commit 1004ce4c25 upstream.
Synchronization is recommended before disabling the trace registers
to prevent any start or stop points being speculative at the point
of disabling the unit (section 7.3.77 of ARM IHI 0064D).
Synchronization is also recommended after programming the trace
registers to ensure all updates are committed prior to normal code
resuming (section 4.3.7 of ARM IHI 0064D).
Let's ensure these syncronization points are present in the code
and clearly commented.
Note that we could rely on the barriers in CS_LOCK and
coresight_disclaim_device_unlocked or the context switch to user
space - however coresight may be of use in the kernel.
On armv8 the mb macro is defined as dsb(sy) - Given that the etm4x is
only used on armv8 let's directly use dsb(sy) instead of mb(). This
removes some ambiguity and makes it easier to correlate the code with
the TRM.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Fixed capital letter for "use" in title]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-11-mathieu.poirier@linaro.org
Cc: stable@vger.kernel.org # 4.9+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc3a7bfe62 upstream.
Today, put_compat_statfs64() disallows nearly any field value over
2^32 if f_bsize is only 32 bits, but that makes no sense.
compat_statfs64 is there for the explicit purpose of providing 64-bit
fields for f_files, f_ffree, etc. And f_bsize is always only 32 bits.
As a result, 32-bit userspace gets -EOVERFLOW for i.e. large file
counts even with -D_FILE_OFFSET_BITS=64 set.
In reality, only f_bsize and f_frsize can legitimately overflow
(fields like f_type and f_namelen should never be large), so test
only those fields.
This bug was discussed at length some time ago, and this is the proposal
Al suggested at https://lkml.org/lkml/2018/8/6/640. It seemed to get
dropped amid the discussion of other related changes, but this
part seems obviously correct on its own, so I've picked it up and
sent it, for expediency.
Fixes: 64d2ab32ef ("vfs: fix put_compat_statfs64() does not handle errors")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a111b7c0f2 upstream.
Configure arm64 runtime CPU speculation bug mitigations in accordance
with the 'mitigations=' cmdline option. This affects Meltdown, Spectre
v2, and Speculative Store Bypass.
The default behavior is unchanged.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
[will: reorder checks so KASLR implies KPTI and SSBS is affected by cmdline]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cbdf8a189a ]
On a CPU that doesn't support SSBS, PSTATE[12] is RES0. In a system
where only some of the CPUs implement SSBS, we end-up losing track of
the SSBS bit across task migration.
To address this issue, let's force the SSBS bit on context switch.
Fixes: 8f04e8e6e2 ("arm64: ssbd: Add support for PSTATE.SSBS rather than trapping to EL3")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
[will: inverted logic and added comments]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eb337cdfcd ]
SSBS provides a relatively cheap mitigation for SSB, but it is still a
mitigation and its presence does not indicate that the CPU is unaffected
by the vulnerability.
Tweak the mitigation logic so that we report the correct string in sysfs.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 526e065dbc ]
Return status based on ssbd_state and __ssb_safe. If the
mitigation is disabled, or the firmware isn't responding then
return the expected machine state based on a whitelist of known
good cores.
Given a heterogeneous machine, the overall machine vulnerability
defaults to safe but is reset to unsafe when we miss the whitelist
and the firmware doesn't explicitly tell us the core is safe.
In order to make that work we delay transitioning to vulnerable
until we know the firmware isn't responding to avoid a case
where we miss the whitelist, but the firmware goes ahead and
reports the core is not vulnerable. If all the cores in the
machine have SSBS, then __ssb_safe will remain true.
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 73f3816609 ]
We currently have a list of CPUs affected by Spectre-v2, for which
we check that the firmware implements ARCH_WORKAROUND_1. It turns
out that not all firmwares do implement the required mitigation,
and that we fail to let the user know about it.
