[ Upstream commit 9048beca9c5614d486e2b492c0a7867164bf56a8 ]
during entropy evaluation, if the generated samples fail
any statistical test, then, all of the bits will be discarded,
and a second set of samples will be generated and tested.
the entropy delay interval should be doubled before performing the
retry.
also, ctrlpriv->rng4_sh_init and inst_handles both reads RNG DRNG
status register, but only inst_handles is updated before every retry.
so only check inst_handles and removing ctrlpriv->rng4_sh_init
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09fefb24ed5e15f3b112f6c04b21a90ea23eaf8b ]
dw_pcie_edma_irq_verify() is supposed to verify the eDMA IRQs in devicetree
by fetching them using either 'dma' or 'dmaX' IRQ names. Former is used
when the platform uses a single IRQ for all eDMA channels and latter is
used when the platform uses separate IRQ per channel. But currently,
dw_pcie_edma_irq_verify() bails out early if edma::nr_irqs is 1, i.e., when
a single IRQ is used. This gives an impression that the driver could work
with any single IRQ in devicetree, not necessarily with name 'dma'.
But dw_pcie_edma_irq_vector(), which actually requests the IRQ, does
require the single IRQ to be named as 'dma'. So this creates inconsistency
between dw_pcie_edma_irq_verify() and dw_pcie_edma_irq_vector().
Thus, to fix this inconsistency, make sure dw_pcie_edma_irq_verify() also
verifies the single IRQ name by removing the bail out code.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: fix typos]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250908165914.547002-3-cassel@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a23ea1f7558bdd3f8d2b35b1c2e16a2f9bf671e ]
Using the number of bytes in the request as DMA timeout is really
inconsistent, as large requests could possibly set a timeout of
hundreds of seconds.
Remove the per-channel timeout field and use a single, static DMA
timeout of 3 seconds for all requests.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Reviewed-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df3c6e0b6d83450563d6266e1dacc7eaf25511f4 ]
Fix the issue of max_timeout being calculated larger than actual value.
The calculation result of freq / (S3C2410_WTCON_PRESCALE_MAX + 1) /
S3C2410_WTCON_MAXDIV is smaller than the actual value because the remainder
is discarded during the calculation process. This leads to a larger
calculated value for max_timeout compared to the actual settable value.
To resolve this issue, the order of calculations in the computation process
has been adjusted.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b595974b4afe0e171dd707da570964ff642742e3 ]
The Asus Z13 folio has a multitouch touchpad that needs to bind
to the hid-multitouch driver in order to work properly. So bind
it to the HID_GROUP_GENERIC group to release the touchpad and
move it to the bottom so that the comment applies to it.
While at it, change the generic KEYBOARD3 name to Z13_FOLIO.
Reviewed-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc2f650f7e6857bf384069c1a56b2937a1ee370d ]
netdev_WARN() uses WARN/WARN_ON to print a backtrace along with
file and line information. In this case, udp_tunnel_nic_register()
returning an error is just a failed operation, not a kernel bug.
udp_tunnel_nic_register() can fail due to a memory allocation
failure (kzalloc() or udp_tunnel_nic_alloc()).
This is a normal runtime error and not a kernel bug.
Replace netdev_WARN() with netdev_warn() accordingly.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250910195031.3784748-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43adad382e1fdecabd2c4cd2bea777ef4ce4109e ]
When 8139too is probing and 8139TOO_PIO=y it will call pci_iomap_range()
and from there __pci_ioport_map() for the PCI IO space.
If HAS_IOPORT_MAP=n and NO_GENERIC_PCI_IOPORT_MAP=n, like it is on my
m68k config, __pci_ioport_map() becomes NULL, pci_iomap_range() will
always fail and the driver will complain it couldn't map the PIO space
and return an error.
NO_IOPORT_MAP seems to cover the case where what 8139too is trying
to do cannot ever work so make 8139TOO_PIO depend on being it false
and avoid creating an unusable driver.
