[ Upstream commit 705c79101ccf9edea5a00d761491a03ced314210 ]
A race condition can occur in cifs_oplock_break() leading to a
use-after-free of the cinode structure when unmounting:
cifs_oplock_break()
_cifsFileInfo_put(cfile)
cifsFileInfo_put_final()
cifs_sb_deactive()
[last ref, start releasing sb]
kill_sb()
kill_anon_super()
generic_shutdown_super()
evict_inodes()
dispose_list()
evict()
destroy_inode()
call_rcu(&inode->i_rcu, i_callback)
spin_lock(&cinode->open_file_lock) <- OK
[later] i_callback()
cifs_free_inode()
kmem_cache_free(cinode)
spin_unlock(&cinode->open_file_lock) <- UAF
cifs_done_oplock_break(cinode) <- UAF
The issue occurs when umount has already released its reference to the
superblock. When _cifsFileInfo_put() calls cifs_sb_deactive(), this
releases the last reference, triggering the immediate cleanup of all
inodes under RCU. However, cifs_oplock_break() continues to access the
cinode after this point, resulting in use-after-free.
Fix this by holding an extra reference to the superblock during the
entire oplock break operation. This ensures that the superblock and
its inodes remain valid until the oplock break completes.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220309
Fixes: b98749cac4 ("CIFS: keep FileInfo handle live during oplock break")
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e28d5a3f774f118896aec17a3a20a9c5c9dfc64 ]
A race condition can occur when 'agg' is modified in qfq_change_agg
(called during qfq_enqueue) while other threads access it
concurrently. For example, qfq_dump_class may trigger a NULL
dereference, and qfq_delete_class may cause a use-after-free.
This patch addresses the issue by:
1. Moved qfq_destroy_class into the critical section.
2. Added sch_tree_lock protection to qfq_dump_class and
qfq_dump_class_stats.
Fixes: 462dbc9101 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3051247e4faa32a3d90c762a243c2c62dde310db ]
The kobject for the queue, `disk->queue_kobj`, is initialized with a
reference count of 1 via `kobject_init()` in `blk_register_queue()`.
While `kobject_del()` is called during the unregister path to remove
the kobject from sysfs, the initial reference is never released.
Add a call to `kobject_put()` in `blk_unregister_queue()` to properly
decrement the reference count and fix the leak.
Fixes: 2bd85221a6 ("block: untangle request_queue refcounting from sysfs")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250711083009.2574432-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7727ec1523d7973defa1dff8f9c0aad288d04008 ]
Add missing post-increment operators for byte pointers in the
loop that copies remaining bytes in xemaclite_aligned_read().
Without the increment, the same byte was written repeatedly
to the destination.
This update aligns with xemaclite_aligned_write()
Fixes: bb81b2ddfa ("net: add Xilinx emac lite device driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250710173849.2381003-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b89819b06d8d339da414f06ef3242f79508be5e ]
In __cachefiles_write(), if the return value of the write operation > 0, it
is set to 0. This makes it impossible to distinguish scenarios where a
partial write has occurred, and will affect the outer calling functions:
1) cachefiles_write_complete() will call "term_func" such as
netfs_write_subrequest_terminated(). When "ret" in __cachefiles_write()
is used as the "transferred_or_error" of this function, it can not
distinguish the amount of data written, makes the WARN meaningless.
2) cachefiles_ondemand_fd_write_iter() can only assume all writes were
successful by default when "ret" is 0, and unconditionally return the full
length specified by user space.
Fix it by modifying "ret" to reflect the actual number of bytes written.
Furthermore, returning a value greater than 0 from __cachefiles_write()
does not affect other call paths, such as cachefiles_issue_write() and
fscache_write().
Fixes: 047487c947 ("cachefiles: Implement the I/O routines")
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Link: https://lore.kernel.org/20250703024418.2809353-1-wozizhi@huaweicloud.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8242745871f81a3ac37f9f51853d12854fd0b58 ]
static const char fmt[] = "%p%";
bpf_trace_printk(fmt, sizeof(fmt));
The above BPF program isn't rejected and causes a kernel warning at
runtime:
Please remove unsupported %\x00 in format string
WARNING: CPU: 1 PID: 7244 at lib/vsprintf.c:2680 format_decode+0x49c/0x5d0
This happens because bpf_bprintf_prepare skips over the second %,
detected as punctuation, while processing %p. This patch fixes it by
not skipping over punctuation. %\x00 is then processed in the next
iteration and rejected.