Instead, let's slightly revamp our checks, and rely on a whitelist
of cores that are known to be non-vulnerable, and let the user know
the status of the mitigation in the kernel log.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f54dada827 ]
In valid_user_regs() we treat SSBS as a RES0 bit, and consequently it is
unexpectedly cleared when we restore a sigframe or fiddle with GPRs via
ptrace.
This patch fixes valid_user_regs() to account for this, updating the
function to refer to the latest ARM ARM (ARM DDI 0487D.a). For AArch32
tasks, SSBS appears in bit 23 of SPSR_EL1, matching its position in the
AArch32-native PSR format, and we don't need to translate it as we have
to for DIT.
There are no other bit assignments that we need to account for today.
As the recent documentation describes the DIT bit, we can drop our
comment regarding DIT.
While removing SSBS from the RES0 masks, existing inconsistent
whitespace is corrected.
Fixes: d71be2b6c0 ("arm64: cpufeature: Detect SSBS and advertise to userspace")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8f04e8e6e2 ]
On CPUs with support for PSTATE.SSBS, the kernel can toggle the SSBD
state without needing to call into firmware.
This patch hooks into the existing SSBD infrastructure so that SSBS is
used on CPUs that support it, but it's all made horribly complicated by
the very real possibility of big/little systems that don't uniformly
provide the new capability.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c82dd6d078 ]
When the handle_exception function addresses an exception, the interrupts
will be unconditionally enabled after finishing the context save. However,
It may erroneously enable the interrupts if the interrupts are disabled
before entering the handle_exception.
For example, one of the WARN_ON() condition is satisfied in the scheduling
where the interrupt is disabled and rq.lock is locked. The WARN_ON will
trigger a break exception and the handle_exception function will enable the
interrupts before entering do_trap_break function. During the procedure, if
a timer interrupt is pending, it will be taken when interrupts are enabled.
In this case, it may cause a deadlock problem if the rq.lock is locked
again in the timer ISR.
Hence, the handle_exception() can only enable interrupts when the state of
sstatus.SPIE is 1.
This patch is tested on HiFive Unleashed board.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
[paul.walmsley@sifive.com: updated to apply]
Fixes: bcae803a21 ("RISC-V: Enable IRQ during exception handling")
Cc: David Abdurachmanov <david.abdurachmanov@sifive.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b63fd11cce ]
When using 'perf stat' with repeat and interval option, it shows wrong
values for events.
The wrong values will be shown for the first interval on the second and
subsequent repetitions.
Without the fix:
# perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5
2.000282489 53 faults
2.000282489 513 sched:sched_switch
4.005478208 3,721 faults
4.005478208 2,666 sched:sched_switch
5.025470933 395 faults
5.025470933 1,307 sched:sched_switch
2.009602825 1,84,46,74,40,73,70,95,47,520 faults <------
2.009602825 1,84,46,74,40,73,70,95,49,568 sched:sched_switch <------
4.019612206 4,730 faults
4.019612206 2,746 sched:sched_switch
5.039615484 3,953 faults
5.039615484 1,496 sched:sched_switch
2.000274620 1,84,46,74,40,73,70,95,47,520 faults <------
2.000274620 1,84,46,74,40,73,70,95,47,520 sched:sched_switch <------
4.000480342 4,282 faults
4.000480342 2,303 sched:sched_switch
5.000916811 1,322 faults
5.000916811 1,064 sched:sched_switch
#
prev_raw_counts is allocated when using intervals. This is used when
calculating the difference in the counts of events when using interval.
The current counts are stored in prev_raw_counts to calculate the
differences in the next iteration.
On the first interval of the second and subsequent repetitions,
prev_raw_counts would be the values stored in the last interval of the
previous repetitions, while the current counts will only be for the
first interval of the current repetition.
Hence there is a possibility of events showing up as big number.
Fix this by resetting prev_raw_counts whenever perf stat repeats the
command.
