[ Upstream commit 3e40aa29d47e231a54640addf6a09c1f64c5b63f ]
__pci_reset_bus() calls pci_bridge_secondary_bus_reset() to perform the
reset and also waits for the Secondary Bus to become again accessible.
__pci_reset_bus() then calls pci_bus_restore_locked() that restores the PCI
devices connected to the bus, and if necessary, recursively restores also
the subordinate buses and their devices.
The logic in pci_bus_restore_locked() does not take into account that after
restoring a device on one level, there might be another Link Downstream
that can only start to come up after restore has been performed for its
Downstream Port device. That is, the Link may require additional wait until
it becomes accessible.
Similarly, pci_slot_restore_locked() lacks wait.
Amend pci_bus_restore_locked() and pci_slot_restore_locked() to wait for
the Secondary Bus before recursively performing the restore of that bus.
Fixes: 090a3c5322 ("PCI: Add pci_reset_slot() and pci_reset_bus()")
Link: https://lore.kernel.org/r/20240808121708.2523-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8b908146d ]
PCIe r6.0 sec 6.6.1 prescribes that a device must be able to respond to
config requests within 1.0 s (PCI_RESET_WAIT) after exiting conventional
reset and this same delay is prescribed when coming out of D3cold (as that
involves reset too).
A device that requires more than 1 second to initialize after reset may
respond to config requests with Request Retry Status completions (sec
2.3.1), and we accommodate that in Linux with a 60 second cap
(PCIE_RESET_READY_POLL_MS).
Previously we waited up to PCIE_RESET_READY_POLL_MS only in the reset code
path, not in the resume path. However, a device has surfaced, namely Intel
Titan Ridge xHCI, which requires a longer delay also in the resume code
path.
Make the resume code path to use this same extended delay as the reset
path.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216728
Link: https://lore.kernel.org/r/20230404052714.51315-2-mika.westerberg@linux.intel.com
Reported-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lukas Wunner <lukas@wunner.de>
Stable-dep-of: 3e40aa29d47e ("PCI: Wait for Link before restoring Downstream Buses")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46d7ebfe6a75a454a5fa28604f0ef1491f9d8d14 ]
Ensure index in rtl2830_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue.
Fixes: df70ddad81 ("[media] rtl2830: implement PID filter")
Signed-off-by: Junlin Li <make24@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ae06f360cfaca2b88b98ca89144548b3186aab1 ]
Ensure index in rtl2832_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue.
Signed-off-by: Junlin Li <make24@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 4b01e01a81 ("[media] rtl2832: implement PID filter")
[hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg]
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d34b9757523c1ad547bd6d040381f62d74a3189 ]
Similar to DCLK_LCDC on RK3328, the DCLK_VOP on RK3228 is typically
parented by the hdmiphy clk and it is expected that the DCLK_VOP and
hdmiphy clk rate are kept in sync.
Use CLK_SET_RATE_PARENT and CLK_SET_RATE_NO_REPARENT flags, same as used
on RK3328, to make full use of all possible supported display modes.
Fixes: 0a9d4ac08e ("clk: rockchip: set the clock ids for RK3228 VOP")
Fixes: 307a2e9ac5 ("clk: rockchip: add clock controller for rk3228")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240615170417.3134517-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 766c386c16c9899461b83573a06380d364c6e261 ]
The initialization order of SCU clocks affects the sequence of SCU clock
resume. If there are no other effects, the earlier the initialization,
the earlier the resume. During SCU clock resume, the clock rate is
restored. As SCFW guidelines, configure the parent clock rate before
configuring the child rate.
Fixes: babfaa9556 ("clk: imx: scu: add more scu clocks")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-15-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e61352d5ecdc0da2e7253121c15d9a3e040f78a1 ]
The initialization order of SCU clocks affects the sequence of SCU clock
resume. If there are no other effects, the earlier the initialization,
the earlier the resume. During SCU clock resume, the clock rate is
restored. As SCFW guidelines, configure the parent clock rate before
configuring the child rate.