Reported-by: syzbot+e2c932aec5c8a6e1d31c@syzkaller.appspotmail.com
Fixes: 48cac3f4a9 ("bpf: Implement formatted output helpers with bstr_printf")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/a0e06cc479faec9e802ae51ba5d66420523251ee.1751395489.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 46d8c744136ce2454aa4c35c138cc06817f92b8e upstream.
Some Comedi subdevice instruction handlers are known to access
instruction data elements beyond the first `insn->n` elements in some
cases. The `do_insn_ioctl()` and `do_insnlist_ioctl()` functions
allocate at least `MIN_SAMPLES` (16) data elements to deal with this,
but they do not initialize all of that. For Comedi instruction codes
that write to the subdevice, the first `insn->n` data elements are
copied from user-space, but the remaining elements are left
uninitialized. That could be a problem if the subdevice instruction
handler reads the uninitialized data. Ensure that the first
`MIN_SAMPLES` elements are initialized before calling these instruction
handlers, filling the uncopied elements with 0. For
`do_insnlist_ioctl()`, the same data buffer elements are used for
handling a list of instructions, so ensure the first `MIN_SAMPLES`
elements are initialized for each instruction that writes to the
subdevice.
Fixes: ed9eccbe89 ("Staging: add comedi core")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250707161439.88385-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9cb26291d009243a4478a7ffb37b3a9175bfce9 upstream.
For Comedi `INSN_READ` and `INSN_WRITE` instructions on "digital"
subdevices (subdevice types `COMEDI_SUBD_DI`, `COMEDI_SUBD_DO`, and
`COMEDI_SUBD_DIO`), it is common for the subdevice driver not to have
`insn_read` and `insn_write` handler functions, but to have an
`insn_bits` handler function for handling Comedi `INSN_BITS`
instructions. In that case, the subdevice's `insn_read` and/or
`insn_write` function handler pointers are set to point to the
`insn_rw_emulate_bits()` function by `__comedi_device_postconfig()`.
For `INSN_WRITE`, `insn_rw_emulate_bits()` currently assumes that the
supplied `data[0]` value is a valid copy from user memory. It will at
least exist because `do_insnlist_ioctl()` and `do_insn_ioctl()` in
"comedi_fops.c" ensure at lease `MIN_SAMPLES` (16) elements are
allocated. However, if `insn->n` is 0 (which is allowable for
`INSN_READ` and `INSN_WRITE` instructions, then `data[0]` may contain
uninitialized data, and certainly contains invalid data, possibly from a
different instruction in the array of instructions handled by
`do_insnlist_ioctl()`. This will result in an incorrect value being
written to the digital output channel (or to the digital input/output
channel if configured as an output), and may be reflected in the
internal saved state of the channel.
Fix it by returning 0 early if `insn->n` is 0, before reaching the code
that accesses `data[0]`. Previously, the function always returned 1 on
success, but it is supposed to be the number of data samples actually
read or written up to `insn->n`, which is 0 in this case.
Reported-by: syzbot+cb96ec476fb4914445c9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cb96ec476fb4914445c9
Fixes: ed9eccbe89 ("Staging: add comedi core")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250707153355.82474-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab705c8c35e18652abc6239c07cf3441f03e2cda upstream.
Correct some left shifts of the signed integer constant 1 by some
unsigned number less than 32. Change the constant to 1U to avoid
shifting a 1 into the sign bit.
The corrected functions are comedi_dio_insn_config(),
comedi_dio_update_state(), and __comedi_device_postconfig().
Fixes: e523c6c862 ("staging: comedi: drivers: introduce comedi_dio_insn_config()")
Fixes: 05e60b13a3 ("staging: comedi: drivers: introduce comedi_dio_update_state()")
Fixes: 09567cb437 ("staging: comedi: initialize subdevice s->io_bits in postconfig")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250707121555.65424-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08ae4b20f5e82101d77326ecab9089e110f224cc upstream.