With the fix:
# perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5
2.019349347 2,597 faults
2.019349347 2,753 sched:sched_switch
4.019577372 3,098 faults
4.019577372 2,532 sched:sched_switch
5.019415481 1,879 faults
5.019415481 1,356 sched:sched_switch
2.000178813 8,468 faults
2.000178813 2,254 sched:sched_switch
4.000404621 7,440 faults
4.000404621 1,266 sched:sched_switch
5.040196079 2,458 faults
5.040196079 556 sched:sched_switch
2.000191939 6,870 faults
2.000191939 1,170 sched:sched_switch
4.000414103 541 faults
4.000414103 902 sched:sched_switch
5.000809863 450 faults
5.000809863 364 sched:sched_switch
#
Committer notes:
This was broken since the cset introducing the --interval feature, i.e.
--repeat + --interval wasn't tested at that point, add the Fixes tag so
that automatic scripts can pick this up.
Fixes: 13370a9b5b ("perf stat: Add interval printing")
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: stable@vger.kernel.org # v3.9+
Link: http://lore.kernel.org/lkml/20190904094738.9558-2-srikar@linux.vnet.ibm.com
[ Fixed up conflicts with libperf, i.e. some perf_{evsel,evlist} lost the 'perf' prefix ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0216234c2e ]
We release wrong pointer on error path in cpu_cache_level__read
function, leading to segfault:
(gdb) r record ls
Starting program: /root/perf/tools/perf/perf record ls
...
[ perf record: Woken up 1 times to write data ]
double free or corruption (out)
Thread 1 "perf" received signal SIGABRT, Aborted.
0x00007ffff7463798 in raise () from /lib64/power9/libc.so.6
(gdb) bt
#0 0x00007ffff7463798 in raise () from /lib64/power9/libc.so.6
#1 0x00007ffff7443bac in abort () from /lib64/power9/libc.so.6
#2 0x00007ffff74af8bc in __libc_message () from /lib64/power9/libc.so.6
#3 0x00007ffff74b92b8 in malloc_printerr () from /lib64/power9/libc.so.6
#4 0x00007ffff74bb874 in _int_free () from /lib64/power9/libc.so.6
#5 0x0000000010271260 in __zfree (ptr=0x7fffffffa0b0) at ../../lib/zalloc..
#6 0x0000000010139340 in cpu_cache_level__read (cache=0x7fffffffa090, cac..
#7 0x0000000010143c90 in build_caches (cntp=0x7fffffffa118, size=<optimiz..
...
Releasing the proper pointer.
Fixes: 720e98b5fa ("perf tools: Add perf data cache feature")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org: # v4.6+
Link: http://lore.kernel.org/lkml/20190912105235.10689-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9023b91dd ]
When a cpu requests broadcasting, before starting the tick broadcast
hrtimer, bc_set_next() checks if the timer callback (bc_handler) is active
using hrtimer_try_to_cancel(). But hrtimer_try_to_cancel() does not provide
the required synchronization when the callback is active on other core.
The callback could have already executed tick_handle_oneshot_broadcast()
and could have also returned. But still there is a small time window where
the hrtimer_try_to_cancel() returns -1. In that case bc_set_next() returns
without doing anything, but the next_event of the tick broadcast clock
device is already set to a timeout value.
In the race condition diagram below, CPU #1 is running the timer callback
and CPU #2 is entering idle state and so calls bc_set_next().
