Changes in 4.19.191
s390/disassembler: increase ebpf disasm buffer size
ACPI: custom_method: fix potential use-after-free issue
ACPI: custom_method: fix a possible memory leak
ftrace: Handle commands when closing set_ftrace_filter file
ARM: 9056/1: decompressor: fix BSS size calculation for LLVM ld.lld
arm64: dts: marvell: armada-37xx: add syscon compatible to NB clk node
arm64: dts: mt8173: fix property typo of 'phys' in dsi node
ecryptfs: fix kernel panic with null dev_name
mtd: spinand: core: add missing MODULE_DEVICE_TABLE()
mtd: rawnand: atmel: Update ecc_stats.corrected counter
spi: spi-ti-qspi: Free DMA resources
scsi: qla2xxx: Fix crash in qla2xxx_mqueuecommand()
mmc: sdhci-pci: Fix initialization of some SD cards for Intel BYT-based controllers
mmc: block: Update ext_csd.cache_ctrl if it was written
mmc: block: Issue a cache flush only when it's enabled
mmc: core: Do a power cycle when the CMD11 fails
mmc: core: Set read only for SD cards with permanent write protect bit
erofs: add unsupported inode i_format check
cifs: Return correct error code from smb2_get_enc_key
btrfs: fix metadata extent leak after failure to create subvolume
intel_th: pci: Add Rocket Lake CPU support
fbdev: zero-fill colormap in fbcmap.c
staging: wimax/i2400m: fix byte-order issue
crypto: api - check for ERR pointers in crypto_destroy_tfm()
usb: gadget: uvc: add bInterval checking for HS mode
genirq/matrix: Prevent allocation counter corruption
usb: gadget: f_uac1: validate input parameters
usb: dwc3: gadget: Ignore EP queue requests during bus reset
usb: xhci: Fix port minor revision
PCI: PM: Do not read power state in pci_enable_device_flags()
x86/build: Propagate $(CLANG_FLAGS) to $(REALMODE_FLAGS)
tee: optee: do not check memref size on return from Secure World
perf/arm_pmu_platform: Fix error handling
usb: xhci-mtk: support quirk to disable usb2 lpm
xhci: check control context is valid before dereferencing it.
xhci: fix potential array out of bounds with several interrupters
spi: dln2: Fix reference leak to master
spi: omap-100k: Fix reference leak to master
intel_th: Consistency and off-by-one fix
phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()
btrfs: convert logic BUG_ON()'s in replace_path to ASSERT()'s
scsi: lpfc: Fix incorrect dbde assignment when building target abts wqe
scsi: lpfc: Fix pt2pt connection does not recover after LOGO
scsi: target: pscsi: Fix warning in pscsi_complete_cmd()
media: ite-cir: check for receive overflow
media: drivers: media: pci: sta2x11: fix Kconfig dependency on GPIOLIB
power: supply: bq27xxx: fix power_avg for newer ICs
extcon: arizona: Fix some issues when HPDET IRQ fires after the jack has been unplugged
media: media/saa7164: fix saa7164_encoder_register() memory leak bugs
media: gspca/sq905.c: fix uninitialized variable
power: supply: Use IRQF_ONESHOT
drm/amdgpu : Fix asic reset regression issue introduce by 8f211fe8ac
scsi: qla2xxx: Always check the return value of qla24xx_get_isp_stats()
scsi: qla2xxx: Fix use after free in bsg
scsi: scsi_dh_alua: Remove check for ASC 24h in alua_rtpg()
media: em28xx: fix memory leak
media: vivid: update EDID
clk: socfpga: arria10: Fix memory leak of socfpga_clk on error return
power: supply: generic-adc-battery: fix possible use-after-free in gab_remove()
power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove()
media: tc358743: fix possible use-after-free in tc358743_remove()
media: adv7604: fix possible use-after-free in adv76xx_remove()
media: i2c: adv7511-v4l2: fix possible use-after-free in adv7511_remove()
media: i2c: adv7842: fix possible use-after-free in adv7842_remove()
media: dvb-usb: fix memory leak in dvb_usb_adapter_init
media: gscpa/stv06xx: fix memory leak
drm/msm/mdp5: Configure PP_SYNC_HEIGHT to double the vtotal
amdgpu: avoid incorrect %hu format string
drm/amdgpu: fix NULL pointer dereference
scsi: lpfc: Fix crash when a REG_RPI mailbox fails triggering a LOGO response
scsi: lpfc: Remove unsupported mbox PORT_CAPABILITIES logic
scsi: libfc: Fix a format specifier
s390/archrandom: add parameter check for s390_arch_random_generate
ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer
ALSA: hda/conexant: Re-order CX5066 quirk table entries
ALSA: sb: Fix two use after free in snd_sb_qsound_build
ALSA: usb-audio: Explicitly set up the clock selector
ALSA: usb-audio: More constifications
ALSA: usb-audio: Add dB range mapping for Sennheiser Communications Headset PC 8
ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx
btrfs: fix race when picking most recent mod log operation for an old root
arm64/vdso: Discard .note.gnu.property sections in vDSO
ubifs: Only check replay with inode type to judge if inode linked
f2fs: fix to avoid out-of-bounds memory access
mlxsw: spectrum_mr: Update egress RIF list before route's action
openvswitch: fix stack OOB read while fragmenting IPv4 packets
ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
NFS: Don't discard pNFS layout segments that are marked for return
NFSv4: Don't discard segments marked for return in _pnfs_return_layout()
jffs2: Fix kasan slab-out-of-bounds problem
powerpc/eeh: Fix EEH handling for hugepages in ioremap space.