The handling of the `COMEDI_INSNLIST` ioctl allocates a kernel buffer to
hold the array of `struct comedi_insn`, getting the length from the
`n_insns` member of the `struct comedi_insnlist` supplied by the user.
The allocation will fail with a WARNING and a stack dump if it is too
large.
Avoid that by failing with an `-EINVAL` error if the supplied `n_insns`
value is unreasonable.
Define the limit on the `n_insns` value in the `MAX_INSNS` macro. Set
this to the same value as `MAX_SAMPLES` (65536), which is the maximum
allowed sum of the values of the member `n` in the array of `struct
comedi_insn`, and sensible comedi instructions will have an `n` of at
least 1.
Reported-by: syzbot+d6995b62e5ac7d79557a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d6995b62e5ac7d79557a
Fixes: ed9eccbe89 ("Staging: add comedi core")
Tested-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250704120405.83028-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70f2b28b5243df557f51c054c20058ae207baaac upstream.
When checking for a supported IRQ number, the following test is used:
/* IRQs 2,3,5,6,7, 10,11,15 are valid for "enhanced" mode */
if ((1 << it->options[1]) & 0x8cec) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts.
Fixes: 79e5e6addb ("staging: comedi: das6402: rewrite broken driver")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250707135737.77448-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66acb1586737a22dd7b78abc63213b1bcaa100e4 upstream.
When checking for a supported IRQ number, the following test is used:
if ((1 << it->options[1]) & 0xdcfc) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts.
Fixes: ad7a370c8b ("staging: comedi: aio_iiro_16: add command support for change of state detection")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250707134622.75403-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d8d7c1dbc46aa07a76acab7336a42ddd900be10 upstream.
The IIO core issues warnings when a scan mask is a subset of a previous
entry in the available_scan_masks array.
On a board using a MAX11601, the following warning is observed:
max1363 1-0064: available_scan_mask 7 subset of 6. Never used
This occurs because the entries in the max11607_mode_list[] array are not
ordered correctly. To fix this, reorder the entries so that no scan mask is
a subset of an earlier one.
While at it, reorder the mode_list[] arrays for other supported chips as
well, to prevent similar warnings on different variants.
Note fixes tag dropped as these were introduced over many commits a long
time back and the side effect until recently was a reduction in sampling
rate due to reading too many channels when only a few were desired.
Now we have a sanity check that reports this error but that is not
where the issue was introduced.
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20250516173900.677821-2-festevam@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d21f2c2dd843bceefd9455f2919f6bb526797f0 upstream.
Since commit 2718f15403fb ("iio: sanity check available_scan_masks array"),
booting a board populated with a MAX11601 results in a flood of warnings:
max1363 1-0064: available_scan_mask 8 subset of 0. Never used
max1363 1-0064: available_scan_mask 9 subset of 0. Never used
max1363 1-0064: available_scan_mask 10 subset of 0. Never used
max1363 1-0064: available_scan_mask 11 subset of 0. Never used
max1363 1-0064: available_scan_mask 12 subset of 0. Never used
max1363 1-0064: available_scan_mask 13 subset of 0. Never used
...
These warnings are caused by incorrect offsets used for differential
channels in the MAX1363_4X_CHANS() and MAX1363_8X_CHANS() macros.
The max1363_mode_table[] defines the differential channel mappings as
follows:
MAX1363_MODE_DIFF_SINGLE(0, 1, 1 << 12),
MAX1363_MODE_DIFF_SINGLE(2, 3, 1 << 13),
MAX1363_MODE_DIFF_SINGLE(4, 5, 1 << 14),
MAX1363_MODE_DIFF_SINGLE(6, 7, 1 << 15),
MAX1363_MODE_DIFF_SINGLE(8, 9, 1 << 16),
MAX1363_MODE_DIFF_SINGLE(10, 11, 1 << 17),
MAX1363_MODE_DIFF_SINGLE(1, 0, 1 << 18),
MAX1363_MODE_DIFF_SINGLE(3, 2, 1 << 19),
MAX1363_MODE_DIFF_SINGLE(5, 4, 1 << 20),
MAX1363_MODE_DIFF_SINGLE(7, 6, 1 << 21),
MAX1363_MODE_DIFF_SINGLE(9, 8, 1 << 22),
MAX1363_MODE_DIFF_SINGLE(11, 10, 1 << 23),
Update the macros to follow this same pattern, ensuring that the scan masks
are valid and preventing the warnings.