In the worst case, the next_event will contain an expiry time, but the
hrtimer will not be started which happens when the racing callback returns
HRTIMER_NORESTART. The hrtimer might never recover if all further requests
from the CPUs to subscribe to tick broadcast have timeout greater than the
next_event of tick broadcast clock device. This leads to cascading of
failures and finally noticed as rcu stall warnings
Here is a depiction of the race condition
CPU #1 (Running timer callback) CPU #2 (Enter idle
and subscribe to
tick broadcast)
--------------------- ---------------------
__run_hrtimer() tick_broadcast_enter()
bc_handler() __tick_broadcast_oneshot_control()
tick_handle_oneshot_broadcast()
raw_spin_lock(&tick_broadcast_lock);
dev->next_event = KTIME_MAX; //wait for tick_broadcast_lock
//next_event for tick broadcast clock
set to KTIME_MAX since no other cores
subscribed to tick broadcasting
raw_spin_unlock(&tick_broadcast_lock);
if (dev->next_event == KTIME_MAX)
return HRTIMER_NORESTART
// callback function exits without
restarting the hrtimer //tick_broadcast_lock acquired
raw_spin_lock(&tick_broadcast_lock);
tick_broadcast_set_event()
clockevents_program_event()
dev->next_event = expires;
bc_set_next()
hrtimer_try_to_cancel()
//returns -1 since the timer
callback is active. Exits without
restarting the timer
cpu_base->running = NULL;
The comment that hrtimer cannot be armed from within the callback is
wrong. It is fine to start the hrtimer from within the callback. Also it is
safe to start the hrtimer from the enter/exit idle code while the broadcast
handler is active. The enter/exit idle code and the broadcast handler are
synchronized using tick_broadcast_lock. So there is no need for the
existing try to cancel logic. All this can be removed which will eliminate
the race condition as well.
Fixes: 5d1638acb9 ("tick: Introduce hrtimer based broadcast")
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Balasubramani Vivekanandan <balasubramani_vivekanandan@mentor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190926135101.12102-2-balasubramani_vivekanandan@mentor.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c784be435d ]
The calls to arch_add_memory()/arch_remove_memory() are always made
with the read-side cpu_hotplug_lock acquired via memory_hotplug_begin().
On pSeries, arch_add_memory()/arch_remove_memory() eventually call
resize_hpt() which in turn calls stop_machine() which acquires the
read-side cpu_hotplug_lock again, thereby resulting in the recursive
acquisition of this lock.
In the absence of CONFIG_PROVE_LOCKING, we hadn't observed a system
lockup during a memory hotplug operation because cpus_read_lock() is a
per-cpu rwsem read, which, in the fast-path (in the absence of the
writer, which in our case is a CPU-hotplug operation) simply
increments the read_count on the semaphore. Thus a recursive read in
the fast-path doesn't cause any problems.
However, we can hit this problem in practice if there is a concurrent
CPU-Hotplug operation in progress which is waiting to acquire the
write-side of the lock. This will cause the second recursive read to
block until the writer finishes. While the writer is blocked since the
first read holds the lock. Thus both the reader as well as the writers
fail to make any progress thereby blocking both CPU-Hotplug as well as
Memory Hotplug operations.
Memory-Hotplug CPU-Hotplug
CPU 0 CPU 1
------ ------
1. down_read(cpu_hotplug_lock.rw_sem)
[memory_hotplug_begin]
2. down_write(cpu_hotplug_lock.rw_sem)
[cpu_up/cpu_down]
3. down_read(cpu_hotplug_lock.rw_sem)
[stop_machine()]
Lockdep complains as follows in these code-paths.