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Link: https://patch.msgid.link/20250907064349.3427600-1-daniel@thingy.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 960550503965094b0babd7e8c83ec66c8a763b0b ]
The commit b2798ba0b8 ("KVM: X86: Choose qspinlock when dedicated
physical CPUs are available") states that when PV_DEDICATED=1
(vCPU has dedicated pCPU), qspinlock should be preferred regardless of
PV_UNHALT. However, the current implementation doesn't reflect this: when
PV_UNHALT=0, we still use virt_spin_lock() even with dedicated pCPUs.
This is suboptimal because:
1. Native qspinlocks should outperform virt_spin_lock() for dedicated
vCPUs irrespective of HALT exiting
2. virt_spin_lock() should only be preferred when vCPUs may be preempted
(non-dedicated case)
So reorder the PV spinlock checks to:
1. First handle dedicated pCPU case (disable virt_spin_lock_key)
2. Second check single CPU, and nopvspin configuration
3. Only then check PV_UNHALT support
This ensures we always use native qspinlock for dedicated vCPUs, delivering
pretty performance gains at high contention levels.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Wangyang Guo <wangyang.guo@intel.com>
Link: https://lore.kernel.org/r/20250722110005.4988-1-lirongqing@baidu.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db99b2f2b3e2cd8227ac9990ca4a8a31a1e95e56 ]
tcp reject code won't reply to a tcp reset.
But the icmp reject 'netdev' family versions will reply to icmp
dst-unreach errors, unlike icmp_send() and icmp6_send() which are used
by the inet family implementation (and internally by the REJECT target).
Check for the icmp(6) type and do not respond if its an unreachable error.
Without this, something like 'ip protocol icmp reject', when used
in a netdev chain attached to 'lo', cause a packet loop.
Same for two hosts that both use such a rule: each error packet
will be replied to.
Such situation persist until the (bogus) rule is amended to ratelimit or
checks the icmp type before the reject statement.
As the inet versions don't do this make the netdev ones follow along.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47efbac9b768553331b9459743a29861e0acd797 ]
Use require_command() so that the test will return SKIP (4) when a
required command is not present.
Before:
# ./traceroute.sh
SKIP: Could not run IPV6 test without traceroute6
SKIP: Could not run IPV4 test without traceroute
$ echo $?
0
After:
# ./traceroute.sh
TEST: traceroute6 not installed [SKIP]
$ echo $?
4
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-6-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecba852dc9f4993f4f894ea1f352564560e19a3e ]
Change "ret" from u8 to int type in redrat3_enable_detector() to store
negative error codes or zero returned by redrat3_send_cmd() and
usb_submit_urb() - this better aligns with the coding standards and
maintains code consistency.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c7c19466c854fa86b82d2148eaa9bf0e6531423 ]
The driver for the Rockchip MIPI CSI-2 DPHY uses GRF register offset
value 0 to sort out undefined registers. However, the RK3588 CSIDPHY GRF
this offset is perfectly fine (in fact, register 0 is the only one in
this register file).
Introduce a boolean variable to indicate valid registers and allow writes
to register 0.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-4-a4f340a7f0cf@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5ca8d0c7a6388abd5d8023cc682e1543728cc73 ]
Disable auto-hibern8 during power mode transitions to prevent unintended
entry into auto-hibern8. Restore the original auto-hibern8 timer value
after completing the power mode change to maintain system stability and
prevent potential issues during power state transitions.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit deb105f49879dd50d595f7f55207d6e74dec34e6 ]
The 88e1510 PHY has an erratum where the phy downshift counter is not
cleared after phy being suspended(BMCR_PDOWN set) and then later
resumed(BMCR_PDOWN cleared). This can cause the gigabit link to
intermittently downshift to a lower speed.
Disabling and re-enabling the downshift feature clears the counter,
allowing the PHY to retry gigabit link negotiation up to the programmed
retry count times before downshifting. This behavior has been observed
on copper links.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250906-marvell_fix-v2-1-f6efb286937f@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit faac32d4ece30609f1a0930ca0ae951cf6dc1786 ]
Improve the recovery process for hibernation exit failures. Trigger the
error handler and break the suspend operation to ensure effective
recovery from hibernation errors. Activate the error handling mechanism
by ufshcd_force_error_recovery and scheduling the error handler work.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15ef3f5aa822f32524cba1463422a2c9372443f0 ]
Improve the recovery process for failed resume operations. Log the
device's power status and return 0 if both resume and recovery fail to
prevent I/O hang.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfbd5aa5347fbd11ade188b316b800bfb27d9e22 ]
The OmniVision OG01A1B image sensor is a monochrome sensor, it supports
8-bit and 10-bit RAW output formats only.