Cc: stable@vger.kernel.org
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20250516173900.677821-1-festevam@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1fe16dc1a2f5057772e5391ec042ed7442966c9a upstream.
fxls8962af_fifo_flush() uses indio_dev->active_scan_mask (with
iio_for_each_active_channel()) without making sure the indio_dev
stays in buffer mode.
There is a race if indio_dev exits buffer mode in the middle of the
interrupt that flushes the fifo. Fix this by calling
synchronize_irq() to ensure that no interrupt is currently running when
disabling buffer mode.
Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read
[...]
_find_first_bit_le from fxls8962af_fifo_flush+0x17c/0x290
fxls8962af_fifo_flush from fxls8962af_interrupt+0x80/0x178
fxls8962af_interrupt from irq_thread_fn+0x1c/0x7c
irq_thread_fn from irq_thread+0x110/0x1f4
irq_thread from kthread+0xe0/0xfc
kthread from ret_from_fork+0x14/0x2c
Fixes: 79e3a5bdd9 ("iio: accel: fxls8962af: add hw buffered sampling")
Cc: stable@vger.kernel.org
Suggested-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250603-fxlsrace-v2-1-5381b36ba1db@geanix.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b220bed63330c0e1733dc06ea8e75d5b9962b6b6 upstream.
The CVE-2024-50047 fix removed asynchronous crypto handling from
crypt_message(), assuming all crypto operations are synchronous.
However, when hardware crypto accelerators are used, this can cause
use-after-free crashes:
crypt_message()
// Allocate the creq buffer containing the req
creq = smb2_get_aead_req(..., &req);
// Async encryption returns -EINPROGRESS immediately
rc = enc ? crypto_aead_encrypt(req) : crypto_aead_decrypt(req);
// Free creq while async operation is still in progress
kvfree_sensitive(creq, ...);
Hardware crypto modules often implement async AEAD operations for
performance. When crypto_aead_encrypt/decrypt() returns -EINPROGRESS,
the operation completes asynchronously. Without crypto_wait_req(),
the function immediately frees the request buffer, leading to crashes
when the driver later accesses the freed memory.
This results in a use-after-free condition when the hardware crypto
driver later accesses the freed request structure, leading to kernel
crashes with NULL pointer dereferences.
The issue occurs because crypto_alloc_aead() with mask=0 doesn't
guarantee synchronous operation. Even without CRYPTO_ALG_ASYNC in
the mask, async implementations can be selected.
Fix by restoring the async crypto handling:
- DECLARE_CRYPTO_WAIT(wait) for completion tracking
- aead_request_set_callback() for async completion notification
- crypto_wait_req() to wait for operation completion
This ensures the request buffer isn't freed until the crypto operation
completes, whether synchronous or asynchronous, while preserving the
CVE-2024-50047 fix.
Fixes: b0abcd65ec54 ("smb: client: fix UAF in async decryption")
Link: https://lore.kernel.org/all/8b784a13-87b0-4131-9ff9-7a8993538749@huaweicloud.com/
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 500ba33284416255b9a5b50ace24470b6fe77ea5 upstream.
pm_domain_cpu_gov is selecting a cluster idle state but does not consider
latency tolerance of child CPUs. This results in deeper cluster idle state
whose latency does not meet latency tolerance requirement.
Select deeper idle state only if global and device latency tolerance of all
child CPUs meet.
Test results on SM8750 with 300 usec PM-QoS on CPU0 which is less than
domain idle state entry (2150) + exit (1983) usec latency mentioned in
devicetree, demonstrate the issue.