swapper/0/1 is trying to acquire lock:
(____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: stop_machine+0x2c/0x60
but task is already holding lock:
(____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: mem_hotplug_begin+0x20/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(cpu_hotplug_lock.rw_sem);
lock(cpu_hotplug_lock.rw_sem);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by swapper/0/1:
#0: (____ptrval____) (&dev->mutex){....}, at: __driver_attach+0x12c/0x1b0
#1: (____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: mem_hotplug_begin+0x20/0x50
#2: (____ptrval____) (mem_hotplug_lock.rw_sem){++++}, at: percpu_down_write+0x54/0x1a0
stack backtrace:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc5-58373-gbc99402235f3-dirty #166
Call Trace:
dump_stack+0xe8/0x164 (unreliable)
__lock_acquire+0x1110/0x1c70
lock_acquire+0x240/0x290
cpus_read_lock+0x64/0xf0
stop_machine+0x2c/0x60
pseries_lpar_resize_hpt+0x19c/0x2c0
resize_hpt_for_hotplug+0x70/0xd0
arch_add_memory+0x58/0xfc
devm_memremap_pages+0x5e8/0x8f0
pmem_attach_disk+0x764/0x830
nvdimm_bus_probe+0x118/0x240
really_probe+0x230/0x4b0
driver_probe_device+0x16c/0x1e0
__driver_attach+0x148/0x1b0
bus_for_each_dev+0x90/0x130
driver_attach+0x34/0x50
bus_add_driver+0x1a8/0x360
driver_register+0x108/0x170
__nd_driver_register+0xd0/0xf0
nd_pmem_driver_init+0x34/0x48
do_one_initcall+0x1e0/0x45c
kernel_init_freeable+0x540/0x64c
kernel_init+0x2c/0x160
ret_from_kernel_thread+0x5c/0x68
Fix this issue by
1) Requiring all the calls to pseries_lpar_resize_hpt() be made
with cpu_hotplug_lock held.
2) In pseries_lpar_resize_hpt() invoke stop_machine_cpuslocked()
as a consequence of 1)
3) To satisfy 1), in hpt_order_set(), call mmu_hash_ops.resize_hpt()
with cpu_hotplug_lock held.
Fixes: dbcf929c00 ("powerpc/pseries: Add support for hash table resizing")
Cc: stable@vger.kernel.org # v4.11+
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1557906352-29048-1-git-send-email-ego@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 553768d116 ]
This will allow the blksize to be set zero and then use 1024 as
default.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
[fix to use goto out instead of return in genl_connect]
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 567926cca9 ]
Current versions of Intel's SDM incorrectly state that "bits 31:15 of
the VM-Entry exception error-code field" must be zero. In reality, bits
31:16 must be zero, i.e. error codes are 16-bit values.
The bogus error code check manifests as an unexpected VM-Entry failure
due to an invalid code field (error number 7) in L1, e.g. when injecting
a #GP with error_code=0x9f00.
Nadav previously reported the bug[*], both to KVM and Intel, and fixed
the associated kvm-unit-test.
[*] https://patchwork.kernel.org/patch/11124749/
Reported-by: Nadav Amit <namit@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 237aed48c6 ]
When a vCPU is brought done, the XIVE VP (Virtual Processor) is first
disabled and then the event notification queues are freed. When freeing
the queues, we check for possible escalation interrupts and free them
also.
But when a XIVE VP is disabled, the underlying XIVE ENDs also are
disabled in OPAL. When an END (Event Notification Descriptor) is
disabled, its ESB pages (ESn and ESe) are disabled and loads return all
1s. Which means that any access on the ESB page of the escalation
interrupt will return invalid values.
When an interrupt is freed, the shutdown handler computes a 'saved_p'
field from the value returned by a load in xive_do_source_set_mask().
This value is incorrect for escalation interrupts for the reason
described above.
This has no impact on Linux/KVM today because we don't make use of it
but we will introduce in future changes a xive_get_irqchip_state()
handler. This handler will use the 'saved_p' field to return the state
of an interrupt and 'saved_p' being incorrect, softlockup will occur.
Fix the vCPU cleanup sequence by first freeing the escalation interrupts
if any, then disable the XIVE VP and last free the queues.
Fixes: 90c73795af ("KVM: PPC: Book3S HV: Add a new KVM device for the XIVE native exploitation mode")
Fixes: 5af5099385 ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190806172538.5087-1-clg@kaod.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ce39eb5a6 ]
In nfp_flower_spawn_vnic_reprs in the loop if initialization or the
allocations fail memory is leaked. Appropriate releases are added.