Fixes: 91e916771d ("clk: imx: scu: remove legacy scu clock binding support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-14-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d29036853b9cb07ac49e8261fca82a940be5c41 ]
On the i.MX8M*, the TF-A exposes a SiP (Silicon Provider) service
for DDR frequency scaling. The imx8m-ddrc-devfreq driver calls the
SiP and then does clk_set_parent on the DDR muxes to synchronize
the clock tree.
since commit 936c383673 ("clk: imx: fix composite peripheral flags"),
these TF-A managed muxes have SET_PARENT_GATE set, which results
in imx8m-ddrc-devfreq's clk_set_parent after SiP failing with -EBUSY:
clk_set_parent(dram_apb_src, sys1_pll_40m);(busfreq-imx8mq.c)
commit 926bf91248
("clk: imx8m: fix clock tree update of TF-A managed clocks") adds this
method and enables 8mm, 8mn and 8mq. i.MX8MP also needs it.
This is safe to do, because updating the Linux clock tree to reflect
reality will always be glitch-free.
Another reason to this patch is that powersave image BT music
requires dram to be 400MTS, so clk_set_parent(dram_alt_src,
sys1_pll_800m); is required. Without this patch, it will not succeed.
Fixes: 936c383673 ("clk: imx: fix composite peripheral flags")
Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-7-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56b8d0bf3e ]
The fracn gppll could be configured in FRAC or INTEGER mode during
hardware design. The current driver only support FRAC mode, while
this patch introduces INTEGER support. When the PLL is INTEGER pll,
there is no mfn, mfd, the calculation is as below:
Fvco_clk = (Fref / DIV[RDIV] ) * DIV[MFI]
Fclko_odiv = Fvco_clk / DIV[ODIV]
In this patch, we reuse the FRAC pll logic with some condition check to
simplify the driver
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230403095300.3386988-4-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Stable-dep-of: 7622f888fca1 ("clk: imx: fracn-gppll: fix fractional part of PLL getting lost")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f32e9dd0916eb3fd4bcf550ed1d04542a65cb9e ]
Bootloader might disable some CCM ROOT Slices. So if mcore_booted set with
display CCM ROOT disabled by Bootloader, kernel display BLK CTRL driver
imx8m_blk_ctrl_driver_init may hang the system because the BUS clk is
disabled.
Add back gate ops, but with disable doing nothing, then the CCM ROOT
will be enabled when used.
Fixes: bb7e897b00 ("clk: imx8m: check mcore_booted before register clk")
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fed6bf52c86df27ad4f39a72cdad8c27da9a50ba ]
The function “kfree” was called in up to three cases
by the function “__imx8m_clk_hw_composite” during error handling
even if the passed variables contained a null pointer.
Adjust jump targets according to the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/147ca1e6-69f3-4586-b5b3-b69f9574a862@web.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Stable-dep-of: 8f32e9dd0916 ("clk: imx: composite-8m: Enable gate clk with mcore_booted")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39c243411bdb8fb35777adf49ee32549633c4e12 ]
If sched_in event for current task is not recorded, sched_in timestamp
will be set to end_time of time window interest, causing an error in
timestamp show. In this case, we choose to ignore this event.
Test scenario:
perf[1229608] does not record the first sched_in event, run time and sch delay are both 0
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
2090450.763231 [0000] perf[1229608] 0.000 0.000 0.000
2090450.763235 [0000] migration/0[15] 0.000 0.001 0.003
2090450.763263 [0001] perf[1229608] 0.000 0.000 0.000
2090450.763268 [0001] migration/1[21] 0.000 0.001 0.004
2090450.763302 [0002] perf[1229608] 0.000 0.000 0.000
2090450.763309 [0002] migration/2[27] 0.000 0.001 0.007
2090450.763338 [0003] perf[1229608] 0.000 0.000 0.000
2090450.763343 [0003] migration/3[33] 0.000 0.001 0.004
Before:
arbitrarily specify a time window of interest, timestamp will be set to an incorrect value
# perf sched timehist --time 100,200
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
200.000000 [0000] perf[1229608] 0.000 0.000 0.000
200.000000 [0001] perf[1229608] 0.000 0.000 0.000
200.000000 [0002] perf[1229608] 0.000 0.000 0.000
200.000000 [0003] perf[1229608] 0.000 0.000 0.000
200.000000 [0004] perf[1229608] 0.000 0.000 0.000
200.000000 [0005] perf[1229608] 0.000 0.000 0.000
200.000000 [0006] perf[1229608] 0.000 0.000 0.000
200.000000 [0007] perf[1229608] 0.000 0.000 0.000
After:
# perf sched timehist --time 100,200
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
Fixes: 853b740711 ("perf sched timehist: Add option to specify time window of interest")
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819024720.2405244-1-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2615639352420e6e3115952c5b8f46846e1c6d0e ]
Currently we'll only print metric headers for metric leader in
aggregration mode. This will make `perf iostat` header not shown
since it'll aggregrated globally but don't have metric events:
root@ubuntu204:/home/yang/linux/tools/perf# ./perf stat --iostat --timeout 1000
Performance counter stats for 'system wide':
port
0000:00 0 0 0 0
0000:80 0 0 0 0
[...]