# echo 300 > /sys/devices/system/cpu/cpu0/power/pm_qos_resume_latency_us
Before: (Usage is incrementing)
======
# cat /sys/kernel/debug/pm_genpd/power-domain-cluster0/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 29817 537 8 270 0
# cat /sys/kernel/debug/pm_genpd/power-domain-cluster0/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 30348 542 8 271 0
After: (Usage is not incrementing due to latency tolerance)
======
# cat /sys/kernel/debug/pm_genpd/power-domain-cluster0/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 39319 626 14 307 0
# cat /sys/kernel/debug/pm_genpd/power-domain-cluster0/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 39319 626 14 307 0
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Fixes: e94999688e ("PM / Domains: Add genpd governor for CPUs")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250709-pmdomain_qos-v2-1-976b12257899@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fd77cc6bd9b368431a815a780e407b7781bcca0 upstream.
The wx_rx_buffer structure contained two DMA address fields: 'dma' and
'page_dma'. However, only 'page_dma' was actually initialized and used
to program the Rx descriptor. But 'dma' was uninitialized and used in
some paths.
This could lead to undefined behavior, including DMA errors or
use-after-free, if the uninitialized 'dma' was used. Althrough such
error has not yet occurred, it is worth fixing in the code.
Fixes: 3c47e8ae11 ("net: libwx: Support to receive packets in NAPI")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250714024755.17512-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21b34a3a204ed616373a12ec17dc127ebe51eab3 upstream.
A new warning in clang [1] points out that id_reg is uninitialized then
passed to memstick_init_req() as a const pointer:
drivers/memstick/core/memstick.c:330:59: error: variable 'id_reg' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
330 | memstick_init_req(&card->current_mrq, MS_TPC_READ_REG, &id_reg,
| ^~~~~~
Commit de182cc8e8 ("drivers/memstick/core/memstick.c: avoid -Wnonnull
warning") intentionally passed this variable uninitialized to avoid an
-Wnonnull warning from a NULL value that was previously there because
id_reg is never read from the call to memstick_init_req() in
h_memstick_read_dev_id(). Just zero initialize id_reg to avoid the
warning, which is likely happening in the majority of builds using
modern compilers that support '-ftrivial-auto-var-init=zero'.
Cc: stable@vger.kernel.org
Fixes: de182cc8e8 ("drivers/memstick/core/memstick.c: avoid -Wnonnull warning")
Link: 00dacf8c22 [1]
Closes: https://github.com/ClangBuiltLinux/linux/issues/2105
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250715-memstick-fix-uninit-const-pointer-v1-1-f6753829c27a@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 188c6ba1dd925849c5d94885c8bbdeb0b3dcf510 upstream.
The nbpf->chan[] array is allocated earlier in the nbpf_probe() function
and it has "num_channels" elements. These three loops iterate one
element farther than they should and corrupt memory.
The changes to the second loop are more involved. In this case, we're
copying data from the irqbuf[] array into the nbpf->chan[] array. If
the data in irqbuf[i] is the error IRQ then we skip it, so the iterators
are not in sync. I added a check to ensure that we don't go beyond the
end of the irqbuf[] array. I'm pretty sure this can't happen, but it
seemed harmless to add a check.
On the other hand, after the loop has ended there is a check to ensure
that the "chan" iterator is where we expect it to be. In the original
code we went one element beyond the end of the array so the iterator
wasn't in the correct place and it would always return -EINVAL. However,
now it will always be in the correct place. I deleted the check since
we know the result.
Cc: stable@vger.kernel.org
Fixes: b45b262cef ("dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/b13c5225-7eff-448c-badc-a2c98e9bcaca@sabinyo.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55f0bfc0370539213202f4ce1a07615327ac4713 upstream.
When MSG_DONTWAIT is not set, the tpacket_snd operation will wait for
pending_refcnt to decrement to zero before returning. The pending_refcnt
is decremented by 1 when the skb->destructor function is called,
indicating that the skb has been successfully sent and needs to be
destroyed.