powerpc: fix EDEADLOCK redefinition error in uapi/asm/errno.h
intel_th: pci: Add Alder Lake-M support
tpm: vtpm_proxy: Avoid reading host log when using a virtual device
md/raid1: properly indicate failure when ending a failed write request
dm raid: fix inconclusive reshape layout on fast raid4/5/6 table reload sequences
security: commoncap: fix -Wstringop-overread warning
Fix misc new gcc warnings
jffs2: check the validity of dstlen in jffs2_zlib_compress()
Revert 337f13046f ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op")
posix-timers: Preserve return value in clock_adjtime32()
arm64: vdso: remove commas between macro name and arguments
ext4: fix check to prevent false positive report of incorrect used inodes
ext4: do not set SB_ACTIVE in ext4_orphan_cleanup()
ext4: fix error code in ext4_commit_super
media: dvbdev: Fix memory leak in dvb_media_device_free()
usb: gadget: dummy_hcd: fix gpf in gadget_setup
usb: gadget: Fix double free of device descriptor pointers
usb: gadget/function/f_fs string table fix for multiple languages
usb: dwc3: gadget: Fix START_TRANSFER link state check
usb: dwc2: Fix session request interrupt handler
tty: fix memory leak in vc_deallocate
rsi: Use resume_noirq for SDIO
tracing: Map all PIDs to command lines
tracing: Restructure trace_clock_global() to never block
dm persistent data: packed struct should have an aligned() attribute too
dm space map common: fix division bug in sm_ll_find_free_block()
dm rq: fix double free of blk_mq_tag_set in dev remove after table load fails
modules: mark ref_module static
modules: mark find_symbol static
modules: mark each_symbol_section static
modules: unexport __module_text_address
modules: unexport __module_address
modules: rename the licence field in struct symsearch to license
modules: return licensing information from find_symbol
modules: inherit TAINT_PROPRIETARY_MODULE
Bluetooth: verify AMP hci_chan before amp_destroy
hsr: use netdev_err() instead of WARN_ONCE()
bluetooth: eliminate the potential race condition when removing the HCI controller
net/nfc: fix use-after-free llcp_sock_bind/connect
ASoC: samsung: tm2_wm5110: check of of_parse return value
MIPS: pci-mt7620: fix PLL lock check
MIPS: pci-rt2880: fix slot 0 configuration
FDDI: defxx: Bail out gracefully with unassigned PCI resource for CSR
iio:accel:adis16201: Fix wrong axis assignment that prevents loading
misc: lis3lv02d: Fix false-positive WARN on various HP models
misc: vmw_vmci: explicitly initialize vmci_notify_bm_set_msg struct
misc: vmw_vmci: explicitly initialize vmci_datagram payload
md/bitmap: wait for external bitmap writes to complete during tear down
md-cluster: fix use-after-free issue when removing rdev
md: split mddev_find
md: factor out a mddev_find_locked helper from mddev_find
md: md_open returns -EBUSY when entering racing area
md: Fix missing unused status line of /proc/mdstat
ipw2x00: potential buffer overflow in libipw_wx_set_encodeext()
cfg80211: scan: drop entry from hidden_list on overflow
drm/radeon: fix copy of uninitialized variable back to userspace
ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries
ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries
ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries
ALSA: hda/realtek: Re-order ALC269 HP quirk table entries
ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries
ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries
ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries
ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices
x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported
KVM: s390: split kvm_s390_logical_to_effective
KVM: s390: fix guarded storage control register handling
KVM: s390: split kvm_s390_real_to_abs
ovl: fix missing revert_creds() on error path
usb: gadget: pch_udc: Revert d3cb25a121 completely
memory: gpmc: fix out of bounds read and dereference on gpmc_cs[]
ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas family
ARM: dts: exynos: correct MUIC interrupt trigger level on Midas family
ARM: dts: exynos: correct PMIC interrupt trigger level on Midas family
ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 family
ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250
ARM: dts: exynos: correct PMIC interrupt trigger level on Snow
serial: stm32: fix incorrect characters on console
serial: stm32: fix tx_empty condition
usb: typec: tcpci: Check ROLE_CONTROL while interpreting CC_STATUS
regmap: set debugfs_name to NULL after it is freed
mtd: rawnand: fsmc: Fix error code in fsmc_nand_probe()
mtd: rawnand: brcmnand: fix OOB R/W with Hamming ECC
mtd: Handle possible -EPROBE_DEFER from parse_mtd_partitions()
mtd: rawnand: qcom: Return actual error code instead of -ENODEV
x86/microcode: Check for offline CPUs before requesting new microcode
usb: gadget: pch_udc: Replace cpu_to_le32() by lower_32_bits()
usb: gadget: pch_udc: Check if driver is present before calling ->setup()
usb: gadget: pch_udc: Check for DMA mapping error
crypto: qat - don't release uninitialized resources
crypto: qat - ADF_STATUS_PF_RUNNING should be set after adf_dev_init
fotg210-udc: Fix DMA on EP0 for length > max packet size
fotg210-udc: Fix EP0 IN requests bigger than two packets
fotg210-udc: Remove a dubious condition leading to fotg210_done
fotg210-udc: Mask GRP2 interrupts we don't handle
fotg210-udc: Don't DMA more than the buffer can take
fotg210-udc: Complete OUT requests on short packets
mtd: require write permissions for locking and badblock ioctls
bus: qcom: Put child node before return
soundwire: bus: Fix device found flag correctly
phy: marvell: ARMADA375_USBCLUSTER_PHY should not default to y, unconditionally
crypto: qat - fix error path in adf_isr_resource_alloc()
usb: gadget: aspeed: fix dma map failure
USB: gadget: udc: fix wrong pointer passed to IS_ERR() and PTR_ERR()
soundwire: stream: fix memory leak in stream config error path
mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init
irqchip/gic-v3: Fix OF_BAD_ADDR error handling
staging: rtl8192u: Fix potential infinite loop
staging: greybus: uart: fix unprivileged TIOCCSERIAL
spi: Fix use-after-free with devm_spi_alloc_*
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: mdt_loader: Detect truncated read of segments
ACPI: CPPC: Replace cppc_attr with kobj_attribute
crypto: qat - Fix a double free in adf_create_ring
cpufreq: armada-37xx: Fix setting TBG parent for load levels
clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
cpufreq: armada-37xx: Fix the AVS value for load L1
clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
cpufreq: armada-37xx: Fix driver cleanup when registration failed
cpufreq: armada-37xx: Fix determining base CPU frequency
usb: gadget: r8a66597: Add missing null check on return from platform_get_resource
USB: cdc-acm: fix unprivileged TIOCCSERIAL
tty: actually undefine superseded ASYNC flags
tty: fix return value for unsupported ioctls
firmware: qcom-scm: Fix QCOM_SCM configuration
usbip: vudc: fix missing unlock on error in usbip_sockfd_store()
platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with critclk_systems DMI table
x86/platform/uv: Fix !KEXEC build failure
Drivers: hv: vmbus: Increase wait time for VMbus unload
usb: dwc2: Fix host mode hibernation exit with remote wakeup flow.
usb: dwc2: Fix hibernation between host and device modes.
ttyprintk: Add TTY hangup callback.
soc: aspeed: fix a ternary sign expansion bug
media: vivid: fix assignment of dev->fbuf_out_flags
media: omap4iss: return error code when omap4iss_get() failed
media: m88rs6000t: avoid potential out-of-bounds reads on arrays
drm/amdkfd: fix build error with AMD_IOMMU_V2=m
x86/kprobes: Fix to check non boostable prefixes correctly
pata_arasan_cf: fix IRQ check
pata_ipx4xx_cf: fix IRQ check
sata_mv: add IRQ checks
ata: libahci_platform: fix IRQ check
nvme: retrigger ANA log update if group descriptor isn't found
vfio/mdev: Do not allow a mdev_type to have a NULL parent pointer
clk: qcom: a53-pll: Add missing MODULE_DEVICE_TABLE
clk: uniphier: Fix potential infinite loop
scsi: jazz_esp: Add IRQ check
scsi: sun3x_esp: Add IRQ check
scsi: sni_53c710: Add IRQ check
scsi: ibmvfc: Fix invalid state machine BUG_ON()
mfd: stm32-timers: Avoid clearing auto reload register
HSI: core: fix resource leaks in hsi_add_client_from_dt()
x86/events/amd/iommu: Fix sysfs type mismatch
sched/debug: Fix cgroup_path[] serialization
drivers/block/null_blk/main: Fix a double free in null_init.
