This adds the necessary data for handling dfi on the rk3288.
Access the dfi via registers provided by GRF (general register
files) module.
Change-Id: Ic7241af3c20a269ab362055dea04d260e01c50de
Signed-off-by: Tang Yun ping <typ@rock-chips.com>
This adds the necessary data for handling dfi on the rk3368.
Access the dfi via registers provided by GRF (general register
files) module.
Change-Id: I96c2b4dcd34d90731b749ebdbe6922f01559d8e6
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Fix build error when build as module by
replace irq_set_affinity() with irq_set_affinity_hint().
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: I1ccd70954a5910738bfe4c508046eda2f940a226
Add a new dtsi file - rk3399-opp.dtsi, to configure opp-tables
for cpu, gpu and dmc.
Add rk3399-early-opp.dtsi for board with ES1, which need limit
frequency for cpu, gpu and dmc.
Change-Id: Ib57761fd5f405b0e79039d7a01e6e023d6f5dc2c
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Add a new compatible for thermal founding on RK3568 SoC.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Change-Id: I5ec192a380ffb331120fa0fed20df83d5d83e8d9
rockchip_otp_module_init() depends on nvmem_init() to init nvmem_bus_type.
But rockchip_otp_module_init() and nvmem_init() are both in the same
subsys_initcall level.
Change-Id: I58bc66519fb76179be3e6a170048a67c0861b224
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
The rk1808 efuse read has some issues when several threads start to read
efuse through nvmem file node.
Thread1 thread2
1. timing_init
2. write auto_ctrl
3. delay timing_init
4. read status write auto_ctrl
5. if error goto to timing_deinit delay
The thread1 will read no finish bit and then goto error, the user will
see a "Input/Output Error".
The thread1 do timing deinit will cause thread2 halt on read status, and
the user will never success to do read efuse again.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Change-Id: I3f462afd844686aac153acc0c33215fbd96827a3
This adds the necessary data for handling efuse on the rk1808.
Change-Id: I78b66db1fdc22430ab93b07ad3c7cea3355a7f6e
Signed-off-by: Liang Chen <cl@rock-chips.com>
This adds the necessary data for handling efuse on the rk3128.
Change-Id: Ieda973675ff959b3157bb4afe6e1dcdfac65506c
Signed-off-by: Liang Chen <cl@rock-chips.com>
This adds the necessary data for handling secure efuse on the rk3288.
Need to use secure interface to access efuse when kernel is in no-secure
mode.
Change-Id: I1979f23ed8f85c9eb248de276b32adcbb165bd79
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
This adds the necessary data for handling efuse on the rk3368.
As efuse of rk3368 is secure, use secure interface to access efuse.
Change-Id: I72c29348b7744b232d75ab51c56dc7de0988c24e
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
drm_atomic_set_property isn't export function, so we set default prop
vale to instead of it.
Change-Id: I4acc6ddd045415aa180d467b45085609408e2447
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Esmart/Smart should add offset in y mirror mode.
Change-Id: I5299543006c702c1492ee740460d0b7536e7d6e8
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Add support to change thermal governor to dummy, and the system
monitor will manage cooling devices.
This also fixes the following build errors when build as a module.
ERROR: modpost: "__governor_thermal_table_end" [drivers/soc/rockchip/rockchip_system_monitor.ko] undefined!
ERROR: modpost: "__governor_thermal_table" [drivers/soc/rockchip/rockchip_system_monitor.ko] undefined!
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Change-Id: Ia68b5bf2b6d94cb13fafc5cde74bc80b32dfac0a
In order to fix the following error when enable DEBUG_FS.
drivers/clk/rockchip/clk-pll.c:1643:1: warning: data definition has no type or storage class
error, forbidden warning:clk-pll.c:1643
late_initcall(boost_debug_init);
^~~~~~~~~~~~~
drivers/clk/rockchip/clk-pll.c:1643:1: error: type defaults to 'int' in declaration of 'late_initcall' [-Werror=implicit-int]
drivers/clk/rockchip/clk-pll.c:1643:1: warning: parameter names (without types) in function declaration
error, forbidden warning:clk-pll.c:1643
drivers/clk/rockchip/clk-pll.c:1623:19: warning: 'boost_debug_init' defined but not used [-Wunused-function]
error, forbidden warning:clk-pll.c:1623
static int __init boost_debug_init(void)
^~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
scripts/Makefile.build:333: recipe for target 'drivers/clk/rockchip/clk-pll.o' failed
make[4]: *** [drivers/clk/rockchip/clk-pll.o] Error 1
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Change-Id: I6aa341ea05925f6c05285329fd56b7c1e7f2307b
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
stress test:
1. Antutu, use governor simpleondemand
2. Need for Speed, use governor simpleondemand
3. Glmark2, use userspace, scanning frequency
Change-Id: Ibe27380e582b193d900b0d55da3567ce553c32df
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
To support ddr frequency scaling function, we need
enable dmc and dfi node.
Change-Id: I84ea6bff679365d86937ff10bcdf466ea31901fb
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Add support to check initial rate and voltage according to opp table,
limit rate and update voltage according to temperature.
Change-Id: I146787e07be63f9f7eeaf93e8a1594809dcc23e8
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
DRM_FORMAT_NV20 and DRM_FORMAT_NV30 is a 2 plane format suitable for
linear layouts, this two format is similar to NV15 has no padding
between component, but NV15 is 4:2:0 sub-sampling, NV20 is 4:2:2
sub-sampling and NV30 is no-sampling.
The '20' and '30' suffix refers to the optimum effective bits per
pixel which is achieved.
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Change-Id: I84da7e03125e675f274c6307128b4b7b307767cc
for example:
Use CLuster0 as cursor win for vp0.
&vp0 {
cursor-win-id = <ROCKCHIP_VOP2_CLUSTER0>;
};
Change-Id: I10f7921928fbf7ff803c55a95cbce62df658fbed
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