Fix this by excluding the iostat in the check of printing metric
headers. Then we can see the headers:
root@ubuntu204:/home/yang/linux/tools/perf# ./perf stat --iostat --timeout 1000
Performance counter stats for 'system wide':
port Inbound Read(MB) Inbound Write(MB) Outbound Read(MB) Outbound Write(MB)
0000:00 0 0 0 0
0000:80 0 0 0 0
[...]
Fixes: 193a9e30207f5477 ("perf stat: Don't display metric header for non-leader uncore events")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: linuxarm@huawei.com
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Cc: Zeng Tao <prime.zeng@hisilicon.com>
Link: https://lore.kernel.org/r/20240802065800.48774-1-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b3786a6c5397dc220b1483d8e2f4867743e966f ]
For all non-tracing helpers which formerly had ARG_PTR_TO_{LONG,INT} as input
arguments, zero the value for the case of an error as otherwise it could leak
memory. For tracing, it is not needed given CAP_PERFMON can already read all
kernel memory anyway hence bpf_get_func_arg() and bpf_get_func_ret() is skipped
in here.
Also, the MTU helpers mtu_len pointer value is being written but also read.
Technically, the MEM_UNINIT should not be there in order to always force init.
Removing MEM_UNINIT needs more verifier rework though: MEM_UNINIT right now
implies two things actually: i) write into memory, ii) memory does not have
to be initialized. If we lift MEM_UNINIT, it then becomes: i) read into memory,
ii) memory must be initialized. This means that for bpf_*_check_mtu() we're
readding the issue we're trying to fix, that is, it would then be able to
write back into things like .rodata BPF maps. Follow-up work will rework the
MEM_UNINIT semantics such that the intent can be better expressed. For now
just clear the *mtu_len on error path which can be lifted later again.
Fixes: 8a67f2de9b ("bpf: expose bpf_strtol and bpf_strtoul to all program types")
Fixes: d7a4cb9b67 ("bpf: Introduce bpf_strtol and bpf_strtoul helpers")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/e5edd241-59e7-5e39-0ee5-a51e31b6840a@iogearbox.net
Link: https://lore.kernel.org/r/20240913191754.13290-5-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18752d73c1898fd001569195ba4b0b8c43255f4a ]
When checking malformed helper function signatures, also take other argument
types into account aside from just ARG_PTR_TO_UNINIT_MEM.
This concerns (formerly) ARG_PTR_TO_{INT,LONG} given uninitialized memory can
be passed there, too.
The func proto sanity check goes back to commit 435faee1aa ("bpf, verifier:
add ARG_PTR_TO_RAW_STACK type"), and its purpose was to detect wrong func protos
which had more than just one MEM_UNINIT-tagged type as arguments.
The reason more than one is currently not supported is as we mark stack slots with
STACK_MISC in check_helper_call() in case of raw mode based on meta.access_size to
allow uninitialized stack memory to be passed to helpers when they just write into
the buffer.
Probing for base type as well as MEM_UNINIT tagging ensures that other types do not
get missed (as it used to be the case for ARG_PTR_TO_{INT,LONG}).
Fixes: 57c3bb725a ("bpf: Introduce ARG_PTR_TO_{INT,LONG} arg types")
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20240913191754.13290-4-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfe69c50b05510b24e26ccb427c7cc70beafd6c1 ]
The bpf_strtol() and bpf_strtoul() helpers are currently broken on 32bit:
The argument type ARG_PTR_TO_LONG is BPF-side "long", not kernel-side "long"
and therefore always considered fixed 64bit no matter if 64 or 32bit underlying
architecture.
This contract breaks in case of the two mentioned helpers since their BPF_CALL
definition for the helpers was added with {unsigned,}long *res. Meaning, the
transition from BPF-side "long" (BPF program) to kernel-side "long" (BPF helper)
breaks here.