That said the planar greyscale Y8/Y10 media formats are more appropriate
for the sensor instead of the originally and arbitrary selected SGRBG one,
since there is no red, green or blue color components.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e28022873c0d051e980c4145f1965cab5504b498 ]
Currently, misc_deregister() uses list_del() to remove the device
from the list. After list_del(), the list pointers are set to
LIST_POISON1 and LIST_POISON2, which may help catch use-after-free bugs,
but does not reset the list head.
If misc_deregister() is called more than once on the same device,
list_empty() will not return true, and list_del() may be called again,
leading to undefined behavior.
Replace list_del() with list_del_init() to reinitialize the list head
after deletion. This makes the code more robust against double
deregistration and allows safe usage of list_empty() on the miscdevice
after deregistration.
[ Note, this seems to keep broken out-of-tree drivers from doing foolish
things. While this does not matter for any in-kernel drivers,
external drivers could use a bit of help to show them they shouldn't
be doing stuff like re-registering misc devices - gregkh ]
Signed-off-by: Xion Wang <xion.wang@mediatek.com>
Link: https://lore.kernel.org/r/20250904063714.28925-2-xion.wang@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10fb1b2fcaee5545a5e54db1ed4d7b15c2db50c8 ]
If two fault IRQs arrive in short succession recovery work will be
queued up twice.
When recovery runs a second time it may end up killing an unrelated
context.
Prevent this by masking off interrupts when triggering recovery.
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/670023/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87c5ff5615dc0a37167e8faf3adeeddc6f1344a3 ]
In the __cdnsp_gadget_init() and cdnsp_gadget_exit() functions, the gadget
structure (pdev->gadget) was freed before its endpoints.
The endpoints are linked via the ep_list in the gadget structure.
Freeing the gadget first leaves dangling pointers in the endpoint list.
When the endpoints are subsequently freed, this results in a use-after-free.
Fix:
By separating the usb_del_gadget_udc() operation into distinct "del" and
"put" steps, cdnsp_gadget_free_endpoints() can be executed prior to the
final release of the gadget structure with usb_put_gadget().
A patch similar to bb9c74a5bd14("usb: dwc3: gadget: Free gadget structure
only after freeing endpoints").
Signed-off-by: Chen Yufeng <chenyufeng@iie.ac.cn>
Link: https://lore.kernel.org/r/20250905094842.1232-1-chenyufeng@iie.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa819e3a7c1ee994ce014cc5a991c7fd91bc00f1 ]
Some SOCs which are part of the cyan skillfish family
rely on an explicit firmware for IP discovery. Add support
for the gpu_info firmware.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9be15fbfc6c5c89c22cf6e209f66ea43ee0e58bb ]
After a panic if SNP is enabled in the previous kernel then the kdump
kernel boots with IOMMU SNP enforcement still enabled.
IOMMU command buffers and event buffer registers remain locked and
exclusive to the previous kernel. Attempts to enable command and event
buffers in the kdump kernel will fail, as hardware ignores writes to
the locked MMIO registers as per AMD IOMMU spec Section 2.12.2.1.
Skip enabling command buffers and event buffers for kdump boot as they
are already enabled in the previous kernel.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Sairaj Kodilkar <sarunkod@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/576445eb4f168b467b0fc789079b650ca7c5b037.1756157913.git.ashish.kalra@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69777753a8919b0b8313c856e707e1d1fe5ced85 ]
When the EEPROM MAC is read by way of ADDRH, it can return all 0s the
first time. Subsequent reads succeed.
This is fully reproduceable on the Phytec PCM049 SOM.
Re-read the ADDRH when this behaviour is observed, in an attempt to
correctly apply the EEPROM MAC address.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://patch.msgid.link/20250903132610.966787-1-colin.foster@in-advantage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73d50aa92f28ee8414fbfde011974fce970b82cc ]
Call the dedicated v4l2_disable_ioctl helper instead of manually
checking whether the current context is an encoder for the selection
api ioctls.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91c5d7c849273d14bc4bae1b92666bdb5409294a ]
The .querystd callback should not program the device with the detected
standard, it should only report the standard to user-space. User-space
may then use .s_std to set the standard, if it wants to use it.