HID: plantronics: Workaround for double volume key presses
perf symbols: Fix dso__fprintf_symbols_by_name() to return the number of printed chars
net: lapbether: Prevent racing when checking whether the netif is running
powerpc/prom: Mark identical_pvr_fixup as __init
powerpc: Fix HAVE_HARDLOCKUP_DETECTOR_ARCH build configuration
ALSA: core: remove redundant spin_lock pair in snd_card_disconnect
bug: Remove redundant condition check in report_bug
nfc: pn533: prevent potential memory corruption
net: hns3: Limiting the scope of vector_ring_chain variable
ALSA: usb-audio: Add error checks for usb_driver_claim_interface() calls
liquidio: Fix unintented sign extension of a left shift of a u16
powerpc/64s: Fix pte update for kernel memory on radix
powerpc/perf: Fix PMU constraint check for EBB events
powerpc: iommu: fix build when neither PCI or IBMVIO is set
mac80211: bail out if cipher schemes are invalid
mt7601u: fix always true expression
IB/hfi1: Fix error return code in parse_platform_config()
net: thunderx: Fix unintentional sign extension issue
RDMA/srpt: Fix error return code in srpt_cm_req_recv()
i2c: cadence: add IRQ check
i2c: emev2: add IRQ check
i2c: jz4780: add IRQ check
i2c: sh7760: add IRQ check
ASoC: ak5558: correct reset polarity
drm/i915/gvt: Fix error code in intel_gvt_init_device()
MIPS: pci-legacy: stop using of_pci_range_to_resource
powerpc/pseries: extract host bridge from pci_bus prior to bus removal
rtlwifi: 8821ae: upgrade PHY and RF parameters
i2c: sh7760: fix IRQ error path
mwl8k: Fix a double Free in mwl8k_probe_hw
vsock/vmci: log once the failed queue pair allocation
RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails
ALSA: usb: midi: don't return -ENOMEM when usb_urb_ep_type_check fails
net: davinci_emac: Fix incorrect masking of tx and rx error channel
ath9k: Fix error check in ath9k_hw_read_revisions() for PCI devices
ath10k: Fix ath10k_wmi_tlv_op_pull_peer_stats_info() unlock without lock
powerpc/52xx: Fix an invalid ASM expression ('addi' used instead of 'add')
bnxt_en: fix ternary sign extension bug in bnxt_show_temp()
ARM: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for RTL8211E
arm64: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for RTL8211E
net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb
net:emac/emac-mac: Fix a use after free in emac_mac_tx_buf_send
RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
kfifo: fix ternary sign extension bugs
mm/sparse: add the missing sparse_buffer_fini() in error branch
mm/memory-failure: unnecessary amount of unmapping
net: Only allow init netns to set default tcp cong to a restricted algo
smp: Fix smp_call_function_single_async prototype
Revert "net/sctp: fix race condition in sctp_destroy_sock"
sctp: delay auto_asconf init until binding the first addr
Revert "of/fdt: Make sure no-map does not remove already reserved regions"
Revert "fdt: Properly handle "no-map" field in the memory region"
tpm: fix error return code in tpm2_get_cc_attrs_tbl()
fs: dlm: fix debugfs dump
tipc: convert dest node's address to network order
ASoC: Intel: bytcr_rt5640: Enable jack-detect support on Asus T100TAF
net: stmmac: Set FIFO sizes for ipq806x
i2c: bail out early when RDWR parameters are wrong
ALSA: hdsp: don't disable if not enabled
ALSA: hdspm: don't disable if not enabled
ALSA: rme9652: don't disable if not enabled
Bluetooth: Set CONF_NOT_COMPLETE as l2cap_chan default
Bluetooth: initialize skb_queue_head at l2cap_chan_create()
net: bridge: when suppression is enabled exclude RARP packets
Bluetooth: check for zapped sk before connecting
ip6_vti: proper dev_{hold|put} in ndo_[un]init methods
ASoC: Intel: bytcr_rt5640: Add quirk for the Chuwi Hi8 tablet
i2c: Add I2C_AQ_NO_REP_START adapter quirk
mac80211: clear the beacon's CRC after channel switch
pinctrl: samsung: use 'int' for register masks in Exynos
cuse: prevent clone
selftests: Set CC to clang in lib.mk if LLVM is set
kconfig: nconf: stop endless search loops
sctp: Fix out-of-bounds warning in sctp_process_asconf_param()
powerpc/smp: Set numa node before updating mask
ASoC: rt286: Generalize support for ALC3263 codec
ethtool: ioctl: Fix out-of-bounds warning in store_link_ksettings_for_user()
samples/bpf: Fix broken tracex1 due to kprobe argument change
powerpc/pseries: Stop calling printk in rtas_stop_self()
wl3501_cs: Fix out-of-bounds warnings in wl3501_send_pkt
wl3501_cs: Fix out-of-bounds warnings in wl3501_mgmt_join
powerpc/iommu: Annotate nested lock for lockdep
net: ethernet: mtk_eth_soc: fix RX VLAN offload
ia64: module: fix symbolizer crash on fdescr
ASoC: rt286: Make RT286_SET_GPIO_* readable and writable
f2fs: fix a redundant call to f2fs_balance_fs if an error occurs
PCI: iproc: Fix return value of iproc_msi_irq_domain_alloc()
PCI: Release OF node in pci_scan_device()'s error path
ARM: 9064/1: hw_breakpoint: Do not directly check the event's overflow_handler hook
rpmsg: qcom_glink_native: fix error return code of qcom_glink_rx_data()
NFSv4.2: Always flush out writes in nfs42_proc_fallocate()
NFS: Deal correctly with attribute generation counter overflow
PCI: endpoint: Fix missing destroy_workqueue()
pNFS/flexfiles: fix incorrect size check in decode_nfs_fh()
NFSv4.2 fix handling of sr_eof in SEEK's reply
rtc: ds1307: Fix wday settings for rx8130
net: hns3: disable phy loopback setting in hclge_mac_start_phy
sctp: do asoc update earlier in sctp_sf_do_dupcook_a
ethernet:enic: Fix a use after free bug in enic_hard_start_xmit
sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
netfilter: xt_SECMARK: add new revision to fix structure layout
drm/radeon: Fix off-by-one power_state index heap overwrite
drm/radeon: Avoid power table parsing memory leaks
khugepaged: fix wrong result value for trace_mm_collapse_huge_page_isolate()
mm/hugeltb: handle the error case in hugetlb_fix_reserve_counts()
ksm: fix potential missing rmap_item for stable_node
net: fix nla_strcmp to handle more then one trailing null character
smc: disallow TCP_ULP in smc_setsockopt()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
sched/fair: Fix unfairness caused by missing load decay
kernel: kexec_file: fix error return code of kexec_calculate_store_digests()
netfilter: nftables: avoid overflows in nft_hash_buckets()
i40e: Fix use-after-free in i40e_client_subtask()
ARC: entry: fix off-by-one error in syscall number validation
powerpc/64s: Fix crashes when toggling stf barrier
powerpc/64s: Fix crashes when toggling entry flush barrier
hfsplus: prevent corruption in shrinking truncate
squashfs: fix divide error in calculate_skip()
userfaultfd: release page in error path to avoid BUG_ON
drm/radeon/dpm: Disable sclk switching on Oland when two 4K 60Hz monitors are connected
iio: proximity: pulsedlight: Fix rumtime PM imbalance on error
usb: fotg210-hcd: Fix an error message
ACPI: scan: Fix a memory leak in an error handling path
blk-mq: Swap two calls in blk_mq_exit_queue()
usb: dwc3: omap: improve extcon initialization
usb: dwc3: pci: Enable usb2-gadget-lpm-disable for Intel Merrifield
usb: xhci: Increase timeout for HC halt
usb: dwc2: Fix gadget DMA unmap direction
usb: core: hub: fix race condition about TRSMRCY of resume
usb: dwc3: gadget: Return success always for kick transfer in ep queue
xhci: Do not use GFP_KERNEL in (potentially) atomic context
xhci: Add reset resume quirk for AMD xhci controller.