Both helpers call __bpf_strtoll() with "long long" correctly, but later assigning
the result into 32-bit "*(long *)" on 32bit architectures. From a BPF program
point of view, this means upper bits will be seen as uninitialised.
Therefore, fix both BPF_CALL signatures to {s,u}64 types to fix this situation.
Now, changing also uapi/bpf.h helper documentation which generates bpf_helper_defs.h
for BPF programs is tricky: Changing signatures there to __{s,u}64 would trigger
compiler warnings (incompatible pointer types passing 'long *' to parameter of type
'__s64 *' (aka 'long long *')) for existing BPF programs.
Leaving the signatures as-is would be fine as from BPF program point of view it is
still BPF-side "long" and thus equivalent to __{s,u}64 on 64 or 32bit underlying
architectures.
Note that bpf_strtol() and bpf_strtoul() are the only helpers with this issue.
Fixes: d7a4cb9b67 ("bpf: Introduce bpf_strtol and bpf_strtoul helpers")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/481fcec8-c12c-9abb-8ecb-76c71c009959@iogearbox.net
Link: https://lore.kernel.org/r/20240913191754.13290-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9c96351aa6718b42a9f42eaf7adce0356bdb5e8 ]
The function nilfs_btree_check_delete(), which checks whether degeneration
to direct mapping occurs before deleting a b-tree entry, causes memory
access outside the block buffer when retrieving the maximum key if the
root node has no entries.
This does not usually happen because b-tree mappings with 0 child nodes
are never created by mkfs.nilfs2 or nilfs2 itself. However, it can happen
if the b-tree root node read from a device is configured that way, so fix
this potential issue by adding a check for that case.
Link: https://lkml.kernel.org/r/20240904081401.16682-4-konishi.ryusuke@gmail.com
Fixes: 17c76b0104 ("nilfs2: B-tree based block mapping")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Lizhi Xu <lizhi.xu@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 111b812d3662f3a1b831d19208f83aa711583fe6 ]
Due to the nature of b-trees, nilfs2 itself and admin tools such as
mkfs.nilfs2 will never create an intermediate b-tree node block with 0
child nodes, nor will they delete (key, pointer)-entries that would result
in such a state. However, it is possible that a b-tree node block is
corrupted on the backing device and is read with 0 child nodes.
Because operation is not guaranteed if the number of child nodes is 0 for
intermediate node blocks other than the root node, modify
nilfs_btree_node_broken(), which performs sanity checks when reading a
b-tree node block, so that such cases will be judged as metadata
corruption.
Link: https://lkml.kernel.org/r/20240904081401.16682-3-konishi.ryusuke@gmail.com
Fixes: 17c76b0104 ("nilfs2: B-tree based block mapping")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Lizhi Xu <lizhi.xu@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9403001ad65ae4f4c5de368bdda3a0636b51d51a ]
Patch series "nilfs2: fix potential issues with empty b-tree nodes".
This series addresses three potential issues with empty b-tree nodes that
can occur with corrupted filesystem images, including one recently
discovered by syzbot.
This patch (of 3):
If a b-tree is broken on the device, and the b-tree height is greater than
2 (the level of the root node is greater than 1) even if the number of
child nodes of the b-tree root is 0, a NULL pointer dereference occurs in
nilfs_btree_prepare_insert(), which is called from nilfs_btree_insert().
This is because, when the number of child nodes of the b-tree root is 0,
nilfs_btree_do_lookup() does not set the block buffer head in any of
path[x].bp_bh, leaving it as the initial value of NULL, but if the level
of the b-tree root node is greater than 1, nilfs_btree_get_nonroot_node(),
which accesses the buffer memory of path[x].bp_bh, is called.
Fix this issue by adding a check to nilfs_btree_root_broken(), which
performs sanity checks when reading the root node from the device, to
detect this inconsistency.
Thanks to Lizhi Xu for trying to solve the bug and clarifying the cause
early on.
Link: https://lkml.kernel.org/r/20240904081401.16682-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20240902084101.138971-1-lizhi.xu@windriver.com
Link: https://lkml.kernel.org/r/20240904081401.16682-2-konishi.ryusuke@gmail.com
Fixes: 17c76b0104 ("nilfs2: B-tree based block mapping")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+9bff4c7b992038a7409f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9bff4c7b992038a7409f
Cc: Lizhi Xu <lizhi.xu@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d231b91a944f3cab355fce65af5871fb5d7735b ]
In case of errors when reading an inode from disk or traversing inline
directory entries, return an error-encoded ERR_PTR instead of returning
NULL. ext4_find_inline_entry only caller, __ext4_find_entry already returns
such encoded errors.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/20240821152324.3621860-3-cascardo@igalia.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: c6b72f5d82b1 ("ext4: avoid OOB when system.data xattr changes underneath the filesystem")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb0a12c3439b10d88412fd3102df5b9a6e3cd6dc ]
min_clusters is signed integer and will be converted to unsigned
integer when compared with unsigned number stats.free_clusters.