If an error occurs during this process, the tpacket_snd() function will
exit and return error, but pending_refcnt may not yet have decremented to
zero. Assuming the next send operation is executed immediately, but there
are no available frames to be sent in tx_ring (i.e., packet_current_frame
returns NULL), and skb is also NULL, the function will not execute
wait_for_completion_interruptible_timeout() to yield the CPU. Instead, it
will enter a do-while loop, waiting for pending_refcnt to be zero. Even
if the previous skb has completed transmission, the skb->destructor
function can only be invoked in the ksoftirqd thread (assuming NAPI
threading is enabled). When both the ksoftirqd thread and the tpacket_snd
operation happen to run on the same CPU, and the CPU trapped in the
do-while loop without yielding, the ksoftirqd thread will not get
scheduled to run. As a result, pending_refcnt will never be reduced to
zero, and the do-while loop cannot exit, eventually leading to a CPU soft
lockup issue.
In fact, skb is true for all but the first iterations of that loop, and
as long as pending_refcnt is not zero, even if incremented by a previous
call, wait_for_completion_interruptible_timeout() should be executed to
yield the CPU, allowing the ksoftirqd thread to be scheduled. Therefore,
the execution condition of this function should be modified to check if
pending_refcnt is not zero, instead of check skb.
- if (need_wait && skb) {
+ if (need_wait && packet_read_pending(&po->tx_ring)) {
As a result, the judgment conditions are duplicated with the end code of
the while loop, and packet_read_pending() is a very expensive function.
Actually, this loop can only exit when ph is NULL, so the loop condition
can be changed to while (1), and in the "ph = NULL" branch, if the
subsequent condition of if is not met, the loop can break directly. Now,
the loop logic remains the same as origin but is clearer and more obvious.
Fixes: 89ed5b5190 ("af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET")
Cc: stable@kernel.org
Suggested-by: LongJun Tang <tanglongjun@kylinos.cn>
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1ba3c0cbdb5e53a8ec5d708e99cd4c497028a13 upstream.
Due to the changes in commit 581073f626e3 ("af_packet: do not call
packet_read_pending() from tpacket_destruct_skb()"), every time
tpacket_destruct_skb() is executed, the skb_completion is marked as
completed. When wait_for_completion_interruptible_timeout() returns
completed, the pending_refcnt has not yet been reduced to zero.
Therefore, when ph is NULL, the wait function may need to be called
multiple times until packet_read_pending() finally returns zero.
We should call sock_sndtimeo() only once, otherwise the SO_SNDTIMEO
constraint could be way off.
Fixes: 581073f626e3 ("af_packet: do not call packet_read_pending() from tpacket_destruct_skb()")
Cc: stable@kernel.org
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53b6445ad08f07b6f4a84f1434f543196009ed89 upstream.
Hardware CS has a very slow rise time of about 6us,
causing transmission errors when CS does not reach
high between transaction.
It looks like it's not driven actively when transitioning
from low to high but switched to input, so only the CPU
pull-up pulls it high, slowly. Transitions from high to low
are fast. On the oscilloscope, CS looks like an irregular sawtooth
pattern like this:
_____
^ / |
^ /| / |
/| / | / |
/ | / | / |
___/ |___/ |_____/ |___
With cs-gpios we have a CS rise time of about 20ns, as it should be,
and CS looks rectangular.
This fixes the data errors when running a flashcp loop against a
m25p40 spi flash.
With the Rockchip 6.1 kernel we see the same slow rise time, but
for some reason CS is always high for long enough to reach a solid
high.
The RK3399 and RK3588 SoCs use the same SPI driver, so we also
checked our "Puma" (RK3399) and "Tiger" (RK3588) boards.
They do not have this problem. Hardware CS rise time is good.
Fixes: c484cf93f6 ("arm64: dts: rockchip: add PX30-µQ7 (Ringneck) SoM with Haikou baseboard")
Cc: stable@vger.kernel.org
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
Link: https://lore.kernel.org/r/20250627131715.1074308-1-jakob.unterwurzacher@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbe94be09fa81343d623a86ec64a742759b669b3 upstream.
LDO5 regulator is used to power the i.MX8MM NVCC_SD2 I/O supply, that is
used for the SD2 card interface and also for some GPIOs.