iio: gyro: mpu3050: Fix reported temperature value
iio: tsl2583: Fix division by a zero lux_val
cdc-wdm: untangle a circular dependency between callback and softint
KVM: x86: Cancel pvclock_gtod_work on module removal
FDDI: defxx: Make MMIO the configuration default except for EISA
MIPS: Reinstate platform `__div64_32' handler
MIPS: Avoid DIVU in `__div64_32' is result would be zero
MIPS: Avoid handcoded DIVU in `__div64_32' altogether
thermal/core/fair share: Lock the thermal zone while looping over instances
kobject_uevent: remove warning in init_uevent_argv()
netfilter: conntrack: Make global sysctls readonly in non-init netns
clk: exynos7: Mark aclk_fsys1_200 as critical
nvme: do not try to reconfigure APST when the controller is not live
x86/msr: Fix wr/rdmsr_safe_regs_on_cpu() prototypes
kgdb: fix gcc-11 warning on indentation
usb: sl811-hcd: improve misleading indentation
cxgb4: Fix the -Wmisleading-indentation warning
isdn: capi: fix mismatched prototypes
pinctrl: ingenic: Improve unreachable code generation
xsk: Simplify detection of empty and full rings
PCI: thunder: Fix compile testing
ARM: 9066/1: ftrace: pause/unpause function graph tracer in cpu_suspend()
ACPI / hotplug / PCI: Fix reference count leak in enable_slot()
Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated devices
Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state
um: Mark all kernel symbols as local
ARM: 9075/1: kernel: Fix interrupted SMC calls
scripts/recordmcount.pl: Fix RISC-V regex for clang
riscv: Workaround mcount name prior to clang-13
ceph: fix fscache invalidation
scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not found
gpiolib: acpi: Add quirk to ignore EC wakeups on Dell Venue 10 Pro 5055
ALSA: hda: generic: change the DAC ctl name for LO+SPK or LO+HP
block: reexpand iov_iter after read/write
lib: stackdepot: turn depot_lock spinlock to raw_spinlock
net: stmmac: Do not enable RX FIFO overflow interrupts
ip6_gre: proper dev_{hold|put} in ndo_[un]init methods
sit: proper dev_{hold|put} in ndo_[un]init methods
ip6_tunnel: sit: proper dev_{hold|put} in ndo_[un]init methods
ipv6: remove extra dev_hold() for fallback tunnels
iomap: fix sub-page uptodate handling
KVM: arm64: Initialize VCPU mdcr_el2 before loading it
tweewide: Fix most Shebang lines
scripts: switch explicitly to Python 3
Linux 4.19.191
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I2ea4fc6350bb5c5b5ae38ec7ad52ec20cf3b7aae
commit 51839e29cb upstream.
Some distributions are about to switch to Python 3 support only.
This means that /usr/bin/python, which is Python 2, is not available
anymore. Hence, switch scripts to use Python 3 explicitly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c25ce589dc upstream.
Change every shebang which does not need an argument to use /usr/bin/env.
This is needed as not every distro has everything under /usr/bin,
sometimes not even bash.
Signed-off-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 263d6287da upstream.
When a VCPU is created, the kvm_vcpu struct is initialized to zero in
kvm_vm_ioctl_create_vcpu(). On VHE systems, the first time
vcpu.arch.mdcr_el2 is loaded on hardware is in vcpu_load(), before it is
set to a sensible value in kvm_arm_setup_debug() later in the run loop. The
result is that KVM executes for a short time with MDCR_EL2 set to zero.
This has several unintended consequences:
* Setting MDCR_EL2.HPMN to 0 is constrained unpredictable according to ARM
DDI 0487G.a, page D13-3820. The behavior specified by the architecture
in this case is for the PE to behave as if MDCR_EL2.HPMN is set to a
value less than or equal to PMCR_EL0.N, which means that an unknown
number of counters are now disabled by MDCR_EL2.HPME, which is zero.
* The host configuration for the other debug features controlled by
MDCR_EL2 is temporarily lost. This has been harmless so far, as Linux
doesn't use the other fields, but that might change in the future.
Let's avoid both issues by initializing the VCPU's mdcr_el2 field in
kvm_vcpu_vcpu_first_run_init(), thus making sure that the MDCR_EL2 register
has a consistent value after each vcpu_load().
Fixes: d5a21bcc29 ("KVM: arm64: Move common VHE/non-VHE trap config in separate functions")
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210407144857.199746-3-alexandru.elisei@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d7a7b2014 upstream.
My previous commits added a dev_hold() in tunnels ndo_init(),
but forgot to remove it from special functions setting up fallback tunnels.
Fallback tunnels do call their respective ndo_init()
This leads to various reports like :
unregister_netdevice: waiting for ip6gre0 to become free. Usage count = 2
Fixes: 48bb569726 ("ip6_tunnel: sit: proper dev_{hold|put} in ndo_[un]init methods")
Fixes: 6289a98f08 ("sit: proper dev_{hold|put} in ndo_[un]init methods")
Fixes: 40cb881b5a ("ip6_vti: proper dev_{hold|put} in ndo_[un]init methods")
Fixes: 7f700334be ("ip6_gre: proper dev_{hold|put} in ndo_[un]init methods")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6289a98f08 upstream.
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding prior dev_hold().
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
Fixes: 919067cc84 ("net: add CONFIG_PCPU_DEV_REFCNT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f700334be upstream.
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding dev_hold(),
and vice versa.