If min_clusters is negative, it will be converted to a huge unsigned
value in which case all groups may not meet the actual desired free
clusters.
Set negative min_clusters to 0 to avoid unexpected behavior.
Fixes: ac27a0ec11 ("[PATCH] ext4: initial copy of files from ext3")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://patch.msgid.link/20240820132234.2759926-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 227d31b9214d1b9513383cf6c7180628d4b3b61f ]
If a group is marked EXT4_GROUP_INFO_IBITMAP_CORRUPT after it's inode
bitmap buffer_head was successfully verified, then __ext4_new_inode()
will get a valid inode_bitmap_bh of a corrupted group from
ext4_read_inode_bitmap() in which case inode_bitmap_bh misses a release.
Hnadle "IS_ERR(inode_bitmap_bh)" and group corruption separately like
how ext4_free_inode() does to avoid buffer_head leak.
Fixes: 9008a58e5d ("ext4: make the bitmap read routines return real error codes")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://patch.msgid.link/20240820132234.2759926-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2749749afa071f8a0e405605de9da615e771a7ce ]
In the `smk_set_cipso` function, the `skp->smk_netlabel.attr.mls.cat`
field is directly assigned to a new value without using the appropriate
RCU pointer assignment functions. According to RCU usage rules, this is
illegal and can lead to unpredictable behavior, including data
inconsistencies and impossible-to-diagnose memory corruption issues.
This possible bug was identified using a static analysis tool developed
by myself, specifically designed to detect RCU-related issues.
To address this, the assignment is now done using rcu_assign_pointer(),
which ensures that the pointer assignment is done safely, with the
necessary memory barriers and synchronization. This change prevents
potential RCU dereference issues by ensuring that the `cat` field is
safely updated while still adhering to RCU's requirements.
Fixes: 0817534ff9 ("smackfs: Fix use-after-free in netlbl_catmap_walk()")
Signed-off-by: Jiawei Ye <jiawei.ye@foxmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20cee68f5b44fdc2942d20f3172a262ec247b117 ]
Commit 3d56b8d2c7 ("ext4: Speed up FITRIM by recording flags in
ext4_group_info") speed up fstrim by skipping trim trimmed group. We
also has the chance to clear trimmed once there exists some block free
for this group(mount without discard), and the next trim for this group
will work well too.
For mount with discard, we will issue dicard when we free blocks, so
leave trimmed flag keep alive to skip useless trim trigger from
userspace seems reasonable. But for some case like ext4 build on
dm-thinpool(ext4 blocksize 4K, pool blocksize 128K), discard from ext4
maybe unaligned for dm thinpool, and thinpool will just finish this
discard(see process_discard_bio when begein equals to end) without
actually process discard. For this case, trim from userspace can really
help us to free some thinpool block.
So convert to clear trimmed flag for all case no matter mounted with
discard or not.
Fixes: 3d56b8d2c7 ("ext4: Speed up FITRIM by recording flags in ext4_group_info")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240817085510.2084444-1-yangerkun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e16c7b07784f3fb03025939c4590b9a7c64970a7 ]
When analyzing a kernel waring message, Peter pointed out that there is a
race condition when the kworker is being frozen and falls into
try_to_freeze() with TASK_INTERRUPTIBLE, which could trigger a
might_sleep() warning in try_to_freeze(). Although the root cause is not
related to freeze()[1], it is still worthy to fix this issue ahead.
One possible race scenario:
CPU 0 CPU 1
----- -----
// kthread_worker_fn
set_current_state(TASK_INTERRUPTIBLE);
suspend_freeze_processes()
freeze_processes
static_branch_inc(&freezer_active);
freeze_kernel_threads
pm_nosig_freezing = true;
if (work) { //false
__set_current_state(TASK_RUNNING);
} else if (!freezing(current)) //false, been frozen
freezing():
if (static_branch_unlikely(&freezer_active))
if (pm_nosig_freezing)
return true;
schedule()
}
// state is still TASK_INTERRUPTIBLE
try_to_freeze()
might_sleep() <--- warning
Fix this by explicitly set the TASK_RUNNING before entering
try_to_freeze().