Fixes: b945245297 ("nfp: flower: add per repr private data for LAG offload")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f74914071 ]
When building with W=1, gcc properly complains that there's no prototypes:
CC kernel/elfcore.o
kernel/elfcore.c:7:17: warning: no previous prototype for 'elf_core_extra_phdrs' [-Wmissing-prototypes]
7 | Elf_Half __weak elf_core_extra_phdrs(void)
| ^~~~~~~~~~~~~~~~~~~~
kernel/elfcore.c:12:12: warning: no previous prototype for 'elf_core_write_extra_phdrs' [-Wmissing-prototypes]
12 | int __weak elf_core_write_extra_phdrs(struct coredump_params *cprm, loff_t offset)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/elfcore.c:17:12: warning: no previous prototype for 'elf_core_write_extra_data' [-Wmissing-prototypes]
17 | int __weak elf_core_write_extra_data(struct coredump_params *cprm)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
kernel/elfcore.c:22:15: warning: no previous prototype for 'elf_core_extra_data_size' [-Wmissing-prototypes]
22 | size_t __weak elf_core_extra_data_size(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Provide the include file so gcc is happy, and we don't have potential code drift
Link: http://lkml.kernel.org/r/29875.1565224705@turing-police
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 815c1560bf ]
With Java 11 there is no seperate JRE anymore.
Details:
https://coderanch.com/t/701603/java/JRE-JDK
Therefore the detection of the JRE needs to be adapted.
This change works for s390 and x86. I have not tested other platforms.
Committer testing:
Continues to work with the OpenJDK 8:
$ rm -f ~acme/lib64/libperf-jvmti.so
$ rpm -qa | grep jdk-devel
java-1.8.0-openjdk-devel-1.8.0.222.b10-0.fc30.x86_64
$ git log --oneline -1
a51937170f33 (HEAD -> perf/core) perf build: Add detection of java-11-openjdk-devel package
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; make -C tools/perf O=/tmp/build/perf install > /dev/null 2>1
$ ls -la ~acme/lib64/libperf-jvmti.so
-rwxr-xr-x. 1 acme acme 230744 Sep 24 16:46 /home/acme/lib64/libperf-jvmti.so
$
Suggested-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20190909114116.50469-4-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 714e501e16 ]
An oops can be triggered in the scheduler when running qemu on arm64:
Unable to handle kernel paging request at virtual address ffff000008effe40
Internal error: Oops: 96000007 [#1] SMP
Process migration/0 (pid: 12, stack limit = 0x00000000084e3736)
pstate: 20000085 (nzCv daIf -PAN -UAO)
pc : __ll_sc___cmpxchg_case_acq_4+0x4/0x20
lr : move_queued_task.isra.21+0x124/0x298
...
Call trace:
__ll_sc___cmpxchg_case_acq_4+0x4/0x20
__migrate_task+0xc8/0xe0
migration_cpu_stop+0x170/0x180
cpu_stopper_thread+0xec/0x178
smpboot_thread_fn+0x1ac/0x1e8
kthread+0x134/0x138
ret_from_fork+0x10/0x18
__set_cpus_allowed_ptr() will choose an active dest_cpu in affinity mask to
migrage the process if process is not currently running on any one of the
CPUs specified in affinity mask. __set_cpus_allowed_ptr() will choose an
invalid dest_cpu (dest_cpu >= nr_cpu_ids, 1024 in my virtual machine) if
CPUS in an affinity mask are deactived by cpu_down after cpumask_intersects
check. cpumask_test_cpu() of dest_cpu afterwards is overflown and may pass if
corresponding bit is coincidentally set. As a consequence, kernel will
access an invalid rq address associate with the invalid CPU in
migration_cpu_stop->__migrate_task->move_queued_task and the Oops occurs.
The reproduce the crash:
1) A process repeatedly binds itself to cpu0 and cpu1 in turn by calling
sched_setaffinity.
2) A shell script repeatedly does "echo 0 > /sys/devices/system/cpu/cpu1/online"
and "echo 1 > /sys/devices/system/cpu/cpu1/online" in turn.
3) Oops appears if the invalid CPU is set in memory after tested cpumask.