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
ip6_gre for example (among others problematic drivers)
has to use dev_hold() in ip6gre_tunnel_init_common()
instead of from ip6gre_newlink_common(), covering
both ip6gre_tunnel_init() and ip6gre_tap_init()/
Note that ip6gre_tunnel_init_common() is not called from
ip6erspan_tap_init() thus we also need to add a dev_hold() there,
as ip6erspan_tunnel_uninit() does call dev_put()
[1]
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 0 PID: 8422 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 1 PID: 8422 Comm: syz-executor854 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d 6a 5a e8 09 31 ff 89 de e8 8d 1a ab fd 84 db 75 e0 e8 d4 13 ab fd 48 c7 c7 a0 e1 c1 89 c6 05 4a 5a e8 09 01 e8 2e 36 fb 04 <0f> 0b eb c4 e8 b8 13 ab fd 0f b6 1d 39 5a e8 09 31 ff 89 de e8 58
RSP: 0018:ffffc900018befd0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88801ef19c40 RSI: ffffffff815c51f5 RDI: fffff52000317dec
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815bdf8e R11: 0000000000000000 R12: ffff888018cf4568
R13: ffff888018cf4c00 R14: ffff8880228f2000 R15: ffffffff8d659b80
FS: 00000000014eb300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055d7bf2b3138 CR3: 0000000014933000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__refcount_dec include/linux/refcount.h:344 [inline]
refcount_dec include/linux/refcount.h:359 [inline]
dev_put include/linux/netdevice.h:4135 [inline]
ip6gre_tunnel_uninit+0x3d7/0x440 net/ipv6/ip6_gre.c:420
register_netdevice+0xadf/0x1500 net/core/dev.c:10308
ip6gre_newlink_common.constprop.0+0x158/0x410 net/ipv6/ip6_gre.c:1984
ip6gre_newlink+0x275/0x7a0 net/ipv6/ip6_gre.c:2017
__rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3443
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3491
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
Fixes: 919067cc84 ("net: add CONFIG_PCPU_DEV_REFCNT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8a7cb245cf ]
The RX FIFO overflows when the system is not able to process all received
packets and they start accumulating (first in the DMA queue in memory,
then in the FIFO). An interrupt is then raised for each overflowing packet
and handled in stmmac_interrupt(). This is counter-productive, since it
brings the system (or more likely, one CPU core) to its knees to process
the FIFO overflow interrupts.
stmmac_interrupt() handles overflow interrupts by writing the rx tail ptr
into the corresponding hardware register (according to the MAC spec, this
has the effect of restarting the MAC DMA). However, without freeing any rx
descriptors, the DMA stops right away, and another overflow interrupt is
raised as the FIFO overflows again. Since the DMA is already restarted at
the end of stmmac_rx_refill() after freeing descriptors, disabling FIFO
overflow interrupts and the corresponding handling code has no side effect,
and eliminates the interrupt storm when the RX FIFO overflows.
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Link: https://lore.kernel.org/r/20210506143312.20784-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f48652bbe3 ]
Without this change, the DAC ctl's name could be changed only when
the machine has both Speaker and Headphone, but we met some machines
which only has Lineout and Headhpone, and the Lineout and Headphone
share the Audio Mixer0 and DAC0, the ctl's name is set to "Front".
On most of machines, the "Front" is used for Speaker only or Lineout
only, but on this machine it is shared by Lineout and Headphone,
This introduces an issue in the pipewire and pulseaudio, suppose users
want the Headphone to be on and the Speaker/Lineout to be off, they
could turn off the "Front", this works on most of the machines, but on
this machine, the "Front" couldn't be turned off otherwise the
headphone will be off too. Here we do some change to let the ctl's
name change to "Headphone+LO" on this machine, and pipewire and
pulseaudio already could handle "Headphone+LO" and "Speaker+LO".
(https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/747)
BugLink: http://bugs.launchpad.net/bugs/804178
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210504073917.22406-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da91ece226 ]
Like some other Bay and Cherry Trail SoC based devices the Dell Venue
10 Pro 5055 has an embedded-controller which uses ACPI GPIO events to
report events instead of using the standard ACPI EC interface for this.
The EC interrupt is only used to report battery-level changes and
it keeps doing this while the system is suspended, causing the system
to not stay suspended.
Add an ignore-wake quirk for the GPIO pin used by the EC to fix the
spurious wakeups from suspend.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9814b55cde ]
If tcmu_handle_completions() finds an invalid cmd_id while looping over cmd
responses from userspace it sets TCMU_DEV_BIT_BROKEN and breaks the
loop. This means that it does further handling for the tcmu device.
Skip that handling by replacing 'break' with 'return'.
Additionally change tcmu_handle_completions() from unsigned int to bool,
since the value used in return already is bool.
Link: https://lore.kernel.org/r/20210423150123.24468-1-bostroesser@gmail.com
Signed-off-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ce0477150 ]
Prior to clang 13.0.0, the RISC-V name for the mcount symbol was
"mcount", which differs from the GCC version of "_mcount", which results
in the following errors:
riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_level':
main.c:(.text+0xe): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_start':
main.c:(.text+0x4e): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_finish':
main.c:(.text+0x92): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `.LBB32_28':
main.c:(.text+0x30c): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `free_initmem':
main.c:(.text+0x54c): undefined reference to `mcount'
This has been corrected in https://reviews.llvm.org/D98881 but the
minimum supported clang version is 10.0.1. To avoid build errors and to
gain a working function tracer, adjust the name of the mcount symbol for
older versions of clang in mount.S and recordmcount.pl.
Link: https://github.com/ClangBuiltLinux/linux/issues/1331
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57ac51667d ]
On Qualcomm ARM32 platforms, the SMC call can return before it has
completed. If this occurs, the call can be restarted, but it requires
using the returned session ID value from the interrupted SMC call.
The ARM32 SMCC code already has the provision to add platform specific
quirks for things like this. So let's make use of it and add the
Qualcomm specific quirk (ARM_SMCCC_QUIRK_QCOM_A6) used by the QCOM_SCM
driver.
This change is similar to the below one added for ARM64 a while ago:
commit 82bcd08702 ("firmware: qcom: scm: Fix interrupted SCM calls")
Without this change, the Qualcomm ARM32 platforms like SDX55 will return
-EINVAL for SMC calls used for modem firmware loading and validation.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5027ca63e ]
Ritesh reported a bug [1] against UML, noting that it crashed on
startup. The backtrace shows the following (heavily redacted):
(gdb) bt
...
#26 0x0000000060015b5d in sem_init () at ipc/sem.c:268
#27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2
#28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72
...
#40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359
...
#44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486
#45 0x00007f8990968b85 in __getgrnam_r [...]
#46 0x00007f89909d6b77 in grantpt [...]
#47 0x00007f8990a9394e in __GI_openpty [...]
#48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407
#49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598
#50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45
#51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334
#52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144
indicating that the UML function openpty_cb() calls openpty(),
which internally calls __getgrnam_r(), which causes the nsswitch
machinery to get started.