Link: https://lore.kernel.org/lkml/Zs2ZoAcUsZMX2B%2FI@chenyu5-mobl2/ [1]
Link: https://lkml.kernel.org/r/20240827112308.181081-1-yu.c.chen@intel.com
Fixes: b56c0d8937 ("kthread: implement kthread_worker")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: David Gow <davidgow@google.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d2786d65aaa954ebd3fcc033ada433e10da21c4 ]
In case of malformed relocation record of kind BPF_CORE_TYPE_ID_LOCAL
referencing a non-existing BTF type, function bpf_core_calc_relo_insn
would cause a null pointer deference.
Fix this by adding a proper check upper in call stack, as malformed
relocation records could be passed from user space.
Simplest reproducer is a program:
r0 = 0
exit
With a single relocation record:
.insn_off = 0, /* patch first instruction */
.type_id = 100500, /* this type id does not exist */
.access_str_off = 6, /* offset of string "0" */
.kind = BPF_CORE_TYPE_ID_LOCAL,
See the link for original reproducer or next commit for a test case.
Fixes: 74753e1462 ("libbpf: Replace btf__type_by_id() with btf_type_by_id().")
Reported-by: Liu RuiTong <cnitlrt@gmail.com>
Closes: https://lore.kernel.org/bpf/CAK55_s6do7C+DVwbwY_7nKfUz0YLDoiA1v6X3Y9+p0sWzipFSA@mail.gmail.com/
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822080124.2995724-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9a83e76b5a96801a2c7ea0a79ca77c356d8b38d ]
Include GNU <execinfo.h> header only with glibc and provide weak, stubbed
backtrace functions as a fallback in test_progs.c. This allows for non-GNU
replacements while avoiding compile errors (e.g. with musl libc) like:
test_progs.c:13:10: fatal error: execinfo.h: No such file or directory
13 | #include <execinfo.h> /* backtrace */
| ^~~~~~~~~~~~
test_progs.c: In function 'crash_handler':
test_progs.c:1034:14: error: implicit declaration of function 'backtrace' [-Werror=implicit-function-declaration]
1034 | sz = backtrace(bt, ARRAY_SIZE(bt));
| ^~~~~~~~~
test_progs.c:1045:9: error: implicit declaration of function 'backtrace_symbols_fd' [-Werror=implicit-function-declaration]
1045 | backtrace_symbols_fd(bt, sz, STDERR_FILENO);
| ^~~~~~~~~~~~~~~~~~~~
Fixes: 9fb156bb82 ("selftests/bpf: Print backtrace on SIGSEGV in test_progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/aa6dc8e23710cb457b278039d0081de7e7b4847d.1722244708.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45db310984 ]
Moving test_progs helpers to testing_helpers object so they can be
used from test_verifier in following changes.
Also adding missing ifndef header guard to testing_helpers.h header.
Using stderr instead of env.stderr because un/load_bpf_testmod helpers
will be used outside test_progs. Also at the point of calling them
in test_progs the std files are not hijacked yet and stderr is the
same as env.stderr.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: c9a83e76b5a9 ("selftests/bpf: Fix compile if backtrace support missing in libc")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa95073fd290b5b3e45f067fa22bb25e59e1ff7c ]
While building, bpftool makes a skeleton from test_core_extern.c, which
itself includes <stdbool.h> and uses the 'bool' type. However, the skeleton
test_core_extern.skel.h generated *does not* include <stdbool.h> or use the
'bool' type, instead using the C-only '_Bool' type. Compiling test_cpp.cpp
with g++ 12.3 for mips64el/musl-libc then fails with error:
In file included from test_cpp.cpp:9:
test_core_extern.skel.h:45:17: error: '_Bool' does not name a type
45 | _Bool CONFIG_BOOL;
| ^~~~~
This was likely missed previously because glibc uses a GNU extension for
<stdbool.h> with C++ (#define _Bool bool), not supported by musl libc.
Normally, a C fragment would include <stdbool.h> and use the 'bool' type,
and thus cleanly work after import by C++. The ideal fix would be for
'bpftool gen skeleton' to output the correct type/include supporting C++,
but in the meantime add a conditional define as above.
