-v10-spi-nor.dtb \
rv1108-elgin-r1.dtb \
rv1108-evb.dtb \
rk3036-evb.dtb \

View File

@@ -0,0 +1,64 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2022 Rockchip Electronics Co., Ltd.
*/
#include "rv1106-uvc.dtsi"
#include "rv1106-evb-cam.dtsi"
/ {
chosen {
bootargs = "clk_gate.always_on=1 earlycon=uart8250,mmio32,0xff4c0000 console=ttyFIQ0 root=/dev/mmcblk0p5 rootfstype=ext4 rootwait snd_soc_core.prealloc_buffer_size_kbytes=16";
};
acodec_sound: acodec-sound {
compatible = "simple-audio-card";
simple-audio-card,name = "rv1106-acodec";
simple-audio-card,format = "i2s";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,cpu {
sound-dai = <&i2s0_8ch>;
};
simple-audio-card,codec {
sound-dai = <&acodec>;
};
};
vdd_arm: vdd-arm {
compatible = "pwm-regulator";
pwms = <&pwm0 0 5000 1>;
regulator-name = "vdd_arm";
regulator-min-microvolt = <724000>;
regulator-max-microvolt = <1078000>;
regulator-init-microvolt = <950000>;
regulator-always-on;
regulator-boot-on;
regulator-settling-time-up-us = <250>;
};
};
&acodec {
#sound-dai-cells = <0>;
//pa-ctl-gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&cpu0 {
cpu-supply = <&vdd_arm>;
};
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
non-removable;
mmc-hs200-1_8v;
rockchip,default-sample-phase = <90>;
no-sdio;
no-sd;
status = "okay";
};
&pwm0 {
status = "okay";
};

View File

@@ -0,0 +1,66 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2022 Rockchip Electronics Co., Ltd.
*/
/ {
};
&fiq_debugger {
rockchip,irq-mode-enable = <1>;
status = "okay";
};
&i2s0_8ch {
status = "okay";
};
&mpp_srv {
status = "okay";
};
&mpp_vcodec {
status = "okay";
};
&npu {
status = "okay";
};
&rga2 {
status = "okay";
};
&rkvenc {
status = "okay";
};
&rkvenc_pp {
status = "okay";
};
&rng {
status = "okay";
};
&rve {
status = "okay";
};
&u2phy {
status = "okay";
};
&u2phy_otg {
status = "okay";
};
&usbdrd {
status = "okay";
};
&usbdrd_dwc3 {
dr_mode = "peripheral";
status = "okay";
};

View File

@@ -0,0 +1,52 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2022 Rockchip Electronics Co., Ltd.
*/
/dts-v1/;
#include "rv1106.dtsi"
#include "rv1106-uvc-demo.dtsi"
/ {
model = "Rockchip RV1106 UVC SPI-NOR V10 Board";
compatible = "rockchip,rv1106-uvc-nor-demo", "rockchip,rv1106";
chosen {
bootargs = "earlycon=uart8250,mmio32,0xff4c0000 console=ttyFIQ0 rootwait snd_soc_core.prealloc_buffer_size_kbytes=16";
};
vcc_1v8: vcc-1v8 {
compatible = "regulator-fixed";
regulator-name = "vcc_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vcc_3v3: vcc-3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc_3v3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
&emmc {
status = "disabled";
};
&sfc {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <100000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <1>;
};
};

View File

@@ -0,0 +1,16 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2022 Rockchip Electronics Co., Ltd.
*/
/dts-v1/;
#include "rv1106.dtsi"
#include "rv1106-uvc-demo.dtsi"
/ {
model = "Rockchip RV1106 UVC EMMC V10 Board";
compatible = "rockchip,rv1106-uvc-demo", "rockchip,rv1106";
};