This loads, through lots of indirection that I snipped, the
libcom_err.so.2 library, which (in an unknown function, "??")
calls sem_init().
Now, of course it wants to get libpthread's sem_init(), since
it's linked against libpthread. However, the dynamic linker
looks up that symbol against the binary first, and gets the
kernel's sem_init().
Hajime Tazaki noted that "objcopy -L" can localize a symbol,
so the dynamic linker wouldn't do the lookup this way. I tried,
but for some reason that didn't seem to work.
Doing the same thing in the linker script instead does seem to
work, though I cannot entirely explain - it *also* works if I
just add "VERSION { { global: *; }; }" instead, indicating that
something else is happening that I don't really understand. It
may be that explicitly doing that marks them with some kind of
empty version, and that's different from the default.
Explicitly marking them with a version breaks kallsyms, so that
doesn't seem to be possible.
Marking all the symbols as local seems correct, and does seem
to address the issue, so do that. Also do it for static link,
nsswitch libraries could still be loaded there.
[1] https://bugs.debian.org/983379
Reported-by: Ritesh Raj Sarraf <rrs@debian.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Tested-By: Ritesh Raj Sarraf <rrs@debian.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e479187748 ]
Some buggy BIOS-es bring up the touchscreen-controller in a stuck
state where it blocks the I2C bus. Specifically this happens on
the Jumper EZpad 7 tablet model.
After much poking at this problem I have found that the following steps
are necessary to unstuck the chip / bus:
1. Turn off the Silead chip.
2. Try to do an I2C transfer with the chip, this will fail in response to
which the I2C-bus-driver will call: i2c_recover_bus() which will unstuck
the I2C-bus. Note the unstuck-ing of the I2C bus only works if we first
drop the chip of the bus by turning it off.
3. Turn the chip back on.
On the x86/ACPI systems were this problem is seen, step 1. and 3. require
making ACPI calls and dealing with ACPI Power Resources. This commit adds
a workaround which runtime-suspends the chip to turn it off, leaving it up
to the ACPI subsystem to deal with all the ACPI specific details.
There is no good way to detect this bug, so the workaround gets activated
by a new "silead,stuck-controller-bug" boolean device-property. Since this
is only used on x86/ACPI, this will be set by model specific device-props
set by drivers/platform/x86/touchscreen_dmi.c. Therefor this new
device-property is not documented in the DT-bindings.
Dmesg will contain the following messages on systems where the workaround
is activated:
[ 54.309029] silead_ts i2c-MSSL1680:00: [Firmware Bug]: Stuck I2C bus: please ignore the next 'controller timed out' error
[ 55.373593] i2c_designware 808622C1:04: controller timed out
[ 55.582186] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210405202745.16777-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65299e8bfb ]
Several users have been reporting that elants_i2c gives several errors
during probe and that their touchscreen does not work on their Lenovo AMD
based laptops with a touchscreen with a ELAN0001 ACPI hardware-id:
[ 0.550596] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vcc33 not found, using dummy regulator
[ 0.551836] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vccio not found, using dummy regulator
[ 0.560932] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121
[ 0.562427] elants_i2c i2c-ELAN0001:00: software reset failed: -121
[ 0.595925] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121
[ 0.597974] elants_i2c i2c-ELAN0001:00: software reset failed: -121
[ 0.621893] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121
[ 0.622504] elants_i2c i2c-ELAN0001:00: software reset failed: -121
[ 0.632650] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (4d 61 69 6e): -121
[ 0.634256] elants_i2c i2c-ELAN0001:00: boot failed: -121
[ 0.699212] elants_i2c i2c-ELAN0001:00: invalid 'hello' packet: 00 00 ff ff
[ 1.630506] elants_i2c i2c-ELAN0001:00: Failed to read fw id: -121
[ 1.645508] elants_i2c i2c-ELAN0001:00: unknown packet 00 00 ff ff
Despite these errors, the elants_i2c driver stays bound to the device
(it returns 0 from its probe method despite the errors), blocking the
i2c-hid driver from binding.
Manually unbinding the elants_i2c driver and binding the i2c-hid driver
makes the touchscreen work.
Check if the ACPI-fwnode for the touchscreen contains one of the i2c-hid
compatiblity-id strings and if it has the I2C-HID spec's DSM to get the
HID descriptor address, If it has both then make elants_i2c not bind,
so that the i2c-hid driver can bind.
This assumes that non of the (older) elan touchscreens which actually
need the elants_i2c driver falsely advertise an i2c-hid compatiblity-id
+ DSM in their ACPI-fwnodes. If some of them actually do have this
false advertising, then this change may lead to regressions.
While at it also drop the unnecessary DEVICE_NAME prefixing of the
"I2C check functionality error", dev_err already outputs the driver-name.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207759
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210405202756.16830-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3bbfd31903 ]
In enable_slot(), if pci_get_slot() returns NULL, we clear the SLOT_ENABLED
flag. When pci_get_slot() finds a device, it increments the device's
reference count. In this case, we did not call pci_dev_put() to decrement
the reference count, so the memory of the device (struct pci_dev type) will
eventually leak.
Call pci_dev_put() to decrement its reference count when pci_get_slot()
returns a PCI device.
Link: https://lore.kernel.org/r/b411af88-5049-a1c6-83ac-d104a1f429be@huawei.com
Signed-off-by: Feilong Lin <linfeilong@huawei.com>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8252ca87c7 ]
Enabling function_graph tracer on ARM causes kernel panic, because the
function graph tracer updates the "return address" of a function in order
to insert a trace callback on function exit, it saves the function's
original return address in a return trace stack, but cpu_suspend() may not
return through the normal return path.
cpu_suspend() will resume directly via the cpu_resume path, but the return
trace stack has been set-up by the subfunctions of cpu_suspend(), which
makes the "return address" inconsistent with cpu_suspend().
This patch refers to Commit de818bd452
("arm64: kernel: pause/unpause function graph tracer in cpu_suspend()"),
fixes the issue by pausing/resuming the function graph tracer on the thread
executing cpu_suspend(), so that the function graph tracer state is kept
consistent across functions that enter power down states and never return
by effectively disabling graph tracer while they are executing.
Signed-off-by: louis.wang <liang26812@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16f7ae5906 ]
Compile-testing these drivers is currently broken. Enabling it causes a
couple of build failures though:
drivers/pci/controller/pci-thunder-ecam.c:119:30: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
drivers/pci/controller/pci-thunder-pem.c:54:2: error: implicit declaration of function 'writeq' [-Werror,-Wimplicit-function-declaration]
drivers/pci/controller/pci-thunder-pem.c:392:8: error: implicit declaration of function 'acpi_get_rc_resources' [-Werror,-Wimplicit-function-declaration]
Fix them with the obvious one-line changes.