Fixes: 7c8dce4b16 ("bpftool: Make skeleton C code compilable with C++ compiler")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/6fc1dd28b8bda49e51e4f610bdc9d22f4455632d.1722244708.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cacf2a5a78cd1f5f616eae043ebc6f024104b721 ]
Although the post-increment in macro 'CPU_SET(next++, &cpuset)' seems safe,
the sequencing can raise compile errors, so move the increment outside the
macro. This avoids an error seen using gcc 12.3.0 for mips64el/musl-libc:
In file included from test_lru_map.c:11:
test_lru_map.c: In function 'sched_next_online':
test_lru_map.c:129:29: error: operation on 'next' may be undefined [-Werror=sequence-point]
129 | CPU_SET(next++, &cpuset);
| ^
cc1: all warnings being treated as errors
Fixes: 3fbfadce60 ("bpf: Fix test_lru_sanity5() in test_lru_map.c")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/22993dfb11ccf27925a626b32672fd3324cb76c4.1722244708.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 730561d3c08d4a327cceaabf11365958a1c00cec ]
Remove a redundant include of '<asm/types.h>', whose needed definitions are
already included (via '<linux/types.h>') in cg_storage_multi_egress_only.c,
cg_storage_multi_isolated.c, and cg_storage_multi_shared.c. This avoids
redefinition errors seen compiling for mips64el/musl-libc like:
In file included from progs/cg_storage_multi_egress_only.c:13:
In file included from progs/cg_storage_multi.h:6:
In file included from /usr/mips64el-linux-gnuabi64/include/asm/types.h:23:
/usr/include/asm-generic/int-l64.h:29:25: error: typedef redefinition with different types ('long' vs 'long long')
29 | typedef __signed__ long __s64;
| ^
/usr/include/asm-generic/int-ll64.h:30:44: note: previous definition is here
30 | __extension__ typedef __signed__ long long __s64;
| ^
Fixes: 9e5bd1f763 ("selftests/bpf: Test CGROUP_STORAGE map can't be used by multiple progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/4f4702e9f6115b7f84fea01b2326ca24c6df7ba8.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit debfa4f628f271f72933bf38d581cc53cfe1def5 ]
The type 'loff_t' is a GNU extension and not exposed by the musl 'fcntl.h'
header unless _GNU_SOURCE is defined. Add this definition to fix errors
seen compiling for mips64el/musl-libc:
In file included from tools/testing/selftests/bpf/prog_tests/core_reloc.c:4:
./bpf_testmod/bpf_testmod.h:10:9: error: unknown type name 'loff_t'
10 | loff_t off;
| ^~~~~~
./bpf_testmod/bpf_testmod.h:16:9: error: unknown type name 'loff_t'
16 | loff_t off;
| ^~~~~~
Fixes: 6bcd39d366 ("selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/11c3af75a7eb6bcb7ad9acfae6a6f470c572eb82.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18826fb0b79c3c3cd1fe765d85f9c6f1a902c722 ]
The GNU version of 'struct tcp_info' in 'netinet/tcp.h' is not exposed by
musl headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
tcp_rtt.c: In function 'wait_for_ack':
tcp_rtt.c:24:25: error: storage size of 'info' isn't known
24 | struct tcp_info info;
| ^~~~
tcp_rtt.c:24:25: error: unused variable 'info' [-Werror=unused-variable]
cc1: all warnings being treated as errors
Fixes: 1f4f80fed2 ("selftests/bpf: test_progs: convert test_tcp_rtt")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/f2329767b15df206f08a5776d35a47c37da855ae.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e4c43bcb85973243d7274e0058b6e8f5810e4f7 ]
The GNU version of 'struct tcphdr' has members 'doff', 'source' and 'dest',
which are not exposed by musl libc headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
flow_dissector.c:118:30: error: 'struct tcphdr' has no member named 'doff'
118 | .tcp.doff = 5,
| ^~~~
flow_dissector.c:119:30: error: 'struct tcphdr' has no member named 'source'
119 | .tcp.source = 80,
| ^~~~~~
flow_dissector.c:120:30: error: 'struct tcphdr' has no member named 'dest'
120 | .tcp.dest = 8080,
| ^~~~
Fixes: ae173a9157 ("selftests/bpf: support BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8f7ab21a73f678f9cebd32b26c444a686e57414d.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