When the SD card interface is not enabled the regulator subsystem could
turn off this supply, since it is not used anywhere else, however this
will also remove the power to some other GPIOs, for example one I/O that
is used to power the ethernet phy, leading to a non working ethernet
interface.
[ 31.820515] On-module +V3.3_1.8_SD (LDO5): disabling
[ 31.821761] PMIC_USDHC_VSELECT: disabling
[ 32.764949] fec 30be0000.ethernet end0: Link is Down
Fix this keeping the LDO5 supply always on.
Cc: stable@vger.kernel.org
Fixes: 6a57f224f7 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Fixes: f5aab0438ef1 ("regulator: pca9450: Fix enable register for LDO5")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0bdaca0922175478ddeadf8e515faa5269f6fae6 upstream.
The IMX8MPDS Table 37 [1] shows that the max SPI master read frequency
depends on the pins the interface is muxed behind with ECSPI2
muxed behind ECSPI2 supporting up to 25MHz.
Adjust the spi-max-frequency based on these findings.
[1] https://www.nxp.com/webapp/Download?colCode=IMX8MPIEC
Fixes: 531936b218 ("arm64: dts: imx8mp-venice-gw74xx: update to revB PCB")
Cc: stable@vger.kernel.org
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17ba793f381eb813596d6de1cc6820bcbda5ed8b upstream.
A new warning in clang [1] points out a place in pep_sock_accept() where
dst is uninitialized then passed as a const pointer to pep_find_pipe():
net/phonet/pep.c:829:37: error: variable 'dst' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
829 | newsk = pep_find_pipe(&pn->hlist, &dst, pipe_handle);
| ^~~:
Move the call to pn_skb_get_dst_sockaddr(), which initializes dst, to
before the call to pep_find_pipe(), so that dst is consistently used
initialized throughout the function.
Cc: stable@vger.kernel.org
Fixes: f7ae8d59f6 ("Phonet: allocate sock from accept syscall rather than soft IRQ")
Link: 00dacf8c22 [1]
Closes: https://github.com/ClangBuiltLinux/linux/issues/2101
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20250715-net-phonet-fix-uninit-const-pointer-v1-1-8efd1bd188b3@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7cafd5b81cc07fb402e3068d134c21e60ea688c upstream.
8c8492ca64e7 ("io_uring/net: don't retry connect operation on EPOLLERR")
is a little dirty hack that
1) wrongfully assumes that POLLERR equals to a failed request, which
breaks all POLLERR users, e.g. all error queue recv interfaces.
2) deviates the connection request behaviour from connect(2), and
3) racy and solved at a wrong level.
Nothing can be done with 2) now, and 3) is beyond the scope of the
patch. At least solve 1) by moving the hack out of generic poll handling
into io_connect().
Cc: stable@vger.kernel.org
Fixes: 8c8492ca64e79 ("io_uring/net: don't retry connect operation on EPOLLERR")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3dc89036388d602ebd84c28e5042e457bdfc952b.1752682444.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83261934015c434fabb980a3e613b01d9976e877 upstream.
Commit 42cdf6f687 ("drm/amdgpu/gfx8: always restore kcq MQDs") made the
ring pointer always to be reset on resume from suspend. This caused compute
rings to fail since the reset was done without also resetting it for the
firmware. Reset wptr on the GPU to avoid a disconnect between the driver
and firmware wptr.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3911
Fixes: 42cdf6f687 ("drm/amdgpu/gfx8: always restore kcq MQDs")
Signed-off-by: Eeli Haapalainen <eeli.haapalainen@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2becafc319db3d96205320f31cc0de4ee5a93747)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85a3bce695b361d85fc528e6fbb33e4c8089c806 upstream.