Signed-off-by: KeMeng Shi <shikemeng@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1568616808-16808-1-git-send-email-shikemeng@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59f08896f0 ]
After commit 62974fc389 ("libnvdimm: Enable unit test infrastructure
compile checks"), clang warns:
In file included from
../drivers/nvdimm/../../tools/testing/nvdimm/test/iomap.c:15:
../drivers/nvdimm/../../tools/testing/nvdimm/test/nfit_test.h:206:15:
warning: redefinition of typedef 'acpi_handle' is a C11 feature
[-Wtypedef-redefinition]
typedef void *acpi_handle;
^
../include/acpi/actypes.h:424:15: note: previous definition is here
typedef void *acpi_handle; /* Actually a ptr to a NS Node */
^
1 warning generated.
The include chain:
iomap.c ->
linux/acpi.h ->
acpi/acpi.h ->
acpi/actypes.h
nfit_test.h
Avoid this by including linux/acpi.h in nfit_test.h, which allows us to
remove both the typedef and the forward declaration of acpi_object.
Link: https://github.com/ClangBuiltLinux/linux/issues/660
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20190918042148.77553-1-natechancellor@gmail.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c42adf87e4 ]
We do check for a bad block during namespace init and that use
region bad block list. We need to initialize the bad block
for volatile regions for this to work. We also observe a lockdep
warning as below because the lock is not initialized correctly
since we skip bad block init for volatile regions.
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc1-15699-g3dee241c937e #149
Call Trace:
[c0000000f95cb250] [c00000000147dd84] dump_stack+0xe8/0x164 (unreliable)
[c0000000f95cb2a0] [c00000000022ccd8] register_lock_class+0x308/0xa60
[c0000000f95cb3a0] [c000000000229cc0] __lock_acquire+0x170/0x1ff0
[c0000000f95cb4c0] [c00000000022c740] lock_acquire+0x220/0x270
[c0000000f95cb580] [c000000000a93230] badblocks_check+0xc0/0x290
[c0000000f95cb5f0] [c000000000d97540] nd_pfn_validate+0x5c0/0x7f0
[c0000000f95cb6d0] [c000000000d98300] nd_dax_probe+0xd0/0x1f0
[c0000000f95cb760] [c000000000d9b66c] nd_pmem_probe+0x10c/0x160
[c0000000f95cb790] [c000000000d7f5ec] nvdimm_bus_probe+0x10c/0x240
[c0000000f95cb820] [c000000000d0f844] really_probe+0x254/0x4e0
[c0000000f95cb8b0] [c000000000d0fdfc] driver_probe_device+0x16c/0x1e0
[c0000000f95cb930] [c000000000d10238] device_driver_attach+0x68/0xa0
[c0000000f95cb970] [c000000000d1040c] __driver_attach+0x19c/0x1c0
[c0000000f95cb9f0] [c000000000d0c4c4] bus_for_each_dev+0x94/0x130
[c0000000f95cba50] [c000000000d0f014] driver_attach+0x34/0x50
[c0000000f95cba70] [c000000000d0e208] bus_add_driver+0x178/0x2f0
[c0000000f95cbb00] [c000000000d117c8] driver_register+0x108/0x170
[c0000000f95cbb70] [c000000000d7edb0] __nd_driver_register+0xe0/0x100
[c0000000f95cbbd0] [c000000001a6baa4] nd_pmem_driver_init+0x34/0x48
[c0000000f95cbbf0] [c0000000000106f4] do_one_initcall+0x1d4/0x4b0
[c0000000f95cbcd0] [c0000000019f499c] kernel_init_freeable+0x544/0x65c
[c0000000f95cbdb0] [c000000000010d6c] kernel_init+0x2c/0x180
[c0000000f95cbe20] [c00000000000b954] ret_from_kernel_thread+0x5c/0x68
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/20190919083355.26340-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c7aa18428 ]
When calling thermal_add_hwmon_sysfs(), the device type is sanitized by
replacing '-' with '_'. However tz->type remains unsanitized. Thus
calling thermal_hwmon_lookup_by_type() returns no device. And if there is
no device, thermal_remove_hwmon_sysfs() fails with "hwmon device lookup
failed!".