All that is required of .querystd is to setup the auto detection of
standards and report its findings.
While at it add some documentation on why this can't happen while
streaming and improve the error handling using a scoped guard.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46c1e7814d1c3310ef23c01ed1a582ef0c8ab1d2 ]
The .set_fmt callback should not write the new format directly do the
device, it should only store it and have it applied by .s_stream.
The .s_stream callback already calls adv7180_set_field_mode() so it's
safe to remove programming of the device and just store the format and
have .s_stream apply it.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 878c496ac5080f94a93a9216a8f70cfd67ace8c9 ]
The adv7180_set_power() utilizes adv7180_write() which in turn requires
the state mutex to be held, take it before calling adv7180_set_power()
to avoid tripping a lockdep_assert_held().
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21f82062d0f241e55dd59eb630e8710862cc90b4 ]
An exchange with a NFC target must complete within NCI_DATA_TIMEOUT.
A delay of 700 ms is not sufficient for cryptographic operations on smart
cards. CardOS 6.0 may need up to 1.3 seconds to perform 256-bit ECDH
or 3072-bit RSA. To prevent brute-force attacks, passports and similar
documents introduce even longer delays into access control protocols
(BAC/PACE).
The timeout should be higher, but not too much. The expiration allows
us to detect that a NFC target has disappeared.
Signed-off-by: Juraj Šarinay <juraj@sarinay.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250902113630.62393-1-juraj@sarinay.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d95261eeb74958cd496e1875684827dc5d028cc ]
In ipv6_rpl_srh_rcv() we use min(net->ipv6.devconf_all->rpl_seg_enabled,
idev->cnf.rpl_seg_enabled) is intended to return 0 when either value is
zero, but if one of the values is negative it will in fact return non-zero.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20250901123726.1972881-3-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85705b18ae7674347f8675f64b2b3115fb1d5629 ]
The kfd CRIU checkpoint ioctl would return an error if trying
to checkpoint a process with no kfd buffer objects.
This is a normal case and should not be an error.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ddcb0cb9d10e6e70a68e0cb8f0b8e3a7eb8ccaf ]
Driver unconditionally saves current state on first init in
dsi_pll_7nm_init(), but does not save the VCO rate, only some of the
divider registers. The state is then restored during probe/enable via
msm_dsi_phy_enable() -> msm_dsi_phy_pll_restore_state() ->
dsi_7nm_pll_restore_state().
Restoring calls dsi_pll_7nm_vco_set_rate() with
pll_7nm->vco_current_rate=0, which basically overwrites existing rate of
VCO and messes with clock hierarchy, by setting frequency to 0 to clock
tree. This makes anyway little sense - VCO rate was not saved, so
should not be restored.
If PLL was not configured configure it to minimum rate to avoid glitches
and configuring entire in clock hierarchy to 0 Hz.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/657827/
Link: https://lore.kernel.org/r/20250610-b4-sm8750-display-v6-9-ee633e3ddbff@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e742de97c806a4048418237ef1283e7d71eaf4b ]
DMA Engine has support for the callback_result which provides
the status of the request and the residue. This helps in
determining the correct status of the request and in
efficient resource management of the request.
The 'callback_result' method is preferred over the deprecated
'callback' method.
Signed-off-by: Devendra K Verma <devverma@amd.com>
Link: https://lore.kernel.org/r/20250821121505.318179-1-devverma@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9a3e9929452780df16f3414f0d59b5f69d058cf ]
This patch modifies the type of setup_xref from void to int and handles
errors since the function can fail.
`setup_xref` now returns the (eventual) error from
`dmae_set_dmars`|`dmae_set_chcr`, while `shdma_tx_submit` handles the
result, removing the chunks from the queue and marking PM as idle in
case of an error.
Signed-off-by: Thomas Andreatta <thomas.andreatta2000@gmail.com>
Link: https://lore.kernel.org/r/20250827152442.90962-1-thomas.andreatta2000@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