Link: https://lore.kernel.org/r/20210308152501.2135937-2-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Robert Richter <rric@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11cc2d2149 ]
In order to set the correct return flags for poll, the xsk code has to
check if the Rx queue is empty and if the Tx queue is full. This code
was unnecessarily large and complex as it used the functions that are
used to update the local state from the global state (xskq_nb_free and
xskq_nb_avail). Since we are not doing this nor updating any data
dependent on this state, we can simplify the functions. Another
benefit from this is that we can also simplify the xskq_nb_free and
xskq_nb_avail functions in a later commit.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1576759171-28550-3-git-send-email-magnus.karlsson@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6d43a9217 ]
In the second loop of ingenic_pinconf_set(), it annotates the switch
default case as unreachable(). The annotation is technically correct,
because that same case would have resulted in an early function return
in the previous loop.
However, the compiled code is suboptimal. GCC seems to work extra hard
to ensure that the unreachable code path triggers undefined behavior.
The function would fall through to start executing whatever function
happens to be next in the compilation unit.
This is problematic because:
a) it adds unnecessary 'ensure undefined behavior' logic, and
corresponding i-cache footprint; and
b) it's less robust -- if a bug were to be introduced, falling through
to the next function would be catastrophic.
Yet another issue is that, while objtool normally understands
unreachable() annotations, there's one special case where it doesn't:
when the annotation occurs immediately after a 'ret' instruction. That
happens to be the case here because unreachable() is immediately before
the return.
Remove the unreachable() annotation and replace it with a comment. This
simplifies the code generation and changes the unreachable error path to
just silently return instead of corrupting execution.
This fixes the following objtool warning:
drivers/pinctrl/pinctrl-ingenic.o: warning: objtool: ingenic_pinconf_set() falls through to next function ingenic_pinconf_group_set()
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/bc20fdbcb826512cf76b7dfd0972740875931b19.1582212881.git.jpoimboe@redhat.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5ee7d4c7fb upstream.
gcc-11 complains about a prototype declaration that is different
from the function definition:
drivers/isdn/capi/kcapi.c:724:44: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=]
724 | u16 capi20_get_manufacturer(u32 contr, u8 *buf)
| ~~~~^~~
In file included from drivers/isdn/capi/kcapi.c:13:
drivers/isdn/capi/kcapi.h:62:43: note: previously declared as an array ‘u8[64]’ {aka ‘unsigned char[64]’}
62 | u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN]);
| ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/isdn/capi/kcapi.c:790:38: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=]
790 | u16 capi20_get_serial(u32 contr, u8 *serial)
| ~~~~^~~~~~
In file included from drivers/isdn/capi/kcapi.c:13:
drivers/isdn/capi/kcapi.h:64:37: note: previously declared as an array ‘u8[8]’ {aka ‘unsigned char[8]’}
64 | u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN]);
| ~~~^~~~~~~~~~~~~~~~~~~~~~~
Change the definition to make them match.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8460f6003a upstream.
gcc-11 now warns about a confusingly indented code block:
drivers/usb/host/sl811-hcd.c: In function ‘sl811h_hub_control’:
drivers/usb/host/sl811-hcd.c:1291:9: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation]
1291 | if (*(u16*)(buf+2)) /* only if wPortChange is interesting */
| ^~
drivers/usb/host/sl811-hcd.c:1295:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
1295 | break;
Rewrite this to use a single if() block with the __is_defined() macro.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210322164244.827589-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40cc3a80bb upstream.
gcc-11 starts warning about misleading indentation inside of macros:
drivers/misc/kgdbts.c: In function ‘kgdbts_break_test’:
drivers/misc/kgdbts.c:103:9: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation]
103 | if (verbose > 1) \
| ^~
drivers/misc/kgdbts.c:200:9: note: in expansion of macro ‘v2printk’
200 | v2printk("kgdbts: breakpoint complete\n");
| ^~~~~~~~
drivers/misc/kgdbts.c:105:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
105 | touch_nmi_watchdog(); \
| ^~~~~~~~~~~~~~~~~~
The code looks correct to me, so just reindent it for readability.
Fixes: e8d31c204e ("kgdb: add kgdb internal test suite")
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210322164308.827846-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 396a66aa11 upstream.
gcc-11 warns about mismatched prototypes here:
arch/x86/lib/msr-smp.c:255:51: error: argument 2 of type ‘u32 *’ {aka ‘unsigned int *’} declared as a pointer [-Werror=array-parameter=]
255 | int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 *regs)
| ~~~~~^~~~
arch/x86/include/asm/msr.h:347:50: note: previously declared as an array ‘u32[8]’ {aka ‘unsigned int[8]’}
GCC is right here - fix up the types.
[ mingo: Twiddled the changelog. ]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210322164541.912261-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53fe2a30bc upstream.
Do not call nvme_configure_apst when the controller is not live, given
that nvme_configure_apst will fail due the lack of an admin queue when
the controller is being torn down and nvme_set_latency_tolerance is
called from dev_pm_qos_hide_latency_tolerance.
Fixes: 510a405d945b("nvme: fix memory leak for power latency tolerance")
Reported-by: Peng Liu <liupeng17@lenovo.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 34138a59b9 upstream.
This clock must be always enabled to allow access to any registers in
fsys1 CMU. Until proper solution based on runtime PM is applied
(similar to what was done for Exynos5433), mark that clock as critical
so it won't be disabled.
It was observed on Samsung Galaxy S6 device (based on Exynos7420), where
UFS module is probed before pmic used to power that device.
In this case defer probe was happening and that clock was disabled by
UFS driver, causing whole boot to hang on next CMU access.
Fixes: 753195a749 ("clk: samsung: exynos7: Correct CMU_FSYS1 clocks names")
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/linux-clk/20201024154346.9589-1-pawel.mikolaj.chmiel@gmail.com
[s.nawrocki: Added comment in the code]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2671fa4dc0 upstream.
These sysctls point to global variables:
- NF_SYSCTL_CT_MAX (&nf_conntrack_max)
- NF_SYSCTL_CT_EXPECT_MAX (&nf_ct_expect_max)
- NF_SYSCTL_CT_BUCKETS (&nf_conntrack_htable_size_user)
Because their data pointers are not updated to point to per-netns
structures, they must be marked read-only in a non-init_net ns.
Otherwise, changes in any net namespace are reflected in (leaked into)
all other net namespaces. This problem has existed since the
introduction of net namespaces.
The current logic marks them read-only only if the net namespace is
owned by an unprivileged user (other than init_user_ns).
Commit d0febd81ae ("netfilter: conntrack: re-visit sysctls in
unprivileged namespaces") "exposes all sysctls even if the namespace is
unpriviliged." Since we need to mark them readonly in any case, we can
forego the unprivileged user check altogether.
Fixes: d0febd81ae ("netfilter: conntrack: re-visit sysctls in unprivileged namespaces")
Signed-off-by: Jonathon Reinhart <Jonathon.Reinhart@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25ab14cbe9 upstream.