We have observed kernel panics when using timerlat with stack saving,
with the following dmesg output:
memcpy: detected buffer overflow: 88 byte write of buffer size 0
WARNING: CPU: 2 PID: 8153 at lib/string_helpers.c:1032 __fortify_report+0x55/0xa0
CPU: 2 UID: 0 PID: 8153 Comm: timerlatu/2 Kdump: loaded Not tainted 6.15.3-200.fc42.x86_64 #1 PREEMPT(lazy)
Call Trace:
<TASK>
? trace_buffer_lock_reserve+0x2a/0x60
__fortify_panic+0xd/0xf
__timerlat_dump_stack.cold+0xd/0xd
timerlat_dump_stack.part.0+0x47/0x80
timerlat_fd_read+0x36d/0x390
vfs_read+0xe2/0x390
? syscall_exit_to_user_mode+0x1d5/0x210
ksys_read+0x73/0xe0
do_syscall_64+0x7b/0x160
? exc_page_fault+0x7e/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
__timerlat_dump_stack() constructs the ftrace stack entry like this:
struct stack_entry *entry;
...
memcpy(&entry->caller, fstack->calls, size);
entry->size = fstack->nr_entries;
Since commit e7186af7fb ("tracing: Add back FORTIFY_SOURCE logic to
kernel_stack event structure"), struct stack_entry marks its caller
field with __counted_by(size). At the time of the memcpy, entry->size
contains garbage from the ringbuffer, which under some circumstances is
zero, triggering a kernel panic by buffer overflow.
Populate the size field before the memcpy so that the out-of-bounds
check knows the correct size. This is analogous to
__ftrace_trace_stack().
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Attila Fazekas <afazekas@redhat.com>
Link: https://lore.kernel.org/20250716143601.7313-1-tglozar@redhat.com
Fixes: e7186af7fb ("tracing: Add back FORTIFY_SOURCE logic to kernel_stack event structure")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5e8acc14dcb314a9b61ff19dcd9fdd0d88f70df upstream.
When a module is loaded, it adds trace events defined by the module. It
may also need to modify the modules trace printk formats to replace enum
names with their values.
If two modules are loaded at the same time, the adding of the event to the
ftrace_events list can corrupt the walking of the list in the code that is
modifying the printk format strings and crash the kernel.
The addition of the event should take the trace_event_sem for write while
it adds the new event.
Also add a lockdep_assert_held() on that semaphore in
__trace_add_event_dirs() as it iterates the list.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250718223158.799bfc0c@batman.local.home
Reported-by: Fusheng Huang(黄富生) <Fusheng.Huang@luxshare-ict.com>
Closes: https://lore.kernel.org/all/20250717105007.46ccd18f@batman.local.home/
Fixes: 110bf2b764 ("tracing: add protection around module events unload")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d0777ccaa2d46609d05b66ba0096802a2746193 upstream.
The low level transport driver expects the first byte to be the report
ID, even when the report ID is not use (in which case they just shift
the buffer).
However, __hid_request() whas not offsetting the buffer it used by one
in this case, meaning that the raw_request() callback emitted by the
transport driver would be stripped of the first byte.
Note: this changes the API for uhid devices when a request is made
through hid_hw_request. However, several considerations makes me think
this is fine:
- every request to a HID device made through hid_hw_request() would see
that change, but every request made through hid_hw_raw_request()
already has the new behaviour. So that means that the users are
already facing situations where they might have or not the first byte
being the null report ID when it is 0. We are making things more
straightforward in the end.
- uhid is mainly used for BLE devices
- uhid is also used for testing, but I don't see that change a big issue
- for BLE devices, we can check which kernel module is calling
hid_hw_request()
- and in those modules, we can check which are using a Bluetooth device
- and then we can check if the command is used with a report ID or not.
- surprise: none of the kernel module are using a report ID 0
- and finally, bluez, in its function set_report()[0], does the same
shift if the report ID is 0 and the given buffer has a size > 0.
[0] https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/profiles/input/hog-lib.c#n879
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Closes: https://lore.kernel.org/linux-input/c75433e0-9b47-4072-bbe8-b1d14ea97b13@rowland.harvard.edu/
Reported-by: syzbot+8258d5439c49d4c35f43@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8258d5439c49d4c35f43
Tested-by: syzbot+8258d5439c49d4c35f43@syzkaller.appspotmail.com
Fixes: 4fa5a7f76c ("HID: core: implement generic .request()")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250710-report-size-null-v2-2-ccf922b7c4e5@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