The result is unregisted hwmon devices in the sysfs.
Fixes: 409ef0baca ("thermal_hwmon: Sanitize attribute name passed to hwmon")
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae89339b08 ]
second parameter of ntb_peer_mw_get_addr is pointing to wrong memory
window index by passing "peer gidx" instead of "local gidx".
For ex, "local gidx" value is '0' and "peer gidx" value is '1', then
on peer side ntb_mw_set_trans() api is used as below with gidx pointing to
local side gidx which is '0', so memroy window '0' is chosen and XLAT '0'
will be programmed by peer side.
ntb_mw_set_trans(perf->ntb, peer->pidx, peer->gidx, peer->inbuf_xlat,
peer->inbuf_size);
Now, on local side ntb_peer_mw_get_addr() is been used as below with gidx
pointing to "peer gidx" which is '1', so pointing to memory window '1'
instead of memory window '0'.
ntb_peer_mw_get_addr(perf->ntb, peer->gidx, &phys_addr,
&peer->outbuf_size);
So this patch pass "local gidx" as parameter to ntb_peer_mw_get_addr().
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c91e3234c6 ]
LPTimer can use a 32KHz clock for counting. It depends on clock tree
configuration. In such a case, PWM output frequency range is limited.
Although unlikely, nothing prevents user from requesting a PWM frequency
above counting clock (32KHz for instance):
- This causes (prd - 1) = 0xffff to be written in ARR register later in
the apply() routine.
This results in badly configured PWM period (and also duty_cycle).
Add a check to report an error is such a case.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c47b18cf7 ]
IF the server rejected our layout return with a state error such as
NFS4ERR_BAD_STATEID, or even a stale inode error, then we do want
to clear out all the remaining layout segments and mark that stateid
as invalid.
Fixes: 1c5bd76d17 ("pNFS: Enable layoutreturn operation for...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcafbd50f2 ]
Hawaii needs to flush caches explicitly, submitting an IB in a user
VMID from kernel mode. There is no s_fence in this case.
Fixes: eb3961a574 ("drm/amdgpu: remove fence context from the job")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acab713177 ]
This un-breaks lookups in sets that have the 'dynamic' flag set.
Given this active example configuration:
table filter {
set set1 {
type ipv4_addr
size 64
flags dynamic,timeout
timeout 1m
}
chain input {
type filter hook input priority 0; policy accept;
}
}
... this works:
nft add rule ip filter input add @set1 { ip saddr }
-> whenever rule is triggered, the source ip address is inserted
into the set (if it did not exist).
This won't work:
nft add rule ip filter input ip saddr @set1 counter
Error: Could not process rule: Operation not supported
In other words, we can add entries to the set, but then can't make
matching decision based on that set.
That is just wrong -- all set backends support lookups (else they would
not be very useful).
The failure comes from an explicit rejection in nft_lookup.c.
Looking at the history, it seems like NFT_SET_EVAL used to mean
'set contains expressions' (aka. "is a meter"), for instance something like
nft add rule ip filter input meter example { ip saddr limit rate 10/second }
or
nft add rule ip filter input meter example { ip saddr counter }
The actual meaning of NFT_SET_EVAL however, is
'set can be updated from the packet path'.
'meters' and packet-path insertions into sets, such as
'add @set { ip saddr }' use exactly the same kernel code (nft_dynset.c)
and thus require a set backend that provides the ->update() function.
The only set that provides this also is the only one that has the
NFT_SET_EVAL feature flag.
Removing the wrong check makes the above example work.
While at it, also fix the flag check during set instantiation to
allow supported combinations only.
Fixes: 8aeff920dc ("netfilter: nf_tables: add stateful object reference to set elements")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