Remove the inline asm with a DIVU instruction from `__div64_32' and use
plain C code for the intended DIVMOD calculation instead. GCC is smart
enough to know that both the quotient and the remainder are calculated
with single DIVU, so with ISAs up to R5 the same instruction is actually
produced with overall similar code.
For R6 compiled code will work, but separate DIVU and MODU instructions
will be produced, which are also interlocked, so scalar implementations
will likely not perform as well as older ISAs with their asynchronous MD
unit. Likely still faster then the generic algorithm though.
This removes a compilation error for R6 however where the original DIVU
instruction is not supported anymore and the MDU accumulator registers
have been removed and consequently GCC complains as to a constraint it
cannot find a register for:
In file included from ./include/linux/math.h:5,
from ./include/linux/kernel.h:13,
from mm/page-writeback.c:15:
./include/linux/math64.h: In function 'div_u64_rem':
./arch/mips/include/asm/div64.h:76:17: error: inconsistent operand constraints in an 'asm'
76 | __asm__("divu $0, %z1, %z2" \
| ^~~~~~~
./include/asm-generic/div64.h:245:25: note: in expansion of macro '__div64_32'
245 | __rem = __div64_32(&(n), __base); \
| ^~~~~~~~~~
./include/linux/math64.h:91:22: note: in expansion of macro 'do_div'
91 | *remainder = do_div(dividend, divisor);
| ^~~~~~
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0404s from 1.0445s with R3400
@40MHz. The module's MIPS I machine code has also shrunk by 12 bytes or
3 instructions.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1d337d45e upstream.
We already check the high part of the divident against zero to avoid the
costly DIVU instruction in that case, needed to reduce the high part of
the divident, so we may well check against the divisor instead and set
the high part of the quotient to zero right away. We need to treat the
high part the divident in that case though as the remainder that would
be calculated by the DIVU instruction we avoided.
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0445s and 0.2619s from 1.0668s
and 0.2629s respectively for an R3400 CPU @40MHz and a 5Kc CPU @160MHz.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c49f71f607 upstream.
Our current MIPS platform `__div64_32' handler is inactive, because it
is incorrectly only enabled for 64-bit configurations, for which generic
`do_div' code does not call it anyway.
The handler is not suitable for being called from there though as it
only calculates 32 bits of the quotient under the assumption the 64-bit
divident has been suitably reduced. Code for such reduction used to be
there, however it has been incorrectly removed with commit c21004cd5b
("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0."), which should
have only updated an obsoleted constraint for an inline asm involving
$hi and $lo register outputs, while possibly wiring the original MIPS
variant of the `do_div' macro as `__div64_32' handler for the generic
`do_div' implementation
Correct the handler as follows then:
- Revert most of the commit referred, however retaining the current
formatting, except for the final two instructions of the inline asm
sequence, which the original commit missed. Omit the original 64-bit
parts though.
- Rename the original `do_div' macro to `__div64_32'. Use the combined
`x' constraint referring to the MD accumulator as a whole, replacing
the original individual `h' and `l' constraints used for $hi and $lo
registers respectively, of which `h' has been obsoleted with GCC 4.4.
Update surrounding code accordingly.
We have since removed support for GCC versions before 4.9, so no need
for a special arrangement here; GCC has supported the `x' constraint
since forever anyway, or at least going back to 1991.
- Rename the `__base' local variable in `__div64_32' to `__radix' to
avoid a conflict with a local variable in `do_div'.
- Actually enable this code for 32-bit rather than 64-bit configurations
by qualifying it with BITS_PER_LONG being 32 instead of 64. Include
<asm/bitsperlong.h> for this macro rather than <linux/types.h> as we
don't need anything else.
- Finally include <asm-generic/div64.h> last rather than first.
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0668s and 0.2629s from 2.1529s
and 0.5647s respectively for an R3400 CPU @40MHz and a 5Kc CPU @160MHz.
For a reference 64-bit `do_div' code where we have the DDIVU instruction
available to do the whole calculation right away averages at 0.0660s for
the latter CPU.
Fixes: c21004cd5b ("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0.")
Reported-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.30+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 193ced4a79 upstream.
Recent versions of the PCI Express specification have deprecated support
for I/O transactions and actually some PCIe host bridges, such as Power
Systems Host Bridge 4 (PHB4), do not implement them.
The default kernel configuration choice for the defxx driver is the use
of I/O ports rather than MMIO for PCI and EISA systems. It may have
made sense as a conservative backwards compatible choice back when MMIO
operation support was added to the driver as a part of TURBOchannel bus
support. However nowadays this configuration choice makes the driver
unusable with systems that do not implement I/O transactions for PCIe.
Make DEFXX_MMIO the configuration default then, except where configured
for EISA. This exception is because an EISA adapter can have its MMIO
decoding disabled with ECU (EISA Configuration Utility) and therefore
not available with the resource allocation infrastructure we implement,
while port I/O is always readily available as it uses slot-specific
addressing, directly mapped to the slot an option card has been placed
in and handled with our EISA bus support core. Conversely a kernel that
supports modern systems which may not have I/O transactions implemented
for PCIe will usually not be expected to handle legacy EISA systems.
The change of the default will make it easier for people, including but
not limited to distribution packagers, to make a working choice for the
driver.
Update the option description accordingly and while at it replace the
potentially ambiguous PIO acronym with IOP for "port I/O" vs "I/O ports"
according to our nomenclature used elsewhere.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: e89a2cfb7d ("[TC] defxx: TURBOchannel support")
Cc: stable@vger.kernel.org # v2.6.21+
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 594b27e677 upstream.
Nothing prevents the following:
pvclock_gtod_notify()
queue_work(system_long_wq, &pvclock_gtod_work);
...
remove_module(kvm);
...
work_queue_run()
pvclock_gtod_work() <- UAF
Ditto for any other operation on that workqueue list head which touches
pvclock_gtod_work after module removal.
Cancel the work in kvm_arch_exit() to prevent that.
Fixes: 16e8d74d2d ("KVM: x86: notifier for clocksource changes")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Message-Id: <87czu4onry.ffs@nanos.tec.linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af0e1871d7 upstream.
The lux_val returned from tsl2583_get_lux can potentially be zero,
so check for this to avoid a division by zero and an overflowed
gain_trim_val.
Fixes clang scan-build warning:
drivers/iio/light/tsl2583.c:345:40: warning: Either the
condition 'lux_val<0' is redundant or there is division
by zero at line 345. [zerodivcond]
Fixes: ac4f6eee8f ("staging: iio: TAOS tsl258x: Device driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18ffa988db upstream.
If an error is received when issuing a start or update transfer
command, the error handler will stop all active requests (including
the current USB request), and call dwc3_gadget_giveback() to notify
function drivers of the requests which have been stopped. Avoid
returning an error for kick transfer during EP queue, to remove
duplicate cleanup operations on the request being queued.
Fixes: 8d99087c2d ("usb: dwc3: gadget: Properly handle failed kick_transfer")
cc: stable@vger.kernel.org
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1620410119-24971-1-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman